Commit graph

179 commits

Author SHA1 Message Date
Ivan Grokhotkov
ee600784c5 sdmmc: add SDIO support
- Add SDIO support at protocol layer (probing, data transfer, interrupts)
- Add SDIO interrupts support in SDMMC host
- Add test (communicate with ESP32 in SDIO download mode)
2018-04-11 11:07:13 +08:00
Ivan Grokhotkov
2522c1b2f9 Merge branch 'bugfix/rtc_clk_fixes' into 'master'
Power management and RTC fixes

See merge request idf/esp-idf!2131
2018-04-10 18:17:02 +08:00
Angus Gratton
53234ef2bc Merge branch 'refactor/rtc_split_module' into 'master'
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.

See merge request idf/esp-idf!1848
2018-04-04 09:00:58 +08:00
Angus Gratton
da27816314 Merge branch 'feat/add_efuse_cpu_freq_rating' into 'master'
efuse/add cpu freq rating

See merge request idf/esp-idf!1994
2018-03-29 05:59:52 +08:00
Michael (Xiao Xufeng)
cef8baf424 bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.
refactor structure of ``rtc_module.c`` to make it more clearly.

Closes https://github.com/espressif/esp-idf/issues/1517
2018-03-28 17:10:01 +08:00
Ivan Grokhotkov
b007b89b84 soc/io_mux: make CLK_OUT fields compatible with REG_SET/GET_FIELD 2018-03-27 12:10:18 +08:00
Ivan Grokhotkov
43b5fdd5c9 soc/rtc: fix switching between 80/160 and 240MHz
Previous code contained a check for PLL frequency to be 240MHz, while
in fact 240MHz was a CPU frequency; corresponding PLL frequency is
480MHz. Fixed the comparison and replaced integer MHz values with an
enum.
2018-03-27 10:55:59 +08:00
Ivan Grokhotkov
48d55e22e7 soc/rtc: run 32k XTAL startup test only in PSRAM config
PSRAM tests run on ESP-WROVER-KIT boards, which have the 32k XTAL
installed.
2018-03-26 10:14:13 +08:00
Ivan Grokhotkov
887b6e2925 Merge branch 'bugfix/rtc_clk_32k_bootstrap' into 'master'
bugfix/rtc_clk_32k_bootstrap: Fix starting 32k RTC

See merge request idf/esp-idf!2085
2018-03-21 18:38:49 +08:00
Konstantin Kondrashov
f7df532ec0 bugfix/rtc_clk_32k_bootstrap: Fix starting 32k RTC
1. External 32kHz crystal is started for too long or it may not start at all. It is often observed at the first start.
2. At the first start, it is possible that the crystal did not start. And the recorded period was recorded as 0. Which led to a division error by zero during the transition to the deep sleep mode (Maybe somewhere else).
3. Added a unit test to test a new method of oscillation an external crystal.
4. Added a new method of oscillating of an external crystal. The legs of the crystal are fed with a 32 kHz frequency.

The new method eliminates these errors.

Added unit test: `\esp-idf\components\soc\esp32\test\test_rtc_clk.c`: `make TEST_COMPONENTS=soc`
- 8 Test starting external RTC crystal. Will pass.

`Bootstrap cycles for external 32kHz crystal` - is specified in the file Kconfig by default 100.

QA tested a new method of oscillation the crystal on 25 boards. The supply of square waves on the crystal showed a 100% result in contrast to the previous method of launching the crystal. After the tests, the old method was deleted.

Closes TW19143
2018-03-21 13:27:56 +05:00
Ivan Grokhotkov
1618dbc9a5 soc/rtc: wait for frequency switch to complete
The fast path of CPU frequency switch function, used in DFS, was not
waiting for the frequency switch to complete when switching from XTAL
to PLL. This resulted in incorrect reads from peripherals on APB,
where two consecutive reads could return the same value. For example,
in esp_timer, read of FRC_COUNT_REG would return same value as the
preceding read of FRC_ALARM_REG, causing time to jump by the value of
FRC_ALARM_REG / apb_freq_mhz.
2018-03-20 18:27:32 +08:00
Darian Leung
8b1277c55f efuse/add cpu freq rating
This commit adds support for CPU max freqeuency rating
bits in CPU. Bootloader will now print an error if attempting
to 160MHz rated ESP32 at 240MHz.

EFUSE_CHIP_VER_RESERVE has been replaced by the
frequency rating bits. Dependancies on EFUSE_CHIP_VER_RESERVE
have been changed to use EFUSE_CHIP_VER_PKG
2018-03-07 12:16:51 +08:00
Darian Leung
0c9e2c0fba esp_adc_cal/Remove lookup table
This commit removes the lookup table mode due to inferior performance when compared
to linear mode under attenuation 0, 1 and 2. However small portions of the lookup table
are kept for the higher voltages of atten 3 (above ADC reading 2880). That voltage range
in atten 3 has non linear characteristics making the LUT performan better than linear mode.
2018-02-22 20:01:41 +08:00
Darian Leung
73cdfbfe79 esp_adc_cal/Add eFuse functionality
This commit updates the esp_adc_cal ocmponent to support new calibration methods
which utilize calibratoin values stored in eFuse. This commit includes LUT mode
2018-02-13 21:22:48 +08:00
Ivan Grokhotkov
e381c6adde Merge branch 'bugfix/fix_i2s_adc_mode' into 'master'
driver(i2s): fix broken i2s adc mode

See merge request idf/esp-idf!1653
2018-02-11 12:58:58 +08:00
Wangjialin
451f69cc2e driver(i2s): fix broken i2s adc mode
1. Move i2s reset code from i2s_stop to i2s_start.
2. add RTC API to set sw mode for ADC
3. add description for adc_power_always_on()
4. add lock for i2s dma and RTC ADC functions.
5. add ADC read task in example

reported from bbs:  https://esp32.com/viewtopic.php?f=13&t=3490&p=17522#p17522
reported from github: https://github.com/espressif/esp-idf/issues/1333
2018-02-07 17:17:20 +08:00
Jeroen Domburg
70ab924dbb Especially when internal memory fills up, some FreeRTOS structures (queues etc) get allocated in psram. These structures also contain a spinlock, which needs an atomic-compare-swap operation to work. The psram hardware, however, does not support this operation. As a workaround, this patch detects these spinlocks and will, instead of S32C1I, use equivalent C-code to simulate the behaviour, with an (internal) mux for atomicity. 2018-02-02 17:11:06 +08:00
Angus Gratton
4297c337f9 esp32: Add IO_MUX_GPIOxx register names to match iomux names used in TRM
The TRM describes IOMUX registers are IO_MUX_x_REG for x in GPIO0-39.

Until now ESP-IDF describes them as PERIPHS_IO_MUX_(pinname)_U

This commit adds additional IOMUX register names which match the ones used in the TRM.
2018-01-30 17:09:37 +08:00
Ivan Grokhotkov
ffaf145056 Merge branch 'bugfix/xtal_freq_estimation' into 'master'
soc/rtc_clk: fix loss of precision in estimation of XTAL frequency

See merge request !1763
2018-01-23 15:37:47 +08:00
kooho
492db0591d Fix uart fifo overflow bug 2018-01-12 14:42:54 +08:00
Ivan Grokhotkov
914ab07567 Merge branch 'feature/ulp_i2c_reg' into 'master'
soc,ulp: add register definitions of RTC_I2C peripheral

See merge request !1762
2018-01-11 12:08:25 +08:00
Deng Xin
337f790fd3 bug fix of assert happen in PSRAM 2018-01-09 20:01:06 +08:00
Ivan Grokhotkov
7c584e80b0 soc/rtc_clk: fix loss of precision in estimation of XTAL frequency
RTC_FAST_CLK_FREQ_APPROX is defined as 8500000, so 0.5MHz part was lost
when dividing by MHZ. Since cal_val is 64-bit the parens can be removed.

With 40MHz XTAL for a nominal ESP32 chip, this fixes estimated XTAL
frequency from 38 to 40MHz.
2018-01-08 23:31:21 +08:00
Ivan Grokhotkov
dba291416f soc,ulp: add register definitions of RTC_I2C peripheral 2018-01-08 21:28:14 +08:00
Angus Gratton
c69af42b96 esp32: Fix backwards compatibility for pre-v2.1 bootloaders
Older bootloaders don't set RTC_XTAL_FREQ_REG or call rtc_clk_init(),
app needs to pick this up.

Reported at
https://esp32.com/viewtopic.php?f=2&t=3939&p=17836
2017-12-18 13:45:57 +11:00
Ivan Grokhotkov
a99483a727 docs: add information about execution time of ULP instructions 2017-12-11 14:05:41 +08:00
Ivan Grokhotkov
ca751648fa ulp: document the need to wait for RTC to be ready for wakeup 2017-12-11 12:11:46 +08:00
krzychb
421592a8eb LEDC Driver: Added back original definitions of 'duty_resolution' and 'clock_divider'. This update is to provide backward compatibility with ESP-IDF 2.1. 2017-12-04 21:12:56 +01:00
Jiang Jiang Jian
c672fc54fd Merge branch 'feature/ledc_more_meaningful_parameter_names' into 'master'
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resoluti…

See merge request !1440
2017-12-01 19:33:53 +08:00
Vitor Massaru Iha
cf768380b1 soc: Remove redefinition of MCU_SEL_M
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>

Merges #1290
2017-11-22 11:01:42 +08:00
Ivan Grokhotkov
3369f15fa3 soc/rtc: don't power down BIAS_I2C along with APLL if other PLL is used
If enable == false, and SOC_CLK_SEL == PLL, the code would would
erroneously set RTC_CNTL_BIAS_I2C_FORCE_PD. This change fixes the logic.
2017-11-20 15:27:16 +08:00
krzychb
d488bb7bac Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider' 2017-11-15 08:08:12 +01:00
Ivan Grokhotkov
f22c681c1c soc/rtc: raise core voltage when 80MHz flash frequency is used
To achieve reliable operation with GD flash at 80MHz, need to raise
core voltage.
This causes the following current consumption increase:

At 80MHz: from 29mA to 33mA
At 160MHz: from 41mA to 47mA

Test conditions: 2 cores running code from IRAM, remaining peripherals
clock gated.
2017-11-08 21:13:02 +08:00
Jiang Jiang Jian
abacf8d2a0 Merge branch 'bugfix/rtc_and_restart_fixes' into 'master'
rtc_clk and esp_restart fixes

See merge request !1458
2017-11-04 01:34:38 +08:00
Ivan Grokhotkov
a02b30ccda efuse: add package definitions for PICOD2/D4 2017-11-03 15:49:10 +08:00
Ivan Grokhotkov
fb9c106bcb soc/rtc: add function to get/set VDDSDIO configuration
Also consider case of VDDSDIO force powered on in rtc_sleep.
2017-11-03 15:49:09 +08:00
Ivan Grokhotkov
5a294c9acd soc/gpio: fix description of GPIO_STRAP_REG 2017-11-03 15:49:09 +08:00
Ivan Grokhotkov
80eb3b6ddb Merge branch 'bugfix/light_sleep_current' into 'master'
soc/rtc: fix increased current consumption in light sleep

See merge request !1483
2017-11-02 18:26:23 +08:00
XiaXiaotian
42cefc173f refractor WiFi clock setting
Do not set WiFi clock in PHY initializing function, move it to WiFi
   start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92 component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
Ivan Grokhotkov
9bfb45aa1d soc/rtc: fix increased current consumption in light sleep
This fixes a configuration issue of RTC, which caused light sleep current
to be 1.35mA instead of 0.85mA.
2017-11-02 13:57:26 +08:00
Ivan Grokhotkov
eb5752c635 esp_restart: fix possible race while stalling other CPU, enable WDT early
Previously esp_restart would stall the other CPU before enabling RTC_WDT.
If the other CPU was executing an s32c1i instruction, the lock signal
from CPU to the arbiter would still be held after CPU was stalled. If
the CPU running esp_restart would then try to access the same locked
memory pool, it would be stuck, because lock signal would never be
released.

With this change, esp_restart resets the other CPU before stalling it.
Ideally, we would want to reset the CPU and keep it in reset, but the
hardware doesn't have such feature for PRO_CPU (it is possible to hold
APP_CPU in reset using DPORT register). Given that ROM code will not use
s32c1i in the first few hundred cycles, doing reset and then stall seems
to be safe.

In addition to than, RTC_WDT initialization is moved to the beginning of
the function, to prevent possible lock-up if CPU stalling still has any
issue.
2017-10-26 19:53:53 +08:00
Ivan Grokhotkov
f11ad0c904 soc/rtc: fix spurious warnings about XTAL frequency on startup
1. Make sure that 8MD256 clock used to estimate XTAL frequency is enabled
   before trying to use rtc_clk_cal_ratio.
   This fixes "Bogus XTAL frequency: 0 MHz" warnings after software reset.

2. Don't call rtc_clk_xtal_freq_estimate if XTAL frequency is already
   known. This reduces startup time after deep sleep or software reset.

3. Compare known XTAL frequency and estimated one before printing a
   warning. This fixes "Possibly invalid CONFIG_ESP32_XTAL_FREQ setting
   (40MHz). Detected 40 MHz." warnings.
2017-10-26 19:53:53 +08:00
Ivan Grokhotkov
9317cb3434 soc/rtc: add tests for CPU frequency switching
These tests switch between PLL and XTAL frequencies for 10 seconds.
2017-10-26 19:53:53 +08:00
Ivan Grokhotkov
6d4ed4ff6c soc/rtc: wait for SLOW_CLK cycle when switching CPU clock
Previous implementation waited for 20us after setting
RTC_CNTL_SOC_CLK_SEL_XTL register, using ets_delay_us, assuming that
the CPU was running at XTAL frequency. In reality, clock switch happened
on the next RTC_SLOW_CLK cycle, and CPU could be running at the previous
frequency (for example, 240 MHz) until then.
ets_delay_us would wait for 20 us * 40 cycles per us = 800 CPU cycles
(assuming 40 MHz XTAL; even less with a 26 MHz XTAL).
But if CPU was running at 240 MHz, 800 cycles would pass in just 3.3us,
while SLOW_CLK cycle could happen as much as 1/150kHz = 6.7us after
RTC_CNTL_SOC_CLK_SEL_XTL was set. So the software would not actually wait
long enough for the clock switch to happen, and would disable the PLL
while CPU was still clocked from PLL, leading to a halt.

This implementation uses rtc_clk_wait_for_slow_cycle() function to wait
until the clock switch, removing the need to wait for a fixed number of
CPU cycles.
2017-10-26 19:53:53 +08:00
Ivan Grokhotkov
05a0fbd49b soc/rtc: add a function to wait for slow clock cycle
Some RTC features are synchronized to RTC_SLOW_CLK, so sometimes
software needs to wait for the next slow clock cycle.
This function implements waiting using Timer Group clock calibration
feature.
2017-10-26 19:53:53 +08:00
esp32de
7c0020bfd0 feat(adc2): append adc2 support and api and the lock with WIFI module
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request !1189
2017-10-22 12:34:11 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Ivan Grokhotkov
099565635b soc: correct values of SOC_BYTE_ACCESSIBLE_LOW, SOC_MEM_INTERNAL_LOW
Internal byte accessible memory starts with Internal ROM 1 at 0x3FF90000.
Region of RTC fast memory starting at 0x3FF80000 is not used in IDF as
it is mapped to PRO CPU only.
2017-10-19 21:35:21 +08:00
Ivan Grokhotkov
fba9678c56 uart: add support for REF_TICK 2017-10-18 14:19:20 +08:00
Ivan Grokhotkov
b03e08dc4e soc/rtc: add function to convert CPU frequency in MHz to rtc_cpu_freq_t 2017-10-18 14:19:15 +08:00
Ivan Grokhotkov
a242ae6d0b soc/rtc: add fast paths for switching between PLL and XTAL 2017-10-18 14:19:14 +08:00
Jeroen Domburg
740f8a79f0 Add logic to make external RAM usable with malloc() 2017-09-28 17:17:50 +08:00
michael
9d9e771933 fix(global, log): fix esp_log(_early)_timestamp readings after startup by correct the CCOUNT register when switching CPU clock.
TW#13332, Closes #700
2017-09-26 15:18:17 +08:00
Tian Hao
3e2ee24e4f component/bt : support bluetooth controller DRAM release dynamically
1. remove CONFIG_BT_DRAM_RELEASE from Kconfig
2. add API to release bluetooth controller DRAM to heap
2017-09-21 14:31:20 +08:00
michael
8244fa95fe feat(log): add new function to log buffer with level and hex dump. 2017-09-18 11:44:54 +08:00
Wangjialin
2fceec4d85 feature(I2S-ADC): add ADC mode for I2S.
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Jeroen Domburg
875ae6a134 Add option to allocate external RAM using heap_alloc_caps 2017-09-14 10:47:44 +08:00
Ivan Grokhotkov
1e7c3854d3 Merge branch 'bugfix/warn_on_invalid_xtal_freq' into 'master'
soc/rtc: warn if detected XTAL frequency does not match configured one

See merge request !1242
2017-09-11 18:15:11 +08:00
Ivan Grokhotkov
de038f502c Merge branch 'feature/gpio_channel_macro' into 'master'
feat(global): add macros for GPIO->channel lookup

See merge request !1170
2017-09-11 12:15:08 +08:00
Ivan Grokhotkov
5a88f90a33 soc/rtc: warn if detected XTAL frequency does not match configured one
Since 9a8c0392, XTAL frequency is set to 40MHz by default, and users
of 26MHz boards need to select 26MHz manually. Most users are not aware
of this change, and existing getting started guides do not mention that
XTAL frequency needs to be set for some boards. So users are left with
garbage output from UART without any clue what to check.

This change adds a warning in case specific XTAL frequency was set, and
it does not match automatically detected one. This should help users
fix the issue.
2017-09-11 11:42:26 +08:00
Angus Gratton
1c7b8aa3a5 Heap tracing support 2017-09-07 16:32:05 +10:00
michael
08b9fbc242 feat(global): add macros for GPIO->channel lookup
including: macros for dac, adc, touch, rtc_gpio, uart and clk_out.

TW#13970
2017-09-07 10:40:25 +08:00
Jeroen Domburg
34372a091c Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
Ivan Grokhotkov
5666fc0a56 Merge branch 'feature/esp_timer_improvements' into 'master'
esp_timer improvements

See merge request !1172
2017-09-01 16:14:01 +08:00
Ivan Grokhotkov
d2acf1ce77 sleep: add light sleep, factor out APIs common for deep/light sleep 2017-09-01 10:36:14 +08:00
Ivan Grokhotkov
f8b719d911 soc/rtc: add sleep flag to control powerdown of VDD_SDIO 2017-09-01 10:36:14 +08:00
Ivan Grokhotkov
c743bdac88 soc/rtc: round APB clock frequency to nearest MHz 2017-09-01 10:34:36 +08:00
Ivan Grokhotkov
a25eb825e1 Merge branch 'bugfix/dport_protect_crypto' into 'master'
add protection for crypto registers in DPORT

See merge request !928
2017-08-30 11:45:35 +08:00
Ivan Grokhotkov
547ef83020 Merge branch 'feature/disable_some_perip_clk_when_cpu_start' into 'master'
Disable some peripheral clocks when cpu starts

See merge request !1089
2017-08-30 11:43:38 +08:00
XiaXiaotian
4776f73ca4 Disable some peripheral clocks when cpu starts
All peripheral clocks are default enabled after chip is powered on.
    When CPU starts, if reset reason is CPU reset, disable those clocks
    that are not enabled before reset. Otherwise, disable all those
    useless clocks.
    These peripheral clocks must be enabled when the peripherals are
    initialized and disabled when they are deinitialized.
2017-08-29 11:18:42 +08:00
michael
c7173e0d08 fix(struct_h): add extern "C" protection to *_struct.h header files. 2017-08-28 18:10:46 +08:00
Ivan Grokhotkov
82763a02af Merge branch 'feature/ets_timer' into 'master'
esp_timer: add high-resolution timer api

See merge request !1090
2017-08-28 16:38:11 +08:00
Ivan Grokhotkov
d8b66e5088 soc: release interrupts which are not reserved by timers any more 2017-08-28 11:35:27 +08:00
Ivan Grokhotkov
b636f81619 Merge branch 'bugfix/spi_command' into 'master'
fix(spi_master): fix the command field to make it more intuitive to use.

See merge request !1119
2017-08-28 10:29:56 +08:00
Angus Gratton
2624e10055 esp32 hwcrypto: Use AES registers directly 2017-08-25 16:08:03 +10:00
Angus Gratton
cb31222e8b dport access: Add _DPORT_REG_SET_BIT & _DPORT_REG_CLR_BIT 2017-08-25 16:08:02 +10:00
Ivan Grokhotkov
08287852ab esp32: add protection for DPORT registers of RSA 2017-08-25 16:08:02 +10:00
Ivan Grokhotkov
a66df0826e soc: fix/update definitions related to FRC timers
1. BIT(8) of CTRL is actually read-only bit indicating interrupt status

2. BIT(0) or CTRL had inverted meaning: 1 is “level”, 0 is “edge”

3. Add definitions of prescaler values
2017-08-24 16:33:12 +08:00
Wang Jia Lin
f1ecffb46c Merge branch 'bugfix/touch_pad_driver' into 'master'
driver(touch): fix bug and add more features

See merge request !1056
2017-08-23 19:12:39 +08:00
Wangjialin
842caaab21 driver(touch): fix bug and add more features
1. add sens_struct.h
2. add definition of RTCCNTL and RTCIO
3. modify touch pad examples
4. update example code.
5. add comments add option in menuconfig
6. fix issue that pad index 8 and 9 are mismatched
7. add touch_pad_read_filtered() api to get value filtered by iir filter
8. modify touch pad isr func
9. Make the items in perihperal.ld in the sequence of address
10. delete Kconfig for touch pad
11. add touchpad filter APIs to adjust the filter
12. add touch_pad into index.rst
13. add touch_pad in Doxyfile
14. add touch_pad.rst
2017-08-22 21:21:39 +08:00
michael
4c9754726f fix(spi_master): fix the command field to make it more intuitive to use. 2017-08-21 20:37:57 +08:00
michael
ed1d084aea fix(spi_master): make the address field more intuitive to use.
The address field should be placed at the highest bits of address and slv_wr_status registers. Instead of breaking the address into two parts and fill in each register, move the address to the highest bits and write to the registers respectively.

Breaking change: if you fill-in the SPI address filed in a previous version in some way and it works correctly, you still have to rewrite the address, in a more intuitive way.
2017-08-15 14:49:31 +08:00
michael
99769f0b00 fix(spi_master): fix the bug that VSPI no respond when host changed
from HSPI to VSPI, and vice versa.

fix the SPI control bits written wrong in the headers.

TW#12123, Github#477
2017-07-21 14:50:17 +08:00
Angus Gratton
17adb40ca8 bootloader: Calculate SHA256 hash of image on every boot
Makes app image booting more reliable (256-bit rather than 8-bit verification.)

Some measurements, time to boot a 655KB app.bin file and run to app_main() execution.

(All for rev 1 silicon, ie no 340ms spurious WDT delay.)

80MHz QIO mode:
before = 300ms
after = 140ms

40MHz DIO mode:
before = 712ms
after = 577ms

40MHz DIO mode, secure boot enabled
before = 1380ms
after = 934ms

(Secure boot involves two ECC signature verifications (partition table, app) that take approx 300ms each with 80MHz CPU.)
2017-07-19 18:31:59 +10:00
Ivan Grokhotkov
0ae916d555 Merge branch 'feature/high_level_interrupts' into 'master'
Break out high-level interrupts so a component can override them

See merge request !675
2017-07-18 10:42:31 +08:00
Ivan Grokhotkov
7fc25f18d2 Merge branch 'feature/enable_brownout_detector' into 'master'
Enable brownout detector

See merge request !811
2017-07-13 11:40:37 +08:00
Angus Gratton
ad60c30de0 heap: Rename memory "tags" to "types" to avoid confusion w/ old tag allocator API 2017-07-10 17:46:03 +08:00
Angus Gratton
8d7074ed5c soc: Move esp_ptr_dma_capable() function to soc_memory_layout.h 2017-07-10 17:46:03 +08:00
Angus Gratton
71c70cb15c heap: Refactor heap regions/capabilities out of FreeRTOS
Remove tagged heap API, rename caps_xxx to heap_caps_xxx

Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Angus Gratton
5ee49fd311 heap: Add new multi_heap heap implementation to replace FreeRTOS-based tagged heaps 2017-07-10 17:46:03 +08:00
Ivan Grokhotkov
01b185977c brownout detector: enable by default
Because of errata related to BOD reset function, brownout is handled as follows:

- attach an ISR to brownout interrupt
- when ISR happens, print a message and do a software restart
- esp_restart_nonos enables RTC watchdog, so if restart fails,
  there will be  one more attempt to restart (using the RTC
  watchdog)
2017-07-10 17:25:55 +08:00
Ivan Grokhotkov
780569c04a esp32: fix RTC watchdog configuration in esp_restart
RTC watchdog didn’t have any actions configured for any of the stages.
This change configures it to use SW_SYSTEM_RESET at stage 0 and a
full reset at stage 1. The timeout is now calculated based on
RTC_SLOW_CLK frequency.
2017-07-10 17:21:49 +08:00
Tian Hao
7a79d31db0 fix reg operation missing 2017-07-07 20:04:24 +08:00
Jeroen Domburg
d3290479b2 Merge panic and dport high level interrupt code to both use int level 4 2017-07-07 12:51:33 +08:00
Ivan Grokhotkov
6b2e16e51b soc: fix typo in register name 2017-07-06 12:36:06 +08:00
Jack
ab9f63aba7 fix bug that uart register base address macro was wrong 2017-06-23 19:56:12 +08:00
Tian Hao
09f7cf45dd component/bt : fix interrupt number conflict
1. the typical problem is when push keyboard on serial tool, the bluetooth may stop.
2017-06-15 19:41:54 +08:00
Ivan Grokhotkov
06accaf851 add C++ include guards to header files which are missing them
Fixes https://github.com/espressif/esp-idf/issues/628
2017-05-31 17:20:17 +08:00