michael
5b37a96ddc
feature(sdio): allow to enable internal pullups of the SDIO host and slave as a debug feature
...
NOTE: the internal pullups are not totally reliable, please do add external pullups on your bus.
2018-06-14 12:04:22 +08:00
Michael (XIAO Xufeng)
77077196fd
fix(spi): reset gpios that used by spi when deinited
2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
ebfda40b7c
refactor(spi): move pin information into soc folder
2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
939e5693a5
chore(spi): fix the terms of native to iomux
2018-06-06 06:08:39 +00:00
michael
5cf7d3768d
feat(spi_master): fine tune the timing of SPI
2018-06-06 06:08:39 +00:00
Angus Gratton
c9f8470fdf
Merge branch 'feature/rmt_translator' into 'master'
...
driver(rmt): Add API supports sending uint8_t type data
See merge request idf/esp-idf!1975
2018-05-23 07:27:14 +08:00
Angus Gratton
75c27202f7
Merge branch 'feature/update_touchpad_filter_process' into 'master'
...
driver(touchpad): Change the measuring mode, improve the software filter.
See merge request idf/esp-idf!2358
2018-05-22 09:56:55 +08:00
kooho
5bc8ae3b3a
driver(rmt):Add API supports sending uint8_t type data.
2018-05-22 01:55:44 +00:00
michael
f613859e29
feat(sdio_slave): add new driver for sdio_slave
2018-05-21 23:48:47 +08:00
Wangjialin
09181b7d94
driver(touchpad): improve touchpad filter mode and update examples.
2018-05-21 14:45:31 +08:00
kooho
f6f9f93a9d
driver(i2c, rmt):Add intr_flag setting to ESP_INTR_FLAG_IRAM support when enable psram.
2018-05-21 09:37:56 +08:00
wangmengyang
22e21b38f7
component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
...
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
Roland Dobai
18e83bcd53
Allow VFS file descriptors in select()
2018-05-18 08:06:33 +02:00
Jiang Jiang Jian
cf9499479c
Merge branch 'bugfix/i2s_mix_result_with_error_code_master' into 'master'
...
fix i2s mix result and error code
See merge request idf/esp-idf!2227
2018-05-17 21:53:06 +08:00
Jiang Jiang Jian
8c657dfee4
Merge branch 'bugfix/fix_an_error_in_comment_of_uart_driver' into 'master'
...
deiver(uart):revise the explanation of uart break length
See merge request idf/esp-idf!2398
2018-05-17 17:17:14 +08:00
Zhang Zhao Xiang
9deb58859c
fix i2s mix result and error code
2018-05-17 10:59:04 +08:00
Angus Gratton
b2e264ef52
Merge branch 'feature/ledc_add_api_set_hpoint_val' into 'master'
...
driver(ledc): fix duty and fade issues and add thread-safe version APIs.
See merge request idf/esp-idf!2233
2018-05-16 19:52:26 +08:00
Angus Gratton
fcd5d0869d
Merge branch 'bugfix/spi_native_pins' into 'master'
...
fix several spi issues about pin configurations
See merge request idf/esp-idf!2309
2018-05-15 14:19:20 +08:00
chenjianqiang
b5de860bcb
revise the explain of a parameter(brk_len) in uart driver file
2018-05-14 19:47:16 +08:00
kooho
1bebec05c6
driver(ledc): fix duty and fade issues and add thread-safe version APIs.
...
1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914
2. Fix the duty overflow issue when duty_scale is set to 1.
3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit.
4. Add thread-safe version APIs to set duty and fade.
5. Correct the duty range in driver.
2018-05-14 12:27:21 +08:00
Angus Gratton
64c52022b9
Merge branch 'bugfix/add_comments_for_adc' into 'master'
...
driver(adc): Add descriptions that starting ADC can trigger interrupt of GPIO36…
See merge request idf/esp-idf!1910
2018-05-11 18:54:40 +08:00
kooho
d53661a663
driver(adc): add descriptions for the issue that starting ADC can trigger interrupt of GPIO36 and GPIO39.
2018-05-11 17:08:58 +08:00
Michael (XIAO Xufeng)
1f085b1a3b
feat(gpio): add function allowing switching input source from GPIO back to IOMUX
2018-05-08 15:47:25 +08:00
Angus Gratton
b90ad81f22
driver: Add notes to SPI driver docs about thread safety
2018-05-07 09:03:48 +08:00
Ivan Grokhotkov
52f9a5ca16
Merge branch 'bugfix/sdspi_wp_cd_pins' into 'master'
...
sdmmc, sdspi: fix handling of CD and WP
See merge request idf/esp-idf!2285
2018-04-24 20:53:47 +08:00
Ivan Grokhotkov
2a7d85cfa4
sdmmc, sdspi: fix initializers to be C++-compatible, add test
...
Closes https://github.com/espressif/esp-idf/issues/1861
Closes https://github.com/espressif/arduino-esp32/issues/1312
2018-04-23 14:35:13 +08:00
Ivan Grokhotkov
6185e722c3
Revert "Merge branch 'feature/vfs_select' into 'master'"
...
This reverts merge request !2074
2018-04-20 11:51:41 +08:00
Ivan Grokhotkov
88d0d6ffb0
Merge branch 'feature/vfs_select' into 'master'
...
Allow VFS file descriptors in select()
See merge request idf/esp-idf!2074
2018-04-19 15:06:02 +08:00
Ivan Grokhotkov
b297b72abb
Merge branch 'bugfix/fix_gpio_install_isr_service_check_value' into 'master'
...
driver(gpio): modify return value when gpio ISR service already exists.
See merge request idf/esp-idf!2125
2018-04-19 15:01:50 +08:00
Roland Dobai
6852d653bd
Allow VFS file descriptors in select()
2018-04-17 11:25:30 +02:00
Ivan Grokhotkov
d3fd00c049
Merge branch 'bugfix/spi_miso_on_input_only_pins' into 'master'
...
fix(spi): allow to use MISO on GPIO34-39.
See merge request idf/esp-idf!2136
2018-04-16 14:39:02 +08:00
Angus Gratton
8b3fda99f5
Merge branch 'feature/uart_add_api_get_cmd_position' into 'master'
...
driver(uart): Add API to get the position of cmd_char
See merge request idf/esp-idf!2177
2018-04-16 08:03:25 +08:00
Wang Jia Lin
6c44fc70bc
Merge branch 'feature/gpio_add_hold_support' into 'master'
...
driver(gpio): Add api support digital pad hold function
See merge request idf/esp-idf!2186
2018-04-13 12:18:44 +08:00
Michael (Xiao Xufeng)
45f8bcf3f8
fix(spi): allow using MISO on GPIO34-39
...
Breaking Changes: arguments of ``spicommon_bus_initialize_io`` are changed.
Closes https://github.com/espressif/esp-idf/issues/1736 .
2018-04-12 17:01:38 +08:00
Michael (Xiao Xufeng)
dceb3452c7
doc(spi_master): format the documentation of several fields and macros in spi_master.h
2018-04-12 17:01:37 +08:00
kooho
2236249555
driver(pcnt): Add some APIs to support each unit can have it's own interrupt handler.
2018-04-11 16:15:09 +08:00
Ivan Grokhotkov
ee600784c5
sdmmc: add SDIO support
...
- Add SDIO support at protocol layer (probing, data transfer, interrupts)
- Add SDIO interrupts support in SDMMC host
- Add test (communicate with ESP32 in SDIO download mode)
2018-04-11 11:07:13 +08:00
kooho
ccf09c3b39
driver(gpio): Add api support digital pad hold function.
2018-04-10 11:31:59 +08:00
kooho
305c788c60
driver(uart): Add API to get the position of cmd_char
2018-04-03 12:34:16 +08:00
Ivan Grokhotkov
bbbdec24d9
sdspi: handle error flags for R3/R7 responses
...
Previously error flags were only handled for R1 responses. This change
moves error handling into a separate function and calls it for R1/R3/R7.
2018-03-30 18:49:42 +08:00
Jiang Jiang Jian
8b9f237cb9
Merge branch 'feature/i2s_add_expand_function' into 'master'
...
add a new i2s feature to expand the original i2s width
See merge request idf/esp-idf!1617
2018-03-30 14:51:23 +08:00
kooho
8e1f930582
driver(gpio): Modified the GPIO_CHECK's return value when ISR service already installed
2018-03-29 09:58:31 +08:00
Ivan Grokhotkov
1a157279e0
Merge branch 'doc/adc1_channel_config' into 'master'
...
adc: Add doc details about configure not needed before each read
See merge request idf/esp-idf!2132
2018-03-28 19:11:44 +08:00
Angus Gratton
4507b3fde6
adc: Add doc details about configure not needed before each read
2018-03-28 11:52:41 +11:00
Michael (Xiao Xufeng)
7563510758
feat(spi_master): allow output high speed data when dummy bits are not used.
2018-03-26 21:24:32 +08:00
Zhang Zhao Xiang
f48ecb8613
Add a new i2s feature to expand the original i2s width
2018-03-22 18:52:55 +08:00
Ivan Grokhotkov
7e2028d598
Merge branch 'bugfix/gpio_timer_doc_fixes' into 'master'
...
Minor fixes of GPIO and timer group driver docs
See merge request idf/esp-idf!2081
2018-03-20 10:49:36 +08:00
Jonathan Kaufmann
a99d4d5a7f
Modified spi_bus_add_device so that it takes a constant *dev_config parameter.
...
Merges https://github.com/espressif/esp-idf/pull/1690
2018-03-19 12:17:45 +08:00
Stefan Tauner
38daa1e716
docs: fix description of timer_get_alarm_value()
...
Replace c&p text with an actual description.
Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Stefan Tauner
86a1d579ff
docs: add warning to gpio_get_level()
...
On most microcontrollers I have worked with one can retrieve the
current state of output GPIO pins. On ESP32 this is not the case
if the pad is not explictly configured to route this information into
the port by configuring it as input or i/o.
Thus add a warning to the API documentation of gpio_get_level().
Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Ivan Grokhotkov
c8ba6cf156
Merge branch 'feature/rtc_gpio_isolate' into 'master'
...
Add rtc_gpio_isolate function, use it in deep sleep examples
See merge request idf/esp-idf!1936
2018-02-26 06:09:08 +08:00
Tuan PM
7cda34c626
i2s: add support fixed_mclk configuration
2018-02-22 09:00:23 +07:00
Ivan Grokhotkov
f45622ff17
driver/rtc: add rtc_gpio_isolate helper function to disconnect RTC IO
2018-02-11 13:18:51 +08:00
Ivan Grokhotkov
e381c6adde
Merge branch 'bugfix/fix_i2s_adc_mode' into 'master'
...
driver(i2s): fix broken i2s adc mode
See merge request idf/esp-idf!1653
2018-02-11 12:58:58 +08:00
Jeroen Domburg
35de8d703e
Merge branch 'bugfix/spi_gpio0' into 'master'
...
fix(spi): several fixes about maros (flags) and GPIO0.
See merge request idf/esp-idf!1666
2018-02-07 18:50:13 +08:00
Wangjialin
451f69cc2e
driver(i2s): fix broken i2s adc mode
...
1. Move i2s reset code from i2s_stop to i2s_start.
2. add RTC API to set sw mode for ADC
3. add description for adc_power_always_on()
4. add lock for i2s dma and RTC ADC functions.
5. add ADC read task in example
reported from bbs: https://esp32.com/viewtopic.php?f=13&t=3490&p=17522#p17522
reported from github: https://github.com/espressif/esp-idf/issues/1333
2018-02-07 17:17:20 +08:00
Michael (XIAO Xufeng)
e14e1508cb
fix(sdmmc_host): fix the issue when slot and host flag are not compatible.
2018-02-07 12:05:05 +08:00
Angus Gratton
4297c337f9
esp32: Add IO_MUX_GPIOxx register names to match iomux names used in TRM
...
The TRM describes IOMUX registers are IO_MUX_x_REG for x in GPIO0-39.
Until now ESP-IDF describes them as PERIPHS_IO_MUX_(pinname)_U
This commit adds additional IOMUX register names which match the ones used in the TRM.
2018-01-30 17:09:37 +08:00
michael
be96e1db95
fix(spi): fix typo of LSBFIRST macro.
...
Closes https://github.com/espressif/esp-idf/issues/1480 , Closes https://github.com/espressif/esp-idf/issues/1464
2018-01-29 17:44:37 +08:00
michael
8900200147
fix(spi_master): fix the variable command and address flag issue.
...
Closes https://github.com/espressif/esp-idf/issues/1549
2018-01-29 17:44:36 +08:00
Wangjialin
870efdb9d4
bugfix(uart): patten detect function
...
requirement from github(https://github.com/espressif/esp-idf/issues/805 ): to provide the position in the buffer of the pattern detected.
requirement from AT application: in AT app, when no hardware flow control is enabled, in some situation the rx buffer might be full, and the terminator “+++” might be lost, we can use pattern detect interrupt to avoid missing the terminator. When pattern detect interrupt happens, it will not send a data event at the same time.
1. Add API to get position of detected pattern in rx buffer
2. Modify UART event example
3. Add comments for uart_flush, add alias API uart_flush_input to clear the rx buffer
4. Modify the way rx_buffered_len is calculated
2018-01-22 13:33:51 +08:00
Angus Gratton
2227c44254
rmt: Add void * argument for end-of-transmission callback
...
Ref https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:31:59 +11:00
Krzysztof Bociurko
1066c74b74
rmt: Adds a simple handler that can be called when transmission ends.
...
Merges https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:14:02 +11:00
michael
7a7b8fc182
refactor(spi_master): move the clock calculation from ISR to initialization.
2017-12-28 12:03:28 +08:00
Angus Gratton
ec7cac5fe8
Merge branch 'feature/docs_update_rmt_api' into 'master'
...
RMT API docs update, new example
See merge request !1564
2017-12-27 09:23:47 +08:00
kooho
d78be97154
add NACK for the last byte to read
2017-12-26 21:50:18 +08:00
krzychb
421592a8eb
LEDC Driver: Added back original definitions of 'duty_resolution' and 'clock_divider'. This update is to provide backward compatibility with ESP-IDF 2.1.
2017-12-04 21:12:56 +01:00
Jiang Jiang Jian
c672fc54fd
Merge branch 'feature/ledc_more_meaningful_parameter_names' into 'master'
...
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resoluti…
See merge request !1440
2017-12-01 19:33:53 +08:00
krzychb
866b84b9f8
Typo fix. Closes https://github.com/espressif/esp-idf/issue/1323
2017-12-01 09:06:08 +01:00
kooho
ada33fe3dd
Add GPIO input and output disable option
2017-11-22 15:00:27 +08:00
krzychb
2ec35f60ca
RMT API docs update, new example
2017-11-21 22:34:23 +01:00
Angus Gratton
f54e99008d
spi: Add ESP_ERR_NO_MEM to spi_device_queue_trans() documentation
...
Ref https://github.com/espressif/esp-idf/pull/1243#issuecomment-343103414
2017-11-20 16:06:59 +11:00
Raphael Luba
31711b5ac7
SPI: Document TIMEOUT return values
...
`spi_device_queue_trans` and `spi_device_get_trans_result` can return `ESP_ERR_TIMEOUT` – but this had not been documented.
Merges https://github.com/espressif/esp-idf/pull/1243
2017-11-17 10:50:54 +11:00
krzychb
d488bb7bac
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'
2017-11-15 08:08:12 +01:00
Ivan Grokhotkov
09d2791cfd
Merge branch 'feature/spi_variable_len' into 'master'
...
feat(spi_master): add new feature allow use variable command and address field length for the same device.
See merge request !1322
2017-11-14 00:08:50 +08:00
Anton Maklakov
27c1fc52ba
Added .command_timeout_ms = 0 to SDSPI_HOST_DEFAULT() too
2017-11-08 12:52:50 +08:00
Philip Ashmore
d72bef02e9
Added .command_timeout_ms = 0 to SDMMC_HOST_DEFAULT() in components/driver/include/driver/sdmmc_host.h
2017-11-03 17:15:44 +08:00
XiaXiaotian
42cefc173f
refractor WiFi clock setting
...
Do not set WiFi clock in PHY initializing function, move it to WiFi
start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92
component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
...
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
michael
0330ec270a
feat(spi_master): add new feature allow use variable command and address field length for the same device.
...
Closes #654
2017-10-30 19:33:41 +08:00
Angus Gratton
ffeecde9e2
Merge branch 'feature/docs_update_timer_api' into 'master'
...
Timer API docs update, refactored example
See merge request !1316
2017-10-27 13:31:18 +08:00
krzychb
9b7d5d76a7
Timer API docs update, refactored example
2017-10-27 07:13:59 +02:00
Angus Gratton
f5b3a370cd
Merge branch 'feature/adc2_driver' into 'master'
...
feature(adc2): add support to use ADC2 when WIFI is disabled
See merge request !1237
2017-10-26 15:48:48 +08:00
esp32de
7c0020bfd0
feat(adc2): append adc2 support and api and the lock with WIFI module
...
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Wangjialin
303b9f60db
bugfix(uart): set default tx idle num
...
Reported from:
https://github.com/espressif/esp-idf/issues/703
https://github.com/espressif/esp-idf/issues/917
In uart driver we didn't change the default value of tx idle num, so there would be a delay after tx FIFO is empty.
1. Add API to set tx idle interval before next data transmission. (The UART hardware can add an interval after tx FIFO is empty).
2. Set default tx idle interval to zero.
3. Add hardware disable in uart driver delete function.
2017-10-25 13:29:02 +08:00
michael
a6ac5b33c9
feat(rtc): open adc*(dac)_pad_get_io_num functions to public.
2017-10-24 12:06:14 +08:00
Angus Gratton
01befe4d6a
Merge branch 'bugfix/i2c_hw_fsm_recover' into 'master'
...
bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
See merge request !1272
2017-10-23 10:16:02 +08:00
Ivan Grokhotkov
59b7d98fec
Merge branch 'feature/dfs' into 'master'
...
Dynamic frequency scaling
See merge request !1189
2017-10-22 12:34:11 +08:00
Wangjialin
ed1e32f583
bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
...
Reported from different sources from github or bbs:
https://github.com/espressif/esp-idf/issues/680
https://github.com/espressif/esp-idf/issues/922
We tested reading several sensor or other I2C slave devices, if the power and SDA/SCL wires are in proper condition, everything works find with reading the slave.
If we remove the power supply for the slave during I2C is reading, or directly connect SDA or SCL to ground, this would cause the I2C FSM get stuck in wrong state, all we can do is the reset the I2C hardware in this case.
After this commit, no matter whether the power supply of I2C slave is removed or SDA / SCL are shorted to ground, the driver can recover from wrong state.
We are not sure whether this the save issue with the reported one yet, but to make the driver more robust.
Further information:
1. For I2C master mode, we have tested different situations, e.g., to short the SDA/SCL directly to GND/VCC, to short the SDA to SCL, to un-plug the slave device, to power off the slave device. Under all of those situations, this version of driver can recover and keep working.
2. Some slave device will die by accident and keep the SDA in low level, in this case, master should send several clock to make the slave release the bus.
3. Slave mode of ESP32 might also get in wrong state that held the SDA low, in this case, master device could send a stop signal to make esp32 slave release the bus.
Modifications:
1. Disable I2C_MASTER_TRAN_COMP interrupt to void extra interrupt.
2. Disable un-used timeout interrupt for slave.
3. Add bus reset if error detected for master mode.
4. Add bus clear if SDA level is low when error detected.
5. Modify the argument type of i2c_set_pin.
6. add API to set timeout value
7. add parameter check for timing APIs
2017-10-21 02:10:59 +08:00
Ivan Grokhotkov
b6f37bda97
Merge branch 'feature/i2s_built_in_adc' into 'master'
...
feature(I2S-ADC): add ADC mode for I2S.
See merge request !1077
2017-10-20 15:52:56 +08:00
Angus Gratton
477ed8ce62
Merge branch 'bugfix/touchpad_dac_mismatch_on_tp8_tp9' into 'master'
...
bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9.
See merge request !1288
2017-10-20 14:18:32 +08:00
Ivan Grokhotkov
fba9678c56
uart: add support for REF_TICK
2017-10-18 14:19:20 +08:00
michael
8e31a36562
feat(spi_slave): append trans_len field in trans_desc to show length actually transferred.
2017-10-17 12:01:12 +08:00
Ivan Grokhotkov
edb212986f
Merge branch 'bugfix/sd_card_fixes' into 'master'
...
SD card fixes
See merge request !1393
2017-10-17 04:45:24 +08:00
Angus Gratton
0a52dbccca
Merge branch 'bugfix/spi_reset_race' into 'master'
...
periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround
See merge request !1349
2017-10-13 08:51:36 +08:00
Ivan Grokhotkov
3cf23ff77d
sdmmc: allow command timeouts to be configured
...
Previously the timeout was set to the same value (1000ms) for all kinds
of commands. In some cases, such as with slow cards, write commands
failed to complete in time.
This change makes command timeouts configurable via sdmmc_host_t
structure, and also makes default timeouts different for ordinary
commands and write commands.
Closes https://github.com/espressif/esp-idf/issues/1093
Ref TW15774.
2017-10-13 08:16:07 +08:00
Jiang Jiang Jian
8e47c355fa
Merge branch 'feature/i2s_apll' into 'master'
...
driver/i2s: add support apll clock
See merge request !1115
2017-10-12 19:06:50 +08:00
Jiang Jiang Jian
da247c2cf8
Merge branch 'bugfix/ledc_duty_type_change' into 'master'
...
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t
See merge request !752
2017-10-12 18:18:33 +08:00
Jeroen Domburg
a8131b14b0
Merge branch 'feature/docs_update_uart_api' into 'master'
...
Updated functional overview of UART API documentation
See merge request !1328
2017-10-10 14:06:08 +08:00
krzychb
9107b47deb
Updated UART API documentation and examples. Included a fix of #1091 from GitHub
2017-10-10 05:54:36 +02:00