driver(ledc): fix duty and fade issues and add thread-safe version APIs.
1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914 2. Fix the duty overflow issue when duty_scale is set to 1. 3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit. 4. Add thread-safe version APIs to set duty and fade. 5. Correct the duty range in driver.
This commit is contained in:
kooho
Wangjialin
parent
feb64c3be6
commit
1bebec05c6
|
|
@ -27,6 +27,7 @@ extern "C" {
|
|||
#define LEDC_APB_CLK_HZ (APB_CLK_FREQ)
|
||||
#define LEDC_REF_CLK_HZ (1*1000000)
|
||||
#define LEDC_ERR_DUTY (0xFFFFFFFF)
|
||||
#define LEDC_ERR_VAL (-1)
|
||||
|
||||
typedef enum {
|
||||
LEDC_HIGH_SPEED_MODE = 0, /*!< LEDC high speed speed_mode */
|
||||
|
|
@ -42,6 +43,7 @@ typedef enum {
|
|||
typedef enum {
|
||||
LEDC_DUTY_DIR_DECREASE = 0, /*!< LEDC duty decrease direction */
|
||||
LEDC_DUTY_DIR_INCREASE = 1, /*!< LEDC duty increase direction */
|
||||
LEDC_DUTY_DIR_MAX,
|
||||
} ledc_duty_direction_t;
|
||||
|
||||
typedef enum {
|
||||
|
|
@ -54,6 +56,7 @@ typedef enum {
|
|||
LEDC_TIMER_1, /*!< LEDC timer 1 */
|
||||
LEDC_TIMER_2, /*!< LEDC timer 2 */
|
||||
LEDC_TIMER_3, /*!< LEDC timer 3 */
|
||||
LEDC_TIMER_MAX,
|
||||
} ledc_timer_t;
|
||||
|
||||
typedef enum {
|
||||
|
|
@ -69,12 +72,27 @@ typedef enum {
|
|||
} ledc_channel_t;
|
||||
|
||||
typedef enum {
|
||||
LEDC_TIMER_10_BIT = 10, /*!< LEDC PWM duty resolution of 10 bits */
|
||||
LEDC_TIMER_11_BIT = 11, /*!< LEDC PWM duty resolution of 11 bits */
|
||||
LEDC_TIMER_12_BIT = 12, /*!< LEDC PWM duty resolution of 12 bits */
|
||||
LEDC_TIMER_13_BIT = 13, /*!< LEDC PWM duty resolution of 13 bits */
|
||||
LEDC_TIMER_14_BIT = 14, /*!< LEDC PWM duty resolution of 14 bits */
|
||||
LEDC_TIMER_15_BIT = 15, /*!< LEDC PWM duty resolution of 15 bits */
|
||||
LEDC_TIMER_1_BIT = 1, /*!< LEDC PWM duty resolution of 1 bits */
|
||||
LEDC_TIMER_2_BIT, /*!< LEDC PWM duty resolution of 2 bits */
|
||||
LEDC_TIMER_3_BIT, /*!< LEDC PWM duty resolution of 3 bits */
|
||||
LEDC_TIMER_4_BIT, /*!< LEDC PWM duty resolution of 4 bits */
|
||||
LEDC_TIMER_5_BIT, /*!< LEDC PWM duty resolution of 5 bits */
|
||||
LEDC_TIMER_6_BIT, /*!< LEDC PWM duty resolution of 6 bits */
|
||||
LEDC_TIMER_7_BIT, /*!< LEDC PWM duty resolution of 7 bits */
|
||||
LEDC_TIMER_8_BIT, /*!< LEDC PWM duty resolution of 8 bits */
|
||||
LEDC_TIMER_9_BIT, /*!< LEDC PWM duty resolution of 9 bits */
|
||||
LEDC_TIMER_10_BIT, /*!< LEDC PWM duty resolution of 10 bits */
|
||||
LEDC_TIMER_11_BIT, /*!< LEDC PWM duty resolution of 11 bits */
|
||||
LEDC_TIMER_12_BIT, /*!< LEDC PWM duty resolution of 12 bits */
|
||||
LEDC_TIMER_13_BIT, /*!< LEDC PWM duty resolution of 13 bits */
|
||||
LEDC_TIMER_14_BIT, /*!< LEDC PWM duty resolution of 14 bits */
|
||||
LEDC_TIMER_15_BIT, /*!< LEDC PWM duty resolution of 15 bits */
|
||||
LEDC_TIMER_16_BIT, /*!< LEDC PWM duty resolution of 16 bits */
|
||||
LEDC_TIMER_17_BIT, /*!< LEDC PWM duty resolution of 17 bits */
|
||||
LEDC_TIMER_18_BIT, /*!< LEDC PWM duty resolution of 18 bits */
|
||||
LEDC_TIMER_19_BIT, /*!< LEDC PWM duty resolution of 19 bits */
|
||||
LEDC_TIMER_20_BIT, /*!< LEDC PWM duty resolution of 20 bits */
|
||||
LEDC_TIMER_BIT_MAX,
|
||||
} ledc_timer_bit_t;
|
||||
|
||||
typedef enum {
|
||||
|
|
@ -92,7 +110,8 @@ typedef struct {
|
|||
ledc_channel_t channel; /*!< LEDC channel (0 - 7) */
|
||||
ledc_intr_type_t intr_type; /*!< configure interrupt, Fade interrupt enable or Fade interrupt disable */
|
||||
ledc_timer_t timer_sel; /*!< Select the timer source of channel (0 - 3) */
|
||||
uint32_t duty; /*!< LEDC channel duty, the range of duty setting is [0, (2**duty_resolution) - 1] */
|
||||
uint32_t duty; /*!< LEDC channel duty, the range of duty setting is [0, (2**duty_resolution)] */
|
||||
int hpoint; /*!< LEDC channel hpoint value, the max value is 0xfffff */
|
||||
} ledc_channel_config_t;
|
||||
|
||||
/**
|
||||
|
|
@ -137,9 +156,11 @@ esp_err_t ledc_timer_config(const ledc_timer_config_t* timer_conf);
|
|||
|
||||
/**
|
||||
* @brief LEDC update channel parameters
|
||||
* Call this function to activate the LEDC updated parameters.
|
||||
* After ledc_set_duty, ledc_set_fade, we need to call this function to update the settings.
|
||||
*
|
||||
* @note Call this function to activate the LEDC updated parameters.
|
||||
* After ledc_set_duty, we need to call this function to update the settings.
|
||||
* @note ledc_set_duty, ledc_set_duty_with_hpoint and ledc_update_duty are not thread-safe, do not call these functions to
|
||||
* control one LEDC channel in different tasks at the same time.
|
||||
* A thread-safe version of API is ledc_set_duty_and_update
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode,
|
||||
* @param channel LEDC channel (0-7), select from ledc_channel_t
|
||||
*
|
||||
|
|
@ -191,12 +212,47 @@ esp_err_t ledc_set_freq(ledc_mode_t speed_mode, ledc_timer_t timer_num, uint32_t
|
|||
uint32_t ledc_get_freq(ledc_mode_t speed_mode, ledc_timer_t timer_num);
|
||||
|
||||
/**
|
||||
* @brief LEDC set duty
|
||||
* @brief LEDC set duty and hpoint value
|
||||
* Only after calling ledc_update_duty will the duty update.
|
||||
* @note ledc_set_duty, ledc_set_duty_with_hpoint and ledc_update_duty are not thread-safe, do not call these functions to
|
||||
* control one LEDC channel in different tasks at the same time.
|
||||
* A thread-safe version of API is ledc_set_duty_and_update
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param channel LEDC channel (0-7), select from ledc_channel_t
|
||||
* @param duty Set the LEDC duty, the range of duty setting is [0, (2**duty_resolution)]
|
||||
* @param hpoint Set the LEDC hpoint value(max: 0xfffff)
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK Success
|
||||
* - ESP_ERR_INVALID_ARG Parameter error
|
||||
*/
|
||||
esp_err_t ledc_set_duty_with_hpoint(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, uint32_t hpoint);
|
||||
|
||||
/**
|
||||
* @brief LEDC get hpoint value, the counter value when the output is set high level.
|
||||
*
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param channel LEDC channel (0-7), select from ledc_channel_t
|
||||
* @param duty Set the LEDC duty, the range of duty setting is [0, (2**duty_resolution) - 1]
|
||||
* @return
|
||||
* - LEDC_ERR_VAL if parameter error
|
||||
* - Others Current hpoint value of LEDC channel
|
||||
*/
|
||||
int ledc_get_hpoint(ledc_mode_t speed_mode, ledc_channel_t channel);
|
||||
|
||||
/**
|
||||
* @brief LEDC set duty
|
||||
* This function do not change the hpoint value of this channel. if needed, please call ledc_set_duty_with_hpoint.
|
||||
* only after calling ledc_update_duty will the duty update.
|
||||
* @note ledc_set_duty, ledc_set_duty_with_hpoint and ledc_update_duty are not thread-safe, do not call these functions to
|
||||
* control one LEDC channel in different tasks at the same time.
|
||||
* A thread-safe version of API is ledc_set_duty_and_update.
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param channel LEDC channel (0-7), select from ledc_channel_t
|
||||
* @param duty Set the LEDC duty, the range of duty setting is [0, (2**duty_resolution)]
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK Success
|
||||
|
|
@ -219,20 +275,21 @@ uint32_t ledc_get_duty(ledc_mode_t speed_mode, ledc_channel_t channel);
|
|||
/**
|
||||
* @brief LEDC set gradient
|
||||
* Set LEDC gradient, After the function calls the ledc_update_duty function, the function can take effect.
|
||||
*
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param channel LEDC channel (0-7), select from ledc_channel_t
|
||||
* @param duty Set the start of the gradient duty, the range of duty setting is [0, (2**duty_resolution) - 1]
|
||||
* @param gradule_direction Set the direction of the gradient
|
||||
* @param step_num Set the number of the gradient
|
||||
* @param duty_cyle_num Set how many LEDC tick each time the gradient lasts
|
||||
* @param duty_scale Set gradient change amplitude
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param channel LEDC channel (0-7), select from ledc_channel_t
|
||||
* @param duty Set the start of the gradient duty, the range of duty setting is [0, (2**duty_resolution)]
|
||||
* @param fade_direction Set the direction of the gradient
|
||||
* @param step_num Set the number of the gradient
|
||||
* @param duty_cyle_num Set how many LEDC tick each time the gradient lasts
|
||||
* @param duty_scale Set gradient change amplitude
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK Success
|
||||
* - ESP_ERR_INVALID_ARG Parameter error
|
||||
*/
|
||||
esp_err_t ledc_set_fade(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, ledc_duty_direction_t gradule_direction,
|
||||
esp_err_t ledc_set_fade(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, ledc_duty_direction_t fade_direction,
|
||||
uint32_t step_num, uint32_t duty_cyle_num, uint32_t duty_scale);
|
||||
|
||||
/**
|
||||
|
|
@ -259,7 +316,7 @@ esp_err_t ledc_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags,
|
|||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param timer_sel Timer index (0-3), there are 4 timers in LEDC module
|
||||
* @param clock_divider Timer clock divide value, the timer clock is divided from the selected clock source
|
||||
* @param duty_resolution Resolution of duty setting in number of bits. The range of duty values is [0, (2**duty_resolution) - 1]
|
||||
* @param duty_resolution Resolution of duty setting in number of bits. The range of duty values is [0, (2**duty_resolution)]
|
||||
* @param clk_src Select LEDC source clock.
|
||||
*
|
||||
* @return
|
||||
|
|
@ -319,9 +376,14 @@ esp_err_t ledc_timer_resume(ledc_mode_t speed_mode, uint32_t timer_sel);
|
|||
esp_err_t ledc_bind_channel_timer(ledc_mode_t speed_mode, uint32_t channel, uint32_t timer_idx);
|
||||
|
||||
/**
|
||||
* @brief Set LEDC fade function. Should call ledc_fade_func_install() before calling this function.
|
||||
* @brief Set LEDC fade function.
|
||||
* @note Call ledc_fade_func_install() once before calling this function.
|
||||
* Call ledc_fade_start() after this to start fading.
|
||||
*
|
||||
* @note ledc_set_fade_with_step, ledc_set_fade_with_time and ledc_fade_start are not thread-safe, do not call these functions to
|
||||
* control one LEDC channel in different tasks at the same time.
|
||||
* A thread-safe version of API is ledc_set_fade_step_and_start
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode,
|
||||
* @param channel LEDC channel index (0-7), select from ledc_channel_t
|
||||
* @param target_duty Target duty of fading [0, (2**duty_resolution) - 1]
|
||||
|
|
@ -334,12 +396,17 @@ esp_err_t ledc_bind_channel_timer(ledc_mode_t speed_mode, uint32_t channel, uint
|
|||
* - ESP_ERR_INVALID_STATE Fade function not installed.
|
||||
* - ESP_FAIL Fade function init error
|
||||
*/
|
||||
esp_err_t ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int scale, int cycle_num);
|
||||
esp_err_t ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t scale, uint32_t cycle_num);
|
||||
|
||||
/**
|
||||
* @brief Set LEDC fade function, with a limited time. Should call ledc_fade_func_install() before calling this function.
|
||||
* @brief Set LEDC fade function, with a limited time.
|
||||
* @note Call ledc_fade_func_install() once before calling this function.
|
||||
* Call ledc_fade_start() after this to start fading.
|
||||
*
|
||||
* @note ledc_set_fade_with_step, ledc_set_fade_with_time and ledc_fade_start are not thread-safe, do not call these functions to
|
||||
* control one LEDC channel in different tasks at the same time.
|
||||
* A thread-safe version of API is ledc_set_fade_step_and_start
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode,
|
||||
* @param channel LEDC channel index (0-7), select from ledc_channel_t
|
||||
* @param target_duty Target duty of fading.( 0 - (2 ** duty_resolution - 1)))
|
||||
|
|
@ -354,8 +421,7 @@ esp_err_t ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel
|
|||
esp_err_t ledc_set_fade_with_time(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int max_fade_time_ms);
|
||||
|
||||
/**
|
||||
* @brief Install ledc fade function. This function will occupy interrupt of LEDC module.
|
||||
*
|
||||
* @brief Install LEDC fade function. This function will occupy interrupt of LEDC module.
|
||||
* @param intr_alloc_flags Flags used to allocate the interrupt. One or multiple (ORred)
|
||||
* ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info.
|
||||
*
|
||||
|
|
@ -373,18 +439,70 @@ void ledc_fade_func_uninstall();
|
|||
|
||||
/**
|
||||
* @brief Start LEDC fading.
|
||||
*
|
||||
* @note Call ledc_fade_func_install() once before calling this function.
|
||||
* Call this API right after ledc_set_fade_with_time or ledc_set_fade_with_step before to start fading.
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param channel LEDC channel number
|
||||
* @param wait_done Whether to block until fading done.
|
||||
* @param fade_mode Whether to block until fading done.
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK Success
|
||||
* - ESP_ERR_INVALID_STATE Fade function not installed.
|
||||
* - ESP_ERR_INVALID_ARG Parameter error.
|
||||
*/
|
||||
esp_err_t ledc_fade_start(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_fade_mode_t wait_done);
|
||||
esp_err_t ledc_fade_start(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_fade_mode_t fade_mode);
|
||||
|
||||
/**
|
||||
* @brief A thread-safe API to set duty for LEDC channel and update the settings immediately
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
*
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode
|
||||
* @param channel LEDC channel (0-7), select from ledc_channel_t
|
||||
* @param duty Set the LEDC duty, the range of duty setting is [0, (2**duty_resolution)]
|
||||
* @param hpoint Set the LEDC hpoint value(max: 0xfffff)
|
||||
*
|
||||
*/
|
||||
esp_err_t ledc_set_duty_and_update(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, uint32_t hpoint);
|
||||
|
||||
/**
|
||||
* @brief A thread-safe API to set and start LEDC fade function, with a limited time.
|
||||
* @note Call ledc_fade_func_install() once, before calling this function.
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode,
|
||||
* @param channel LEDC channel index (0-7), select from ledc_channel_t
|
||||
* @param target_duty Target duty of fading.( 0 - (2 ** duty_resolution - 1)))
|
||||
* @param max_fade_time_ms The maximum time of the fading ( ms ).
|
||||
* @param fade_mode choose blocking or non-blocking mode
|
||||
* @return
|
||||
* - ESP_ERR_INVALID_ARG Parameter error
|
||||
* - ESP_OK Success
|
||||
* - ESP_ERR_INVALID_STATE Fade function not installed.
|
||||
* - ESP_FAIL Fade function init error
|
||||
*/
|
||||
esp_err_t ledc_set_fade_time_and_start(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t max_fade_time_ms, ledc_fade_mode_t fade_mode);
|
||||
|
||||
/**
|
||||
* @brief A thread-safe API to set and start LEDC fade function.
|
||||
* @note Call ledc_fade_func_install() once before calling this function.
|
||||
* @note If a fade operation is running in progress on that channel, the driver would not allow it to be stopped.
|
||||
* Other duty operations will have to wait until the fade operation has finished.
|
||||
* @param speed_mode Select the LEDC speed_mode, high-speed mode and low-speed mode,
|
||||
* @param channel LEDC channel index (0-7), select from ledc_channel_t
|
||||
* @param target_duty Target duty of fading [0, (2**duty_resolution) - 1]
|
||||
* @param scale Controls the increase or decrease step scale.
|
||||
* @param cycle_num increase or decrease the duty every cycle_num cycles
|
||||
* @param fade_mode choose blocking or non-blocking mode
|
||||
* @return
|
||||
* - ESP_ERR_INVALID_ARG Parameter error
|
||||
* - ESP_OK Success
|
||||
* - ESP_ERR_INVALID_STATE Fade function not installed.
|
||||
* - ESP_FAIL Fade function init error
|
||||
*/
|
||||
esp_err_t ledc_set_fade_step_and_start(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t scale, uint32_t cycle_num, ledc_fade_mode_t fade_mode);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -51,12 +51,14 @@ typedef struct {
|
|||
static ledc_fade_t *s_ledc_fade_rec[LEDC_SPEED_MODE_MAX][LEDC_CHANNEL_MAX];
|
||||
static ledc_isr_handle_t s_ledc_fade_isr_handle = NULL;
|
||||
|
||||
#define LEDC_VAL_NO_CHANGE (-1)
|
||||
#define LEDC_STEP_NUM_MAX (1023)
|
||||
#define LEDC_DUTY_DECIMAL_BIT_NUM (4)
|
||||
|
||||
#define LEDC_VAL_NO_CHANGE (-1)
|
||||
#define LEDC_STEP_NUM_MAX (1023)
|
||||
#define LEDC_DUTY_DECIMAL_BIT_NUM (4)
|
||||
#define LEDC_HPOINT_VAL_MAX (LEDC_HPOINT_HSCH1_V)
|
||||
#define LEDC_FADE_TOO_SLOW_STR "LEDC FADE TOO SLOW"
|
||||
#define LEDC_FADE_TOO_FAST_STR "LEDC FADE TOO FAST"
|
||||
static const char *LEDC_FADE_SERVICE_ERR_STR = "LEDC fade service not installed";
|
||||
static const char *LEDC_FADE_INIT_ERROR_STR = "LEDC fade channel init error";
|
||||
static const char *LEDC_FADE_INIT_ERROR_STR = "LEDC fade channel init error, not enough memory or service not installed";
|
||||
|
||||
static void ledc_ls_timer_update(ledc_mode_t speed_mode, ledc_timer_t timer_sel)
|
||||
{
|
||||
|
|
@ -72,82 +74,6 @@ static IRAM_ATTR void ledc_ls_channel_update(ledc_mode_t speed_mode, ledc_channe
|
|||
}
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_set(ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t clock_divider, uint32_t duty_resolution,
|
||||
ledc_clk_src_t clk_src)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel <= LEDC_TIMER_3, "timer_sel")
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.clock_divider = clock_divider;
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.tick_sel = clk_src;
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution = duty_resolution;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
static IRAM_ATTR esp_err_t ledc_duty_config(ledc_mode_t speed_mode, ledc_channel_t channel_num, int hpoint_val, uint32_t duty_val,
|
||||
uint32_t duty_direction, uint32_t duty_num, uint32_t duty_cycle, uint32_t duty_scale)
|
||||
{
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
if (hpoint_val >= 0) {
|
||||
LEDC.channel_group[speed_mode].channel[channel_num].hpoint.hpoint = hpoint_val;
|
||||
}
|
||||
LEDC.channel_group[speed_mode].channel[channel_num].duty.duty = duty_val;
|
||||
LEDC.channel_group[speed_mode].channel[channel_num].conf1.val = ((duty_direction & LEDC_DUTY_INC_HSCH0_V) << LEDC_DUTY_INC_HSCH0_S) |
|
||||
((duty_num & LEDC_DUTY_NUM_HSCH0_V) << LEDC_DUTY_NUM_HSCH0_S) |
|
||||
((duty_cycle & LEDC_DUTY_CYCLE_HSCH0_V) << LEDC_DUTY_CYCLE_HSCH0_S) |
|
||||
((duty_scale & LEDC_DUTY_SCALE_HSCH0_V) << LEDC_DUTY_SCALE_HSCH0_S);
|
||||
ledc_ls_channel_update(speed_mode, channel_num);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_bind_channel_timer(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t timer_idx)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_idx <= LEDC_TIMER_3, "timer_idx");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel = timer_idx;
|
||||
ledc_ls_channel_update(speed_mode, channel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_rst(ledc_mode_t speed_mode, uint32_t timer_sel)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel <= LEDC_TIMER_3, "timer_sel");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 1;
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 0;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_pause(ledc_mode_t speed_mode, uint32_t timer_sel)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel <= LEDC_TIMER_3, "timer_sel");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 1;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_resume(ledc_mode_t speed_mode, uint32_t timer_sel)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel <= LEDC_TIMER_3, "timer_sel");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 0;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
static esp_err_t ledc_enable_intr_type(ledc_mode_t speed_mode, uint32_t channel, ledc_intr_type_t type)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
|
|
@ -168,6 +94,124 @@ static esp_err_t ledc_enable_intr_type(ledc_mode_t speed_mode, uint32_t channel,
|
|||
return ESP_OK;
|
||||
}
|
||||
|
||||
static void _ledc_fade_hw_acquire(ledc_mode_t mode, ledc_channel_t channel)
|
||||
{
|
||||
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
|
||||
if (fade) {
|
||||
xSemaphoreTake(fade->ledc_fade_sem, portMAX_DELAY);
|
||||
ledc_enable_intr_type(mode, channel, LEDC_INTR_DISABLE);
|
||||
}
|
||||
}
|
||||
|
||||
static void _ledc_fade_hw_release(ledc_mode_t mode, ledc_channel_t channel)
|
||||
{
|
||||
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
|
||||
if (fade) {
|
||||
xSemaphoreGive(fade->ledc_fade_sem);
|
||||
}
|
||||
}
|
||||
|
||||
static void _ledc_op_lock_acquire(ledc_mode_t mode, ledc_channel_t channel)
|
||||
{
|
||||
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
|
||||
if (fade) {
|
||||
xSemaphoreTake(fade->ledc_fade_mux, portMAX_DELAY);
|
||||
}
|
||||
}
|
||||
|
||||
static void _ledc_op_lock_release(ledc_mode_t mode, ledc_channel_t channel)
|
||||
{
|
||||
ledc_fade_t* fade = s_ledc_fade_rec[mode][channel];
|
||||
if (fade) {
|
||||
xSemaphoreGive(fade->ledc_fade_mux);
|
||||
}
|
||||
}
|
||||
|
||||
static int ledc_get_max_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
|
||||
{
|
||||
// The arguments are checked before internally calling this function.
|
||||
int timer_sel = LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel;
|
||||
int max_duty = (1 << (LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution));
|
||||
return max_duty;
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_set(ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t clock_divider, uint32_t duty_resolution,
|
||||
ledc_clk_src_t clk_src)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.clock_divider = clock_divider;
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.tick_sel = clk_src;
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution = duty_resolution;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
static IRAM_ATTR esp_err_t ledc_duty_config(ledc_mode_t speed_mode, ledc_channel_t channel_num, int hpoint_val, int duty_val,
|
||||
uint32_t duty_direction, uint32_t duty_num, uint32_t duty_cycle, uint32_t duty_scale)
|
||||
{
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
if (hpoint_val >= 0) {
|
||||
LEDC.channel_group[speed_mode].channel[channel_num].hpoint.hpoint = hpoint_val & LEDC_HPOINT_HSCH1_V;
|
||||
}
|
||||
if (duty_val >= 0) {
|
||||
LEDC.channel_group[speed_mode].channel[channel_num].duty.duty = duty_val;
|
||||
}
|
||||
LEDC.channel_group[speed_mode].channel[channel_num].conf1.val = ((duty_direction & LEDC_DUTY_INC_HSCH0_V) << LEDC_DUTY_INC_HSCH0_S) |
|
||||
((duty_num & LEDC_DUTY_NUM_HSCH0_V) << LEDC_DUTY_NUM_HSCH0_S) |
|
||||
((duty_cycle & LEDC_DUTY_CYCLE_HSCH0_V) << LEDC_DUTY_CYCLE_HSCH0_S) |
|
||||
((duty_scale & LEDC_DUTY_SCALE_HSCH0_V) << LEDC_DUTY_SCALE_HSCH0_S);
|
||||
ledc_ls_channel_update(speed_mode, channel_num);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_bind_channel_timer(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t timer_idx)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_idx < LEDC_TIMER_MAX, "timer_select"); portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel = timer_idx;
|
||||
ledc_ls_channel_update(speed_mode, channel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_rst(ledc_mode_t speed_mode, uint32_t timer_sel)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 1;
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 0;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_pause(ledc_mode_t speed_mode, uint32_t timer_sel)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 1;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_timer_resume(ledc_mode_t speed_mode, uint32_t timer_sel)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(timer_sel < LEDC_TIMER_MAX, "timer_select");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 0;
|
||||
ledc_ls_timer_update(speed_mode, timer_sel);
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags, ledc_isr_handle_t *handle)
|
||||
{
|
||||
esp_err_t ret;
|
||||
|
|
@ -180,13 +224,14 @@ esp_err_t ledc_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags,
|
|||
|
||||
esp_err_t ledc_timer_config(const ledc_timer_config_t* timer_conf)
|
||||
{
|
||||
int freq_hz = timer_conf->freq_hz;
|
||||
int duty_resolution = timer_conf->duty_resolution;
|
||||
int timer_num = timer_conf->timer_num;
|
||||
int speed_mode = timer_conf->speed_mode;
|
||||
LEDC_ARG_CHECK(timer_conf != NULL, "timer_conf");
|
||||
uint32_t freq_hz = timer_conf->freq_hz;
|
||||
uint32_t duty_resolution = timer_conf->duty_resolution;
|
||||
uint32_t timer_num = timer_conf->timer_num;
|
||||
uint32_t speed_mode = timer_conf->speed_mode;
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
periph_module_enable(PERIPH_LEDC_MODULE);
|
||||
if (freq_hz == 0 || duty_resolution == 0 || duty_resolution > LEDC_TIMER_15_BIT) {
|
||||
if (freq_hz == 0 || duty_resolution == 0 || duty_resolution >= LEDC_TIMER_BIT_MAX) {
|
||||
ESP_LOGE(LEDC_TAG, "freq_hz=%u duty_resolution=%u", freq_hz, duty_resolution);
|
||||
return ESP_ERR_INVALID_ARG;
|
||||
}
|
||||
|
|
@ -230,7 +275,7 @@ esp_err_t ledc_timer_config(const ledc_timer_config_t* timer_conf)
|
|||
|
||||
esp_err_t ledc_set_pin(int gpio_num, ledc_mode_t speed_mode, ledc_channel_t ledc_channel)
|
||||
{
|
||||
LEDC_ARG_CHECK(ledc_channel <= LEDC_CHANNEL_7, "ledc_channel");
|
||||
LEDC_ARG_CHECK(ledc_channel < LEDC_CHANNEL_MAX, "ledc_channel");
|
||||
LEDC_ARG_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "gpio_num");
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], PIN_FUNC_GPIO);
|
||||
|
|
@ -245,22 +290,24 @@ esp_err_t ledc_set_pin(int gpio_num, ledc_mode_t speed_mode, ledc_channel_t ledc
|
|||
|
||||
esp_err_t ledc_channel_config(const ledc_channel_config_t* ledc_conf)
|
||||
{
|
||||
LEDC_ARG_CHECK(ledc_conf, "ledc_conf");
|
||||
uint32_t speed_mode = ledc_conf->speed_mode;
|
||||
uint32_t gpio_num = ledc_conf->gpio_num;
|
||||
uint32_t ledc_channel = ledc_conf->channel;
|
||||
uint32_t timer_select = ledc_conf->timer_sel;
|
||||
uint32_t intr_type = ledc_conf->intr_type;
|
||||
uint32_t duty = ledc_conf->duty;
|
||||
LEDC_ARG_CHECK(ledc_channel <= LEDC_CHANNEL_7, "ledc_channel");
|
||||
uint32_t hpoint = ledc_conf->hpoint;
|
||||
LEDC_ARG_CHECK(ledc_channel < LEDC_CHANNEL_MAX, "ledc_channel");
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "gpio_num");
|
||||
LEDC_ARG_CHECK(timer_select <= LEDC_TIMER_3, "timer_select");
|
||||
LEDC_ARG_CHECK(timer_select < LEDC_TIMER_MAX, "timer_select");
|
||||
periph_module_enable(PERIPH_LEDC_MODULE);
|
||||
esp_err_t ret = ESP_OK;
|
||||
/*set channel parameters*/
|
||||
/* channel parameters decide how the waveform looks like in one period*/
|
||||
/* set channel duty, duty range is (0 ~ ((2 ** duty_resolution) - 1))*/
|
||||
ledc_set_duty(speed_mode, ledc_channel, duty);
|
||||
/* set channel duty and hpoint value, duty range is (0 ~ ((2 ** duty_resolution) - 1)), max hpoint value is 0xfffff*/
|
||||
ledc_set_duty_with_hpoint(speed_mode, ledc_channel, duty, hpoint);
|
||||
/*update duty settings*/
|
||||
ledc_update_duty(speed_mode, ledc_channel);
|
||||
/*bind the channel with the timer*/
|
||||
|
|
@ -284,7 +331,7 @@ esp_err_t ledc_channel_config(const ledc_channel_config_t* ledc_conf)
|
|||
esp_err_t ledc_update_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel <= LEDC_CHANNEL_7, "channel");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.channel_group[speed_mode].channel[channel].conf0.sig_out_en = 1;
|
||||
LEDC.channel_group[speed_mode].channel[channel].conf1.duty_start = 1;
|
||||
|
|
@ -296,7 +343,7 @@ esp_err_t ledc_update_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
|
|||
esp_err_t ledc_stop(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t idle_level)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel <= LEDC_CHANNEL_7, "channel");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
LEDC.channel_group[speed_mode].channel[channel].conf0.idle_lv = idle_level & 0x1;
|
||||
LEDC.channel_group[speed_mode].channel[channel].conf0.sig_out_en = 0;
|
||||
|
|
@ -310,42 +357,61 @@ esp_err_t ledc_set_fade(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t
|
|||
uint32_t step_num, uint32_t duty_cyle_num, uint32_t duty_scale)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel <= LEDC_CHANNEL_7, "channel");
|
||||
LEDC_ARG_CHECK(fade_direction <= LEDC_DUTY_DIR_INCREASE, "fade_direction");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_ARG_CHECK(fade_direction < LEDC_DUTY_DIR_MAX, "fade_direction");
|
||||
LEDC_ARG_CHECK(step_num <= LEDC_DUTY_NUM_HSCH0_V, "step_num");
|
||||
LEDC_ARG_CHECK(duty_cyle_num <= LEDC_DUTY_CYCLE_HSCH0_V, "duty_cycle_num");
|
||||
LEDC_ARG_CHECK(duty_scale <= LEDC_DUTY_SCALE_HSCH0_V, "duty_scale");
|
||||
if (s_ledc_fade_rec[speed_mode][channel]) {
|
||||
ledc_enable_intr_type(speed_mode, channel, LEDC_INTR_DISABLE);
|
||||
}
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
ledc_duty_config(speed_mode,
|
||||
channel, //uint32_t chan_num,
|
||||
0, //uint32_t hpoint_val,
|
||||
LEDC_VAL_NO_CHANGE,
|
||||
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
|
||||
fade_direction, //uint32_t increase,
|
||||
step_num, //uint32_t duty_num,
|
||||
duty_cyle_num, //uint32_t duty_cycle,
|
||||
duty_scale //uint32_t duty_scale
|
||||
);
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_duty(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty)
|
||||
esp_err_t ledc_set_duty_with_hpoint(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, uint32_t hpoint)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel <= LEDC_CHANNEL_7, "channel");
|
||||
if (s_ledc_fade_rec[speed_mode][channel]) {
|
||||
ledc_enable_intr_type(speed_mode, channel, LEDC_INTR_DISABLE);
|
||||
}
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_ARG_CHECK(hpoint <= LEDC_HPOINT_VAL_MAX, "hpoint");
|
||||
/* The channel configuration should not be changed before the fade operation is done. */
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
ledc_duty_config(speed_mode,
|
||||
channel, //uint32_t chan_num,
|
||||
0, //uint32_t hpoint_val,
|
||||
hpoint, //uint32_t hpoint_val,
|
||||
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
|
||||
1, //uint32_t increase,
|
||||
1, //uint32_t duty_num,
|
||||
1, //uint32_t duty_cycle,
|
||||
0 //uint32_t duty_scale
|
||||
);
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_duty(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
/* The channel configuration should not be changed before the fade operation is done. */
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
ledc_duty_config(speed_mode,
|
||||
channel, //uint32_t chan_num,
|
||||
LEDC_VAL_NO_CHANGE,
|
||||
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
|
||||
1, //uint32_t increase,
|
||||
1, //uint32_t duty_num,
|
||||
1, //uint32_t duty_cycle,
|
||||
0 //uint32_t duty_scale
|
||||
);
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
|
|
@ -356,6 +422,14 @@ uint32_t ledc_get_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
|
|||
return duty;
|
||||
}
|
||||
|
||||
int ledc_get_hpoint(ledc_mode_t speed_mode, ledc_channel_t channel)
|
||||
{
|
||||
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode argument is invalid", LEDC_ERR_VAL);
|
||||
LEDC_CHECK(channel < LEDC_CHANNEL_MAX, "channel argument is invalid", LEDC_ERR_VAL);
|
||||
uint32_t hpoint = LEDC.channel_group[speed_mode].channel[channel].hpoint.hpoint;
|
||||
return hpoint;
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_freq(ledc_mode_t speed_mode, ledc_timer_t timer_num, uint32_t freq_hz)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
|
|
@ -417,17 +491,16 @@ void IRAM_ATTR ledc_fade_isr(void* arg)
|
|||
}
|
||||
uint32_t duty_cur = LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM;
|
||||
if (duty_cur == s_ledc_fade_rec[speed_mode][channel]->target_duty) {
|
||||
if (s_ledc_fade_rec[speed_mode][channel]->mode == LEDC_FADE_WAIT_DONE) {
|
||||
xSemaphoreGiveFromISR(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, &HPTaskAwoken);
|
||||
if (HPTaskAwoken == pdTRUE) {
|
||||
portYIELD_FROM_ISR();
|
||||
}
|
||||
xSemaphoreGiveFromISR(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, &HPTaskAwoken);
|
||||
if (HPTaskAwoken == pdTRUE) {
|
||||
portYIELD_FROM_ISR();
|
||||
}
|
||||
continue;
|
||||
}
|
||||
uint32_t duty_tar = s_ledc_fade_rec[speed_mode][channel]->target_duty;
|
||||
int scale = s_ledc_fade_rec[speed_mode][channel]->scale;
|
||||
if (scale == 0) {
|
||||
xSemaphoreGiveFromISR(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, &HPTaskAwoken);
|
||||
continue;
|
||||
}
|
||||
int cycle = s_ledc_fade_rec[speed_mode][channel]->cycle_num;
|
||||
|
|
@ -479,6 +552,10 @@ static esp_err_t ledc_fade_channel_deinit(ledc_mode_t speed_mode, ledc_channel_t
|
|||
|
||||
static esp_err_t ledc_fade_channel_init_check(ledc_mode_t speed_mode, ledc_channel_t channel)
|
||||
{
|
||||
if (s_ledc_fade_isr_handle == NULL) {
|
||||
ESP_LOGE(LEDC_TAG, "Fade service not installed, call ledc_fade_func_install");
|
||||
return ESP_FAIL;
|
||||
}
|
||||
if (s_ledc_fade_rec[speed_mode][channel] == NULL) {
|
||||
#if CONFIG_SPIRAM_USE_MALLOC
|
||||
s_ledc_fade_rec[speed_mode][channel] = (ledc_fade_t *) heap_caps_calloc(1, sizeof(ledc_fade_t), MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT);
|
||||
|
|
@ -494,6 +571,7 @@ static esp_err_t ledc_fade_channel_init_check(ledc_mode_t speed_mode, ledc_chann
|
|||
s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem = xSemaphoreCreateBinary();
|
||||
#endif
|
||||
s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux = xSemaphoreCreateMutex();
|
||||
xSemaphoreGive(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem);
|
||||
}
|
||||
if (s_ledc_fade_rec[speed_mode][channel]
|
||||
&& s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux
|
||||
|
|
@ -505,94 +583,123 @@ static esp_err_t ledc_fade_channel_init_check(ledc_mode_t speed_mode, ledc_chann
|
|||
}
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_fade_with_time(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int max_fade_time_ms)
|
||||
static esp_err_t _ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int scale, int cycle_num)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK, LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
|
||||
|
||||
int timer_sel = LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel;
|
||||
uint32_t max_duty = (1 << (LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution)) - 1;
|
||||
LEDC_ARG_CHECK(target_duty <= max_duty, "target_duty");
|
||||
|
||||
uint32_t freq = ledc_get_freq(speed_mode, timer_sel);
|
||||
uint32_t duty_cur = LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM;
|
||||
uint32_t duty_delta = target_duty > duty_cur ? target_duty - duty_cur : duty_cur - target_duty;
|
||||
|
||||
if (duty_delta == 0) {
|
||||
return ESP_OK;
|
||||
}
|
||||
int total_cycles = max_fade_time_ms * freq / 1000;
|
||||
if (total_cycles == 0) {
|
||||
return ledc_set_duty(speed_mode, channel, target_duty);
|
||||
}
|
||||
int scale, cycle_num;
|
||||
if (total_cycles > duty_delta) {
|
||||
scale = 1;
|
||||
cycle_num = total_cycles / duty_delta;
|
||||
} else {
|
||||
cycle_num = 1;
|
||||
scale = (duty_delta + total_cycles - 1) / total_cycles;
|
||||
}
|
||||
return ledc_set_fade_with_step(speed_mode, channel, target_duty, scale, cycle_num);
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int scale, int cycle_num)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
|
||||
LEDC_ARG_CHECK(scale > 0, "scale");
|
||||
LEDC_ARG_CHECK(cycle_num > 0, "cycle_num");
|
||||
|
||||
int timer_sel = LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel;
|
||||
uint32_t max_duty = (1 << (LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution)) - 1;
|
||||
LEDC_ARG_CHECK(target_duty <= max_duty, "target_duty");
|
||||
//disable the interrupt, so the operation will not mess up
|
||||
ledc_enable_intr_type(speed_mode, channel, LEDC_INTR_DISABLE);
|
||||
|
||||
portENTER_CRITICAL(&ledc_spinlock);
|
||||
uint32_t duty_cur = LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM;
|
||||
uint32_t duty_delta = target_duty > duty_cur ? target_duty - duty_cur : duty_cur - target_duty;
|
||||
if (duty_delta == 0) {
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
return ESP_OK;
|
||||
// if duty == max_duty and scale and fade_down == 1, counter would overflow.
|
||||
if (duty_cur == ledc_get_max_duty(speed_mode, channel)) {
|
||||
duty_cur -= 1;
|
||||
}
|
||||
s_ledc_fade_rec[speed_mode][channel]->speed_mode = speed_mode;
|
||||
s_ledc_fade_rec[speed_mode][channel]->target_duty = target_duty;
|
||||
s_ledc_fade_rec[speed_mode][channel]->cycle_num = cycle_num;
|
||||
s_ledc_fade_rec[speed_mode][channel]->scale = scale;
|
||||
int step_num;
|
||||
if (duty_cur > target_duty) {
|
||||
s_ledc_fade_rec[speed_mode][channel]->direction = LEDC_DUTY_DIR_DECREASE;
|
||||
step_num = (duty_cur - target_duty) / scale;
|
||||
step_num = step_num > LEDC_STEP_NUM_MAX ? LEDC_STEP_NUM_MAX : step_num;
|
||||
} else {
|
||||
s_ledc_fade_rec[speed_mode][channel]->direction = LEDC_DUTY_DIR_INCREASE;
|
||||
step_num = (target_duty - duty_cur) / scale;
|
||||
step_num = step_num > LEDC_STEP_NUM_MAX ? LEDC_STEP_NUM_MAX : step_num;
|
||||
int step_num = 0;
|
||||
int dir = LEDC_DUTY_DIR_DECREASE;
|
||||
if (scale > 0) {
|
||||
if (duty_cur > target_duty) {
|
||||
s_ledc_fade_rec[speed_mode][channel]->direction = LEDC_DUTY_DIR_DECREASE;
|
||||
step_num = (duty_cur - target_duty) / scale;
|
||||
step_num = step_num > LEDC_STEP_NUM_MAX ? LEDC_STEP_NUM_MAX : step_num;
|
||||
} else {
|
||||
s_ledc_fade_rec[speed_mode][channel]->direction = LEDC_DUTY_DIR_INCREASE;
|
||||
dir = LEDC_DUTY_DIR_INCREASE;
|
||||
step_num = (target_duty - duty_cur) / scale;
|
||||
step_num = step_num > LEDC_STEP_NUM_MAX ? LEDC_STEP_NUM_MAX : step_num;
|
||||
}
|
||||
}
|
||||
portEXIT_CRITICAL(&ledc_spinlock);
|
||||
if (scale > 0 && step_num > 0) {
|
||||
ledc_duty_config(speed_mode, channel, LEDC_VAL_NO_CHANGE, duty_cur << 4, dir, step_num, cycle_num, scale);
|
||||
ESP_LOGD(LEDC_TAG, "cur duty: %d; target: %d, step: %d, cycle: %d; scale: %d; dir: %d\n",
|
||||
duty_cur, target_duty, step_num, cycle_num, scale, dir);
|
||||
} else {
|
||||
ledc_duty_config(speed_mode, channel, LEDC_VAL_NO_CHANGE, target_duty << 4, dir, 0, 1, 0);
|
||||
ESP_LOGD(LEDC_TAG, "Set to target duty: %d", target_duty);
|
||||
}
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
ledc_set_fade(
|
||||
speed_mode,
|
||||
channel,
|
||||
duty_cur,
|
||||
s_ledc_fade_rec[speed_mode][channel]->direction,
|
||||
step_num,
|
||||
s_ledc_fade_rec[speed_mode][channel]->cycle_num,
|
||||
s_ledc_fade_rec[speed_mode][channel]->scale
|
||||
);
|
||||
ESP_LOGD(LEDC_TAG, "cur duty: %d; target: %d, step: %d, cycle: %d; scale: %d\n",
|
||||
LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM,
|
||||
target_duty,
|
||||
step_num,
|
||||
s_ledc_fade_rec[speed_mode][channel]->cycle_num,
|
||||
s_ledc_fade_rec[speed_mode][channel]->scale
|
||||
);
|
||||
static esp_err_t _ledc_set_fade_with_time(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int max_fade_time_ms)
|
||||
{
|
||||
int timer_sel = LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel;
|
||||
uint32_t freq = ledc_get_freq(speed_mode, timer_sel);
|
||||
uint32_t duty_cur = LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> LEDC_DUTY_DECIMAL_BIT_NUM;
|
||||
uint32_t duty_delta = target_duty > duty_cur ? target_duty - duty_cur : duty_cur - target_duty;
|
||||
|
||||
if (duty_delta == 0) {
|
||||
return _ledc_set_fade_with_step(speed_mode, channel, target_duty, 0, 0);
|
||||
}
|
||||
int total_cycles = max_fade_time_ms * freq / 1000;
|
||||
if (total_cycles == 0) {
|
||||
ESP_LOGW(LEDC_TAG, LEDC_FADE_TOO_FAST_STR);
|
||||
return _ledc_set_fade_with_step(speed_mode, channel, target_duty, 0, 0);
|
||||
}
|
||||
int scale, cycle_num;
|
||||
if (total_cycles > duty_delta) {
|
||||
scale = 1;
|
||||
cycle_num = total_cycles / duty_delta;
|
||||
if (cycle_num > LEDC_DUTY_NUM_HSCH0_V) {
|
||||
ESP_LOGW(LEDC_TAG, LEDC_FADE_TOO_SLOW_STR);
|
||||
cycle_num = LEDC_DUTY_NUM_HSCH0_V;
|
||||
}
|
||||
} else {
|
||||
cycle_num = 1;
|
||||
scale = duty_delta / total_cycles;
|
||||
}
|
||||
return _ledc_set_fade_with_step(speed_mode, channel, target_duty, scale, cycle_num);
|
||||
}
|
||||
|
||||
static void _ledc_fade_start(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_fade_mode_t fade_mode)
|
||||
{
|
||||
s_ledc_fade_rec[speed_mode][channel]->mode = fade_mode;
|
||||
// Clear interrupt status of channel
|
||||
int duty_resolution_ch0 = (speed_mode == LEDC_HIGH_SPEED_MODE) ? LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_S : LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_S;
|
||||
LEDC.int_clr.val |= BIT(duty_resolution_ch0 + channel);
|
||||
// Enable interrupt for channel
|
||||
ledc_enable_intr_type(speed_mode, channel, LEDC_INTR_FADE_END);
|
||||
ledc_update_duty(speed_mode, channel);
|
||||
if (fade_mode == LEDC_FADE_WAIT_DONE) {
|
||||
xSemaphoreTake(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, portMAX_DELAY);
|
||||
}
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_fade_with_time(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, int max_fade_time_ms)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
|
||||
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
|
||||
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
_ledc_set_fade_with_time(speed_mode, channel, target_duty, max_fade_time_ms);
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_fade_with_step(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t scale, uint32_t cycle_num)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_ARG_CHECK((scale > 0) && (scale <= LEDC_DUTY_SCALE_HSCH0_V), "fade scale");
|
||||
LEDC_ARG_CHECK((cycle_num > 0) && (cycle_num <= LEDC_DUTY_CYCLE_HSCH0_V), "cycle_num");
|
||||
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
|
||||
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
|
||||
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
_ledc_set_fade_with_step(speed_mode, channel, target_duty, scale, cycle_num);
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_fade_start(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_fade_mode_t fade_mode)
|
||||
{
|
||||
LEDC_CHECK(s_ledc_fade_rec != NULL, LEDC_FADE_SERVICE_ERR_STR, ESP_ERR_INVALID_STATE);
|
||||
LEDC_ARG_CHECK(fade_mode < LEDC_FADE_MAX, "fade_mode");
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
_ledc_fade_start(speed_mode, channel, fade_mode);
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
|
|
@ -620,19 +727,66 @@ void ledc_fade_func_uninstall()
|
|||
return;
|
||||
}
|
||||
|
||||
esp_err_t ledc_fade_start(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_fade_mode_t wait_done)
|
||||
/*
|
||||
* The functions below are thread-safe version of APIs for duty and fade control.
|
||||
* These APIs can be called from different tasks.
|
||||
*/
|
||||
esp_err_t ledc_set_duty_and_update(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, uint32_t hpoint)
|
||||
{
|
||||
LEDC_CHECK(s_ledc_fade_rec != NULL, LEDC_FADE_SERVICE_ERR_STR, ESP_ERR_INVALID_STATE);
|
||||
LEDC_ARG_CHECK(wait_done < LEDC_FADE_MAX, "wait_done");
|
||||
xSemaphoreTake(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux, portMAX_DELAY);
|
||||
if (wait_done == LEDC_FADE_WAIT_DONE) {
|
||||
s_ledc_fade_rec[speed_mode][channel]->mode = LEDC_FADE_WAIT_DONE;
|
||||
ledc_update_duty(speed_mode, channel);
|
||||
xSemaphoreTake(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_sem, portMAX_DELAY);
|
||||
} else {
|
||||
s_ledc_fade_rec[speed_mode][channel]->mode = LEDC_FADE_NO_WAIT;
|
||||
ledc_update_duty(speed_mode, channel);
|
||||
}
|
||||
xSemaphoreGive(s_ledc_fade_rec[speed_mode][channel]->ledc_fade_mux);
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_ARG_CHECK(duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
|
||||
_ledc_op_lock_acquire(speed_mode, channel);
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
ledc_duty_config(speed_mode,
|
||||
channel, //uint32_t chan_num,
|
||||
hpoint, //uint32_t hpoint_val,
|
||||
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
|
||||
1, //uint32_t increase,
|
||||
1, //uint32_t duty_num,
|
||||
1, //uint32_t duty_cycle,
|
||||
0 //uint32_t duty_scale
|
||||
);
|
||||
ledc_update_duty(speed_mode, channel);
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
_ledc_op_lock_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_fade_time_and_start(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t max_fade_time_ms, ledc_fade_mode_t fade_mode)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_ARG_CHECK(fade_mode < LEDC_FADE_MAX, "fade_mode");
|
||||
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
|
||||
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
|
||||
_ledc_op_lock_acquire(speed_mode, channel);
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
_ledc_set_fade_with_time(speed_mode, channel, target_duty, max_fade_time_ms);
|
||||
_ledc_fade_start(speed_mode, channel, fade_mode);
|
||||
if (fade_mode == LEDC_FADE_WAIT_DONE) {
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
}
|
||||
_ledc_op_lock_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t ledc_set_fade_step_and_start(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t target_duty, uint32_t scale, uint32_t cycle_num, ledc_fade_mode_t fade_mode)
|
||||
{
|
||||
LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
|
||||
LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
|
||||
LEDC_ARG_CHECK(fade_mode < LEDC_FADE_MAX, "fade_mode");
|
||||
LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK , LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
|
||||
LEDC_ARG_CHECK((scale > 0) && (scale <= LEDC_DUTY_SCALE_HSCH0_V), "fade scale");
|
||||
LEDC_ARG_CHECK((cycle_num > 0) && (cycle_num <= LEDC_DUTY_CYCLE_HSCH0_V), "cycle_num");
|
||||
LEDC_ARG_CHECK(target_duty <= ledc_get_max_duty(speed_mode, channel), "target_duty");
|
||||
_ledc_op_lock_acquire(speed_mode, channel);
|
||||
_ledc_fade_hw_acquire(speed_mode, channel);
|
||||
_ledc_set_fade_with_step(speed_mode, channel, target_duty, scale, cycle_num);
|
||||
_ledc_fade_start(speed_mode, channel, fade_mode);
|
||||
if (fade_mode == LEDC_FADE_WAIT_DONE) {
|
||||
_ledc_fade_hw_release(speed_mode, channel);
|
||||
}
|
||||
_ledc_op_lock_release(speed_mode, channel);
|
||||
return ESP_OK;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in a new issue