routeros-scripts/doc/mode-button.md
2020-10-23 21:50:14 +02:00

61 lines
1.6 KiB
Markdown

Mode button with multiple presses
=================================
[◀ Go back to main README](../README.md)
Description
-----------
This script extend the functionality of mode button. Instead of just one
you can trigger several actions by pressing the mode button several times.
The hardware needs to have a mode button, see
`/ system routerboard mode-button`. Starting with RouterOS 6.47beta60 you
can configure the reset button to act the same, see
`/ system routerboard reset-button`.
Copy this code to terminal to check:
```
:if ([ :len [ /system routerboard mode-button print as-value ] ] > 0) do={
:put "Mode button is supported.";
} else={
:if ([ :len [ /system routerboard reset-button print as-value ] ] > 0) do={
:put "Mode button is not supported, but reset button is.";
} else={
:put "Neither mode button nor reset button is supported.";
}
}
```
Requirements and installation
-----------------------------
Just install the script:
$ScriptInstallUpdate mode-button;
Then configure the mode button to run `mode-button`:
/ system routerboard mode-button set enabled=yes on-event="/ system script run mode-button;";
To use the reset button instead:
/ system routerboard reset-button set enabled=yes on-event="/ system script run mode-button;";
Configuration
-------------
The configuration goes to `global-config-overlay`, these are the parameters:
* `ModeButton`: an array with defined actions
* `ModeButtonLED`: led to give visual feedback
Usage and invocation
--------------------
Press the mode button. :)
---
[◀ Go back to main README](../README.md)
[▲ Go back to top](#top)