mirror of
https://github.com/eworm-de/routeros-scripts
synced 2024-05-14 08:04:19 +00:00
121 lines
5.3 KiB
Markdown
121 lines
5.3 KiB
Markdown
Download, import and update firewall address-lists
|
||
==================================================
|
||
|
||
[⬅️ Go back to main README](../README.md)
|
||
|
||
> ℹ️ **Info**: This script can not be used on its own but requires the base
|
||
> installation. See [main README](../README.md) for details.
|
||
|
||
Description
|
||
-----------
|
||
|
||
This script downloads, imports and updates firewall address-lists. Its main
|
||
purpose is to block attacking ip addresses, spam hosts, command-and-control
|
||
servers and similar malicious entities. The default configuration contains
|
||
lists from [abuse.ch](https://abuse.ch/) and
|
||
[dshield.org](https://dshield.org/), and
|
||
lists from [spamhaus.org](https://spamhaus.org/) are prepared.
|
||
|
||
The address-lists are updated in place, so after initial import you will not
|
||
see situation when the lists are not populated.
|
||
|
||
To mitigate man-in-the-middle attacks with altered lists the server's
|
||
certificate is checked.
|
||
|
||
Requirements and installation
|
||
-----------------------------
|
||
|
||
Just install the script:
|
||
|
||
$ScriptInstallUpdate fw-addr-lists;
|
||
|
||
And add two schedulers, first one for initial import after startup, second
|
||
one for subsequent updates:
|
||
|
||
/system/scheduler/add name="fw-addr-lists@startup" start-time=startup on-event="/system/script/run fw-addr-lists;";
|
||
/system/scheduler/add name="fw-addr-lists" start-time=startup interval=2h on-event="/system/script/run fw-addr-lists;";
|
||
|
||
> ℹ️ **Info**: Modify the interval to your needs, but it is recommended to
|
||
> use less than half of the configured timeout for expiration.
|
||
|
||
Configuration
|
||
-------------
|
||
|
||
The configuration goes to `global-config-overlay`, these are the parameters:
|
||
|
||
* `FwAddrLists`: a list of firewall address-lists to download and import
|
||
* `FwAddrListTimeOut`: the timeout for expiration without renew
|
||
|
||
> ℹ️ **Info**: Copy relevant configuration from
|
||
> [`global-config`](../global-config.rsc) (the one without `-overlay`) to
|
||
> your local `global-config-overlay` and modify it to your specific needs.
|
||
|
||
Naming a certificate for a list makes the script verify the server
|
||
certificate, so you should add that if possible. Some certificates are
|
||
available in my repository and downloaded automatically. Import it manually
|
||
(menu `/certificate/`) if missing.
|
||
|
||
Create firewall rules to process the packets that are related to addresses
|
||
from address-lists.
|
||
|
||
### IPv4 rules
|
||
|
||
This rejects the packets from and to IPv4 addresses listed in
|
||
address-list `block`.
|
||
|
||
/ip/firewall/filter/add chain=input src-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
/ip/firewall/filter/add chain=forward src-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
/ip/firewall/filter/add chain=forward dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
/ip/firewall/filter/add chain=output dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
|
||
You may want to have an address-list to allow specific addresses, as prepared
|
||
with a list `allow`. In fact you can use any list name, just change the
|
||
default ones or add your own - matching in configuration and firewall rules.
|
||
|
||
/ip/firewall/filter/add chain=input src-address-list=allow action=accept;
|
||
/ip/firewall/filter/add chain=forward src-address-list=allow action=accept;
|
||
/ip/firewall/filter/add chain=forward dst-address-list=allow action=accept;
|
||
/ip/firewall/filter/add chain=output dst-address-list=allow action=accept;
|
||
|
||
Modify these for your needs, but **most important**: Move the rules up in
|
||
chains and make sure they actually take effect as expected!
|
||
|
||
Alternatively handle the packets in firewall's raw section if you prefer:
|
||
|
||
/ip/firewall/raw/add chain=prerouting src-address-list=block action=drop;
|
||
/ip/firewall/raw/add chain=prerouting dst-address-list=block action=drop;
|
||
/ip/firewall/raw/add chain=output dst-address-list=block action=drop;
|
||
|
||
> ⚠️ **Warning**: Just again... The order of firewall rules is important. Make
|
||
> sure they actually take effect as expected!
|
||
|
||
### IPv6 rules
|
||
|
||
These are the same rules, but for IPv6.
|
||
|
||
Reject packets in address-list `block`:
|
||
|
||
/ipv6/firewall/filter/add chain=input src-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
/ipv6/firewall/filter/add chain=forward src-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
/ipv6/firewall/filter/add chain=forward dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
/ipv6/firewall/filter/add chain=output dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
|
||
|
||
Allow packets in address-list `allow`:
|
||
|
||
/ipv6/firewall/filter/add chain=input src-address-list=allow action=accept;
|
||
/ipv6/firewall/filter/add chain=forward src-address-list=allow action=accept;
|
||
/ipv6/firewall/filter/add chain=forward dst-address-list=allow action=accept;
|
||
/ipv6/firewall/filter/add chain=output dst-address-list=allow action=accept;
|
||
|
||
Drop packets in firewall's raw section:
|
||
|
||
/ipv6/firewall/raw/add chain=prerouting src-address-list=block action=drop;
|
||
/ipv6/firewall/raw/add chain=prerouting dst-address-list=block action=drop;
|
||
/ipv6/firewall/raw/add chain=output dst-address-list=block action=drop;
|
||
|
||
> ⚠️ **Warning**: Just again... The order of firewall rules is important. Make
|
||
> sure they actually take effect as expected!
|
||
|
||
---
|
||
[⬅️ Go back to main README](../README.md)
|
||
[⬆️ Go back to top](#top)
|