routeros-scripts/doc/mod/bridge-port-to.md

81 lines
2.5 KiB
Markdown
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Manage ports in bridge
======================
[◀ Go back to main README](../../README.md)
> **Info**: This module can not be used on its own but requires the base
> installation. See [main README](../../README.md) for details.
Description
-----------
This module and its functio are are supposed to handle interfaces and
switching them from one bridge to another.
Requirements and installation
-----------------------------
Just install the module:
$ScriptInstallUpdate mod/bridge-port-to;
Configuration
-------------
The configuration goes to ports' comments (`/ interface bridge port`).
/ interface bridge port add bridge=br-guest comment="default=dhcp-client, alt=br-guest" disabled=yes interface=en1;
/ interface bridge port add bridge=br-intern comment="default=br-intern, alt=br-guest" interface=en2;
/ interface bridge port add bridge=br-guest comment="default=br-guest, extra=br-extra" interface=en3;
Also dhcp client can be handled:
/ ip dhcp-client add comment="toggle with bridge port" disabled=no interface=en1;
Add a scheduler to start with default setup on system startup:
$ScriptInstallUpdate global-wait;
/ system scheduler add name=bridge-port-vlan on-event="/ system script run global-wait; :global BridgePortTo; \$BridgePortTo default;" start-time=startup;
Usage and invocation
--------------------
The usage examples show what happens with the configuration from above.
Running the function `$BridgePortTo` with parameter `default` applies all
configuration given with `default=`:
$BridgePortTo default;
For the three interfaces we get this configuration:
* The special value `dhcp-client` enables the dhcp client for interface `en1`. The bridge port entry is disabled.
* Interface `en2` is put in bridge `br-intern`.
* Interface `en3` is put in bridge `br-guest`.
Running the function `$BridgePortTo` with parameter `alt` applies all
configuration given with `alt=`:
$BridgePortTo alt;
* Interface `en1` is put in bridge `br-guest`, dhcp client for the interface is disabled.
* Interface `en2` is put in bridge `br-guest`.
* Interface `en3` is unchanged, stays in bridge `br-guest`.
Running the function `$BridgePortTo` with parameter `extra` applies another
configuration:
$BridgePortTo extra;
* Interfaces `en1` and `en2` are unchanged.
* Interface `en3` is put in bridge `br-intern`.
See also
--------
* [Wait for global functions und modules](../global-wait.md)
* [Manage VLANs on bridge ports](bridge-port-vlan.md)
---
[◀ Go back to main README](../../README.md)
[▲ Go back to top](#top)