1.9 KiB
Mode button with multiple presses
ℹ️ Info: This script can not be used on its own but requires the base installation. See main README for details.
Description
This script extend the functionality of mode button. Instead of just one you can trigger several actions by pressing the mode button several times.
The hardware needs to have a mode button, see
/system/routerboard/mode-button. Starting with RouterOS 6.47beta60 you
can configure the reset button to act the same, see
/system/routerboard/reset-button.
Copy this code to terminal to check:
:if ([ :len [ /system/routerboard/mode-button/print as-value ] ] > 0) do={
:put "Mode button is supported.";
} else={
:if ([ :len [ /system/routerboard/reset-button/print as-value ] ] > 0) do={
:put "Mode button is not supported, but reset button is.";
} else={
:put "Neither mode button nor reset button is supported.";
}
}
Requirements and installation
Just install the script:
$ScriptInstallUpdate mode-button;
Then configure the mode button to run mode-button:
/system/routerboard/mode-button/set enabled=yes on-event="/system/script/run mode-button;";
To use the reset button instead:
/system/routerboard/reset-button/set enabled=yes on-event="/system/script/run mode-button;";
Configuration
The configuration goes to global-config-overlay, these are the parameters:
ModeButton: an array with defined actionsModeButtonLED: led to give visual feedback
ℹ️ Info: Copy relevant configuration from
global-config(the one without-overlay) to your localglobal-config-overlayand modify it to your specific needs.
Usage and invocation
Press the mode button. 😜