jack
c384fa2492
rename clock enable and reset bits for SPI modules
...
1.The names of clock enable and reset bits do not match with TRM, just rename them.
2018-05-14 16:45:03 +08:00
XiaXiaotian
42cefc173f
refractor WiFi clock setting
...
Do not set WiFi clock in PHY initializing function, move it to WiFi
start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92
component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
...
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
michael
88f602a0e0
fix(periph_ctrl): fix reset function in periph_ctrl.c
2017-10-17 12:20:40 +08:00
Angus Gratton
0dd9b899b7
periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround
...
Also refactor use of direct clock access in unit test ref_clock (probably not a real issue)
2017-10-02 17:48:16 +11:00
Ivan Grokhotkov
956a28a95c
driver: add periph_ctrl support for SDMMC, SDIO slave, CAN, EMAC
2017-09-04 22:43:51 +08:00
michael
b834fcf78a
fix(spi_master): this fix the SPI MOSI output missing bug.
2017-09-04 22:43:51 +08:00
Tian Hao
26a3cb93c7
component/soc : move dport access header files to soc
...
1. move dport access header files to soc
2. reduce dport register write protection. Only protect read operation
2017-05-09 18:06:00 +08:00
Tian Hao
f7e8856520
component/esp32 : fix dualcore bug
...
1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.
2017-05-08 21:53:43 +08:00
Jeroen Domburg
23455de4c2
Add SPI Master driver, example, test and docs
2017-01-06 14:20:32 +08:00
Wangjialin
a97e076dec
add pcnt.rst
2016-11-23 19:07:30 +08:00
Wangjialin
6db1482cd5
Merge branch 'master' into driver_merge_tmp/merge_pcnt
...
# Conflicts:
# components/driver/include/driver/periph_ctrl.h
2016-11-23 18:15:54 +08:00
Wangjialin
6a1dbc3f1c
add RMT driver and example
2016-11-22 00:57:19 +08:00
Wangjialin
1cc1d9d721
driver: Add PCNT code
...
1. add PCNT module in periph_ctrl.c/.h
2. add description of PCNT status in pcnt_struct.h
3. add PCNT driver code
4. add PCNT example code.
2016-11-21 18:17:07 +08:00
Wangjialin
d82cb7f60f
Modify spinlock error in periph_ctrl.c
2016-09-29 11:50:25 +08:00
Wangjialin
e523a2532a
Modify LEDC driver
...
1. configure LEDC timer saparately
2. add peripher_crtl.c/.h
To enable the peripheral modules, we have to set/clear the control register in dport_reg.h.
These bits are disabled by default and they are all in a same register, so we need to add a lock on that.
3. add include esp_err.h in gpio.h
2016-09-28 23:20:34 +08:00
