Commit graph

34 commits

Author SHA1 Message Date
Taavi Hein
f7749e18a8 gpio: Bitmask overflow fix in gpio_reset_pin
For pins 32 and up the BIT(nr) macro used here overflowed,
causing undetermined GPIO pins to be reset.
Example: freeing SPI device/bus where CS is on pin 33
caused debug UART to cease communication, TXD0 was
disabled.

Fixed as BIT64(nr) macro, to be used elsewhere as needed.
For example in definitions like GPIO_SEL_32..GPIO_SEL_39.
2018-08-08 15:31:17 +03:00
hou wen xiang
5402ace528 driver(gpio) : Fixed the gpio related bug for release v3.1. 2018-07-12 20:19:02 +08:00
Konstantin Kondrashov
32da455384 soc: Fix check_long_hold_gpio and move def to soc
Fix factory_reset_pin init as input
Move definition a structure rtc_gpio_desc to soc

Closes https://github.com/espressif/esp-idf/issues/2030
2018-06-22 09:20:27 +05:00
Michael (XIAO Xufeng)
77077196fd fix(spi): reset gpios that used by spi when deinited 2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
1f085b1a3b feat(gpio): add function allowing switching input source from GPIO back to IOMUX 2018-05-08 15:47:25 +08:00
Ivan Grokhotkov
b297b72abb Merge branch 'bugfix/fix_gpio_install_isr_service_check_value' into 'master'
driver(gpio): modify return value when gpio ISR service already exists.

See merge request idf/esp-idf!2125
2018-04-19 15:01:50 +08:00
kooho
ccf09c3b39 driver(gpio): Add api support digital pad hold function. 2018-04-10 11:31:59 +08:00
kooho
8e1f930582 driver(gpio): Modified the GPIO_CHECK's return value when ISR service already installed 2018-03-29 09:58:31 +08:00
Angus Gratton
4297c337f9 esp32: Add IO_MUX_GPIOxx register names to match iomux names used in TRM
The TRM describes IOMUX registers are IO_MUX_x_REG for x in GPIO0-39.

Until now ESP-IDF describes them as PERIPHS_IO_MUX_(pinname)_U

This commit adds additional IOMUX register names which match the ones used in the TRM.
2018-01-30 17:09:37 +08:00
kooho
ada33fe3dd Add GPIO input and output disable option 2017-11-22 15:00:27 +08:00
Wangjialin
c30149e4bd feature(gpio): add APIs to set and get pad drive capability. RTC pads use RTC registers to contol drive capability. 2017-07-19 11:23:41 +08:00
Angus Gratton
17747b3358 gpio driver: Clear GPIO matrix output config when setting pin as input
Otherwise, if a non-GPIO peripheral has been routed to this pin
(as an output), output driver can remain enabled.
2017-06-26 12:47:08 +10:00
Michel Pollet
349a77cb55 components/driver: 'const' all config calls.
Some were, some weren't. They all could/should be.

Signed-off-by: Michel Pollet <buserror@gmail.com>
2017-04-13 18:33:33 +01:00
Jan Schmidt
ac412feb69 gpio: Attach gpio intr to the isr_server on the right core.
Make sure GPIO interrupts get attached to the core that
the ISR service routine is running on, otherwise they
don't arrive.
2017-01-20 14:56:59 +11:00
Wangjialin
ade7ee2092 gpio_driver: add per-pin interrupt handlers
1. add ISR handler apis so that users of different layers can hook their own isr handler on different GPIO.
    Audio project has different software layers, they need different gpio isr handler for layer instead of processing all GPIO interrupts in one handler.
    If this kind of calling a handler from isr is not proper, please kindly point out.
2. add gpio example code.
3. improve gpio.rst
4. add readme for gpio example

Squashed commits:
[278e50f] update: GPIO
1. coding style, add a space between conditional or loop keyword and an opening paren.
2. modify some return value and doc
3. use printf in example code
Squashed commits:
[efb23bb] minor change of comment
2016-12-29 11:16:32 +08:00
Angus Gratton
ff1fa8a323 gpio driver: Fix gpio_set_level validation of gpio_num argument
Closes #125 https://github.com/espressif/esp-idf/issues/125
2016-12-28 10:17:56 +11:00
Wangjialin
b00b75db7e driver: sigma-delta
1. add sigma-delta code and example.
2. add gpio output signal in io matrix.

Squashed commits:
[a25e7d4] minor changes for doc
[6a03a1e] minor changes on comments and doc.
[97dd9e4] Add doc.
update index.rst
change example index
2016-12-18 17:20:17 +08:00
Ivan Grokhotkov
3b854fe46a deep sleep: implement wake up using ULP, EXT0, EXT1 sources
This adds the following APIs to enable various wakeup sources:
- esp_deep_sleep_enable_timer_wakeup
- esp_deep_sleep_enable_ulp_wakeup
- esp_deep_sleep_enable_ext0_wakeup
- esp_deep_sleep_enable_ext1_wakeup

And an API to start deep sleep:
- esp_deep_sleep_start
2016-12-16 14:30:27 +08:00
Ivan Grokhotkov
1c60a0450e Merge branch 'bugfix/driver_cleanup_log' into 'master'
drivers: remove file paths from log statements

Function name and error string are usually sufficient to find the place which has triggered an error. 

`__FILE__` macro generates a string which has absolute file name (with our build system), which add many long strings to the program binary.

Also change log tags to lower case to match style used elsewhere.

Fixes https://github.com/espressif/esp-idf/issues/126

See merge request !282
2016-12-12 10:15:25 +08:00
Jeroen Domburg
ae8c37e0b6 Add disabling/enabling of shared interrupt, add testcase for interrupts 2016-12-08 12:39:33 +08:00
Jeroen Domburg
655fd2986a Add interrupt allocation scheme / interrupt sharing. Also modifies drivers and examples. Also allows interrupts
to be marked specifically as having a handler that's all in IRAM.
2016-12-08 12:39:33 +08:00
Chu Shu Chen
b1db2721dc driver: add rtc module and bugfix gpio32 gpio33
feature(rtc_module):add rtc module

1. add rtc io control API (pull,output and input)
2. add touch pad API (touch pad read and interrupt)
3. add adc1 API (the max width is 12 Bits and support attenuation)
4. add hall sensor API (support hall sensor read )
5. add dac API (the width is 8 Bits)

bugfix(gpio):gpio32 and gpio33 can not output and input

the gpio32 and gpio33 is initialize by librtc.a,and gpio_config not initialize the gpio as
digital gpio.they can not output and input,when users use gpio32 or gpio33.And there are some problems
about others driver ,when they use gpio32 or gpio33 as  matrix.
2016-12-07 15:56:13 +08:00
Ivan Grokhotkov
0dff9ed79d drivers: remove file paths from log statements
Function name and error string are usually sufficient to find the place which has triggered an error. __FILE__ macro generates a string which has absolute file name (with our build system), so there is a lot of long strings present in the program because of that.

Fixes https://github.com/espressif/esp-idf/issues/126
2016-12-07 12:01:54 +08:00
Gabe
c6016952e8 Pullup is not configured by gpio_config #110 2016-11-21 11:11:13 +08:00
Jeroen Domburg
64a2f0ee0b Amend gpio driver to work around SoC bug with some pullups/pulldowns in the GPIO peripheral; mark existing function that does not always work as deprecated 2016-11-15 10:29:52 +08:00
Wangjialin
e452278194 Minor changes for driver
1. remove "\n" when calling ESP_LOGX APIs.
2. modify uart_event_t for uart rx data.
3. use MICRO for uart inverse value
4. add uart_tx_data_t for internal tx function.
2016-11-07 14:16:52 +08:00
Wangjialin
3ec23f1b83 Modify as Angus's suggestion:
1. Set XXX_TAG static, remove extern XXX_TAG in uart.h/ledc.h/gpio.h
2. I removed uart_set/get_print_port() functions, these functions are not well tested, I removed them for now.
3. Modify some function names for uart_read/write_bytes
4. Modify uart_write_bytes and uart_write_bytes_with_break.
2016-11-04 12:52:34 +08:00
Wangjialin
74aff2b9d2 Update UART driver
1. Use esp_log API for LEDC and GPIO code.
2. Modify some API return value.
3. Add ledc_set_pin() for LEDC
4. Modify typo in uart.h

Questions: In uart driver ISR handler, I used xxxFromISR , like xSemaphoreGiveFromISR, do those FromISR functions need to be put in IRAM?
2016-10-24 15:57:23 +08:00
Jeroen Domburg
82df5f9aa0 Convert Windows -> Unix line ends in gpio.c 2016-10-08 14:12:55 +08:00
Wangjialin
3f1c5c4d5b 1. add a macro 'GPIO_IS_VALID_OUTPUT_GPIO' and 'GPIO_IS_VALID_OUTPUT_GPIO' in gpio.h
2. add PIN_FUNC_GPIO in io_mux_reg.h, put the io_mux_regs in order
3. use braces around single line if statements in ledc.c and gpio.c
2016-09-23 14:52:26 +08:00
Wangjialin
92569082c6 Remove some macros and declarations that are already in rom/gpio.h 2016-09-21 12:08:42 +08:00
Wangjialin
f7b10745be Remove mutex from GPIO driver code. Replace uint8_t/uint16_t with uint32_t 2016-09-21 09:51:37 +08:00
Wangjialin
948be5c0c4 modify typo 2016-09-19 17:50:18 +08:00
Wangjialin
2be163f6cc add gpio driver code 2016-09-19 17:33:21 +08:00