Commit graph

516 commits

Author SHA1 Message Date
Ivan Grokhotkov
229f67b816 sdspi: handle delayed R1 responses for data read commands 2018-03-30 18:49:42 +08:00
Ivan Grokhotkov
bbbdec24d9 sdspi: handle error flags for R3/R7 responses
Previously error flags were only handled for R1 responses. This change
moves error handling into a separate function and calls it for R1/R3/R7.
2018-03-30 18:49:42 +08:00
Jiang Jiang Jian
8b9f237cb9 Merge branch 'feature/i2s_add_expand_function' into 'master'
add a new i2s feature to expand the original i2s width

See merge request idf/esp-idf!1617
2018-03-30 14:51:23 +08:00
kooho
8e1f930582 driver(gpio): Modified the GPIO_CHECK's return value when ISR service already installed 2018-03-29 09:58:31 +08:00
Ivan Grokhotkov
1a157279e0 Merge branch 'doc/adc1_channel_config' into 'master'
adc: Add doc details about configure not needed before each read

See merge request idf/esp-idf!2132
2018-03-28 19:11:44 +08:00
Michael (Xiao Xufeng)
cef8baf424 bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.
refactor structure of ``rtc_module.c`` to make it more clearly.

Closes https://github.com/espressif/esp-idf/issues/1517
2018-03-28 17:10:01 +08:00
Angus Gratton
4507b3fde6 adc: Add doc details about configure not needed before each read 2018-03-28 11:52:41 +11:00
Ivan Grokhotkov
2935e958fc Merge branch 'bugfix/adc2_cct' into 'master'
fix(adc2): fix cct and xpd configurations to improve precision of ADCs

See merge request idf/esp-idf!2020
2018-03-27 16:23:43 +08:00
Ivan Grokhotkov
892f3907fa Merge branch 'bugfix/i2c_ack_error_bug' into 'master'
driver(i2c):  Fixed i2c interrupt wdt timeout bug

See merge request idf/esp-idf!2049
2018-03-27 12:29:23 +08:00
Michael (Xiao Xufeng)
7563510758 feat(spi_master): allow output high speed data when dummy bits are not used. 2018-03-26 21:24:32 +08:00
michael
28e832c37e fix(adc2): fix cct and xpd configurations to improve precision of ADCs 2018-03-26 12:02:26 +00:00
kooho
37db055cff driver(i2c): Fixed ack_err interrupt can't exit bug. 2018-03-26 16:31:17 +08:00
Zhang Zhao Xiang
f48ecb8613 Add a new i2s feature to expand the original i2s width 2018-03-22 18:52:55 +08:00
Ivan Grokhotkov
7e2028d598 Merge branch 'bugfix/gpio_timer_doc_fixes' into 'master'
Minor fixes of GPIO and timer group driver docs

See merge request idf/esp-idf!2081
2018-03-20 10:49:36 +08:00
Ivan Grokhotkov
b9a8912659 Merge branch 'bugfix/spi_master_const_dev_config_t' into 'master'
spi master: use constant dev_config parameter in spi_bus_add_device

See merge request idf/esp-idf!2082
2018-03-19 16:31:19 +08:00
Jonathan Kaufmann
a99d4d5a7f Modified spi_bus_add_device so that it takes a constant *dev_config parameter.
Merges https://github.com/espressif/esp-idf/pull/1690
2018-03-19 12:17:45 +08:00
Stefan Tauner
38daa1e716 docs: fix description of timer_get_alarm_value()
Replace c&p text with an actual description.

Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Stefan Tauner
86a1d579ff docs: add warning to gpio_get_level()
On most microcontrollers I have worked with one can retrieve the
current state of output GPIO pins. On ESP32 this is not the case
if the pad is not explictly configured to route this information into
the port by configuring it as input or i/o.
Thus add a warning to the API documentation of gpio_get_level().

Merges https://github.com/espressif/esp-idf/pull/1740
2018-03-19 11:56:57 +08:00
Michael (Xiao Xufeng)
15be0829fa test(spi_master): test spi master speed performance by median value.
also increase the boundary of SPI limit by a little.
2018-03-16 16:37:19 +08:00
Xu Chun Guang
973913b151 feat: Adjust log level about UART
There are too many log when UART baud is around 2Mbps if not use hard flow control.
2018-03-13 16:01:37 +08:00
Ivan Grokhotkov
c8ba6cf156 Merge branch 'feature/rtc_gpio_isolate' into 'master'
Add rtc_gpio_isolate function, use it in deep sleep examples

See merge request idf/esp-idf!1936
2018-02-26 06:09:08 +08:00
Angus Gratton
63ddae5087 Merge branch 'bugfix/i2s_driver' into 'master'
i2s: add support fixed_mclk configuration

See merge request idf/esp-idf!1600
2018-02-22 12:03:26 +08:00
Tuan PM
7cda34c626 i2s: add support fixed_mclk configuration 2018-02-22 09:00:23 +07:00
h3ndrik
dcc466a673 i2s: fix type mismatch of intr_alloc_flags
Merges https://github.com/espressif/esp-idf/pull/1589
2018-02-16 16:20:12 +11:00
Ivan Grokhotkov
363c096f2b Merge branch 'test/adc2_with_wifi_reopen' into 'master'
test(adc2): re-enable the adc2 test.

See merge request idf/esp-idf!1926
2018-02-11 22:32:18 +08:00
Ivan Grokhotkov
f45622ff17 driver/rtc: add rtc_gpio_isolate helper function to disconnect RTC IO 2018-02-11 13:18:51 +08:00
Ivan Grokhotkov
e381c6adde Merge branch 'bugfix/fix_i2s_adc_mode' into 'master'
driver(i2s): fix broken i2s adc mode

See merge request idf/esp-idf!1653
2018-02-11 12:58:58 +08:00
Ivan Grokhotkov
62f924544d Merge branch 'test/spi_performance' into 'master'
test(spi_master): add performance display for spi master.

See merge request idf/esp-idf!1923
2018-02-08 22:59:40 +08:00
michael
687d6aa2cd test(adc2): re-enable the adc2 test. 2018-02-08 13:48:25 +08:00
Jeroen Domburg
35de8d703e Merge branch 'bugfix/spi_gpio0' into 'master'
fix(spi): several fixes about maros (flags) and GPIO0.

See merge request idf/esp-idf!1666
2018-02-07 18:50:13 +08:00
Michael (Xiao Xufeng)
a151767426 test(spi_master): add performance display for spi master. 2018-02-07 17:50:13 +08:00
Wangjialin
451f69cc2e driver(i2s): fix broken i2s adc mode
1. Move i2s reset code from i2s_stop to i2s_start.
2. add RTC API to set sw mode for ADC
3. add description for adc_power_always_on()
4. add lock for i2s dma and RTC ADC functions.
5. add ADC read task in example

reported from bbs:  https://esp32.com/viewtopic.php?f=13&t=3490&p=17522#p17522
reported from github: https://github.com/espressif/esp-idf/issues/1333
2018-02-07 17:17:20 +08:00
Michael (XIAO Xufeng)
e14e1508cb fix(sdmmc_host): fix the issue when slot and host flag are not compatible. 2018-02-07 12:05:05 +08:00
Michael (XIAO Xufeng)
8abbb17401 feat(sdmmc_host): force pull-up DAT3 for SD 4-bit mode so that slave will not fall into SPI mode. 2018-02-07 12:05:05 +08:00
Michael (Xiao Xufeng)
5214a0600c test(adc2): temporary ignore adc2 unit test (with WiFi) to pass the CI.
the issue is introduced in commit 17f01eb718.
2018-02-06 11:59:40 +08:00
Angus Gratton
4297c337f9 esp32: Add IO_MUX_GPIOxx register names to match iomux names used in TRM
The TRM describes IOMUX registers are IO_MUX_x_REG for x in GPIO0-39.

Until now ESP-IDF describes them as PERIPHS_IO_MUX_(pinname)_U

This commit adds additional IOMUX register names which match the ones used in the TRM.
2018-01-30 17:09:37 +08:00
michael
be96e1db95 fix(spi): fix typo of LSBFIRST macro.
Closes https://github.com/espressif/esp-idf/issues/1480, Closes https://github.com/espressif/esp-idf/issues/1464
2018-01-29 17:44:37 +08:00
michael
8900200147 fix(spi_master): fix the variable command and address flag issue.
Closes https://github.com/espressif/esp-idf/issues/1549
2018-01-29 17:44:36 +08:00
michael
60469c500a fix(spi): fix pin issue with GPIO0 (other pins than CS). 2018-01-29 17:44:36 +08:00
Wangjialin
3da8f2eda1 bugfix(touch): change the default value for sar_touch_enable register.
Reported from github: https://github.com/espressif/esp-idf/issues/1236

All the touch channels are enabled by default in hardware. This would interfere other RTC function on Touch IOs.
Disable touch function in touch_pad_init().
2018-01-29 15:40:21 +08:00
Wangjialin
870efdb9d4 bugfix(uart): patten detect function
requirement from github(https://github.com/espressif/esp-idf/issues/805): to provide the position in the buffer of the pattern detected.

requirement from AT application: in AT app, when no hardware flow control is enabled, in some situation the rx buffer might be full, and the terminator “+++” might be lost, we can use pattern detect interrupt to avoid missing the terminator. When pattern detect interrupt happens, it will not send a data event at the same time.

1. Add API to get position of detected pattern in rx buffer
2. Modify UART event example
3. Add comments for uart_flush, add alias API uart_flush_input to clear the rx buffer
4. Modify the way rx_buffered_len is calculated
2018-01-22 13:33:51 +08:00
kooho
492db0591d Fix uart fifo overflow bug 2018-01-12 14:42:54 +08:00
Angus Gratton
2227c44254 rmt: Add void * argument for end-of-transmission callback
Ref https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:31:59 +11:00
Krzysztof Bociurko
1066c74b74 rmt: Adds a simple handler that can be called when transmission ends.
Merges https://github.com/espressif/esp-idf/pull/1174
2018-01-05 17:14:02 +11:00
Ivan Grokhotkov
30aacb79d5 Merge branch 'bugfix/uart_semaphore_pr1387' into 'master'
uart driver: Remove unnecessary xSemaphoreGive()

See merge request !1739
2018-01-05 11:05:05 +08:00
Angus Gratton
6e23ee704b Merge branch 'refactor/spi_clk_pre_cal' into 'master'
bugfix(spi_master): improve spi time cost for each transfer.

See merge request !1670
2018-01-04 06:03:12 +08:00
Alexey Morozov
25b8642835 uart driver: Remove unnecessary xSemaphoreGive()
avoid unnecessary call of xSemaphoreGive(p_uart_obj[uart_num]->tx_mux);

Merges https://github.com/espressif/esp-idf/pull/1387
2018-01-03 13:44:19 +11:00
Per Malmberg
f7f52414ec Removed logging in RMT driver which skews the timing. Issue #1345
Merges https://github.com/espressif/esp-idf/pull/1450
2018-01-03 10:50:03 +11:00
Per Malmberg
5fb16d9b2b Fix regression in i2c_master_read() which rejected all data lenths. 2017-12-28 14:54:15 +01:00
michael
2552fdccd1 chore(spi): add log to show native pins or not when configure pins. 2017-12-28 12:03:29 +08:00
michael
f4be6ac84d fix(spi_master): fix the logic in the ISR to prevent re-config registers when device is not changed. 2017-12-28 12:03:29 +08:00
michael
7a7b8fc182 refactor(spi_master): move the clock calculation from ISR to initialization. 2017-12-28 12:03:28 +08:00
Angus Gratton
ec7cac5fe8 Merge branch 'feature/docs_update_rmt_api' into 'master'
RMT API docs update, new example

See merge request !1564
2017-12-27 09:23:47 +08:00
kooho
d78be97154 add NACK for the last byte to read 2017-12-26 21:50:18 +08:00
Angus Gratton
661d584ae7 Merge branch 'bugfix/i2c_fixes_pr1180' into 'master'
i2c: rx <-> tx typo's, NULLing free'd variable, consistent CRITICAL sects

See merge request !1551
2017-12-18 06:44:33 +08:00
Angus Gratton
8f874aaa0f Merge branch 'bugfix/i2c_use_queue_instead_of_eventbit' into 'master'
bugfix(i2c): use queue instead of event group for internal commands

See merge request !1616
2017-12-15 13:54:03 +08:00
Chuck Todd
d913fff6d7 i2c: rx <-> tx typo's, NULLing free'd variable, consistent CRITICAL sects
A couple of typos referencing tx_ring_buf when rx_ring_buf, slv_tx_mux
instead of slv_rx_mux.

Also, I2C_ENTER_CRITICAL()/I2C_EXIT_CRITICAL() usage was not consistent.
Only some of the _set_ functions had them.  Most of the _get_ function
had them?  It is my understanding that they should be wrapped around
writes, not reads? (I think we still need the lock for reading pairs of consistent values)

Also, the ticks_to_wait timeout handling in i2c_master_cmd_begin() would
not handle integer rollover correctly.

Merges https://github.com/espressif/esp-idf/pull/1180
2017-12-11 11:08:39 +08:00
Ivan Grokhotkov
269486ca4d sdspi: use response timeout passed from upper layer
Previously SDSPI host driver would rely on retry count when waiting for
the card to read or write data. This caused different timeout times
depending on CPU frequency and card clock frequency. In practice, card
performance does not depend on these two factors.
This change uses timeout_ms field of sdmmc_command_t introduced
previously for SDMMC host.

Fixes https://esp32.com/viewtopic.php?f=2&t=3440&p=16037 and similar
issues related to SDSPI timeouts.
2017-12-11 11:07:08 +08:00
Fabiano Kovalski
9075b507b5 driver(i2c): corrected timeout range for i2c_set_timeout.
Merges https://github.com/espressif/esp-idf/pull/1353
2017-12-08 14:26:35 +08:00
krzychb
421592a8eb LEDC Driver: Added back original definitions of 'duty_resolution' and 'clock_divider'. This update is to provide backward compatibility with ESP-IDF 2.1. 2017-12-04 21:12:56 +01:00
Jiang Jiang Jian
c672fc54fd Merge branch 'feature/ledc_more_meaningful_parameter_names' into 'master'
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resoluti…

See merge request !1440
2017-12-01 19:33:53 +08:00
krzychb
866b84b9f8 Typo fix. Closes https://github.com/espressif/esp-idf/issue/1323 2017-12-01 09:06:08 +01:00
Wangjialin
bf3c41bb92 bugfix(i2c): use queue instead of event group for internal commands
Reported from github:
https://github.com/espressif/esp-idf/issues/1312
https://github.com/espressif/esp-idf/issues/1193

Issues:
1. We used to use event group in the driver, which would cause:
    a. longer operation time since the event group are based on FreeRTOS timer.
    b. Operation fails if the timer queue is not long enough.
2. There might be some issue with event group, we will still try to provide a small test code in other branch.

modification:
1. use queue instead of event-bit for internal commands
2. use queue overwrite for cmd_done event
2017-11-29 12:33:11 +08:00
Angus Gratton
5e7478a055 Merge branch 'bugfix/ledc_fade_scale' into 'master'
driver(LEDC): add scale value check in ledc_set_fade API

See merge request !1583
2017-11-27 07:23:19 +08:00
panfeng
b553c925b1 bugfix: while scale equals 0 will cause crash 2017-11-23 17:56:18 +08:00
kooho
ada33fe3dd Add GPIO input and output disable option 2017-11-22 15:00:27 +08:00
krzychb
2ec35f60ca RMT API docs update, new example 2017-11-21 22:34:23 +01:00
Ivan Grokhotkov
4b8f55aadf Merge branch 'bugfix/minor_fixes_github' into 'master'
Minor fixes from github

See merge request !1555
2017-11-20 15:58:34 +08:00
Angus Gratton
f54e99008d spi: Add ESP_ERR_NO_MEM to spi_device_queue_trans() documentation
Ref https://github.com/espressif/esp-idf/pull/1243#issuecomment-343103414
2017-11-20 16:06:59 +11:00
michael
02573a8dc9 fix(spi_master): release temporary memory when queue new trans timeout. 2017-11-17 12:15:19 +08:00
michael
13d38f10ee test(spi): internal connection test master with slave for address and command field. 2017-11-17 12:15:19 +08:00
michael
57e1d47ad7 fix(spi_master): fix the CS pin issue with GPIO 0.
Closes #909
2017-11-17 12:15:19 +08:00
michael
842292523f fix(spi_slave): add interrupt free into bus free process. 2017-11-17 12:14:40 +08:00
Raphael Luba
31711b5ac7 SPI: Document TIMEOUT return values
`spi_device_queue_trans` and `spi_device_get_trans_result` can return `ESP_ERR_TIMEOUT` – but this had not been documented.

Merges https://github.com/espressif/esp-idf/pull/1243
2017-11-17 10:50:54 +11:00
krzychb
d488bb7bac Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider' 2017-11-15 08:08:12 +01:00
Ivan Grokhotkov
da141a2c7e Merge branch 'bugfix/touch_pad_register_mismatch' into 'master'
Bugfix/touch pad register mismatch

See merge request !1469
2017-11-15 14:52:13 +08:00
Wangjialin
7200b2cc11 bugfix(touch): registers of touchpad 8 and 9 are mismatched
1. All the registers of touch sensor 8 and 9 are mismatched except the ‘dac’ field in touch register of RTC IO
2. To swap the index for sensor 8 and 9 in APIs.
2017-11-14 18:47:56 +08:00
Ivan Grokhotkov
09d2791cfd Merge branch 'feature/spi_variable_len' into 'master'
feat(spi_master): add new feature allow use variable command and address field length for the same device.

See merge request !1322
2017-11-14 00:08:50 +08:00
Ivan Grokhotkov
5404252e80 Merge branch 'bugfix/uart_fifo_bug_workaround' into 'master'
bugfix(uart): workaround for uart fifo reset issue

See merge request !1499
2017-11-13 17:46:42 +08:00
Wangjialin
4052803e16 bugfix(uart): workaround for uart fifo reset issue
Reported from github:
https://github.com/espressif/esp-idf/issues/1219
https://github.com/espressif/esp-idf/issues/1202

After providing a simple code to digital team, they confirmed that this is a hardware bug.

Root cause:
The fifo reset signal is incorrectly connected
If we want to reset tx fifo of UART2, we have to set txfifo_rst bit of both UART1 and UART2
If we want to reset rx fifo of UART2, we have to set rxfifo_rst bit of both UART1 and UART2

Workaround:
we don't use fifo rst bit in driver.

Documentation:
Digital team would update TRM and give more explanation about this issue.
2017-11-13 15:23:00 +08:00
Anton Maklakov
27c1fc52ba Added .command_timeout_ms = 0 to SDSPI_HOST_DEFAULT() too 2017-11-08 12:52:50 +08:00
Philip Ashmore
d72bef02e9 Added .command_timeout_ms = 0 to SDMMC_HOST_DEFAULT() in components/driver/include/driver/sdmmc_host.h 2017-11-03 17:15:44 +08:00
XiaXiaotian
42cefc173f refractor WiFi clock setting
Do not set WiFi clock in PHY initializing function, move it to WiFi
   start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92 component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
michael
0330ec270a feat(spi_master): add new feature allow use variable command and address field length for the same device.
Closes #654
2017-10-30 19:33:41 +08:00
Angus Gratton
7c9b24b407 Merge branch 'bugfix/fix_uart_vfs_test_error' into 'master'
bugfix(uart): Don't disable console uart peripheral

See merge request !1456
2017-10-27 19:20:13 +08:00
Wangjialin
102eb96c8b bugfix(uart): Don't disable console UART peripheral 2017-10-27 16:46:10 +08:00
Angus Gratton
ffeecde9e2 Merge branch 'feature/docs_update_timer_api' into 'master'
Timer API docs update, refactored example

See merge request !1316
2017-10-27 13:31:18 +08:00
krzychb
9b7d5d76a7 Timer API docs update, refactored example 2017-10-27 07:13:59 +02:00
Angus Gratton
f5b3a370cd Merge branch 'feature/adc2_driver' into 'master'
feature(adc2): add support to use ADC2 when WIFI is disabled

See merge request !1237
2017-10-26 15:48:48 +08:00
michael
87f2b27dc4 refactor(rtc): re-organize code in rtc_module.c 2017-10-26 14:35:30 +08:00
michael
d30f3e7aa8 example(adc2): add example and test case for adc2.
closes #461
2017-10-26 14:35:30 +08:00
esp32de
7c0020bfd0 feat(adc2): append adc2 support and api and the lock with WIFI module
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Wangjialin
303b9f60db bugfix(uart): set default tx idle num
Reported from:
https://github.com/espressif/esp-idf/issues/703
https://github.com/espressif/esp-idf/issues/917
In uart driver we didn't change the default value of tx idle num, so there would be a delay after tx FIFO is empty.

1. Add API to set tx idle interval before next data transmission. (The UART hardware can add an interval after tx FIFO is empty).
2. Set default tx idle interval to zero.
3. Add hardware disable in uart driver delete function.
2017-10-25 13:29:02 +08:00
michael
a6ac5b33c9 feat(rtc): open adc*(dac)_pad_get_io_num functions to public. 2017-10-24 12:06:14 +08:00
michael
cff8d30c25 refactor(rtc): change register writing from macros to structures in *_struct.h 2017-10-24 12:05:52 +08:00
Angus Gratton
01befe4d6a Merge branch 'bugfix/i2c_hw_fsm_recover' into 'master'
bugfix(i2c): add I2C hardware reset if the hw FSM get stuck

See merge request !1272
2017-10-23 10:16:02 +08:00
Ivan Grokhotkov
f039aac1e5 Merge branch 'bugfix/i2s_bck_polariy' into 'master'
bugfix(i2s): fix bck polarity issue when using pll clock.

See merge request !1428
2017-10-22 12:36:27 +08:00
Ivan Grokhotkov
000a4f5941 Merge branch 'bugfix/rmt_thresh_check' into 'master'
bugfix(rmt): fix event thresh check issue

See merge request !1423
2017-10-22 12:35:44 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request !1189
2017-10-22 12:34:11 +08:00
Wangjialin
ed1e32f583 bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
Reported from different sources from github or bbs:

https://github.com/espressif/esp-idf/issues/680

https://github.com/espressif/esp-idf/issues/922

We tested reading several sensor or other I2C slave devices, if the power and SDA/SCL wires are in proper condition, everything works find with reading the slave.
If we remove the power supply for the slave during I2C is reading, or directly connect SDA or SCL to ground, this would  cause the I2C FSM get stuck in wrong state, all we can do is the reset the I2C hardware in this case.
After this commit, no matter whether the power supply of I2C slave is removed or SDA / SCL are shorted to ground, the driver can recover from wrong state.

We are not sure whether this the save issue with the reported one yet, but to make the driver more robust.

Further information:

1. For I2C master mode, we have tested different situations, e.g., to short the SDA/SCL directly to GND/VCC, to short the SDA to SCL, to un-plug the slave device, to power off the slave device. Under all of those situations, this version of driver can recover and keep working.
2. Some slave device will die by accident and keep the SDA in low level, in this case, master should send several clock to make the slave release the bus.
3. Slave mode of ESP32 might also get in wrong state that held the SDA low, in this case, master device could send a stop signal to make esp32 slave release the bus.

Modifications:

1. Disable I2C_MASTER_TRAN_COMP interrupt to void extra interrupt.
2. Disable un-used timeout interrupt for slave.
3. Add bus reset if error detected for master mode.
4. Add bus clear if SDA level is low when error detected.
5. Modify the argument type of i2c_set_pin.
6. add API to set timeout value
7. add parameter check for timing APIs
2017-10-21 02:10:59 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Angus Gratton
477ed8ce62 Merge branch 'bugfix/touchpad_dac_mismatch_on_tp8_tp9' into 'master'
bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9.

See merge request !1288
2017-10-20 14:18:32 +08:00
Wangjialin
a84db78eb1 bugfix(i2s): fix bck polarity issue when using pll clock.
reported from github: https://github.com/espressif/esp-idf/issues/1119

Digital team think it is due to the decimal divider.
We can reset the i2s tx and rx when calling i2s_stop to avoid this.
2017-10-19 23:23:01 +08:00
Wangjialin
ab1abff080 bugfix(rmt): fix event thresh check issue
reported from: https://github.com/espressif/esp-idf/issues/1011

1. Fix event thresh check issue
2. Change IO number in example in case it conflicts with GPIO16(psram cs pin).
2017-10-18 18:49:09 +08:00
Ivan Grokhotkov
5048d38ce7 spi slave: lock APB frequency while driver is in use 2017-10-18 14:37:21 +08:00
Ivan Grokhotkov
e4616588b7 spi master: lock APB frequency while in transaction 2017-10-18 14:19:21 +08:00
Ivan Grokhotkov
330b6bd668 sdmmc: lock APB frequency while in transaction 2017-10-18 14:19:20 +08:00
Ivan Grokhotkov
fba9678c56 uart: add support for REF_TICK 2017-10-18 14:19:20 +08:00
Gabriel Carstoiu
8128bb95ef fix(spi_slave): enable DMA clock when initialization.
merging in the code updates to the SPI master code done in commit b834fcf78a.

TW#15670, Closes #1027
2017-10-17 12:20:40 +08:00
michael
88f602a0e0 fix(periph_ctrl): fix reset function in periph_ctrl.c 2017-10-17 12:20:40 +08:00
michael
8e31a36562 feat(spi_slave): append trans_len field in trans_desc to show length actually transferred. 2017-10-17 12:01:12 +08:00
Ivan Grokhotkov
edb212986f Merge branch 'bugfix/sd_card_fixes' into 'master'
SD card fixes

See merge request !1393
2017-10-17 04:45:24 +08:00
Angus Gratton
0a52dbccca Merge branch 'bugfix/spi_reset_race' into 'master'
periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround

See merge request !1349
2017-10-13 08:51:36 +08:00
Ivan Grokhotkov
3cf23ff77d sdmmc: allow command timeouts to be configured
Previously the timeout was set to the same value (1000ms) for all kinds
of commands. In some cases, such as with slow cards, write commands
failed to complete in time.
This change makes command timeouts configurable via sdmmc_host_t
structure, and also makes default timeouts different for ordinary
commands and write commands.

Closes https://github.com/espressif/esp-idf/issues/1093

Ref TW15774.
2017-10-13 08:16:07 +08:00
Jiang Jiang Jian
8e47c355fa Merge branch 'feature/i2s_apll' into 'master'
driver/i2s: add support apll clock

See merge request !1115
2017-10-12 19:06:50 +08:00
Jiang Jiang Jian
e0922c9564 Merge branch 'bugfix/i2s_set_pin_valid_gpio' into 'master'
change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin

See merge request !764
2017-10-12 18:21:25 +08:00
Jiang Jiang Jian
da247c2cf8 Merge branch 'bugfix/ledc_duty_type_change' into 'master'
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t

See merge request !752
2017-10-12 18:18:33 +08:00
Jeroen Domburg
a8131b14b0 Merge branch 'feature/docs_update_uart_api' into 'master'
Updated functional overview of UART API documentation

See merge request !1328
2017-10-10 14:06:08 +08:00
Jeroen Domburg
1835c3a213 Merge branch 'feature/docs_update_pcnt_api' into 'master'
Extended description of the Pulse Counter API and removed redundant comments from the example

See merge request !1312
2017-10-10 14:06:03 +08:00
krzychb
9107b47deb Updated UART API documentation and examples. Included a fix of #1091 from GitHub 2017-10-10 05:54:36 +02:00
Tuan PM
9d39881981 i2s: add support apll clock
using apll_param to setup APLL

new apll calculation method, much faster

validate freq calculation

Ensure that the i2s frequency is greater than the hardware limit

Add description of how to calculate apll clock, support apll for other 16-bits audio, check rev0 chip

correct space
2017-10-06 15:36:24 +07:00
Angus Gratton
0dd9b899b7 periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround
Also refactor use of direct clock access in unit test ref_clock (probably not a real issue)
2017-10-02 17:48:16 +11:00
michael
fcd0f52e21 test(spi_master): add test case for 3 DMA issues with internal connection by gpio mux.
3 issues are:
1. RX buffer not aligned (start and end)
2. not setting rx_buffer
3. setting rx_length != length

also add spi release code here.
2017-09-27 10:44:28 +08:00
krzychb
e69691427c Extended description of the Pulse Counter API and removed redundant comments from the example 2017-09-26 22:44:46 +02:00
krzychb
b5e4c76bfe Updated sigma delta API documenation and example 2017-09-25 21:31:09 +02:00
Ivan Grokhotkov
64d1f947ed driver/rtc: fix copy-paste error in HOLD_FORCE field name for GPIO26
This error prevented EXT1 wakeup using GPIO26 from working.
2017-09-21 12:26:03 +08:00
Simon Werner
45ad0cdda2 Improved uart_flush() documentation.
Improved `uart_flush()` documentation based on this discussion: https://esp32.com/viewtopic.php?f=13&t=2804&p=13377&hilit=uart_flush#p13373

Merges https://github.com/espressif/esp-idf/pull/970
2017-09-20 12:09:44 +10:00
Wangjialin
449f9e10a3 bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9. 2017-09-19 20:10:39 +08:00
michael
1b91cb7be0 fix(sdspi): fix issues causing the sdspi driver to work low efficiently with DMA. 2017-09-19 19:00:47 +08:00
michael
074f36afff fix(spi_master): fix the heap corruption bug that RX DMA writes over the temporary buffer boundary.
TW#15434

Closes #994.
2017-09-19 16:47:14 +08:00
Kewal Shah
379320bdb2 change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin 2017-09-14 13:33:39 +08:00
Wangjialin
2fceec4d85 feature(I2S-ADC): add ADC mode for I2S.
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Kewal Shah
c4f15a0e5d ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t 2017-09-13 01:43:42 +08:00
Ivan Grokhotkov
23f10e1a57 Merge branch 'feature/uart_software_flow_control' into 'master'
uart: Add api call to switch on hardware support for 'software' flow control. (github #890)

See merge request !1215
2017-09-12 12:11:11 +08:00
Ivan Grokhotkov
de038f502c Merge branch 'feature/gpio_channel_macro' into 'master'
feat(global): add macros for GPIO->channel lookup

See merge request !1170
2017-09-11 12:15:08 +08:00
Ivan Grokhotkov
e12967297d Merge branch 'feature/docs_touch_pad_api' into 'master'
Touch Pad driver overview

See merge request !1195
2017-09-08 11:55:27 +08:00
Ivan Grokhotkov
3c470e7c43 Merge branch 'bugfix/rmt' into 'master'
RMT 2 fixes: Rename one API and specify wait_time in another API

See merge request !896
2017-09-07 18:03:08 +08:00
michael
08b9fbc242 feat(global): add macros for GPIO->channel lookup
including: macros for dac, adc, touch, rtc_gpio, uart and clk_out.

TW#13970
2017-09-07 10:40:25 +08:00
Alex Burr
93cc3a77cb uart: Add api call to switch on hardware support for 'software' flow control.
Cherry-picks https://github.com/espressif/esp-idf/pull/890
2017-09-05 16:30:21 +10:00
krzychb
ba42c46cb3 Touch Pad driver overview 2017-09-05 08:28:44 +02:00
Ivan Grokhotkov
b38186dc43 sdmmc: use periph_ctrl to enable peripheral when initializing the host 2017-09-04 22:43:52 +08:00
Ivan Grokhotkov
956a28a95c driver: add periph_ctrl support for SDMMC, SDIO slave, CAN, EMAC 2017-09-04 22:43:51 +08:00
michael
b834fcf78a fix(spi_master): this fix the SPI MOSI output missing bug. 2017-09-04 22:43:51 +08:00
Jeroen Domburg
fe140fe347 Fix off-by-one in 5MBaud arg checking; propagate errors better 2017-09-01 12:15:28 +08:00
Ivan Grokhotkov
1cfe96b1d7 Merge branch 'bugfix/i2s_dac_channel' into 'master'
fix(i2s_dac): fix the disable function which only disables DAC_CHANNEL_1.

See merge request !1169
2017-08-31 10:45:30 +08:00
Ivan Grokhotkov
b4857fc159 Merge branch 'bugfix/memory_issues_pr838' into 'master'
vfat, i2s, mdns: Fix two memory leaks, one double free (github #838)

See merge request !1173
2017-08-31 10:45:19 +08:00
Angus Gratton
96f9ae3e30 Merge branch 'bugfix/minor_prs_github' into 'master'
Minor bugfixes and corrections from github

See merge request !1181
2017-08-31 07:11:30 +08:00
Angus Gratton
4f812eb29c Remove redundant code line from uart.c
Merges part of https://github.com/espressif/esp-idf/pull/650
2017-08-30 17:55:00 +10:00
Simon Werner
c8d8fb58e7 Fixed incorrect value in comments for GPIO_NUM_33.
Merges https://github.com/espressif/esp-idf/pull/676
2017-08-30 17:55:00 +10:00
Henrik Maier
95fe7929c0 Fix spinlock bug for uart_set_rts and uart_set_dtr
Merges https://github.com/espressif/esp-idf/pull/649
2017-08-30 15:32:23 +10:00
Quentin Thérond
36eccee213 i2s: fix leak in i2s_create_dma_queue if we have a malloc issue. 2017-08-30 12:11:03 +10:00
Darian Leung
88b05f9391 esp_adc_cal: Added ADC calibration component
Added component containg API that is able to correct raw ADC readings
into a voltage in mV. Also provided a helper function that combines
the process of getting the raw ADC1 reading then converting it to a
voltage in mV. In doing so, the adc1_get_voltage() function of the ADC
driver has been deprecated. Instead there is now adc1_get_raw to obtain
the raw ADC1 reading, and adc1_to_voltage() that gets the raw reading
and converts all in one function. Functions using the deprecated
adc1_get_voltage() have also been updated to use adc1_get_raw().

Conversion is based on ADC characteristics. The characteristics are based
on the ADC's v_ref, herefore the appropriate structure and functions have
been provided to obtain the ADC characteristics.

The existing ADC driver has also been modified by adding a function to
route the internal ADC reference voltage to a GPIO allowing users to measure
it manually.

Relevant documentation has also been updated
2017-08-29 18:43:14 +08:00
michael
9ec3757349 fix(i2s_dac): fix the disable function which only disables DAC_CHANNEL_1. 2017-08-29 15:31:39 +08:00
Jeroen Domburg
edbeee8326 Merge branch 'bugfix/spi_def_typo_lsbfirst' into 'master'
bugfix(spi_master): fix the definition of ``SPI_DEVICE_BIT_LSBFIRST``.

See merge request !1154
2017-08-29 11:24:31 +08:00
Ivan Grokhotkov
3161854efb Merge branch 'bugfix/spi_hd_rx' into 'master'
fix(spi_dma_rx): add check to avoid using SPI half-duplex mode DMA with both MOSI and MISO phases.

See merge request !1111
2017-08-28 17:36:58 +08:00
Ivan Grokhotkov
b636f81619 Merge branch 'bugfix/spi_command' into 'master'
fix(spi_master): fix the command field to make it more intuitive to use.

See merge request !1119
2017-08-28 10:29:56 +08:00
michael
0cb14f1648 fix(spi_dma_rx): add check to avoid using SPI half-duplex mode DMA with both MOSI and MISO phases. 2017-08-26 02:15:30 +08:00
michael
dd1e6ea296 typo(spi_master): fix the definition of `SPI_DEVICE_BIT_LSBFIRST`.
also fix the documentation of spi_device_transmit.
2017-08-26 02:04:37 +08:00
Wang Jia Lin
f1ecffb46c Merge branch 'bugfix/touch_pad_driver' into 'master'
driver(touch): fix bug and add more features

See merge request !1056
2017-08-23 19:12:39 +08:00
Ivan Grokhotkov
2861f3e88e Merge branch 'bugfix/spi_dma_align' into 'master'
fix(spi_dma): fix the receive error with RX DMA start with non-aligned address.

See merge request !1112
2017-08-22 23:39:53 +08:00
Wangjialin
842caaab21 driver(touch): fix bug and add more features
1. add sens_struct.h
2. add definition of RTCCNTL and RTCIO
3. modify touch pad examples
4. update example code.
5. add comments add option in menuconfig
6. fix issue that pad index 8 and 9 are mismatched
7. add touch_pad_read_filtered() api to get value filtered by iir filter
8. modify touch pad isr func
9. Make the items in perihperal.ld in the sequence of address
10. delete Kconfig for touch pad
11. add touchpad filter APIs to adjust the filter
12. add touch_pad into index.rst
13. add touch_pad in Doxyfile
14. add touch_pad.rst
2017-08-22 21:21:39 +08:00
michael
4c9754726f fix(spi_master): fix the command field to make it more intuitive to use. 2017-08-21 20:37:57 +08:00
michael
a01db5569c fix(spi_dma): fix the receive error with RX DMA start with non-aligned address. 2017-08-18 10:14:49 +08:00
Ivan Grokhotkov
6baf8195ee sdmmc: add support for high speed (HS) mode
By default SD cards are initialized in default speed (DS) mode. Enabling
HS mode requires SWITCH_FUNC command to be sent twice: first time to
query if the card supports switching to HS mode, second time to perform
the switch.

This change implements SWITCH_FUNC command and adds the procedure to
switch to HS mode.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
f908425b13 sdmmc: introduce is_app_cmd flag, check it along with opcode
‘make_hw_cmd’ function checks opcodes in a few cases. Comparing opcode
does not tell the whole story, because for some SD commands there is are
APP commands with the same opcodes. This change introduces a flag which
indicates whether the next command is going to be an APP command.
The check for APP_SET_BUS_WIDTH command is updated to use this flag.
This fixes a bug with an unexpected STOP_TRANSMISSION command sent after
SWITCH_FUNC command, which has opcode 6, same as APP_SET_BUS_WIDTH.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
e6258ac6cb sdmmc: don’t flip word order in MMC_RSP_BITS
MMC_RSP_BITS helper function had a hack that it flipped word order in
the response, assuming that response size is 4 words. This hack does not
work for responses which are not 4 words long (such as the SWITCH_FUNC
response, which is 64 words long).

This change removes the hack and the matching word order reversal code
in sdmmc driver.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
159a2d01d1 Merge branch 'bugfix/spi_dma' into 'master'
bugfix(spi_master): fix several issues when using RX DMA

See merge request !1006
2017-08-16 18:55:25 +08:00
Nilay Sheth
0eb59844bb bugfix(driver): fix RMT issues from github
1. Rename api from rmt_get_ringbuf_handler to rmt_get_ringbuf_handle (Github Issue #274)
2. doxygen param rename
3. change API rmt_wait_tx_done to specify maximum waiting time
4.Change return type of rmt_wait_tx_done API from bool to esp_err_t
5. update doc
2017-08-15 17:23:51 +08:00
michael
ed1d084aea fix(spi_master): make the address field more intuitive to use.
The address field should be placed at the highest bits of address and slv_wr_status registers. Instead of breaking the address into two parts and fill in each register, move the address to the highest bits and write to the registers respectively.

Breaking change: if you fill-in the SPI address filed in a previous version in some way and it works correctly, you still have to rewrite the address, in a more intuitive way.
2017-08-15 14:49:31 +08:00
michael
366e4397e9 fix(spi_dma_rx): fixed the invalid argument issue in full-duplex mode.
force rxlength=length and mosi=1 and inlink.start=1 on in full-duplex mode.
set rxlength > length is forbidden in full-duplex mode.

TW#12609, TW#14240, https://www.esp32.com/viewtopic.php?f=13&t=2519
2017-08-14 17:25:30 +08:00
michael
227b011f6a fix(spi_master): fix SPI master, now able to transfer more than 32 bytes in non-DMA-accessable area.
apply for internal space to hold these data.
use DMA when it's enabled, no matter long or short.

TW#12226, github#551
2017-08-14 17:19:57 +08:00
Angus Gratton
8f44efc619 Merge branch 'bugfix/ledc_fade_divided_by_zero' into 'master'
bugfix(ledc): fix integer divided by zero in function ledc_set_fade_with_time

See merge request !1048
2017-08-14 13:52:36 +08:00
Ivan Grokhotkov
b260f6cb25 Merge branch 'bugfix/sdmmc_unaligned_write' into 'master'
sdmmc: fix reads/writes to/from unaligned buffers

See merge request !1071
2017-08-08 02:55:13 +08:00
Ivan Grokhotkov
dfda0fa67b Merge branch 'feature/add_gpio_drive_capability' into 'master'
feature(gpio): add APIs to set and get pad drive capability.

See merge request !1010
2017-08-07 17:21:42 +08:00
Ivan Grokhotkov
512898edee sdmmc: fix reads/writes to/from unaligned buffers
SDMMC hardware treats all buffers as aligned, and ignores 2 LSBs of
addresses written into DMA descriptors. Previously SDMMC host driver
assumed that data buffers passed from SDDMC command layer would be
aligned. However alignment checks were never implemented in the command
layer, as were the checks that the buffer coming from the application
would be in DMA capable memory. Most of the time this was indeed true.
However in some cases FATFS library can pass buffers offset by 2 bytes
from word boundary. “DMA capable” restriction may be broken if pSRAM
support is used.

This change adds buffer checks to the SDMMC host driver (alignment and
DMA capability), so that the host layer will error out for incompatible
buffers. In SDMMC command layer, a check is added to read and write
functions. If an incompatible buffer is passed from the application, new
buffer (512 bytes size) is allocated, and the transfer is performed
using {READ,WRITE}_SINGLE_BLOCK commands.
2017-08-01 03:15:11 +08:00
Jeroen Domburg
9314bf0d37 Merge branch 'bugfix/spi_change_host' into 'master'
fix(spi_master): fix the bug that VSPI no respond when host changed from HSPI to VSPI, and vice versa.

See merge request !997
2017-07-31 18:33:36 +08:00
Ivan Grokhotkov
002f38fa8f Merge branch 'feature/sdspi_driver' into 'master'
SD SPI mode driver

This MR adds functionality to support SD cards connected via SPI interface.
Additionally, two bugs are fixed:
- Definition of `SPI_TRANS_MODE_DIOQIO_ADDR` in spi_master driver
- SD card probing frequency was 4000kHz instead of 400kHz as required by the standard

See merge request !727
2017-07-26 13:51:37 +08:00
qianyicheng
acec9b9d35 bugfix(ledc): fix integer divided by zero in function ledc_set_fade_with_time 2017-07-21 19:06:44 +08:00
michael
99769f0b00 fix(spi_master): fix the bug that VSPI no respond when host changed
from HSPI to VSPI, and vice versa.

fix the SPI control bits written wrong in the headers.

TW#12123, Github#477
2017-07-21 14:50:17 +08:00
Wangjialin
9d466de235 bugfix(uart): fix signal glitch on tx pin
gpio_matrix_out function will set output enable for GPIO, seems in gpio_matrix_out there will be a short moment that the chip will output GPIO level.
So we can set GPIO as high before gpio_matrix_out function.
2017-07-20 14:34:11 +08:00
Dmitry Yakovlev
e5bb45f381 driver: SD protocol driver for SPI peripheral 2017-07-20 13:43:07 +08:00
Ivan Grokhotkov
5f8785eaec sdmmc: add support for SPI protocol commands 2017-07-20 13:34:21 +08:00
Ivan Grokhotkov
3b96771feb sdmmc: fix probing clock frequency
Probing clock frequency should be 400kHz, not 4MHz.
2017-07-20 13:34:21 +08:00
Ivan Grokhotkov
54dc350907 spi_master: fix duplicate bit mask for SPI_TRANS_MODE_DIOQIO_ADDR 2017-07-20 13:34:21 +08:00
Wangjialin
c30149e4bd feature(gpio): add APIs to set and get pad drive capability. RTC pads use RTC registers to contol drive capability. 2017-07-19 11:23:41 +08:00
Ivan Grokhotkov
7fc25f18d2 Merge branch 'feature/enable_brownout_detector' into 'master'
Enable brownout detector

See merge request !811
2017-07-13 11:40:37 +08:00
Angus Gratton
8d7074ed5c soc: Move esp_ptr_dma_capable() function to soc_memory_layout.h 2017-07-10 17:46:03 +08:00
Angus Gratton
71c70cb15c heap: Refactor heap regions/capabilities out of FreeRTOS
Remove tagged heap API, rename caps_xxx to heap_caps_xxx

Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Ivan Grokhotkov
cbe23147bf driver/rtc: add support for attaching handlers to RTC_CNTL interrupts 2017-07-10 17:21:49 +08:00
Ivan Grokhotkov
1194f59e1a Merge branch 'bugfix/i2s_return_err_code' into 'master'
i2s driver: return error code if register isr error

See merge request !829
2017-07-06 11:25:40 +08:00
Wangjialin
40fd9db55d bugfix(uart): fix bugs reported from github
1. uart_set_line_inverse API issue, https://github.com/espressif/esp-idf/issues/673
2. tx buffer length issue, https://github.com/espressif/esp-idf/issues/710
2017-06-27 16:41:59 +08:00
Angus Gratton
17747b3358 gpio driver: Clear GPIO matrix output config when setting pin as input
Otherwise, if a non-GPIO peripheral has been routed to this pin
(as an output), output driver can remain enabled.
2017-06-26 12:47:08 +10:00
James Sarrett
b772024699 send bus initialization bits before MMC_GO_IDLE_STATE command to initialize card after poweron 2017-06-22 11:08:47 +08:00
krzychb
05f56d1d25 [TW#13322] Typo in documentation, fixes #694 2017-06-19 22:42:22 +02:00
Nilay
769944b067 PCNT: fix for pcnt_set_pin API, it can now use all pcnt channels 2017-06-16 11:18:00 +05:30
Nilay
f50b5481fa PCNT: Fixed pcnt_counter_clear, Pulse Count now able to resume after API call 2017-06-16 11:11:52 +05:30
Jiang Jiang Jian
aefde1517d Merge branch 'bugfix/i2c_delete_interrupt_race' into 'master'
i2c driver: When deleting, disable interrupts before freeing data structures

See merge request !836
2017-06-14 17:47:22 +08:00
Tuan PM
f91715438a i2s: return error code if register isr error, resolve #587 (github)
set p_i2s_obj = NULL when return error
2017-06-13 14:28:47 +07:00
Angus Gratton
c77b699463 rmt driver: Manage driver interrupt handler based on which channels are enabled
Previously the first call to rmt_driver_uninstall() would remove the interrupt handler,
even if other channels still had the driver installed.

Adds an OS-level lock to control concurrent registration/deregistration of channels.
2017-06-09 16:11:21 +10:00