Commit graph

702 commits

Author SHA1 Message Date
kooho
64f81aefae bugfix(GPIO): Fixed the bug that GPIO enables interrupts on one core,
but registers interrupt service routines on another core

closes https://github.com/espressif/esp-idf/issues/2808
closes https://github.com/espressif/esp-idf/issues/2845
2019-07-29 11:09:07 +00:00
Michael (XIAO Xufeng)
b98b4c3886 sdmmc_io: support to print CIS information
Currently only ESP slaves can be parsed correctly.
2019-07-29 10:41:17 +08:00
David Cermak
c6c6cd7179 rtc: fix minor malloc issues found by static analyzer 2019-07-17 14:45:17 +00:00
kooho
09a63cca51 bugfix(UART): fixed two UART issues:
1. uart_wait_tx_done works incorrect when sending a byte of data.
2. uart_set_rx_timeout sets an incorrect rx timeout value when ref_tick is enabled

closes https://github.com/espressif/esp-idf/issues/3631
2019-07-08 12:27:14 +08:00
Angus Gratton
3ff01d60a4 Merge branch 'fix/sdio_slave_reset_infloop_leak' into 'master'
sdio_slave: fix the send_flush infinite loop issue

See merge request idf/esp-idf!5365
2019-07-03 08:36:26 +08:00
Vikram Dattu
da77dcb0be Changed log level for spi_master
There are lot of prints of `Allocate TX buffer for DMA`
Changed these from `ESP_LOGI` to `ESP_LOGD`

Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>
2019-07-01 20:04:15 +00:00
Ivan Grokhotkov
13d9c483b3 Merge branch 'bugfix/i2s_apll_clock_fix' into 'master'
driver/i2s: fix apll_clock_rate for different sample rates

See merge request idf/esp-idf!5159
2019-06-28 03:49:11 +08:00
Michael (XIAO Xufeng)
65c0d354e4 spi_common: add interface to get whether the bus is on IOMUX 2019-06-27 13:27:27 +08:00
Michael (XIAO Xufeng)
b76ab9142d spi_common: deprecate some public APIs 2019-06-27 13:27:26 +08:00
Michael (XIAO Xufeng)
28b2e113ca spi_master: move the spi_bus_init function into common header 2019-06-27 13:27:26 +08:00
Michael (XIAO Xufeng)
9805902482 sdio_slave: fix the send_flush infinite loop issue
Also add some helper functions.
2019-06-27 13:24:22 +08:00
Renz Christian Bagaporo
9b350f9ecc cmake: some formatting fixes
Do not include bootloader in flash target when secure boot is enabled.
Emit signing warning on all cases where signed apps are enabled (secure
boot and signed images)
Follow convention of capital letters for SECURE_BOOT_SIGNING_KEY
variable, since it is
relevant to other components, not just bootloader.
Pass signing key and verification key via config, not requiring
bootloader to know parent app dir.
Misc. variables name corrections
2019-06-21 19:53:29 +08:00
Renz Christian Bagaporo
9eccd7c082 components: use new component registration api 2019-06-21 19:53:29 +08:00
Ajita Chavan
070b86eee5 i2s: test case for variation in apll clock rate 2019-06-20 16:40:58 +00:00
redchenjs
430d9c6fba i2s: fix a bug when calculating i2s apll parameters
Closes https://github.com/espressif/esp-idf/issues/2634
Closes https://github.com/espressif/esp-idf/issues/3380
Fixes https://github.com/espressif/esp-idf/issues/3407
2019-06-20 16:40:58 +00:00
Angus Gratton
126b687c75 Merge branch 'refactor/vfs_uart_multichip_support' into 'master'
vfs_uart & uart: add multichip support

See merge request idf/esp-idf!5298
2019-06-20 18:31:24 +08:00
Angus Gratton
90008e3fd6 Merge branch 'feature/spi_driver_support_multi_chip' into 'master'
spi: multichip support

See merge request idf/esp-idf!5234
2019-06-20 16:45:06 +08:00
chenjianqiang
cf2ba210ef uart: multichip support 2019-06-20 11:32:22 +08:00
Michael (XIAO Xufeng)
5c9dc44c49 spi: multichip support
move hardcoded numbers, etc. into soc files.
create headers for shared types which needs to be documented.

(MINOR CHANGE)
2019-06-20 10:38:52 +08:00
Michael (XIAO Xufeng)
1138133a78 spi: fix a possible concurrency issue 2019-06-17 00:16:01 +00:00
David Cermak
d127849d80 can: suppress clang tidy warning about nullptr dereference 2019-06-13 16:23:20 +02:00
Angus Gratton
2331597ed2 Merge branch 'bugfix/ticks_to_wait_for_uart_and_i2c' into 'master'
driver: Fix ticks_to_wait for uart and i2c

Closes IDFGH-964

See merge request idf/esp-idf!5021
2019-06-11 08:41:44 +08:00
Konstantin Kondrashov
ed22949847 driver: Add uart and i2c UTs to check ticks_to_wait in some functions 2019-06-05 10:38:23 +08:00
Angus Gratton
045aaf6fb0 Merge branch 'feature/add_xxx_periph_h' into 'master'
soc: Add xxx_periph.h for all modules

Closes IDF-192

See merge request idf/esp-idf!4952
2019-06-04 13:24:14 +08:00
Konstantin Kondrashov
355f209dba uart: Fix ticks_to_wait when 0 or expired
Closes: https://github.com/espressif/esp-idf/issues/3301

Closes: IDFGH-964
2019-06-04 11:50:54 +08:00
Konstantin Kondrashov
22a30e2740 i2c: Fix ticks_to_wait when 0 or time expired
Closes: https://github.com/espressif/esp-idf/issues/3301

Closes: IDFGH-964
2019-06-04 11:50:54 +08:00
Konstantin Kondrashov
399d2d2605 all: Using xxx_periph.h
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .

Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-06-03 14:15:08 +08:00
lenhart
920d35b5d0 Update i2c documentation
Description for i2c_slave_read_buffer had leftover from copying from write fct. data
pointer description described the wrong way (writing into internal buffer)

Closes https://github.com/espressif/esp-idf/pull/3268
2019-05-29 18:02:18 +05:30
Oleg Antonyan
4430456b64 Change SPI_USE_RXDATA->SPI_TRANS_USE_RXDATA and SPI_USE_TXDATA->SPI_TRANS_USE_TXDATA on documentation
Closes https://github.com/espressif/esp-idf/pull/2802
2019-05-29 18:02:18 +05:30
Jeroen Domburg
0e7442bb7a Merge branch 'feature/spi_slave_support_hal' into 'master'
spi_slave: add HAL support

See merge request idf/esp-idf!4830
2019-05-22 13:42:11 +08:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
Roland Dobai
e9f1011b1b Rename Kconfig options (components/driver) 2019-05-21 09:09:01 +02:00
Michael (XIAO Xufeng)
33db6d608e spi_slave: add HAL support 2019-05-20 07:34:34 +00:00
Sachin Parekh
e6a714480d unit-test-app: freertos_compliance config added
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
5979086379 timer: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
7f37824eb7 rtc_module: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
da41885e85 rmt: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
Sachin Parekh
e9898b1280 periph_ctrl: port*_CRITICAL vanilla FreeRTOS compliance
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-05-13 16:39:19 +05:30
michael
0b523c2300 spi_master: fix the dual/quad io issue
introduced in f871cc5ffa

The issue is caused by

1. The hal didn't pass the io_mode to LL.
2. The setup_device function overwrite the trans-specific settings.
2019-04-27 01:36:47 +08:00
Angus Gratton
a20d02b7f1 Merge branch 'feature/remove_dependency_to_soc' into 'master'
global: remove dependency to soc everywhere except driver and kernel components

See merge request idf/esp-idf!4678
2019-04-18 08:08:41 +08:00
Ivan Grokhotkov
bb4f5617ab test: clean up "leaks" tags from most unit tests 2019-04-16 20:07:40 +08:00
Michael (XIAO Xufeng)
562af8f65e global: move the soc component out of the common list
This MR removes the common dependency from every IDF components to the SOC component.

Currently, in the ``idf_functions.cmake`` script, we include the header path of SOC component by default for all components.
But for better code organization (or maybe also benifits to the compiling speed), we may remove the dependency to SOC components for most components except the driver and kernel related components.

In CMAKE, we have two kinds of header visibilities (set by include path visibility):

(Assume component A --(depends on)--> B, B is the current component)

1. public (``COMPONENT_ADD_INCLUDEDIRS``): means this path is visible to other depending components (A) (visible to A and B)
2. private (``COMPONENT_PRIV_INCLUDEDIRS``): means this path is only visible to source files inside the component (visible to B only)

and we have two kinds of depending ways:

(Assume component A --(depends on)--> B --(depends on)--> C, B is the current component)

1. public (```COMPONENT_REQUIRES```): means B can access to public include path of C. All other components rely on you (A) will also be available for the public headers. (visible to A, B)
2. private (``COMPONENT_PRIV_REQUIRES``): means B can access to public include path of C, but don't propagate this relation to other components (A). (visible to B)

1. remove the common requirement in ``idf_functions.cmake``, this makes the SOC components invisible to all other components by default.
2. if a component (for example, DRIVER) really needs the dependency to SOC, add a private dependency to SOC for it.
3. some other components that don't really depends on the SOC may still meet some errors saying "can't find header soc/...", this is because it's depended component (DRIVER) incorrectly include the header of SOC in its public headers. Moving all this kind of #include into source files, or private headers
4. Fix the include requirements for some file which miss sufficient #include directives. (Previously they include some headers by the long long long header include link)

This is a breaking change. Previous code may depends on the long include chain.
You may need to include the following headers for some files after this commit:

- soc/soc.h
- soc/soc_memory_layout.h
- driver/gpio.h
- esp_sleep.h

The major broken include chain includes:

1. esp_system.h no longer includes esp_sleep.h. The latter includes driver/gpio.h and driver/touch_pad.h.
2. ets_sys.h no longer includes soc/soc.h
3. freertos/portmacro.h no longer includes soc/soc_memory_layout.h

some peripheral headers no longer includes their hw related headers, e.g. rom/gpio.h no longer includes soc/gpio_pins.h and soc/gpio_reg.h

BREAKING CHANGE
2019-04-16 13:21:15 +08:00
Angus Gratton
f871cc5ffa Merge branch 'feat/spi_hal_support' into 'master'
spi_master: refactor and add HAL support

See merge request idf/esp-idf!4159
2019-04-15 07:57:11 +08:00
Ivan Grokhotkov
7728f8755e Merge branch 'feat/example_sdio_over_spi' into 'master'
sdio: support SDIO over spi

See merge request idf/esp-idf!3069
2019-04-12 16:12:57 +08:00
Konstantin Kondrashov
5021129e71 Add support a [leaks] tag for UT 2019-04-12 09:31:23 +08:00
michael
8a364b4bdf sdmmc: support SDIO over SPI 2019-04-12 02:24:28 +08:00
Ivan Grokhotkov
7027d2dfe8 spi_master: compile as C11 due to use of stdatomic.h
stdatomic.h is available both in newlib and GCC include directories.
Normally (if you invoke the compiler without any flags) GCC include
directories are first on the list, so GCC’s stdatomic.h is used. In
IDF, we used to pass newlib include path as an extra include
directory, so newlib’s stdint.h got included instead.

Newlib 2.2.0 stdatomic implementation is compatible with -std=gnu99
but incompatible with -std=gnu11. And GCC doesn’t support atomic_load
with -std=gnu99 (it’s a C11 feature). So when we used atomic_load
with -std=gnu99, it worked due to newlib’s header.

Since we are no longer going to be including newlib headers into IDF,
GCC stdatomic will be used instead. Hence, add -std=gnu11 for source
files which use atomic features.
2019-04-10 13:48:57 +08:00
morris
f5b03c9ea3 misc adjustment of esp32 component 2019-04-03 19:57:46 +08:00
Michael (XIAO Xufeng)
af2fc96ee1 spi_master: refactor and add HAL support 2019-03-28 17:14:50 +08:00
morris
a2f07b0806 move common include files from esp32 into esp_common 2019-03-26 11:57:03 +08:00