Commit graph

45 commits

Author SHA1 Message Date
ronghulin
d62bb227b7 esp32: fix a WiFi RX bug
Support WiFi/BT MAC register writting when the WiFi/BT common clock is disabled.
2020-01-20 08:01:59 +00:00
Tian Hao
a05cc294eb fix bug that phy_enter_critical cannot effect on dual-core
Sometimes, libphy.a call phy_enter_critical() to protect accessing critical sections, such like
operating on I2C, but it may not effect when both the CPU core call it. It may cause accessing
I2C blocking and cannot recover by esp_restart(), until do HW reboot.
2019-12-09 12:52:36 +08:00
XiaXiaotian
5059c7fac3 Decouple WiFi and BT with coexist to reduce bin size
1. Do not link WiFi code when only BT or BLE is used and WiFi is not
used.

2. Do not link coexist code when CONFIG_SW_COEXIST_ENABLE is disabled.
2019-04-17 16:59:24 +08:00
wangmengyang
8de9149b11 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-14 14:56:29 +08:00
Liu Zhi Fu
1afb8001dd esp32: fix WiFi timer inaccurate bug
Fix the bug that WiFi timer is not accurate when sleep is on
2018-10-17 09:47:25 +08:00
zhangyanjiao
5425979932 when brownout reset occurs,set the phy TX Power to the lowest 2018-08-30 14:22:03 +08:00
Liu Zhi Fu
fc72d53c71 esp32: fix the bug that the first two reboots do full calibration
If the NVS is erased, the first two reboots will do full calibration.
This commit is to fix this issue and only need to do full calibration once.
2018-06-12 15:51:51 +08:00
Liu Zhi Fu
4afa5d0d29 esp32/wpa_supplicant: fix some bugs introduced by wifi os adapter
1. Fix the WiFi/BT coexist bug
2. Fix WPA2 enterprise example crash bug
3. Add size and version check for crypto type struct
4. Add MD5 check for crypto type header file
2018-05-31 17:09:40 +08:00
XiaXiaotian
b32b93a607 Add OS adapter to WiFi driver
1.add os adapter to wifi driver
2.type of encrypt funcs not correct
2018-05-26 17:22:23 +08:00
Liu Zhi Fu
67424816cc esp32: some changes relating to phy v3900
1. Store the calibration data to NVS if PHY does full calibration because of calibration data checksum failure
2. Pass the station's mac to PHY for checksum calculation
2018-05-22 14:16:09 +08:00
Liu Zhi Fu
402dee17a1 esp32: fix potential PHY calibration bug
1. Add error log if failed to store calibration version/mac/data
2. Change the NVS calibration version/mac/data store sequence
3. Pass the init_data instead of NULL to esp_phy_rf_init() in esp_phy_load_cal_and_init()
2018-05-03 15:48:14 +08:00
Tian Hao
1bde34c1f1 component/esp32 : remove pm gpio dbg 2018-04-09 14:33:48 +08:00
Tian Hao
58e7464dc0 component/esp32 : clear some minor thingsw about PM and coexistence 2018-04-03 20:13:49 +08:00
island
9b7454de0c support wifi&bt coexist (v0.9.1)
1. refactor wifi modem sleep
2. refactor wifi and bt phy enable/diable coexistence
3. support wifi&bt coexist (v0.9.1)
3. add coex pause resume
4. fix bt library interrupt reaction slowly
5. make a2dp more smooth when coex
6. add coexist preference option
7. Make CI do not check libcoexist.a printf/ets_printf
8. disable Wifi RX AMPDU when software coexistence enable && update wifi lib
9. bluetooth call modem sleep api
2018-04-02 13:44:48 +08:00
wangmengyang
95af1c22b5 components/phy: add IRAM_ATTR attribute to the two APIs used in phy calibration
1. the two APIs used in phy calibration are called in bluetooth baseband ISR, so locate the them in IRAM
2018-01-26 17:12:59 +08:00
XiaXiaotian
1bc87e972b Added two functions in PHY API for disable interrupts and add rfcal data checking to PHY 2018-01-25 17:58:14 +08:00
Jack
11c0daef62 Fix bug that when we do full calibration init data bin is not used 2018-01-09 15:31:34 +08:00
XiaXiaotian
42cefc173f refractor WiFi clock setting
Do not set WiFi clock in PHY initializing function, move it to WiFi
   start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92 component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
Kedar Sovani
ba8cd58b08 kconfig: Remove Wi-Fi on/off as a menuconfig option
This is no longer required since the functions automatically get
pulled in based on the usage. A quick summary of footprint
comparisions before and after these set of patches is shown below:

Hello-World: (simplified for readability)
 old Total image size:~ 104902 bytes (.bin may be padded larger)
 old Total image size:~ 105254 bytes (.bin may be padded larger)
 Per-archive contributions to ELF file:
             Archive File DRAM .data & .bss   IRAM Flash code & rodata   Total
 old              libesp32.a       1973    177   4445       3939     2267   12801
 new              libesp32.a       1973    185   4473       3939     2267   12837

 new             libnvs_flash.a          0     92      0        274        8     374
 new             libstdc++.a          0      0      0         24        0      24

For some reason, nvs_flash.a (~400bytes) gets pulled in (particularly
the nvs_flash_init() function).

Power-Save: (simplified for readability)
 old Total image size:~ 421347 bytes (.bin may be padded larger)
 old Total image size:~ 421235 bytes (.bin may be padded larger)

 old      libtcpip_adapter.a          0     81      0       1947      115       2143
 new      libtcpip_adapter.a          0     69      0       1897      115       2081

The size actually shrinks a bit, since the AP interface function
doesn't get pulled in.
2017-08-16 15:55:28 +05:30
Ivan Grokhotkov
979fce0df5 bt: call nvs_flash_init in examples, show error if NVS is not initialized
NVS is used to store PHY calibration data, WiFi configuration, and BT
configuration. Previously BT examples did not call nvs_flash_init,
relying on the fact that it is called during PHY init. However PHY init
did not handle possible NVS initialization errors.

This change moves PHY init procedure into the application, and adds
diagnostic messages to BT config management routines if NVS is not
initialized.
2017-07-17 21:29:50 +08:00
Ivan Grokhotkov
ef63811e6d phy_init: fix log level for "PHY data partition validated" message 2017-07-05 11:29:53 +08:00
Tian Hao
bb4a87dbfe component/esp32 : fix phy init with NULL init_data
1. fix phy init with NULL init_data
2. do full calibration without CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE
3. fix libphy.a printf
2017-06-16 12:09:13 +08:00
Ivan Grokhotkov
c742f7d860 Merge branch 'feature/base_mac_address' into 'master'
Optimize configuration of base MAC address

Application developer can call APIs to configure base MAC address
instead of using menuconfig.

See merge request !744
2017-05-11 12:01:51 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Tian Hao
26a3cb93c7 component/soc : move dport access header files to soc
1. move dport access header files to soc
2. reduce dport register write protection. Only protect read operation
2017-05-09 18:06:00 +08:00
Tian Hao
f7e8856520 component/esp32 : fix dualcore bug
1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.
2017-05-08 21:53:43 +08:00
Ivan Grokhotkov
7ee8ee8b7e soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
Jiang Jiang Jian
8ee6f8227e Merge branch 'bugfix/reset_mac_cause_bt_cannot_rx_data' into 'master'
Reset WIFI mac when wifi start and update wifi lib

1. reset wifi mac when wifi start

2. roll back rx hung workaround for beacon timeout

3. fix amsdu ap interface wrong issue

4. fix amsdu header parse error

5. fix amsdu flag wrong issue

6. PHY: V350, fix BT rssi bug

7. RTC: V225, fix bt will be not work when wifi is reset

See merge request !606
2017-03-24 17:02:26 +08:00
XiaXiaotian
6181c39f05 Reset WIFI mac when wifi start and update wifi lib
1. reset wifi mac when wifi start

2. roll back rx hung workaround for beacon timeout

3. fix amsdu ap interface wrong issue

4. fix amsdu header parse error

5. fix amsdu flag wrong issue

6. PHY: V350, fix BT rssi bug

7. RTC: V225, fix bt will be not work when wifi is reset
2017-03-23 14:28:27 +08:00
Ivan Grokhotkov
94b9898ca7 phy_init: move NVS init into relevant function, check errors
This change also modifies logging statements to print hexadecimal error codes, which are easier to look up.
2017-03-14 22:03:39 +08:00
Angus Gratton
4d67a2ba8b esp32 phy_init: Move DPORT Wifi clock masks to macro values
Amended fix for c642079 !534
2017-03-01 12:11:57 +11:00
XiaXiaotian
f36c909528 update phy and rtc lib
1. RTC V214: modify APLL function for the chip of ECO version.

2. Add API phy_close_rf() and use it in esp_phy_deinit() instead of pm_close_rf().

3. RTC V213: fix BT will not work when BT-init is called more than once.
2017-02-27 19:54:22 +08:00
XiaXiaotian
c6420792f2 1. Do not disable clock for generating random number.
2. And fix the bug that system crashes if call esp_wifi_stop() twice.
2017-02-27 16:48:04 +08:00
XiaXiaotian
bb0298bc71 coexist: enable coexist when wifi&bt are enabled, disable coexist when one of wifi&bt is disabled. 2017-02-20 23:53:25 +08:00
XiaXiaotian
770c2ade05 phy init: modify some comments 2017-02-20 10:44:40 +08:00
Tian Hao
4bd5b0c91a component/bt : add bt enable/disable for power save
1. add new APIs bt controller enable/disab/deinit
2. make bt controller work need to call two APIs of esp_bt_controller_init and enable
3. modify phy init to make mac reset once
2017-02-17 19:24:58 +08:00
XiaXiaotian
cd13c9e95d disable phy and rf
1. add a macro in menuconfig for users to choose whether store phy calibration data into NVS or not.

2. rename some disable phy and rf APIs so that existing code which calls old APIS will fail to compile.
2017-02-17 10:24:55 +08:00
XiaXiaotian
eb14284c92 disable PHY and RF when stop WiFi and disable BT
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
Angus Gratton
9a8a82e857 phyinit: Use PHY config to enable, don't need phy_get_romfunc_addr to init 2017-01-19 11:18:44 +11:00
Ivan Grokhotkov
f20135af54 esp32: compile PHY-related code only when WiFi is enabled
Fixes https://github.com/espressif/esp-idf/issues/230, https://github.com/espressif/esp-idf/issues/237
2017-01-16 02:38:32 +08:00
shangke
0e701e1cac ethernet: support flow control 2017-01-10 15:19:18 +08:00
Ivan Grokhotkov
df6edb50e9 implement esp_deep_sleep, fix build issues 2016-11-22 21:54:49 +08:00
Ivan Grokhotkov
541b142654 phy_init: reduce the amount of hardwired logic, add coexist init 2016-11-18 20:11:17 +08:00
Ivan Grokhotkov
4db29f74a0 add PHY init support 2016-11-18 20:11:16 +08:00