Commit graph

35 commits

Author SHA1 Message Date
xiongyu
96a5e34d7a bugfix(driver): fix i2s and timergroup some issues
* fix i2s and timergroup dev array used by isr crash issue

* Closes IDFGH-2432

* Closes https://github.com/espressif/esp-idf/issues/4545

* fix i2s adc data inv issue

* Closes IDFGH-2444

* Closes https://github.com/espressif/esp-idf/issues/4557
2019-12-31 11:02:35 +08:00
Angus Gratton
b01036e13e driver: Remove features deprecated pre-IDF V4.0 2019-09-19 18:47:15 +10:00
Konstantin Kondrashov
3b0b5f92a7 i2s/driver: Add module reset before enabling 2019-09-06 11:34:53 +08:00
Ajita Chavan
070b86eee5 i2s: test case for variation in apll clock rate 2019-06-20 16:40:58 +00:00
redchenjs
430d9c6fba i2s: fix a bug when calculating i2s apll parameters
Closes https://github.com/espressif/esp-idf/issues/2634
Closes https://github.com/espressif/esp-idf/issues/3380
Fixes https://github.com/espressif/esp-idf/issues/3407
2019-06-20 16:40:58 +00:00
Konstantin Kondrashov
399d2d2605 all: Using xxx_periph.h
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .

Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-06-03 14:15:08 +08:00
morris
f5b03c9ea3 misc adjustment of esp32 component 2019-04-03 19:57:46 +08:00
morris
c159984264 separate rom from esp32 component to esp_rom
1. separate rom include files and linkscript to esp_rom
2. modefiy "include rom/xxx.h" to "include esp32/rom/xxx.h"
3. Forward compatible
4. update mqtt
2019-03-21 18:51:45 +08:00
Sachin Parekh
4de5ae7468 PM: I2S and I2C added in the Power Management docs
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-03-18 08:21:21 +00:00
Sachin Parekh
7fc6445035 I2S: Enable Power Management locks
Acquires PM_APB_FREQ_MAX lock when carrying any transaction on I2S if
Power Management Framework is enabled.

Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2019-03-18 08:21:21 +00:00
Angus Gratton
280d39aedd Merge branch 'bugfix/i2s_pdm_adc_use_apll' into 'master'
bugfix(i2s): allow to use apll in pdm/adc/dac mode

See merge request idf/esp-idf!3800
2019-02-26 11:47:49 +08:00
Wangjialin
4b34ae1258 bugfix(i2s): allow to use apll in pdm/adc/dac mode
1. Allow to use apll in pdm mode
2. Add clock frequency configuration for PDM mode
3. Allow to use apll in ADC/DAC mode
2018-11-27 18:41:20 +08:00
Mahavir Jain
765bf674d0 i2s: add (optional) support to clear tx descriptor in underflow case
It has been observed that, in case of underflow (data unavailability) in
I2S transmission, previously filled up tx descriptors continue to get
transmitted on line, causing noise in case of audio use case.

This change adds optional `tx_desc_auto_clear` field during I2S driver intialization
than can zero initialize tx descriptor in case of underflow situation in
interrupt handler itself.

Closes: https://github.com/espressif/esp-idf/issues/1789
2018-11-23 14:31:09 +05:30
Zhang Zhao Xiang
9deb58859c fix i2s mix result and error code 2018-05-17 10:59:04 +08:00
Mahavir Jain
b2a1a79eb4 i2s: fix issue in dma descriptor allocation if SPIRAM is enabled
It has been observed that, if external SPIRAM is enabled, then under
certain scenarios (e.g. internal memory being too much fragmented),
I2S tx/rx descriptors can land in external SPIRAM and hence resulting
in failure in DMA. Adding explicit capability to allocate in only DMA
capable memory.

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-05-10 18:26:01 +05:30
Zhang Zhao Xiang
f48ecb8613 Add a new i2s feature to expand the original i2s width 2018-03-22 18:52:55 +08:00
Angus Gratton
63ddae5087 Merge branch 'bugfix/i2s_driver' into 'master'
i2s: add support fixed_mclk configuration

See merge request idf/esp-idf!1600
2018-02-22 12:03:26 +08:00
Tuan PM
7cda34c626 i2s: add support fixed_mclk configuration 2018-02-22 09:00:23 +07:00
h3ndrik
dcc466a673 i2s: fix type mismatch of intr_alloc_flags
Merges https://github.com/espressif/esp-idf/pull/1589
2018-02-16 16:20:12 +11:00
Wangjialin
451f69cc2e driver(i2s): fix broken i2s adc mode
1. Move i2s reset code from i2s_stop to i2s_start.
2. add RTC API to set sw mode for ADC
3. add description for adc_power_always_on()
4. add lock for i2s dma and RTC ADC functions.
5. add ADC read task in example

reported from bbs:  https://esp32.com/viewtopic.php?f=13&t=3490&p=17522#p17522
reported from github: https://github.com/espressif/esp-idf/issues/1333
2018-02-07 17:17:20 +08:00
Ivan Grokhotkov
f039aac1e5 Merge branch 'bugfix/i2s_bck_polariy' into 'master'
bugfix(i2s): fix bck polarity issue when using pll clock.

See merge request !1428
2017-10-22 12:36:27 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Wangjialin
a84db78eb1 bugfix(i2s): fix bck polarity issue when using pll clock.
reported from github: https://github.com/espressif/esp-idf/issues/1119

Digital team think it is due to the decimal divider.
We can reset the i2s tx and rx when calling i2s_stop to avoid this.
2017-10-19 23:23:01 +08:00
Jiang Jiang Jian
8e47c355fa Merge branch 'feature/i2s_apll' into 'master'
driver/i2s: add support apll clock

See merge request !1115
2017-10-12 19:06:50 +08:00
Tuan PM
9d39881981 i2s: add support apll clock
using apll_param to setup APLL

new apll calculation method, much faster

validate freq calculation

Ensure that the i2s frequency is greater than the hardware limit

Add description of how to calculate apll clock, support apll for other 16-bits audio, check rev0 chip

correct space
2017-10-06 15:36:24 +07:00
Kewal Shah
379320bdb2 change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin 2017-09-14 13:33:39 +08:00
Wangjialin
2fceec4d85 feature(I2S-ADC): add ADC mode for I2S.
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Ivan Grokhotkov
1cfe96b1d7 Merge branch 'bugfix/i2s_dac_channel' into 'master'
fix(i2s_dac): fix the disable function which only disables DAC_CHANNEL_1.

See merge request !1169
2017-08-31 10:45:30 +08:00
Quentin Thérond
36eccee213 i2s: fix leak in i2s_create_dma_queue if we have a malloc issue. 2017-08-30 12:11:03 +10:00
michael
9ec3757349 fix(i2s_dac): fix the disable function which only disables DAC_CHANNEL_1. 2017-08-29 15:31:39 +08:00
Tuan PM
f91715438a i2s: return error code if register isr error, resolve #587 (github)
set p_i2s_obj = NULL when return error
2017-06-13 14:28:47 +07:00
Wangjialin
f68c5baea6 bugfix(i2s): fix error when changing changel number in i2s_set_clk function 2017-05-23 19:32:10 +08:00
Wangjialin
1f055d28b8 Driver update: I2S pdm and built-in DAC
1. Modify I2S DAC built-in mode settings
2. Add I2S pdm mode
3. Correct I2S signal index in full-duplex mode
4. Modify dac output function
5. Add dac pad init functions
6. Modify DAC documentation
7. Add i2s_set_dac_mode API
2017-05-12 16:21:02 +08:00
Tuan PM
fc1ee2666a I2S: fixed support for 24 and 32-bits, fixed tx/rx at the same time and others in log:
Add support 24, 32 bits

@jxmao optimize i2s_zero_buffer

@jxmao correct config support slave mode

@jxmao correct setup pin support tx/rx at the same time

Enhance pin power

@jxmao add dynamic change number of channels

remove nvs_init

remove start log and enhance power pin setup

using enum for i2s_channel and i2s_bits_per_sample, return ESP_ERR_INVALID_ARG when check params

validate i2s_bits_per_sample and channel

check tx & rx buffer before fill zero

remove checking channel as @jxmao suggest

limit dma buffer

modify i2s pin back to gpio mux before configure gpio matrix, resolve github issue #512

Add support 24, 32 bits

reduce push function

Modify sample can test with 24, 32-bits

Add i2s sample README

Fixed i2s_set_clk got reset sometime

can changes bit-wide while running

Fix sample rate calculation for DAC mode from @jeroen

modify example can change bits per sample every 5 seconds

cleanup

add comment for bytes_per_sample

update as @angus suggestions

Add i2s_set_clk api

I2S driver bug fixed as following log:

@jxmao optimize i2s_zero_buffer

@jxmao correct config support slave mode

@jxmao correct setup pin support tx/rx at the same time

Enhance pin power

@jxmao add dynamic change number of channels

remove nvs_init

remove start log and enhance power pin setup

using enum for i2s_channel and i2s_bits_per_sample, return ESP_ERR_INVALID_ARG when check params

validate i2s_bits_per_sample and channel

check tx & rx buffer before fill zero

remove checking channel as @jxmao suggest

limit dma buffer

modify i2s pin back to gpio mux before configure gpio matrix, resolve github issue #512

limit dma buffer to 4092

change gpio_matrix_*_check to inline function, remove some comments and rename test_i2s function to setup_triangle_sine_waves

for change commit title
2017-04-27 10:00:10 +07:00
Tuan PM
5462d98e5a Add i2s driver 2016-12-29 17:29:14 +08:00