OVMS3-idf/components/driver/rtc_module.c

2383 lines
83 KiB
C
Raw Normal View History

// Copyright 2016-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <esp_types.h>
#include <stdlib.h>
#include <ctype.h>
#include "esp_log.h"
#include "soc/rtc_periph.h"
#include "soc/sens_periph.h"
#include "soc/syscon_periph.h"
#include "soc/rtc.h"
#include "soc/periph_defs.h"
#include "rtc_io.h"
#include "touch_pad.h"
#include "adc.h"
#include "dac.h"
#include "freertos/FreeRTOS.h"
#include "freertos/xtensa_api.h"
#include "freertos/semphr.h"
#include "freertos/timers.h"
#include "esp_intr_alloc.h"
#include "sys/lock.h"
#include "driver/rtc_cntl.h"
#include "driver/gpio.h"
#include "adc1_i2s_private.h"
#include "sdkconfig.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/rom/ets_sys.h"
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#include "esp32s2beta/rom/ets_sys.h"
#endif
#ifndef NDEBUG
// Enable built-in checks in queue.h in debug builds
#define INVARIANTS
#endif
#include "sys/queue.h"
#define ADC_FSM_RSTB_WAIT_DEFAULT (8)
#define ADC_FSM_START_WAIT_DEFAULT (5)
#define ADC_FSM_STANDBY_WAIT_DEFAULT (100)
#define ADC_FSM_TIME_KEEP (-1)
#define ADC_MAX_MEAS_NUM_DEFAULT (255)
#define ADC_MEAS_NUM_LIM_DEFAULT (1)
#define SAR_ADC_CLK_DIV_DEFUALT (2)
#define ADC_PATT_LEN_MAX (16)
#define TOUCH_PAD_FILTER_FACTOR_DEFAULT (4) // IIR filter coefficient.
#define TOUCH_PAD_SHIFT_DEFAULT (4) // Increase computing accuracy.
#define TOUCH_PAD_SHIFT_ROUND_DEFAULT (8) // ROUND = 2^(n-1); rounding off for fractional.
#define DAC_ERR_STR_CHANNEL_ERROR "DAC channel error"
static const char *RTC_MODULE_TAG = "RTC_MODULE";
#define RTC_MODULE_CHECK(a, str, ret_val) if (!(a)) { \
ESP_LOGE(RTC_MODULE_TAG,"%s:%d (%s):%s", __FILE__, __LINE__, __FUNCTION__, str); \
return (ret_val); \
}
#define RTC_RES_CHECK(res, ret_val) if ( (a) != ESP_OK) { \
ESP_LOGE(RTC_MODULE_TAG,"%s:%d (%s)", __FILE__, __LINE__, __FUNCTION__); \
return (ret_val); \
}
#define ADC_CHECK_UNIT(unit) RTC_MODULE_CHECK(adc_unit < ADC_UNIT_2, "ADC unit error, only support ADC1 for now", ESP_ERR_INVALID_ARG)
#define ADC1_CHECK_FUNCTION_RET(fun_ret) if(fun_ret!=ESP_OK){\
ESP_LOGE(RTC_MODULE_TAG,"%s:%d\n",__FUNCTION__,__LINE__);\
return ESP_FAIL;\
}
#define ADC2_CHECK_FUNCTION_RET(fun_ret) do { if(fun_ret!=ESP_OK){\
ESP_LOGE(RTC_MODULE_TAG,"%s:%d\n",__FUNCTION__,__LINE__);\
return ESP_FAIL;\
} }while (0)
portMUX_TYPE rtc_spinlock = portMUX_INITIALIZER_UNLOCKED;
2019-06-20 08:13:47 +00:00
#if CONFIG_IDF_TARGET_ESP32
static SemaphoreHandle_t rtc_touch_mux = NULL;
2019-06-20 08:13:47 +00:00
#endif
/*
In ADC2, there're two locks used for different cases:
1. lock shared with app and WIFI:
when wifi using the ADC2, we assume it will never stop,
so app checks the lock and returns immediately if failed.
2. lock shared between tasks:
when several tasks sharing the ADC2, we want to guarantee
all the requests will be handled.
Since conversions are short (about 31us), app returns the lock very soon,
we use a spinlock to stand there waiting to do conversions one by one.
adc2_spinlock should be acquired first, then adc2_wifi_lock or rtc_spinlock.
*/
//prevent ADC2 being used by wifi and other tasks at the same time.
static _lock_t adc2_wifi_lock;
//prevent ADC2 being used by tasks (regardless of WIFI)
portMUX_TYPE adc2_spinlock = portMUX_INITIALIZER_UNLOCKED;
//prevent ADC1 being used by I2S dma and other tasks at the same time.
static _lock_t adc1_i2s_lock;
#if CONFIG_IDF_TARGET_ESP32
typedef struct {
TimerHandle_t timer;
uint16_t filtered_val[TOUCH_PAD_MAX];
uint16_t raw_val[TOUCH_PAD_MAX];
uint32_t filter_period;
uint32_t period;
bool enable;
} touch_pad_filter_t;
static touch_pad_filter_t *s_touch_pad_filter = NULL;
// check if touch pad be inited.
static uint16_t s_touch_pad_init_bit = 0x0000;
static filter_cb_t s_filter_cb = NULL;
#endif
typedef enum {
ADC_CTRL_RTC = 0,
ADC_CTRL_ULP = 1,
ADC_CTRL_DIG = 2,
ADC2_CTRL_PWDET = 3,
} adc_controller_t ;
static const char TAG[] = "adc";
static inline void dac_output_set_enable(dac_channel_t channel, bool enable);
static inline void adc1_hall_enable(bool enable);
/*---------------------------------------------------------------
RTC IO
---------------------------------------------------------------*/
esp_err_t rtc_gpio_init(gpio_num_t gpio_num)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
// 0: GPIO connected to digital GPIO module. 1: GPIO connected to analog RTC module.
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, (rtc_gpio_desc[gpio_num].mux));
//0:RTC FUNCIOTN 1,2,3:Reserved
SET_PERI_REG_BITS(rtc_gpio_desc[gpio_num].reg, RTC_IO_TOUCH_PAD1_FUN_SEL_V, 0x0, rtc_gpio_desc[gpio_num].func);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
rtc_gpio_reg[gpio_num]->mux_sel = 0x1;
rtc_gpio_reg[gpio_num]->fun_sel = 0x0;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t rtc_gpio_deinit(gpio_num_t gpio_num)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
//Select Gpio as Digital Gpio
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, (rtc_gpio_desc[gpio_num].mux));
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
rtc_gpio_reg[gpio_num]->mux_sel = 0x0;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
static esp_err_t rtc_gpio_output_enable(gpio_num_t gpio_num)
{
2019-06-19 14:00:59 +00:00
#if CONFIG_IDF_TARGET_ESP32
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
RTC_MODULE_CHECK(rtc_gpio_num != -1, "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_ENABLE_W1TS_S)));
2019-06-19 14:00:59 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TS_REG, (1 << ( gpio_num + RTC_GPIO_ENABLE_W1TS_S)));
#endif
return ESP_OK;
}
static esp_err_t rtc_gpio_output_disable(gpio_num_t gpio_num)
{
2019-06-19 14:00:59 +00:00
#if CONFIG_IDF_TARGET_ESP32
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
RTC_MODULE_CHECK(rtc_gpio_num != -1, "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TC_REG, (1 << ( rtc_gpio_num + RTC_GPIO_ENABLE_W1TC_S)));
2019-06-19 14:00:59 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TC_REG, (1 << ( gpio_num + RTC_GPIO_ENABLE_W1TC_S)));
#endif
return ESP_OK;
}
static esp_err_t rtc_gpio_input_enable(gpio_num_t gpio_num)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].ie);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
rtc_gpio_reg[gpio_num]->fun_ie = 1;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
static esp_err_t rtc_gpio_input_disable(gpio_num_t gpio_num)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].ie);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
rtc_gpio_reg[gpio_num]->fun_ie = 0;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32S2BETA
esp_err_t rtc_gpio_sleep_output_enable(gpio_num_t gpio_num, bool output)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
rtc_gpio_reg[gpio_num]->slp_sel = 1;
rtc_gpio_reg[gpio_num]->slp_oe = output;
return ESP_OK;
}
esp_err_t rtc_gpio_sleep_input_enable(gpio_num_t gpio_num, bool input)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
rtc_gpio_reg[gpio_num]->slp_sel = 1;
rtc_gpio_reg[gpio_num]->slp_ie = input;
return ESP_OK;
}
esp_err_t rtc_gpio_sleep_mode_disable(gpio_num_t gpio_num)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
rtc_gpio_reg[gpio_num]->slp_sel = 0;
return ESP_OK;
}
#endif
esp_err_t rtc_gpio_set_level(gpio_num_t gpio_num, uint32_t level)
{
2019-06-19 14:00:59 +00:00
#if CONFIG_IDF_TARGET_ESP32
int rtc_gpio_num = rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;;
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
if (level) {
WRITE_PERI_REG(RTC_GPIO_OUT_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_OUT_DATA_W1TS_S)));
} else {
WRITE_PERI_REG(RTC_GPIO_OUT_W1TC_REG, (1 << (rtc_gpio_num + RTC_GPIO_OUT_DATA_W1TC_S)));
}
2019-06-19 14:00:59 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
if (level) {
WRITE_PERI_REG(RTC_GPIO_OUT_W1TS_REG, (1 << (gpio_num + RTC_GPIO_OUT_DATA_W1TS_S)));
} else {
WRITE_PERI_REG(RTC_GPIO_OUT_W1TC_REG, (1 << (gpio_num + RTC_GPIO_OUT_DATA_W1TC_S)));
}
#endif
return ESP_OK;
}
uint32_t rtc_gpio_get_level(gpio_num_t gpio_num)
{
uint32_t level = 0;
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
level = READ_PERI_REG(RTC_GPIO_IN_REG);
portEXIT_CRITICAL(&rtc_spinlock);
return ((level >> (RTC_GPIO_IN_NEXT_S + rtc_gpio_num)) & 0x01);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
level = RTCIO.in_val.in;
portEXIT_CRITICAL(&rtc_spinlock);
return ((level >> gpio_num) & 0x1);
#endif
}
esp_err_t rtc_gpio_set_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t strength)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "Output pad only", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(strength < GPIO_DRIVE_CAP_MAX, "GPIO drive capability error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
SET_PERI_REG_BITS(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].drv_v, strength, rtc_gpio_desc[gpio_num].drv_s);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
rtc_gpio_reg[gpio_num]->drv = strength;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t rtc_gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* strength)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "Output pad only", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(strength != NULL, "GPIO drive pointer error", ESP_ERR_INVALID_ARG);
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
*strength = GET_PERI_REG_BITS2(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].drv_v, rtc_gpio_desc[gpio_num].drv_s);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
*strength = rtc_gpio_reg[gpio_num]->drv;
#endif
return ESP_OK;
}
esp_err_t rtc_gpio_set_direction(gpio_num_t gpio_num, rtc_gpio_mode_t mode)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
switch (mode) {
case RTC_GPIO_MODE_INPUT_ONLY:
rtc_gpio_output_disable(gpio_num);
rtc_gpio_input_enable(gpio_num);
break;
case RTC_GPIO_MODE_OUTPUT_ONLY:
rtc_gpio_output_enable(gpio_num);
rtc_gpio_input_disable(gpio_num);
break;
case RTC_GPIO_MODE_INPUT_OUTPUT:
rtc_gpio_output_enable(gpio_num);
rtc_gpio_input_enable(gpio_num);
break;
case RTC_GPIO_MODE_DISABLED:
rtc_gpio_output_disable(gpio_num);
rtc_gpio_input_disable(gpio_num);
break;
}
return ESP_OK;
}
esp_err_t rtc_gpio_pullup_en(gpio_num_t gpio_num)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
//this is a digital pad
if (rtc_gpio_desc[gpio_num].pullup == 0) {
return ESP_ERR_INVALID_ARG;
}
2019-06-13 07:37:58 +00:00
#endif
//this is a rtc pad
portENTER_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pullup);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
rtc_gpio_reg[gpio_num]->rue = 0x1;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32S2BETA
esp_err_t rtc_gpio_set_output_mode(gpio_num_t gpio_num, rtc_io_out_mode_t mode)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
RTCIO.pin[gpio_num].pad_driver = mode;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t rtc_gpio_get_output_mode(gpio_num_t gpio_num, rtc_io_out_mode_t *mode)
{
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
*mode = RTCIO.pin[gpio_num].pad_driver;
return ESP_OK;
}
#endif
esp_err_t rtc_gpio_pulldown_en(gpio_num_t gpio_num)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
//this is a digital pad
if (rtc_gpio_desc[gpio_num].pulldown == 0) {
return ESP_ERR_INVALID_ARG;
}
//this is a rtc pad
portENTER_CRITICAL(&rtc_spinlock);
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pulldown);
portEXIT_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
portENTER_CRITICAL(&rtc_spinlock);
rtc_gpio_reg[gpio_num]->rde = 0x1;
portEXIT_CRITICAL(&rtc_spinlock);
#endif
return ESP_OK;
}
esp_err_t rtc_gpio_pullup_dis(gpio_num_t gpio_num)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
//this is a digital pad
if ( rtc_gpio_desc[gpio_num].pullup == 0 ) {
return ESP_ERR_INVALID_ARG;
}
//this is a rtc pad
portENTER_CRITICAL(&rtc_spinlock);
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pullup);
portEXIT_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
portENTER_CRITICAL(&rtc_spinlock);
rtc_gpio_reg[gpio_num]->rue = 0x0;
portEXIT_CRITICAL(&rtc_spinlock);
#endif
return ESP_OK;
}
esp_err_t rtc_gpio_pulldown_dis(gpio_num_t gpio_num)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
//this is a digital pad
if (rtc_gpio_desc[gpio_num].pulldown == 0) {
return ESP_ERR_INVALID_ARG;
}
//this is a rtc pad
portENTER_CRITICAL(&rtc_spinlock);
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pulldown);
portEXIT_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
portENTER_CRITICAL(&rtc_spinlock);
rtc_gpio_reg[gpio_num]->rde = 0x0;
portEXIT_CRITICAL(&rtc_spinlock);
#endif
return ESP_OK;
}
esp_err_t rtc_gpio_hold_en(gpio_num_t gpio_num)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
// check if an RTC IO
if (rtc_gpio_desc[gpio_num].pullup == 0) {
return ESP_ERR_INVALID_ARG;
}
portENTER_CRITICAL(&rtc_spinlock);
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].hold);
portEXIT_CRITICAL(&rtc_spinlock);
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
RTCCNTL.pad_hold.val |= BIT(gpio_num);
portEXIT_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#endif
return ESP_OK;
}
esp_err_t rtc_gpio_hold_dis(gpio_num_t gpio_num)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
// check if an RTC IO
if (rtc_gpio_desc[gpio_num].pullup == 0) {
return ESP_ERR_INVALID_ARG;
}
portENTER_CRITICAL(&rtc_spinlock);
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].hold);
portEXIT_CRITICAL(&rtc_spinlock);
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
RTCCNTL.pad_hold.val &= ~(BIT(gpio_num));
portEXIT_CRITICAL(&rtc_spinlock);
2019-06-13 07:37:58 +00:00
#endif
return ESP_OK;
}
esp_err_t rtc_gpio_isolate(gpio_num_t gpio_num)
{
2019-06-20 08:13:47 +00:00
#if CONFIG_IDF_TARGET_ESP32
if (rtc_gpio_desc[gpio_num].reg == 0) {
return ESP_ERR_INVALID_ARG;
}
2019-06-20 08:13:47 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
#endif
rtc_gpio_pullup_dis(gpio_num);
rtc_gpio_pulldown_dis(gpio_num);
rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED);
rtc_gpio_hold_en(gpio_num);
return ESP_OK;
}
void rtc_gpio_force_hold_dis_all(void)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
for (int gpio = 0; gpio < GPIO_PIN_COUNT; ++gpio) {
const rtc_gpio_desc_t* desc = &rtc_gpio_desc[gpio];
if (desc->hold_force != 0) {
REG_CLR_BIT(RTC_CNTL_HOLD_FORCE_REG, desc->hold_force);
}
}
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
portENTER_CRITICAL(&rtc_spinlock);
RTCCNTL.rtc_pwc.rtc_pad_force_hold = 0;
portEXIT_CRITICAL(&rtc_spinlock);
#endif
}
esp_err_t rtc_gpio_wakeup_enable(gpio_num_t gpio_num, gpio_int_type_t intr_type)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
int rtc_num = rtc_gpio_desc[gpio_num].rtc_num;
if (rtc_num < 0) {
return ESP_ERR_INVALID_ARG;
}
if (( intr_type != GPIO_INTR_LOW_LEVEL ) && ( intr_type != GPIO_INTR_HIGH_LEVEL )) {
return ESP_ERR_INVALID_ARG;
}
uint32_t reg = RTC_GPIO_PIN0_REG + rtc_num * sizeof(uint32_t);
/* each pin has its own register, spinlock not needed */
REG_SET_BIT(reg, RTC_GPIO_PIN0_WAKEUP_ENABLE);
REG_SET_FIELD(reg, RTC_GPIO_PIN0_INT_TYPE, intr_type);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
if (( intr_type != GPIO_INTR_LOW_LEVEL ) && ( intr_type != GPIO_INTR_HIGH_LEVEL )) {
return ESP_ERR_INVALID_ARG;
}
/* each pin has its own register, spinlock not needed */
RTCIO.pin[gpio_num].wakeup_enable = 1;
RTCIO.pin[gpio_num].int_type = intr_type;
#endif
return ESP_OK;
}
esp_err_t rtc_gpio_wakeup_disable(gpio_num_t gpio_num)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
int rtc_num = rtc_gpio_desc[gpio_num].rtc_num;
if (rtc_num < 0) {
return ESP_ERR_INVALID_ARG;
}
uint32_t reg = RTC_GPIO_PIN0_REG + rtc_num * sizeof(uint32_t);
/* each pin has its own register, spinlock not needed */
REG_CLR_BIT(reg, RTC_GPIO_PIN0_WAKEUP_ENABLE);
REG_SET_FIELD(reg, RTC_GPIO_PIN0_INT_TYPE, 0);
2019-06-13 07:37:58 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
/* each pin has its own register, spinlock not needed */
RTCIO.pin[gpio_num].wakeup_enable = 0;
RTCIO.pin[gpio_num].int_type = 0;
#endif
return ESP_OK;
}
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32S2BETA
esp_err_t rtc_gpio_force_hold_all()
{
portENTER_CRITICAL(&rtc_spinlock);
RTCCNTL.rtc_pwc.rtc_pad_force_hold = 1;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
#endif
#if CONFIG_IDF_TARGET_ESP32
/*---------------------------------------------------------------
Touch Pad
---------------------------------------------------------------*/
//Some register bits of touch sensor 8 and 9 are mismatched, we need to swap the bits.
#define BITSWAP(data, n, m) (((data >> n) & 0x1) == ((data >> m) & 0x1) ? (data) : ((data) ^ ((0x1 <<n) | (0x1 << m))))
#define TOUCH_BITS_SWAP(v) BITSWAP(v, TOUCH_PAD_NUM8, TOUCH_PAD_NUM9)
static esp_err_t _touch_pad_read(touch_pad_t touch_num, uint16_t *touch_value, touch_fsm_mode_t mode);
//Some registers of touch sensor 8 and 9 are mismatched, we need to swap register index
inline static touch_pad_t touch_pad_num_wrap(touch_pad_t touch_num)
{
if (touch_num == TOUCH_PAD_NUM8) {
return TOUCH_PAD_NUM9;
} else if (touch_num == TOUCH_PAD_NUM9) {
return TOUCH_PAD_NUM8;
}
return touch_num;
}
esp_err_t touch_pad_isr_handler_register(void (*fn)(void *), void *arg, int no_use, intr_handle_t *handle_no_use)
{
RTC_MODULE_CHECK(fn, "Touch_Pad ISR null", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
return rtc_isr_register(fn, arg, RTC_CNTL_TOUCH_INT_ST_M);
#else
return ESP_FAIL;
#endif
}
esp_err_t touch_pad_isr_register(intr_handler_t fn, void* arg)
{
RTC_MODULE_CHECK(fn, "Touch_Pad ISR null", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
return rtc_isr_register(fn, arg, RTC_CNTL_TOUCH_INT_ST_M);
#else
return ESP_FAIL;
#endif
}
esp_err_t touch_pad_isr_deregister(intr_handler_t fn, void *arg)
{
return rtc_isr_deregister(fn, arg);
}
static esp_err_t touch_pad_get_io_num(touch_pad_t touch_num, gpio_num_t *gpio_num)
{
switch (touch_num) {
case TOUCH_PAD_NUM0:
*gpio_num = TOUCH_PAD_NUM0_GPIO_NUM;
break;
case TOUCH_PAD_NUM1:
*gpio_num = TOUCH_PAD_NUM1_GPIO_NUM;
break;
case TOUCH_PAD_NUM2:
*gpio_num = TOUCH_PAD_NUM2_GPIO_NUM;
break;
case TOUCH_PAD_NUM3:
*gpio_num = TOUCH_PAD_NUM3_GPIO_NUM;
break;
case TOUCH_PAD_NUM4:
*gpio_num = TOUCH_PAD_NUM4_GPIO_NUM;
break;
case TOUCH_PAD_NUM5:
*gpio_num = TOUCH_PAD_NUM5_GPIO_NUM;
break;
case TOUCH_PAD_NUM6:
*gpio_num = TOUCH_PAD_NUM6_GPIO_NUM;
break;
case TOUCH_PAD_NUM7:
*gpio_num = TOUCH_PAD_NUM7_GPIO_NUM;
break;
case TOUCH_PAD_NUM8:
*gpio_num = TOUCH_PAD_NUM8_GPIO_NUM;
break;
case TOUCH_PAD_NUM9:
*gpio_num = TOUCH_PAD_NUM9_GPIO_NUM;
break;
default:
return ESP_ERR_INVALID_ARG;
}
return ESP_OK;
}
static uint32_t _touch_filter_iir(uint32_t in_now, uint32_t out_last, uint32_t k)
{
if (k == 0) {
return in_now;
} else {
uint32_t out_now = (in_now + (k - 1) * out_last) / k;
return out_now;
}
}
esp_err_t touch_pad_set_filter_read_cb(filter_cb_t read_cb)
{
s_filter_cb = read_cb;
return ESP_OK;
}
static void touch_pad_filter_cb(void *arg)
{
static uint32_t s_filtered_temp[TOUCH_PAD_MAX] = {0};
if (s_touch_pad_filter == NULL || rtc_touch_mux == NULL) {
return;
}
uint16_t val = 0;
touch_fsm_mode_t mode;
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
touch_pad_get_fsm_mode(&mode);
for (int i = 0; i < TOUCH_PAD_MAX; i++) {
if ((s_touch_pad_init_bit >> i) & 0x1) {
_touch_pad_read(i, &val, mode);
s_touch_pad_filter->raw_val[i] = val;
s_filtered_temp[i] = s_filtered_temp[i] == 0 ? ((uint32_t)val << TOUCH_PAD_SHIFT_DEFAULT) : s_filtered_temp[i];
s_filtered_temp[i] = _touch_filter_iir((val << TOUCH_PAD_SHIFT_DEFAULT),
s_filtered_temp[i], TOUCH_PAD_FILTER_FACTOR_DEFAULT);
s_touch_pad_filter->filtered_val[i] = (s_filtered_temp[i] + TOUCH_PAD_SHIFT_ROUND_DEFAULT) >> TOUCH_PAD_SHIFT_DEFAULT;
}
}
xTimerReset(s_touch_pad_filter->timer, portMAX_DELAY);
xSemaphoreGive(rtc_touch_mux);
if(s_filter_cb != NULL) {
//return the raw data and filtered data.
s_filter_cb(s_touch_pad_filter->raw_val, s_touch_pad_filter->filtered_val);
}
}
esp_err_t touch_pad_set_meas_time(uint16_t sleep_cycle, uint16_t meas_cycle)
{
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
portENTER_CRITICAL(&rtc_spinlock);
//touch sensor sleep cycle Time = sleep_cycle / RTC_SLOW_CLK( can be 150k or 32k depending on the options)
SENS.sar_touch_ctrl2.touch_sleep_cycles = sleep_cycle;
//touch sensor measure time= meas_cycle / 8Mhz
SENS.sar_touch_ctrl1.touch_meas_delay = meas_cycle;
//the waiting cycles (in 8MHz) between TOUCH_START and TOUCH_XPD
SENS.sar_touch_ctrl1.touch_xpd_wait = TOUCH_PAD_MEASURE_WAIT_DEFAULT;
portEXIT_CRITICAL(&rtc_spinlock);
xSemaphoreGive(rtc_touch_mux);
return ESP_OK;
}
esp_err_t touch_pad_get_meas_time(uint16_t *sleep_cycle, uint16_t *meas_cycle)
{
portENTER_CRITICAL(&rtc_spinlock);
if (sleep_cycle) {
*sleep_cycle = SENS.sar_touch_ctrl2.touch_sleep_cycles;
}
if (meas_cycle) {
*meas_cycle = SENS.sar_touch_ctrl1.touch_meas_delay;
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_set_voltage(touch_high_volt_t refh, touch_low_volt_t refl, touch_volt_atten_t atten)
{
RTC_MODULE_CHECK(((refh < TOUCH_HVOLT_MAX) && (refh >= (int )TOUCH_HVOLT_KEEP)), "touch refh error",
ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(((refl < TOUCH_LVOLT_MAX) && (refh >= (int )TOUCH_LVOLT_KEEP)), "touch refl error",
ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(((atten < TOUCH_HVOLT_ATTEN_MAX) && (refh >= (int )TOUCH_HVOLT_ATTEN_KEEP)), "touch atten error",
ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
portENTER_CRITICAL(&rtc_spinlock);
if (refh > TOUCH_HVOLT_KEEP) {
RTCIO.touch_cfg.drefh = refh;
}
if (refl > TOUCH_LVOLT_KEEP) {
RTCIO.touch_cfg.drefl = refl;
}
if (atten > TOUCH_HVOLT_ATTEN_KEEP) {
RTCIO.touch_cfg.drange = atten;
}
portEXIT_CRITICAL(&rtc_spinlock);
#endif
return ESP_OK;
}
esp_err_t touch_pad_get_voltage(touch_high_volt_t *refh, touch_low_volt_t *refl, touch_volt_atten_t *atten)
{
#if CONFIG_IDF_TARGET_ESP32
portENTER_CRITICAL(&rtc_spinlock);
if (refh) {
*refh = RTCIO.touch_cfg.drefh;
}
if (refl) {
*refl = RTCIO.touch_cfg.drefl;
}
if (atten) {
*atten = RTCIO.touch_cfg.drange;
}
portEXIT_CRITICAL(&rtc_spinlock);
#endif
return ESP_OK;
}
esp_err_t touch_pad_set_cnt_mode(touch_pad_t touch_num, touch_cnt_slope_t slope, touch_tie_opt_t opt)
{
RTC_MODULE_CHECK((slope < TOUCH_PAD_SLOPE_MAX), "touch slope error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK((opt < TOUCH_PAD_TIE_OPT_MAX), "touch opt error", ESP_ERR_INVALID_ARG);
touch_pad_t touch_pad_wrap = touch_pad_num_wrap(touch_num);
portENTER_CRITICAL(&rtc_spinlock);
RTCIO.touch_pad[touch_pad_wrap].tie_opt = opt;
RTCIO.touch_pad[touch_num].dac = slope;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_get_cnt_mode(touch_pad_t touch_num, touch_cnt_slope_t *slope, touch_tie_opt_t *opt)
{
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
touch_pad_t touch_pad_wrap = touch_pad_num_wrap(touch_num);
portENTER_CRITICAL(&rtc_spinlock);
if(opt) {
*opt = RTCIO.touch_pad[touch_pad_wrap].tie_opt;
}
if(slope) {
*slope = RTCIO.touch_pad[touch_num].dac;
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_io_init(touch_pad_t touch_num)
{
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
gpio_num_t gpio_num = GPIO_NUM_0;
touch_pad_get_io_num(touch_num, &gpio_num);
rtc_gpio_init(gpio_num);
rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED);
rtc_gpio_pulldown_dis(gpio_num);
rtc_gpio_pullup_dis(gpio_num);
return ESP_OK;
}
esp_err_t touch_pad_set_fsm_mode(touch_fsm_mode_t mode)
{
RTC_MODULE_CHECK((mode < TOUCH_FSM_MODE_MAX), "touch fsm mode error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
SENS.sar_touch_ctrl2.touch_start_en = 0;
SENS.sar_touch_ctrl2.touch_start_force = mode;
RTCCNTL.state0.touch_slp_timer_en = (mode == TOUCH_FSM_MODE_TIMER ? 1 : 0);
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_get_fsm_mode(touch_fsm_mode_t *mode)
{
if (mode) {
*mode = SENS.sar_touch_ctrl2.touch_start_force;
}
return ESP_OK;
}
esp_err_t touch_pad_sw_start(void)
{
portENTER_CRITICAL(&rtc_spinlock);
SENS.sar_touch_ctrl2.touch_start_en = 0;
SENS.sar_touch_ctrl2.touch_start_en = 1;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_set_thresh(touch_pad_t touch_num, uint16_t threshold)
{
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
touch_pad_t tp_wrap = touch_pad_num_wrap(touch_num);
portENTER_CRITICAL(&rtc_spinlock);
if (tp_wrap & 0x1) {
SENS.touch_thresh[tp_wrap / 2].l_thresh = threshold;
} else {
SENS.touch_thresh[tp_wrap / 2].h_thresh = threshold;
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_get_thresh(touch_pad_t touch_num, uint16_t *threshold)
{
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
touch_pad_t tp_wrap = touch_pad_num_wrap(touch_num);
if (threshold) {
*threshold = (tp_wrap & 0x1 )? \
SENS.touch_thresh[tp_wrap / 2].l_thresh : \
SENS.touch_thresh[tp_wrap / 2].h_thresh;
}
return ESP_OK;
}
esp_err_t touch_pad_set_trigger_mode(touch_trigger_mode_t mode)
{
RTC_MODULE_CHECK((mode < TOUCH_TRIGGER_MAX), "touch trigger mode error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
SENS.sar_touch_ctrl1.touch_out_sel = mode;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_get_trigger_mode(touch_trigger_mode_t *mode)
{
if (mode) {
*mode = SENS.sar_touch_ctrl1.touch_out_sel;
}
return ESP_OK;
}
esp_err_t touch_pad_set_trigger_source(touch_trigger_src_t src)
{
RTC_MODULE_CHECK((src < TOUCH_TRIGGER_SOURCE_MAX), "touch trigger source error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
SENS.sar_touch_ctrl1.touch_out_1en = src;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_get_trigger_source(touch_trigger_src_t *src)
{
if (src) {
*src = SENS.sar_touch_ctrl1.touch_out_1en;
}
return ESP_OK;
}
esp_err_t touch_pad_set_group_mask(uint16_t set1_mask, uint16_t set2_mask, uint16_t en_mask)
{
RTC_MODULE_CHECK((set1_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set1 bitmask error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK((set2_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set2 bitmask error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK((en_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch work_en bitmask error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
SENS.sar_touch_enable.touch_pad_outen1 |= TOUCH_BITS_SWAP(set1_mask);
SENS.sar_touch_enable.touch_pad_outen2 |= TOUCH_BITS_SWAP(set2_mask);
SENS.sar_touch_enable.touch_pad_worken |= TOUCH_BITS_SWAP(en_mask);
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_get_group_mask(uint16_t *set1_mask, uint16_t *set2_mask, uint16_t *en_mask)
{
portENTER_CRITICAL(&rtc_spinlock);
if (set1_mask) {
*set1_mask = TOUCH_BITS_SWAP(SENS.sar_touch_enable.touch_pad_outen1);
}
if (set2_mask) {
*set2_mask = TOUCH_BITS_SWAP(SENS.sar_touch_enable.touch_pad_outen2);
}
if (en_mask) {
*en_mask = TOUCH_BITS_SWAP(SENS.sar_touch_enable.touch_pad_worken);
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_clear_group_mask(uint16_t set1_mask, uint16_t set2_mask, uint16_t en_mask)
{
RTC_MODULE_CHECK((set1_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set1 bitmask error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK((set2_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set2 bitmask error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK((en_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch work_en bitmask error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
SENS.sar_touch_enable.touch_pad_outen1 &= TOUCH_BITS_SWAP(~set1_mask);
SENS.sar_touch_enable.touch_pad_outen2 &= TOUCH_BITS_SWAP(~set2_mask);
SENS.sar_touch_enable.touch_pad_worken &= TOUCH_BITS_SWAP(~en_mask);
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
uint32_t IRAM_ATTR touch_pad_get_status(void)
{
uint32_t status = SENS.sar_touch_ctrl2.touch_meas_en;
return TOUCH_BITS_SWAP(status);
}
esp_err_t IRAM_ATTR touch_pad_clear_status(void)
{
SENS.sar_touch_ctrl2.touch_meas_en_clr = 1;
return ESP_OK;
}
esp_err_t touch_pad_intr_enable(void)
{
portENTER_CRITICAL(&rtc_spinlock);
RTCCNTL.int_ena.rtc_touch = 1;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_intr_disable(void)
{
portENTER_CRITICAL(&rtc_spinlock);
RTCCNTL.int_ena.rtc_touch = 0;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t touch_pad_config(touch_pad_t touch_num, uint16_t threshold)
{
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
touch_fsm_mode_t mode;
touch_pad_set_thresh(touch_num, threshold);
touch_pad_io_init(touch_num);
touch_pad_set_cnt_mode(touch_num, TOUCH_PAD_SLOPE_7, TOUCH_PAD_TIE_OPT_LOW);
touch_pad_get_fsm_mode(&mode);
if (TOUCH_FSM_MODE_SW == mode) {
touch_pad_clear_group_mask((1 << touch_num), (1 << touch_num), (1 << touch_num));
s_touch_pad_init_bit |= (1 << touch_num);
} else if (TOUCH_FSM_MODE_TIMER == mode){
uint16_t sleep_time = 0;
uint16_t meas_cycle = 0;
uint32_t wait_time_ms = 0;
uint32_t wait_tick = 0;
uint32_t rtc_clk = rtc_clk_slow_freq_get_hz();
touch_pad_set_group_mask((1 << touch_num), (1 << touch_num), (1 << touch_num));
touch_pad_get_meas_time(&sleep_time, &meas_cycle);
//If the FSM mode is 'TOUCH_FSM_MODE_TIMER', The data will be ready after one measurement cycle
//after this function is executed, otherwise, the "touch_value" by "touch_pad_read" is 0.
wait_time_ms = sleep_time/(rtc_clk/1000) + meas_cycle/(RTC_FAST_CLK_FREQ_APPROX/1000);
wait_tick = wait_time_ms/portTICK_RATE_MS;
vTaskDelay(wait_tick ? wait_tick : 1);
s_touch_pad_init_bit |= (1 << touch_num);
} else {
return ESP_FAIL;
}
return ESP_OK;
}
esp_err_t touch_pad_init(void)
{
if (rtc_touch_mux == NULL) {
rtc_touch_mux = xSemaphoreCreateMutex();
}
if (rtc_touch_mux == NULL) {
return ESP_FAIL;
}
touch_pad_intr_disable();
touch_pad_clear_group_mask(TOUCH_PAD_BIT_MASK_MAX, TOUCH_PAD_BIT_MASK_MAX, TOUCH_PAD_BIT_MASK_MAX);
touch_pad_set_trigger_mode(TOUCH_TRIGGER_MODE_DEFAULT);
touch_pad_set_trigger_source(TOUCH_TRIGGER_SOURCE_DEFAULT);
touch_pad_clear_status();
touch_pad_set_meas_time(TOUCH_PAD_SLEEP_CYCLE_DEFAULT, TOUCH_PAD_MEASURE_CYCLE_DEFAULT);
touch_pad_set_fsm_mode(TOUCH_FSM_MODE_DEFAULT);
return ESP_OK;
}
esp_err_t touch_pad_deinit(void)
{
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
if (s_touch_pad_filter != NULL) {
touch_pad_filter_stop();
touch_pad_filter_delete();
}
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
s_touch_pad_init_bit = 0x0000;
touch_pad_set_fsm_mode(TOUCH_FSM_MODE_SW);
touch_pad_clear_status();
touch_pad_intr_disable();
xSemaphoreGive(rtc_touch_mux);
vSemaphoreDelete(rtc_touch_mux);
rtc_touch_mux = NULL;
return ESP_OK;
}
static esp_err_t _touch_pad_read(touch_pad_t touch_num, uint16_t *touch_value, touch_fsm_mode_t mode)
{
esp_err_t res = ESP_OK;
touch_pad_t tp_wrap = touch_pad_num_wrap(touch_num);
if (TOUCH_FSM_MODE_SW == mode) {
touch_pad_set_group_mask((1 << touch_num), (1 << touch_num), (1 << touch_num));
touch_pad_sw_start();
while (SENS.sar_touch_ctrl2.touch_meas_done == 0) {};
*touch_value = (tp_wrap & 0x1) ? \
SENS.touch_meas[tp_wrap / 2].l_val: \
SENS.touch_meas[tp_wrap / 2].h_val;
touch_pad_clear_group_mask((1 << touch_num), (1 << touch_num), (1 << touch_num));
} else if (TOUCH_FSM_MODE_TIMER == mode) {
while (SENS.sar_touch_ctrl2.touch_meas_done == 0) {};
*touch_value = (tp_wrap & 0x1) ? \
SENS.touch_meas[tp_wrap / 2].l_val: \
SENS.touch_meas[tp_wrap / 2].h_val;
} else {
res = ESP_FAIL;
}
if (*touch_value == 0) {
res = ESP_ERR_INVALID_STATE;
}
return res;
}
esp_err_t touch_pad_read(touch_pad_t touch_num, uint16_t *touch_value)
{
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(touch_value != NULL, "touch_value", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
esp_err_t res = ESP_OK;
touch_fsm_mode_t mode;
touch_pad_get_fsm_mode(&mode);
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
res = _touch_pad_read(touch_num, touch_value, mode);
xSemaphoreGive(rtc_touch_mux);
return res;
}
IRAM_ATTR esp_err_t touch_pad_read_raw_data(touch_pad_t touch_num, uint16_t *touch_value)
{
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(touch_value != NULL, "touch_value", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_FAIL);
*touch_value = s_touch_pad_filter->raw_val[touch_num];
if (*touch_value == 0) {
return ESP_ERR_INVALID_STATE;
}
return ESP_OK;
}
IRAM_ATTR esp_err_t touch_pad_read_filtered(touch_pad_t touch_num, uint16_t *touch_value)
{
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(touch_value != NULL, "touch_value", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_FAIL);
*touch_value = (s_touch_pad_filter->filtered_val[touch_num]);
if (*touch_value == 0) {
return ESP_ERR_INVALID_STATE;
}
return ESP_OK;
}
esp_err_t touch_pad_set_filter_period(uint32_t new_period_ms)
{
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
RTC_MODULE_CHECK(new_period_ms > 0, "Touch pad filter period error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
esp_err_t ret = ESP_OK;
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
if (s_touch_pad_filter != NULL) {
xTimerChangePeriod(s_touch_pad_filter->timer, new_period_ms / portTICK_PERIOD_MS, portMAX_DELAY);
s_touch_pad_filter->period = new_period_ms;
} else {
ESP_LOGE(RTC_MODULE_TAG, "Touch pad filter deleted");
ret = ESP_ERR_INVALID_STATE;
}
xSemaphoreGive(rtc_touch_mux);
return ret;
}
esp_err_t touch_pad_get_filter_period(uint32_t* p_period_ms)
{
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
RTC_MODULE_CHECK(p_period_ms != NULL, "Touch pad period pointer error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
esp_err_t ret = ESP_OK;
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
if (s_touch_pad_filter != NULL) {
*p_period_ms = s_touch_pad_filter->period;
} else {
ESP_LOGE(RTC_MODULE_TAG, "Touch pad filter deleted");
ret = ESP_ERR_INVALID_STATE;
}
xSemaphoreGive(rtc_touch_mux);
return ret;
}
esp_err_t touch_pad_filter_start(uint32_t filter_period_ms)
{
RTC_MODULE_CHECK(filter_period_ms >= portTICK_PERIOD_MS, "Touch pad filter period error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
if (s_touch_pad_filter == NULL) {
s_touch_pad_filter = (touch_pad_filter_t *) calloc(1, sizeof(touch_pad_filter_t));
if (s_touch_pad_filter == NULL) {
goto err_no_mem;
}
}
if (s_touch_pad_filter->timer == NULL) {
s_touch_pad_filter->timer = xTimerCreate("filter_tmr", filter_period_ms / portTICK_PERIOD_MS, pdFALSE,
NULL, touch_pad_filter_cb);
if (s_touch_pad_filter->timer == NULL) {
free(s_touch_pad_filter);
s_touch_pad_filter = NULL;
goto err_no_mem;
}
s_touch_pad_filter->period = filter_period_ms;
}
xSemaphoreGive(rtc_touch_mux);
touch_pad_filter_cb(NULL);
return ESP_OK;
err_no_mem:
xSemaphoreGive(rtc_touch_mux);
return ESP_ERR_NO_MEM;
}
esp_err_t touch_pad_filter_stop(void)
{
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
esp_err_t ret = ESP_OK;
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
if (s_touch_pad_filter != NULL) {
xTimerStop(s_touch_pad_filter->timer, portMAX_DELAY);
} else {
ESP_LOGE(RTC_MODULE_TAG, "Touch pad filter deleted");
ret = ESP_ERR_INVALID_STATE;
}
xSemaphoreGive(rtc_touch_mux);
return ret;
}
esp_err_t touch_pad_filter_delete(void)
{
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
if (s_touch_pad_filter != NULL) {
if (s_touch_pad_filter->timer != NULL) {
xTimerStop(s_touch_pad_filter->timer, portMAX_DELAY);
xTimerDelete(s_touch_pad_filter->timer, portMAX_DELAY);
s_touch_pad_filter->timer = NULL;
}
free(s_touch_pad_filter);
s_touch_pad_filter = NULL;
}
xSemaphoreGive(rtc_touch_mux);
return ESP_OK;
}
esp_err_t touch_pad_get_wakeup_status(touch_pad_t *pad_num)
{
uint32_t touch_mask = SENS.sar_touch_ctrl2.touch_meas_en;
if(touch_mask == 0) {
return ESP_FAIL;
}
*pad_num = touch_pad_num_wrap((touch_pad_t)(__builtin_ffs(touch_mask) - 1));
return ESP_OK;
}
#endif
/*---------------------------------------------------------------
ADC Common
---------------------------------------------------------------*/
#if CONFIG_IDF_TARGET_ESP32S2BETA
#define SENS_FORCE_XPD_AMP_FSM 0 // Use FSM to control power down
#define SENS_FORCE_XPD_AMP_PD 2 // Force power down
#define SENS_FORCE_XPD_AMP_PU 3 // Force power up
#define SENS_SAR1_ATTEN_VAL_MASK 0x3
#define SENS_SAR2_ATTEN_VAL_MASK 0x3
#define SENS_FORCE_XPD_SAR_SW_M (BIT(1))
#define SENS_FORCE_XPD_SAR_FSM 0 // Use FSM to control power down
#define SENS_FORCE_XPD_SAR_PD 2 // Force power down
#define SENS_FORCE_XPD_SAR_PU 3 // Force power up
#endif
static esp_err_t adc_set_fsm_time(int rst_wait, int start_wait, int standby_wait, int sample_cycle)
{
portENTER_CRITICAL(&rtc_spinlock);
2019-06-20 08:13:47 +00:00
#if CONFIG_IDF_TARGET_ESP32
// Internal FSM reset wait time
if (rst_wait >= 0) {
SYSCON.saradc_fsm.rstb_wait = rst_wait;
}
// Internal FSM start wait time
if (start_wait >= 0) {
SYSCON.saradc_fsm.start_wait = start_wait;
}
// Internal FSM standby wait time
if (standby_wait >= 0) {
SYSCON.saradc_fsm.standby_wait = standby_wait;
}
2019-06-20 08:13:47 +00:00
#elif CONFIG_IDF_TARGET_ESP32S2BETA
// Internal FSM reset wait time
if (rst_wait >= 0) {
SYSCON.saradc_fsm_wait.rstb_wait = rst_wait;
}
// Internal FSM start wait time
if (start_wait >= 0) {
SYSCON.saradc_fsm_wait.xpd_wait = start_wait;
}
// Internal FSM standby wait time
if (standby_wait >= 0) {
SYSCON.saradc_fsm_wait.standby_wait = standby_wait;
}
#endif
// Internal FSM standby sample cycle
if (sample_cycle >= 0) {
SYSCON.saradc_fsm.sample_cycle = sample_cycle;
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
static esp_err_t adc_set_data_format(adc_i2s_encode_t mode)
{
portENTER_CRITICAL(&rtc_spinlock);
//data format:
//0: ADC_ENCODE_12BIT [15:12]-channel [11:0]-12 bits ADC data
//1: ADC_ENCODE_11BIT [15]-1 [14:11]-channel [10:0]-11 bits ADC data, the resolution should not be larger than 11 bits in this case.
SYSCON.saradc_ctrl.data_sar_sel = mode;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
static esp_err_t adc_set_measure_limit(uint8_t meas_num, bool lim_en)
{
portENTER_CRITICAL(&rtc_spinlock);
// Set max measure number
SYSCON.saradc_ctrl2.max_meas_num = meas_num;
// Enable max measure number limit
SYSCON.saradc_ctrl2.meas_num_limit = lim_en;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
static esp_err_t adc_set_work_mode(adc_unit_t adc_unit)
{
portENTER_CRITICAL(&rtc_spinlock);
if (adc_unit == ADC_UNIT_1) {
// saradc mode sel : 0--single saradc; 1--double saradc; 2--alternative saradc
SYSCON.saradc_ctrl.work_mode = 0;
//ENABLE ADC 0: ADC1 1: ADC2, only work for single SAR mode
SYSCON.saradc_ctrl.sar_sel = 0;
} else if (adc_unit == ADC_UNIT_2) {
// saradc mode sel : 0--single saradc; 1--double saradc; 2--alternative saradc
SYSCON.saradc_ctrl.work_mode = 0;
//ENABLE ADC1 0: SAR1 1: SAR2 only work for single SAR mode
SYSCON.saradc_ctrl.sar_sel = 1;
} else if (adc_unit == ADC_UNIT_BOTH) {
// saradc mode sel : 0--single saradc; 1--double saradc; 2--alternative saradc
SYSCON.saradc_ctrl.work_mode = 1;
} else if (adc_unit == ADC_UNIT_ALTER) {
// saradc mode sel : 0--single saradc; 1--double saradc; 2--alternative saradc
SYSCON.saradc_ctrl.work_mode = 2;
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
static esp_err_t adc_set_atten(adc_unit_t adc_unit, adc_channel_t channel, adc_atten_t atten)
{
ADC_CHECK_UNIT(adc_unit);
if (adc_unit & ADC_UNIT_1) {
RTC_MODULE_CHECK((adc1_channel_t)channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
}
RTC_MODULE_CHECK(atten < ADC_ATTEN_MAX, "ADC Atten Err", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
if (adc_unit & ADC_UNIT_1) {
//SAR1_atten
SET_PERI_REG_BITS(SENS_SAR_ATTEN1_REG, SENS_SAR1_ATTEN_VAL_MASK, atten, (channel * 2));
}
if (adc_unit & ADC_UNIT_2) {
//SAR2_atten
SET_PERI_REG_BITS(SENS_SAR_ATTEN2_REG, SENS_SAR2_ATTEN_VAL_MASK, atten, (channel * 2));
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
void adc_power_always_on(void)
{
portENTER_CRITICAL(&rtc_spinlock);
#if CONFIG_IDF_TARGET_ESP32
SENS.sar_meas_wait2.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
#elif CONFIG_IDF_TARGET_ESP32S2BETA
SENS.sar_power_xpd_sar.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
}
void adc_power_on(void)
{
portENTER_CRITICAL(&rtc_spinlock);
#if CONFIG_IDF_TARGET_ESP32
//The power FSM controlled mode saves more power, while the ADC noise may get increased.
#ifndef CONFIG_ADC_FORCE_XPD_FSM
//Set the power always on to increase precision.
SENS.sar_meas_wait2.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
#else
//Use the FSM to turn off the power while not used to save power.
if (SENS.sar_meas_wait2.force_xpd_sar & SENS_FORCE_XPD_SAR_SW_M) {
SENS.sar_meas_wait2.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
} else {
SENS.sar_meas_wait2.force_xpd_sar = SENS_FORCE_XPD_SAR_FSM;
}
#endif
#elif CONFIG_IDF_TARGET_ESP32S2BETA
//The power FSM controlled mode saves more power, while the ADC noise may get increased.
#ifndef CONFIG_ADC_FORCE_XPD_FSM
//Set the power always on to increase precision.
SENS.sar_power_xpd_sar.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
#else
//Use the FSM to turn off the power while not used to save power.
if (SENS.sar_power_xpd_sar.force_xpd_sar & SENS_FORCE_XPD_SAR_SW_M) {
SENS.sar_power_xpd_sar.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
} else {
SENS.sar_power_xpd_sar.force_xpd_sar = SENS_FORCE_XPD_SAR_FSM;
}
#endif
#endif
portEXIT_CRITICAL(&rtc_spinlock);
}
void adc_power_off(void)
{
portENTER_CRITICAL(&rtc_spinlock);
#if CONFIG_IDF_TARGET_ESP32
//Bit1 0:Fsm 1: SW mode
//Bit0 0:SW mode power down 1: SW mode power on
SENS.sar_meas_wait2.force_xpd_sar = SENS_FORCE_XPD_SAR_PD;
#elif CONFIG_IDF_TARGET_ESP32S2BETA
SENS.sar_power_xpd_sar.force_xpd_sar = SENS_FORCE_XPD_SAR_PD;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
}
esp_err_t adc_set_clk_div(uint8_t clk_div)
{
portENTER_CRITICAL(&rtc_spinlock);
// ADC clock devided from APB clk, 80 / 2 = 40Mhz,
SYSCON.saradc_ctrl.sar_clk_div = clk_div;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t adc_set_i2s_data_source(adc_i2s_source_t src)
{
RTC_MODULE_CHECK(src < ADC_I2S_DATA_SRC_MAX, "ADC i2s data source error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
// 1: I2S input data is from SAR ADC (for DMA) 0: I2S input data is from GPIO matrix
SYSCON.saradc_ctrl.data_to_i2s = src;
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t adc_gpio_init(adc_unit_t adc_unit, adc_channel_t channel)
{
ADC_CHECK_UNIT(adc_unit);
gpio_num_t gpio_num = 0;
if (adc_unit & ADC_UNIT_1) {
RTC_MODULE_CHECK((adc1_channel_t) channel < ADC1_CHANNEL_MAX, "ADC1 channel error", ESP_ERR_INVALID_ARG);
ADC1_CHECK_FUNCTION_RET(adc1_pad_get_io_num((adc1_channel_t) channel, &gpio_num));
ADC1_CHECK_FUNCTION_RET(rtc_gpio_init(gpio_num));
ADC1_CHECK_FUNCTION_RET(rtc_gpio_output_disable(gpio_num));
ADC1_CHECK_FUNCTION_RET(rtc_gpio_input_disable(gpio_num));
ADC1_CHECK_FUNCTION_RET(gpio_set_pull_mode(gpio_num, GPIO_FLOATING));
}
return ESP_OK;
}
esp_err_t adc_set_data_inv(adc_unit_t adc_unit, bool inv_en)
{
portENTER_CRITICAL(&rtc_spinlock);
#if CONFIG_IDF_TARGET_ESP32
if (adc_unit & ADC_UNIT_1) {
// Enable ADC data invert
SENS.sar_read_ctrl.sar1_data_inv = inv_en;
}
if (adc_unit & ADC_UNIT_2) {
// Enable ADC data invert
SENS.sar_read_ctrl2.sar2_data_inv = inv_en;
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if (adc_unit & ADC_UNIT_1) {
// Enable ADC data invert
SENS.sar_reader1_ctrl.sar1_data_inv = inv_en;
}
if (adc_unit & ADC_UNIT_2) {
// Enable ADC data invert
SENS.sar_reader2_ctrl.sar2_data_inv = inv_en;
}
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t adc_set_data_width(adc_unit_t adc_unit, adc_bits_width_t bits)
{
ADC_CHECK_UNIT(adc_unit);
RTC_MODULE_CHECK(bits < ADC_WIDTH_MAX, "ADC bit width error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
#if CONFIG_IDF_TARGET_ESP32
if (adc_unit & ADC_UNIT_1) {
SENS.sar_start_force.sar1_bit_width = bits;
SENS.sar_read_ctrl.sar1_sample_bit = bits;
}
if (adc_unit & ADC_UNIT_2) {
SENS.sar_start_force.sar2_bit_width = bits;
SENS.sar_read_ctrl2.sar2_sample_bit = bits;
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if (adc_unit & ADC_UNIT_1) {
SENS.sar_meas1_ctrl1.sar1_bit_width = bits;
SENS.sar_reader1_ctrl.sar1_sample_bit = bits;
}
if (adc_unit & ADC_UNIT_2) {
SENS.sar_meas2_ctrl1.sar2_bit_width = bits;
SENS.sar_reader2_ctrl.sar2_sample_bit = bits;
}
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
// this function should be called in the critical section
static void adc_set_controller(adc_unit_t unit, adc_controller_t ctrl )
{
#if CONFIG_IDF_TARGET_ESP32
if ( unit == ADC_UNIT_1 ) {
switch( ctrl ) {
case ADC_CTRL_RTC:
SENS.sar_read_ctrl.sar1_dig_force = false; //RTC controller controls the ADC, not digital controller
SENS.sar_meas_start1.meas1_start_force = true; //RTC controller controls the ADC,not ulp coprocessor
SENS.sar_meas_start1.sar1_en_pad_force = true; //RTC controller controls the data port, not ulp coprocessor
SENS.sar_touch_ctrl1.xpd_hall_force = true; // RTC controller controls the hall sensor power,not ulp coprocessor
SENS.sar_touch_ctrl1.hall_phase_force = true; // RTC controller controls the hall sensor phase,not ulp coprocessor
break;
case ADC_CTRL_ULP:
SENS.sar_read_ctrl.sar1_dig_force = false;
SENS.sar_meas_start1.meas1_start_force = false;
SENS.sar_meas_start1.sar1_en_pad_force = false;
SENS.sar_touch_ctrl1.xpd_hall_force = false;
SENS.sar_touch_ctrl1.hall_phase_force = false;
break;
case ADC_CTRL_DIG:
SENS.sar_read_ctrl.sar1_dig_force = true;
SENS.sar_meas_start1.meas1_start_force = true;
SENS.sar_meas_start1.sar1_en_pad_force = true;
SENS.sar_touch_ctrl1.xpd_hall_force = true;
SENS.sar_touch_ctrl1.hall_phase_force = true;
break;
default:
ESP_LOGE(TAG, "adc1 selects invalid controller");
break;
}
} else if ( unit == ADC_UNIT_2) {
switch( ctrl ) {
case ADC_CTRL_RTC:
SENS.sar_meas_start2.meas2_start_force = true; //RTC controller controls the ADC,not ulp coprocessor
SENS.sar_meas_start2.sar2_en_pad_force = true; //RTC controller controls the data port, not ulp coprocessor
SENS.sar_read_ctrl2.sar2_dig_force = false; //RTC controller controls the ADC, not digital controller
SENS.sar_read_ctrl2.sar2_pwdet_force = false; //RTC controller controls the ADC, not PWDET
SYSCON.saradc_ctrl.sar2_mux = true; //RTC controller controls the ADC, not PWDET
break;
case ADC_CTRL_ULP:
SENS.sar_meas_start2.meas2_start_force = false;
SENS.sar_meas_start2.sar2_en_pad_force = false;
SENS.sar_read_ctrl2.sar2_dig_force = false;
SENS.sar_read_ctrl2.sar2_pwdet_force = false;
SYSCON.saradc_ctrl.sar2_mux = true;
break;
case ADC_CTRL_DIG:
SENS.sar_meas_start2.meas2_start_force = true;
SENS.sar_meas_start2.sar2_en_pad_force = true;
SENS.sar_read_ctrl2.sar2_dig_force = true;
SENS.sar_read_ctrl2.sar2_pwdet_force = false;
SYSCON.saradc_ctrl.sar2_mux = true;
break;
case ADC2_CTRL_PWDET:
//currently only used by Wi-Fi
SENS.sar_meas_start2.meas2_start_force = true;
SENS.sar_meas_start2.sar2_en_pad_force = true;
SENS.sar_read_ctrl2.sar2_dig_force = false;
SENS.sar_read_ctrl2.sar2_pwdet_force = true;
SYSCON.saradc_ctrl.sar2_mux = false;
break;
default:
ESP_LOGE(TAG, "adc2 selects invalid controller");
break;
}
} else {
ESP_LOGE(TAG, "invalid adc unit");
assert(0);
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if ( unit == ADC_UNIT_1 ) {
switch( ctrl ) {
case ADC_CTRL_RTC:
SENS.sar_meas1_mux.sar1_dig_force = false; //RTC controller controls the ADC, not digital controller
SENS.sar_meas1_ctrl2.meas1_start_force = true; //RTC controller controls the ADC,not ulp coprocessor
SENS.sar_meas1_ctrl2.sar1_en_pad_force = true; //RTC controller controls the data port, not ulp coprocessor
SENS.sar_hall_ctrl.xpd_hall_force = true; // RTC controller controls the hall sensor power,not ulp coprocessor
SENS.sar_hall_ctrl.hall_phase_force = true; // RTC controller controls the hall sensor phase,not ulp coprocessor
break;
case ADC_CTRL_ULP:
SENS.sar_meas1_mux.sar1_dig_force = false;
SENS.sar_meas1_ctrl2.meas1_start_force = false;
SENS.sar_meas1_ctrl2.sar1_en_pad_force = false;
SENS.sar_hall_ctrl.xpd_hall_force = false;
SENS.sar_hall_ctrl.hall_phase_force = false;
break;
case ADC_CTRL_DIG:
SENS.sar_meas1_mux.sar1_dig_force = true;
SENS.sar_meas1_ctrl2.meas1_start_force = true;
SENS.sar_meas1_ctrl2.sar1_en_pad_force = true;
SENS.sar_hall_ctrl.xpd_hall_force = true;
SENS.sar_hall_ctrl.hall_phase_force = true;
break;
default:
ESP_LOGE(TAG, "adc1 selects invalid controller");
break;
}
} else if ( unit == ADC_UNIT_2) {
switch( ctrl ) {
case ADC_CTRL_RTC:
SENS.sar_meas2_ctrl2.meas2_start_force = true; //RTC controller controls the ADC,not ulp coprocessor
SENS.sar_meas2_ctrl2.sar2_en_pad_force = true; //RTC controller controls the data port, not ulp coprocessor
break;
case ADC_CTRL_ULP:
SENS.sar_meas2_ctrl2.meas2_start_force = false;
SENS.sar_meas2_ctrl2.sar2_en_pad_force = false;
break;
case ADC_CTRL_DIG:
SENS.sar_meas2_ctrl2.meas2_start_force = true;
SENS.sar_meas2_ctrl2.sar2_en_pad_force = true;
break;
case ADC2_CTRL_PWDET:
//currently only used by Wi-Fi
SENS.sar_meas2_ctrl2.meas2_start_force = true;
SENS.sar_meas2_ctrl2.sar2_en_pad_force = true;
break;
default:
ESP_LOGE(TAG, "adc2 selects invalid controller");
break;
}
} else {
ESP_LOGE(TAG, "invalid adc unit");
assert(0);
}
#endif
}
// this function should be called in the critical section
static int adc_convert( adc_unit_t unit, int channel)
{
uint16_t adc_value = 0;
#if CONFIG_IDF_TARGET_ESP32
if ( unit == ADC_UNIT_1 ) {
SENS.sar_meas_start1.sar1_en_pad = (1 << channel); //only one channel is selected.
while (SENS.sar_slave_addr1.meas_status != 0);
SENS.sar_meas_start1.meas1_start_sar = 0;
SENS.sar_meas_start1.meas1_start_sar = 1;
while (SENS.sar_meas_start1.meas1_done_sar == 0);
adc_value = SENS.sar_meas_start1.meas1_data_sar;
} else if ( unit == ADC_UNIT_2 ) {
SENS.sar_meas_start2.sar2_en_pad = (1 << channel); //only one channel is selected.
SENS.sar_meas_start2.meas2_start_sar = 0; //start force 0
SENS.sar_meas_start2.meas2_start_sar = 1; //start force 1
while (SENS.sar_meas_start2.meas2_done_sar == 0) {}; //read done
adc_value = SENS.sar_meas_start2.meas2_data_sar;
} else {
ESP_LOGE(TAG, "invalid adc unit");
return ESP_ERR_INVALID_ARG;
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if ( unit == ADC_UNIT_1 ) {
SENS.sar_meas1_ctrl2.sar1_en_pad = (1 << channel); //only one channel is selected.
while (SENS.sar_slave_addr1.meas_status != 0);
SENS.sar_meas1_ctrl2.meas1_start_sar = 0;
SENS.sar_meas1_ctrl2.meas1_start_sar = 1;
while (SENS.sar_meas1_ctrl2.meas1_done_sar == 0);
adc_value = SENS.sar_meas1_ctrl2.meas1_data_sar;
} else if ( unit == ADC_UNIT_2 ) {
SENS.sar_meas2_ctrl2.sar2_en_pad = (1 << channel); //only one channel is selected.
SENS.sar_meas2_ctrl2.meas2_start_sar = 0; //start force 0
SENS.sar_meas2_ctrl2.meas2_start_sar = 1; //start force 1
while (SENS.sar_meas2_ctrl2.meas2_done_sar == 0) {}; //read done
adc_value = SENS.sar_meas2_ctrl2.meas2_data_sar;
} else {
ESP_LOGE(TAG, "invalid adc unit");
return ESP_ERR_INVALID_ARG;
}
#endif
return adc_value;
}
/*-------------------------------------------------------------------------------------
* ADC I2S
*------------------------------------------------------------------------------------*/
static esp_err_t adc_set_i2s_data_len(adc_unit_t adc_unit, int patt_len)
{
ADC_CHECK_UNIT(adc_unit);
RTC_MODULE_CHECK((patt_len < ADC_PATT_LEN_MAX) && (patt_len > 0), "ADC pattern length error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
if(adc_unit & ADC_UNIT_1) {
SYSCON.saradc_ctrl.sar1_patt_len = patt_len - 1;
}
if(adc_unit & ADC_UNIT_2) {
SYSCON.saradc_ctrl.sar2_patt_len = patt_len - 1;
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
static esp_err_t adc_set_i2s_data_pattern(adc_unit_t adc_unit, int seq_num, adc_channel_t channel, adc_bits_width_t bits, adc_atten_t atten)
{
ADC_CHECK_UNIT(adc_unit);
if (adc_unit & ADC_UNIT_1) {
RTC_MODULE_CHECK((adc1_channel_t) channel < ADC1_CHANNEL_MAX, "ADC1 channel error", ESP_ERR_INVALID_ARG);
}
RTC_MODULE_CHECK(bits < ADC_WIDTH_MAX, "ADC bit width error", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(atten < ADC_ATTEN_MAX, "ADC Atten Err", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
//Configure pattern table, each 8 bit defines one channel
//[7:4]-channel [3:2]-bit width [1:0]- attenuation
//BIT WIDTH: 3: 12BIT 2: 11BIT 1: 10BIT 0: 9BIT
//ATTEN: 3: ATTEN = 11dB 2: 6dB 1: 2.5dB 0: 0dB
uint8_t val = (channel << 4) | (bits << 2) | (atten << 0);
if (adc_unit & ADC_UNIT_1) {
SYSCON.saradc_sar1_patt_tab[seq_num / 4] &= (~(0xff << ((3 - (seq_num % 4)) * 8)));
SYSCON.saradc_sar1_patt_tab[seq_num / 4] |= (val << ((3 - (seq_num % 4)) * 8));
}
if (adc_unit & ADC_UNIT_2) {
SYSCON.saradc_sar2_patt_tab[seq_num / 4] &= (~(0xff << ((3 - (seq_num % 4)) * 8)));
SYSCON.saradc_sar2_patt_tab[seq_num / 4] |= (val << ((3 - (seq_num % 4)) * 8));
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t adc_i2s_mode_init(adc_unit_t adc_unit, adc_channel_t channel)
{
ADC_CHECK_UNIT(adc_unit);
if (adc_unit & ADC_UNIT_1) {
RTC_MODULE_CHECK((adc1_channel_t) channel < ADC1_CHANNEL_MAX, "ADC1 channel error", ESP_ERR_INVALID_ARG);
}
uint8_t table_len = 1;
//POWER ON SAR
adc_power_always_on();
adc_gpio_init(adc_unit, channel);
adc_set_i2s_data_len(adc_unit, table_len);
adc_set_i2s_data_pattern(adc_unit, 0, channel, ADC_WIDTH_BIT_12, ADC_ATTEN_DB_11);
portENTER_CRITICAL(&rtc_spinlock);
if (adc_unit & ADC_UNIT_1) {
adc_set_controller( ADC_UNIT_1, ADC_CTRL_DIG );
}
if (adc_unit & ADC_UNIT_2) {
adc_set_controller( ADC_UNIT_2, ADC_CTRL_DIG );
}
portEXIT_CRITICAL(&rtc_spinlock);
adc_set_i2s_data_source(ADC_I2S_DATA_SRC_ADC);
adc_set_clk_div(SAR_ADC_CLK_DIV_DEFUALT);
// Set internal FSM wait time.
adc_set_fsm_time(ADC_FSM_RSTB_WAIT_DEFAULT, ADC_FSM_START_WAIT_DEFAULT, ADC_FSM_STANDBY_WAIT_DEFAULT,
ADC_FSM_TIME_KEEP);
adc_set_work_mode(adc_unit);
adc_set_data_format(ADC_ENCODE_12BIT);
adc_set_measure_limit(ADC_MAX_MEAS_NUM_DEFAULT, ADC_MEAS_NUM_LIM_DEFAULT);
//Invert The Level, Invert SAR ADC1 data
adc_set_data_inv(adc_unit, true);
return ESP_OK;
}
/*-------------------------------------------------------------------------------------
* ADC1
*------------------------------------------------------------------------------------*/
esp_err_t adc1_pad_get_io_num(adc1_channel_t channel, gpio_num_t *gpio_num)
{
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC1 Channel Err", ESP_ERR_INVALID_ARG);
switch (channel) {
case ADC1_CHANNEL_0:
*gpio_num = ADC1_CHANNEL_0_GPIO_NUM;
break;
case ADC1_CHANNEL_1:
*gpio_num = ADC1_CHANNEL_1_GPIO_NUM;
break;
case ADC1_CHANNEL_2:
*gpio_num = ADC1_CHANNEL_2_GPIO_NUM;
break;
case ADC1_CHANNEL_3:
*gpio_num = ADC1_CHANNEL_3_GPIO_NUM;
break;
case ADC1_CHANNEL_4:
*gpio_num = ADC1_CHANNEL_4_GPIO_NUM;
break;
case ADC1_CHANNEL_5:
*gpio_num = ADC1_CHANNEL_5_GPIO_NUM;
break;
case ADC1_CHANNEL_6:
*gpio_num = ADC1_CHANNEL_6_GPIO_NUM;
break;
case ADC1_CHANNEL_7:
*gpio_num = ADC1_CHANNEL_7_GPIO_NUM;
break;
default:
return ESP_ERR_INVALID_ARG;
}
return ESP_OK;
}
esp_err_t adc1_config_channel_atten(adc1_channel_t channel, adc_atten_t atten)
{
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(atten < ADC_ATTEN_MAX, "ADC Atten Err", ESP_ERR_INVALID_ARG);
adc_gpio_init(ADC_UNIT_1, channel);
adc_set_atten(ADC_UNIT_1, channel, atten);
return ESP_OK;
}
esp_err_t adc1_config_width(adc_bits_width_t width_bit)
{
RTC_MODULE_CHECK(width_bit < ADC_WIDTH_MAX, "ADC bit width error", ESP_ERR_INVALID_ARG);
adc_set_data_width(ADC_UNIT_1, width_bit);
adc_set_data_inv(ADC_UNIT_1, true);
return ESP_OK;
}
static inline void adc1_fsm_disable(void)
{
#if CONFIG_IDF_TARGET_ESP32
//channel is set in the convert function
SENS.sar_meas_wait2.force_xpd_amp = SENS_FORCE_XPD_AMP_PD;
//disable FSM, it's only used by the LNA.
SENS.sar_meas_ctrl.amp_rst_fb_fsm = 0;
SENS.sar_meas_ctrl.amp_short_ref_fsm = 0;
SENS.sar_meas_ctrl.amp_short_ref_gnd_fsm = 0;
SENS.sar_meas_wait1.sar_amp_wait1 = 1;
SENS.sar_meas_wait1.sar_amp_wait2 = 1;
SENS.sar_meas_wait2.sar_amp_wait3 = 1;
#elif CONFIG_IDF_TARGET_ESP32S2BETA
//channel is set in the convert function
SENS.sar_meas1_ctrl1.force_xpd_amp = SENS_FORCE_XPD_AMP_PD;
//disable FSM, it's only used by the LNA.
SENS.sar_amp_ctrl3.amp_rst_fb_fsm = 0;
SENS.sar_amp_ctrl3.amp_short_ref_fsm = 0;
SENS.sar_amp_ctrl3.amp_short_ref_gnd_fsm = 0;
SENS.sar_amp_ctrl1.sar_amp_wait1 = 1;
SENS.sar_amp_ctrl1.sar_amp_wait2 = 1;
SENS.sar_amp_ctrl2.sar_amp_wait3 = 1;
#endif
}
esp_err_t adc1_i2s_mode_acquire(void)
{
//lazy initialization
//for i2s, block until acquire the lock
_lock_acquire( &adc1_i2s_lock );
ESP_LOGD( RTC_MODULE_TAG, "i2s mode takes adc1 lock." );
portENTER_CRITICAL(&rtc_spinlock);
#if CONFIG_IDF_TARGET_ESP32
SENS.sar_meas_wait2.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
//switch SARADC into DIG channel
SENS.sar_read_ctrl.sar1_dig_force = 1;
#elif CONFIG_IDF_TARGET_ESP32S2BETA
SENS.sar_power_xpd_sar.force_xpd_sar = SENS_FORCE_XPD_SAR_PU;
//switch SARADC into DIG channel
SENS.sar_meas1_mux.sar1_dig_force = 1;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t adc1_adc_mode_acquire(void)
{
//lazy initialization
//for adc1, block until acquire the lock
_lock_acquire( &adc1_i2s_lock );
ESP_LOGD( RTC_MODULE_TAG, "adc mode takes adc1 lock." );
portENTER_CRITICAL(&rtc_spinlock);
// for now the WiFi would use ADC2 and set xpd_sar force on.
// so we can not reset xpd_sar to fsm mode directly.
// We should handle this after the synchronization mechanism is established.
//switch SARADC into RTC channel
#if CONFIG_IDF_TARGET_ESP32
SENS.sar_read_ctrl.sar1_dig_force = 0;
#elif CONFIG_IDF_TARGET_ESP32S2BETA
SENS.sar_meas1_mux.sar1_dig_force = 0;
#endif
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t adc1_lock_release(void)
{
RTC_MODULE_CHECK((uint32_t*)adc1_i2s_lock != NULL, "adc1 lock release called before acquire", ESP_ERR_INVALID_STATE );
// for now the WiFi would use ADC2 and set xpd_sar force on.
// so we can not reset xpd_sar to fsm mode directly.
// We should handle this after the synchronization mechanism is established.
_lock_release( &adc1_i2s_lock );
return ESP_OK;
}
int adc1_get_raw(adc1_channel_t channel)
{
uint16_t adc_value;
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
adc1_adc_mode_acquire();
adc_power_on();
portENTER_CRITICAL(&rtc_spinlock);
//disable other peripherals
adc1_hall_enable(false);
adc1_fsm_disable(); //currently the LNA is not open, close it by default
//set controller
adc_set_controller( ADC_UNIT_1, ADC_CTRL_RTC );
//start conversion
adc_value = adc_convert( ADC_UNIT_1, channel );
portEXIT_CRITICAL(&rtc_spinlock);
adc1_lock_release();
return adc_value;
}
2017-04-20 08:13:09 +00:00
void adc1_ulp_enable(void)
{
adc_power_on();
2017-04-20 08:13:09 +00:00
portENTER_CRITICAL(&rtc_spinlock);
adc_set_controller( ADC_UNIT_1, ADC_CTRL_ULP );
// since most users do not need LNA and HALL with uLP, we disable them here
// open them in the uLP if needed.
adc1_fsm_disable();
adc1_hall_enable(false);
2017-04-20 08:13:09 +00:00
portEXIT_CRITICAL(&rtc_spinlock);
}
/*---------------------------------------------------------------
ADC2
---------------------------------------------------------------*/
esp_err_t adc2_pad_get_io_num(adc2_channel_t channel, gpio_num_t *gpio_num)
{
RTC_MODULE_CHECK(channel < ADC2_CHANNEL_MAX, "ADC2 Channel Err", ESP_ERR_INVALID_ARG);
switch (channel) {
case ADC2_CHANNEL_0:
*gpio_num = ADC2_CHANNEL_0_GPIO_NUM;
break;
case ADC2_CHANNEL_1:
*gpio_num = ADC2_CHANNEL_1_GPIO_NUM;
break;
case ADC2_CHANNEL_2:
*gpio_num = ADC2_CHANNEL_2_GPIO_NUM;
break;
case ADC2_CHANNEL_3:
*gpio_num = ADC2_CHANNEL_3_GPIO_NUM;
break;
case ADC2_CHANNEL_4:
*gpio_num = ADC2_CHANNEL_4_GPIO_NUM;
break;
case ADC2_CHANNEL_5:
*gpio_num = ADC2_CHANNEL_5_GPIO_NUM;
break;
case ADC2_CHANNEL_6:
*gpio_num = ADC2_CHANNEL_6_GPIO_NUM;
break;
case ADC2_CHANNEL_7:
*gpio_num = ADC2_CHANNEL_7_GPIO_NUM;
break;
case ADC2_CHANNEL_8:
*gpio_num = ADC2_CHANNEL_8_GPIO_NUM;
break;
case ADC2_CHANNEL_9:
*gpio_num = ADC2_CHANNEL_9_GPIO_NUM;
break;
default:
return ESP_ERR_INVALID_ARG;
}
return ESP_OK;
}
esp_err_t adc2_wifi_acquire(void)
{
//lazy initialization
//for wifi, block until acquire the lock
_lock_acquire( &adc2_wifi_lock );
ESP_LOGD( RTC_MODULE_TAG, "Wi-Fi takes adc2 lock." );
return ESP_OK;
}
esp_err_t adc2_wifi_release(void)
{
RTC_MODULE_CHECK((uint32_t*)adc2_wifi_lock != NULL, "wifi release called before acquire", ESP_ERR_INVALID_STATE );
_lock_release( &adc2_wifi_lock );
ESP_LOGD( RTC_MODULE_TAG, "Wi-Fi returns adc2 lock." );
return ESP_OK;
}
static esp_err_t adc2_pad_init(adc2_channel_t channel)
{
gpio_num_t gpio_num = 0;
ADC2_CHECK_FUNCTION_RET(adc2_pad_get_io_num(channel, &gpio_num));
ADC2_CHECK_FUNCTION_RET(rtc_gpio_init(gpio_num));
ADC2_CHECK_FUNCTION_RET(rtc_gpio_output_disable(gpio_num));
ADC2_CHECK_FUNCTION_RET(rtc_gpio_input_disable(gpio_num));
ADC2_CHECK_FUNCTION_RET(gpio_set_pull_mode(gpio_num, GPIO_FLOATING));
return ESP_OK;
}
esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten)
{
RTC_MODULE_CHECK(channel < ADC2_CHANNEL_MAX, "ADC2 Channel Err", ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(atten <= ADC_ATTEN_11db, "ADC2 Atten Err", ESP_ERR_INVALID_ARG);
adc2_pad_init(channel);
portENTER_CRITICAL( &adc2_spinlock );
//lazy initialization
//avoid collision with other tasks
if ( _lock_try_acquire( &adc2_wifi_lock ) == -1 ) {
//try the lock, return if failed (wifi using).
portEXIT_CRITICAL( &adc2_spinlock );
return ESP_ERR_TIMEOUT;
}
SENS.sar_atten2 = ( SENS.sar_atten2 & ~(3<<(channel*2)) ) | ((atten&3) << (channel*2));
_lock_release( &adc2_wifi_lock );
portEXIT_CRITICAL( &adc2_spinlock );
return ESP_OK;
}
static inline void adc2_config_width(adc_bits_width_t width_bit)
{
portENTER_CRITICAL(&rtc_spinlock);
#if CONFIG_IDF_TARGET_ESP32
//sar_start_force shared with ADC1
SENS.sar_start_force.sar2_bit_width = width_bit;
//cct set to the same value with PHY
SENS.sar_start_force.sar2_pwdet_cct = 4;
portEXIT_CRITICAL(&rtc_spinlock);
//Invert the adc value,the Output value is invert
SENS.sar_read_ctrl2.sar2_data_inv = 1;
//Set The adc sample width,invert adc value,must digital sar2_bit_width[1:0]=3
SENS.sar_read_ctrl2.sar2_sample_bit = width_bit;
#elif CONFIG_IDF_TARGET_ESP32S2BETA
//sar_start_force shared with ADC1
SENS.sar_meas2_ctrl1.sar2_bit_width = width_bit;
//cct set to the same value with PHY
SENS.sar_meas2_mux.sar2_pwdet_cct = 4;
portEXIT_CRITICAL(&rtc_spinlock);
//Invert the adc value,the Output value is invert
SENS.sar_reader2_ctrl.sar2_data_inv = 1;
//Set The adc sample width,invert adc value,must digital sar2_bit_width[1:0]=3
SENS.sar_reader2_ctrl.sar2_sample_bit = width_bit;
#endif
}
static inline void adc2_dac_disable( adc2_channel_t channel)
{
#if CONFIG_IDF_TARGET_ESP32
if ( channel == ADC2_CHANNEL_8 ) { // the same as DAC channel 1
dac_output_set_enable( DAC_CHANNEL_1, false );
} else if ( channel == ADC2_CHANNEL_9 ) {
dac_output_set_enable( DAC_CHANNEL_2, false );
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if ( channel == ADC2_CHANNEL_6 ) { // the same as DAC channel 1
dac_output_set_enable( DAC_CHANNEL_1, false );
} else if ( channel == ADC2_CHANNEL_7 ) {
dac_output_set_enable( DAC_CHANNEL_2, false );
}
#endif
}
//registers in critical section with adc1:
//SENS_SAR_START_FORCE_REG,
esp_err_t adc2_get_raw(adc2_channel_t channel, adc_bits_width_t width_bit, int* raw_out)
{
uint16_t adc_value = 0;
RTC_MODULE_CHECK(channel < ADC2_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
//in critical section with whole rtc module
adc_power_on();
//avoid collision with other tasks
portENTER_CRITICAL(&adc2_spinlock);
//lazy initialization
//try the lock, return if failed (wifi using).
if ( _lock_try_acquire( &adc2_wifi_lock ) == -1 ) {
portEXIT_CRITICAL( &adc2_spinlock );
return ESP_ERR_TIMEOUT;
}
//disable other peripherals
#ifdef CONFIG_ADC_DISABLE_DAC
adc2_dac_disable( channel );
#endif
// set controller
// in critical section with whole rtc module
// because the PWDET use the same registers, place it here.
adc2_config_width( width_bit );
adc_set_controller( ADC_UNIT_2, ADC_CTRL_RTC );
//start converting
adc_value = adc_convert( ADC_UNIT_2, channel );
_lock_release( &adc2_wifi_lock );
portEXIT_CRITICAL(&adc2_spinlock);
*raw_out = (int)adc_value;
return ESP_OK;
}
esp_err_t adc2_vref_to_gpio(gpio_num_t gpio)
{
2019-06-13 07:37:58 +00:00
#if CONFIG_IDF_TARGET_ESP32
int channel;
if(gpio == GPIO_NUM_25){
channel = 8; //Channel 8 bit
}else if (gpio == GPIO_NUM_26){
channel = 9; //Channel 9 bit
}else if (gpio == GPIO_NUM_27){
channel = 7; //Channel 7 bit
}else{
return ESP_ERR_INVALID_ARG;
}
//Configure RTC gpio
rtc_gpio_init(gpio);
rtc_gpio_output_disable(gpio);
rtc_gpio_input_disable(gpio);
rtc_gpio_pullup_dis(gpio);
rtc_gpio_pulldown_dis(gpio);
//force fsm
adc_power_always_on(); //Select power source of ADC
RTCCNTL.bias_conf.dbg_atten = 0; //Check DBG effect outside sleep mode
//set dtest (MUX_SEL : 0 -> RTC; 1-> vdd_sar2)
RTCCNTL.test_mux.dtest_rtc = 1; //Config test mux to route v_ref to ADC2 Channels
//set ent
RTCCNTL.test_mux.ent_rtc = 1;
//set sar2_en_test
SENS.sar_start_force.sar2_en_test = 1;
//set sar2 en force
SENS.sar_meas_start2.sar2_en_pad_force = 1; //Pad bitmap controlled by SW
//set en_pad for channels 7,8,9 (bits 0x380)
SENS.sar_meas_start2.sar2_en_pad = 1<<channel;
2019-06-13 07:37:58 +00:00
#endif
return ESP_OK;
}
/*---------------------------------------------------------------
DAC
---------------------------------------------------------------*/
esp_err_t dac_pad_get_io_num(dac_channel_t channel, gpio_num_t *gpio_num)
{
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
RTC_MODULE_CHECK(gpio_num, "Param null", ESP_ERR_INVALID_ARG);
switch (channel) {
case DAC_CHANNEL_1:
*gpio_num = DAC_CHANNEL_1_GPIO_NUM;
break;
case DAC_CHANNEL_2:
*gpio_num = DAC_CHANNEL_2_GPIO_NUM;
break;
default:
return ESP_ERR_INVALID_ARG;
}
return ESP_OK;
}
static esp_err_t dac_rtc_pad_init(dac_channel_t channel)
{
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
gpio_num_t gpio_num = 0;
dac_pad_get_io_num(channel, &gpio_num);
rtc_gpio_init(gpio_num);
rtc_gpio_output_disable(gpio_num);
rtc_gpio_input_disable(gpio_num);
rtc_gpio_pullup_dis(gpio_num);
rtc_gpio_pulldown_dis(gpio_num);
return ESP_OK;
}
static inline void dac_output_set_enable(dac_channel_t channel, bool enable)
{
RTCIO.pad_dac[channel-DAC_CHANNEL_1].dac_xpd_force = enable;
RTCIO.pad_dac[channel-DAC_CHANNEL_1].xpd_dac = enable;
}
esp_err_t dac_output_enable(dac_channel_t channel)
{
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
dac_rtc_pad_init(channel);
portENTER_CRITICAL(&rtc_spinlock);
dac_output_set_enable(channel, true);
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t dac_output_disable(dac_channel_t channel)
{
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
dac_output_set_enable(channel, false);
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t dac_output_voltage(dac_channel_t channel, uint8_t dac_value)
{
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rtc_spinlock);
//Disable Tone
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_SW_TONE_EN);
//Disable Channel Tone
if (channel == DAC_CHANNEL_1) {
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN1_M);
} else if (channel == DAC_CHANNEL_2) {
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN2_M);
}
//Set the Dac value
if (channel == DAC_CHANNEL_1) {
SET_PERI_REG_BITS(RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_DAC, dac_value, RTC_IO_PDAC1_DAC_S); //dac_output
} else if (channel == DAC_CHANNEL_2) {
SET_PERI_REG_BITS(RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_DAC, dac_value, RTC_IO_PDAC2_DAC_S); //dac_output
}
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t dac_i2s_enable(void)
{
portENTER_CRITICAL(&rtc_spinlock);
SET_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_DAC_DIG_FORCE_M | SENS_DAC_CLK_INV_M);
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
esp_err_t dac_i2s_disable(void)
{
portENTER_CRITICAL(&rtc_spinlock);
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_DAC_DIG_FORCE_M | SENS_DAC_CLK_INV_M);
portEXIT_CRITICAL(&rtc_spinlock);
return ESP_OK;
}
/*---------------------------------------------------------------
HALL SENSOR
---------------------------------------------------------------*/
static inline void adc1_hall_enable(bool enable)
{
#if CONFIG_IDF_TARGET_ESP32
RTCIO.hall_sens.xpd_hall = enable;
#endif
}
static int hall_sensor_get_value(void) //hall sensor without LNA
{
int hall_value = 0;
adc_power_on();
#if CONFIG_IDF_TARGET_ESP32
2019-06-10 07:07:12 +00:00
int Sens_Vp0;
int Sens_Vn0;
int Sens_Vp1;
int Sens_Vn1;
portENTER_CRITICAL(&rtc_spinlock);
//disable other peripherals
adc1_fsm_disable();//currently the LNA is not open, close it by default
adc1_hall_enable(true);
// set controller
adc_set_controller( ADC_UNIT_1, ADC_CTRL_RTC );
// convert for 4 times with different phase and outputs
RTCIO.hall_sens.hall_phase = 0; // hall phase
Sens_Vp0 = adc_convert( ADC_UNIT_1, ADC1_CHANNEL_0 );
Sens_Vn0 = adc_convert( ADC_UNIT_1, ADC1_CHANNEL_3 );
RTCIO.hall_sens.hall_phase = 1;
Sens_Vp1 = adc_convert( ADC_UNIT_1, ADC1_CHANNEL_0 );
Sens_Vn1 = adc_convert( ADC_UNIT_1, ADC1_CHANNEL_3 );
portEXIT_CRITICAL(&rtc_spinlock);
hall_value = (Sens_Vp1 - Sens_Vp0) - (Sens_Vn1 - Sens_Vn0);
#endif
return hall_value;
}
int hall_sensor_read(void)
{
adc_gpio_init(ADC_UNIT_1, ADC1_CHANNEL_0);
adc_gpio_init(ADC_UNIT_1, ADC1_CHANNEL_3);
adc1_config_channel_atten(ADC1_CHANNEL_0, ADC_ATTEN_DB_0);
adc1_config_channel_atten(ADC1_CHANNEL_3, ADC_ATTEN_DB_0);
return hall_sensor_get_value();
}
/*---------------------------------------------------------------
INTERRUPT HANDLER
---------------------------------------------------------------*/
typedef struct rtc_isr_handler_ {
uint32_t mask;
intr_handler_t handler;
void* handler_arg;
SLIST_ENTRY(rtc_isr_handler_) next;
} rtc_isr_handler_t;
static SLIST_HEAD(rtc_isr_handler_list_, rtc_isr_handler_) s_rtc_isr_handler_list =
SLIST_HEAD_INITIALIZER(s_rtc_isr_handler_list);
portMUX_TYPE s_rtc_isr_handler_list_lock = portMUX_INITIALIZER_UNLOCKED;
static intr_handle_t s_rtc_isr_handle;
static void rtc_isr(void* arg)
{
uint32_t status = REG_READ(RTC_CNTL_INT_ST_REG);
rtc_isr_handler_t* it;
portENTER_CRITICAL_ISR(&s_rtc_isr_handler_list_lock);
SLIST_FOREACH(it, &s_rtc_isr_handler_list, next) {
if (it->mask & status) {
portEXIT_CRITICAL_ISR(&s_rtc_isr_handler_list_lock);
(*it->handler)(it->handler_arg);
portENTER_CRITICAL_ISR(&s_rtc_isr_handler_list_lock);
}
}
portEXIT_CRITICAL_ISR(&s_rtc_isr_handler_list_lock);
REG_WRITE(RTC_CNTL_INT_CLR_REG, status);
}
static esp_err_t rtc_isr_ensure_installed(void)
{
esp_err_t err = ESP_OK;
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
if (s_rtc_isr_handle) {
goto out;
}
REG_WRITE(RTC_CNTL_INT_ENA_REG, 0);
REG_WRITE(RTC_CNTL_INT_CLR_REG, UINT32_MAX);
err = esp_intr_alloc(ETS_RTC_CORE_INTR_SOURCE, 0, &rtc_isr, NULL, &s_rtc_isr_handle);
if (err != ESP_OK) {
goto out;
}
out:
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
return err;
}
esp_err_t rtc_isr_register(intr_handler_t handler, void* handler_arg, uint32_t rtc_intr_mask)
{
esp_err_t err = rtc_isr_ensure_installed();
if (err != ESP_OK) {
return err;
}
rtc_isr_handler_t* item = malloc(sizeof(*item));
if (item == NULL) {
return ESP_ERR_NO_MEM;
}
item->handler = handler;
item->handler_arg = handler_arg;
item->mask = rtc_intr_mask;
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
SLIST_INSERT_HEAD(&s_rtc_isr_handler_list, item, next);
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
return ESP_OK;
}
esp_err_t rtc_isr_deregister(intr_handler_t handler, void* handler_arg)
{
rtc_isr_handler_t* it;
rtc_isr_handler_t* prev = NULL;
bool found = false;
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
SLIST_FOREACH(it, &s_rtc_isr_handler_list, next) {
if (it->handler == handler && it->handler_arg == handler_arg) {
if (it == SLIST_FIRST(&s_rtc_isr_handler_list)) {
SLIST_REMOVE_HEAD(&s_rtc_isr_handler_list, next);
} else {
SLIST_REMOVE_AFTER(prev, next);
}
found = true;
free(it);
break;
}
prev = it;
}
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
return found ? ESP_OK : ESP_ERR_INVALID_STATE;
}