2020-03-27 20:41:40 +00:00
|
|
|
|
Notify about health state
|
|
|
|
|
|
=========================
|
|
|
|
|
|
|
2023-01-10 13:45:27 +00:00
|
|
|
|
[⬅️ Go back to main README](../README.md)
|
2020-03-27 20:41:40 +00:00
|
|
|
|
|
2022-02-12 12:05:56 +00:00
|
|
|
|
> ℹ️ **Info**: This script can not be used on its own but requires the base
|
2022-02-11 22:34:39 +00:00
|
|
|
|
> installation. See [main README](../README.md) for details.
|
2021-05-03 13:07:50 +00:00
|
|
|
|
|
2020-03-27 20:41:40 +00:00
|
|
|
|
Description
|
|
|
|
|
|
-----------
|
|
|
|
|
|
|
|
|
|
|
|
This script is run from scheduler periodically, sending notification on
|
|
|
|
|
|
health related events:
|
|
|
|
|
|
|
2023-01-20 13:24:20 +00:00
|
|
|
|
* high CPU load
|
2021-11-13 20:29:33 +00:00
|
|
|
|
* voltage jumps up or down more than configured threshold or drops below limit
|
2020-03-27 20:41:40 +00:00
|
|
|
|
* power supply failed or recovered
|
|
|
|
|
|
* temperature is above or below threshold
|
|
|
|
|
|
|
|
|
|
|
|
Note that bad initial state will not trigger an event.
|
|
|
|
|
|
|
2023-01-20 13:24:20 +00:00
|
|
|
|
Monitoring CPU load works on all devices. Other than that only sensors
|
|
|
|
|
|
available in hardware can be checked. See what your hardware supports:
|
2020-03-27 20:41:40 +00:00
|
|
|
|
|
2022-05-11 07:57:09 +00:00
|
|
|
|
/system/health/print;
|
2020-03-27 20:41:40 +00:00
|
|
|
|
|
2021-06-17 13:23:51 +00:00
|
|
|
|
### Sample notifications
|
|
|
|
|
|
|
2023-01-20 13:24:20 +00:00
|
|
|
|
#### CPU load
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-06-17 13:23:51 +00:00
|
|
|
|
#### Voltage
|
|
|
|
|
|
|
2023-01-20 13:24:20 +00:00
|
|
|
|
|
2021-06-17 13:23:51 +00:00
|
|
|
|
|
|
|
|
|
|
#### Temperature
|
|
|
|
|
|
|
2023-01-20 13:24:20 +00:00
|
|
|
|
|
|
|
|
|
|
|
2021-06-17 13:23:51 +00:00
|
|
|
|
|
|
|
|
|
|
#### PSU state
|
|
|
|
|
|
|
2023-01-20 13:24:20 +00:00
|
|
|
|
|
|
|
|
|
|
|
2021-06-17 13:23:51 +00:00
|
|
|
|
|
2020-03-27 20:41:40 +00:00
|
|
|
|
Requirements and installation
|
|
|
|
|
|
-----------------------------
|
|
|
|
|
|
|
|
|
|
|
|
Just install the script and create a scheduler:
|
|
|
|
|
|
|
|
|
|
|
|
$ScriptInstallUpdate check-health;
|
2022-05-11 07:57:09 +00:00
|
|
|
|
/system/scheduler/add interval=1m name=check-health on-event="/system/script/run check-health;" start-time=startup;
|
2020-03-27 20:41:40 +00:00
|
|
|
|
|
|
|
|
|
|
Configuration
|
|
|
|
|
|
-------------
|
|
|
|
|
|
|
2021-06-18 08:24:33 +00:00
|
|
|
|
The configuration goes to `global-config-overlay`, these are the parameters:
|
2020-03-27 20:41:40 +00:00
|
|
|
|
|
|
|
|
|
|
* `CheckHealthTemperature`: an array specifying temperature thresholds for sensors
|
2021-11-13 20:29:33 +00:00
|
|
|
|
* `CheckHealthVoltageLow`: value (in volt*10) giving a hard lower limit
|
2020-03-27 20:41:40 +00:00
|
|
|
|
* `CheckHealthVoltagePercent`: percentage value to trigger voltage jumps
|
|
|
|
|
|
|
2022-09-23 13:07:30 +00:00
|
|
|
|
Also notification settings are required for
|
|
|
|
|
|
[e-mail](mod/notification-email.md),
|
2021-11-16 15:03:25 +00:00
|
|
|
|
[matrix](mod/notification-matrix.md) and/or
|
2021-11-16 15:03:43 +00:00
|
|
|
|
[telegram](mod/notification-telegram.md).
|
2020-03-27 20:41:40 +00:00
|
|
|
|
|
|
|
|
|
|
---
|
2023-01-10 13:45:27 +00:00
|
|
|
|
[⬅️ Go back to main README](../README.md)
|
|
|
|
|
|
[⬆️ Go back to top](#top)
|
