routeros-scripts/doc/hotspot-to-wpa.md

91 lines
3.1 KiB
Markdown
Raw Normal View History

2020-03-27 20:46:08 +00:00
Use WPA2 network with hotspot credentials
=========================================
[◀ Go back to main README](../README.md)
> **Info**: This script can not be used on its own but requires the base
2022-02-11 22:34:39 +00:00
> installation. See [main README](../README.md) for details.
2020-03-27 20:46:08 +00:00
Description
-----------
RouterOS supports an unlimited number of MAC address specific passphrases
for WPA2 encrypted wifi networks via access list. The idea of this script
is to transfer hotspot credentials to MAC address specific WPA2 passphrase.
Requirements and installation
-----------------------------
You need a properly configured hotspot on one (open) SSID and a WP2 enabled
SSID with suffix "`-wpa`".
Then install the script:
$ScriptInstallUpdate hotspot-to-wpa;
Configure your hotspot to use this script as `on-login` script:
/ ip hotspot user profile set on-login=hotspot-to-wpa [ find ];
### Automatic cleanup
With just `hotspot-to-wpa` installed the mac addresses will last in the
access list forever. Install the optional script for automatic cleanup:
$ScriptInstallUpdate hotspot-to-wpa-cleanup,lease-script;
Create a scheduler:
/ system scheduler add interval=1d name=hotspot-to-wpa-cleanup on-event="/ system script run hotspot-to-wpa-cleanup;" start-time=startup;
And add the lease script to your wpa interfaces' dhcp server:
/ ip dhcp-server set lease-script=lease-script [ find where name~"wpa" ];
2020-03-27 20:46:08 +00:00
Configuration
-------------
On first run a disabled access list entry acting as marker (with comment
"`--- hotspot-to-wpa above ---`") is added. Move this entry to define where new
entries are to be added.
Create hotspot login credentials:
/ ip hotspot user add add comment="Test User 1" name=user1 password=v3ry;
/ ip hotspot user add add comment="Test User 2" name=user2 password=s3cr3t;
Additionally templates can be created to give more options for access list:
* `action`: set to `reject` to ignore logins on that hotspot
* `private-passphrase`: do **not** use passphrase from hotspot's user
credentials, but given one - or unset (use default passphrase) with
special word `ignore`
* `ssid-regexp`: set a different SSID regular expression to match
* `vlan-id`: connect device to specific VLAN
* `vlan-mode`: set the VLAN mode for device
For a hotspot called `example` the template could look like this:
/ caps-man access-list add comment="hotspot-to-wpa template example" disabled=yes private-passphrase="ignore" ssid-regexp="^example\$" vlan-id=10 vlan-mode=use-tag;
The same settings are available in hotspot user's comment and take precedence
over the template settings:
/ ip hotspot user add comment="private-passphrase=ignore, ssid-regexp=^example\\\$, vlan-id=10, vlan-mode=use-tag" name=user password=v3ry-s3cr3t;
Usage and invocation
--------------------
2020-03-27 20:46:08 +00:00
Now let the users connect and login to the hotspot. After that the devices
(identified by MAC address) can connect to the WPA2 network, using the
passphrase from hotspot credentials.
See also
--------
* [Run other scripts on DHCP lease](lease-script.md)
2020-03-27 20:46:08 +00:00
---
[◀ Go back to main README](../README.md)
[▲ Go back to top](#top)