1.7 KiB
1.7 KiB
Raspberry Pi Pico USB-UART Bridge
This is a fork of https://github.com/Noltari/pico-uart-bridge and a pull request which takes too long time to include. Some fixes applied by myself for a successful build.
This program bridges the Raspberry Pi Pico HW UARTs to two independent USB CDC serial devices in order to behave like any other USB-to-UART Bridge controllers.
Disclaimer
This software is provided without warranty, according to the MIT License, and should therefore not be used where it may endanger life, financial stakes, or cause discomfort and inconvenience to others.
Raspberry Pi Pico Pinout
UART0:
| Raspberry Pi Pico GPIO | Function |
|---|---|
| GPIO0 (Pin 1) | TX |
| GPIO1 (Pin 2) | RX |
| GPIO2 (Pin 4) | CTS |
| GPIO3 (Pin 5) | RTS |
| GPIO4 (Pin 6) | DTR |
| GPIO5 (Pin 7) | DSR |
UART1:
| Raspberry Pi Pico GPIO | Function |
|---|---|
| GPIO8 (Pin 11) | TX |
| GPIO9 (Pin 12) | RX |
| GPIO10 (Pin 14) | CTS |
| GPIO11 (Pin 15) | RTS |
| GPIO12 (Pin 16) | DTR |
| GPIO13 (Pin 17) | DSR |
Optional Hardware Flow and Line control
Hardware Flow-control (RTS/CTS) is disabled by default, but can be compiled in by running:
cmake -DFLOW_CONTROL .
make
Line control (DTR/DSR) is disabled by default, but can be compiled in by running:
cmake -DLINE_CONTROL .
make
To enable both:
cmake -DLINE_CONTROL -DFLOW_CONTROL .
make