Crash_Override/esp32_bluetooth_classic_sniffer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
esp32_bluetooth_classic_sni.../host_stack/bluekitchen/CHANGELOG.md
Matheus Eduardo Garbelini c1fc3f84e3 Step 1 Update
2021-09-06 09:45:23 +08:00

38 KiB
Raw Blame History

Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

Unreleased

Added

  • HCI: btstack_transport_sco.h allows to support SCO over physical PCM/I2S interface (HAVE_SCO_TRANSPORT)
  • HCI: add hci_sniff_subrating command
  • POSIX: btstack_transport_sco_i2s_test_bridge.c implements SCO transport interface for UART-to-I2S test bridge
  • btstack_uart: btstack_uart_t interface extends btstack_uart_block_t:
    • support sending and receiving SLIP frames for HCI H5
    • support odd parity
    • hci_transport_h4 and chipset drivers have new functions to provide btstack_uart_t
  • btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing btstack_uart_block drivers.
  • hci_transport: add parity field and pass on to btstack_uart_t in h4 and h5
  • GATT Client: Battery Service Client
  • GATT Client: Device Information Service Client
  • GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host
  • GATT Client: Scan Parameters Service Client
  • GATT Server: Scan Parameters Service Server
  • GAP: support scan page configuration with gap_set_page_scan_activity and gap_set_page_scan_type
  • GAP: support sniff subrating with `gap_sniff_subrating_configure
  • GAP: support QoS setup with gap_qos_set
  • AVRCP: new field button_pressed in AVRCP_SUBEVENT_OPERATION
  • AVRCP: AVRCP_SUBEVENT_OPERATION emitted for button release
  • AVRCP Controller: avrcp_controller_start_press_and_hold_cmd helps to support device buttons
  • AVRCP Controller: reassemble fragmented AVCTP packets
  • AVDTP: avdtp_register_media_config_validator allows to validate media codec configuration
  • A2DP Source: ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG disables auto config. Requires call to `a2dp_source_set_config_{CODEC}'

Fixed

  • GAP: calculate IO Cap AuthReq Bondable Mode based on gap_ssp_set_authentication_requirement and gap_set_bondable_mode
  • GAP: only store link key for ssp if remote side has set bondable in io cap auth requirements as well
  • GAP: allow to disable link supervision timeout
  • GAP: fix gap_connect after gap_connect_cancel
  • GAP: re-configure advertisements after power cycle
  • HCI: handle start inquiry failure
  • L2CAP: fix create outgoing connection triggered in hci disconnect event callback
  • L2CAP: return unknown mandatory option in config response
  • AVDTP: fix spelling avdtp_set_preferred_sampling_frequency
  • AVRCP Target: fix notification changed event
  • HFP: Emit Audio Connection Released on SLC Release, e.g. remote power off
  • HFP HF: only emit single event for RING and AG Status updates
  • HFP AG: fix audio connection setup for in-band ringtone on incoming connection
  • HFP: fix audio connection setup by HF if codec negotiation is supported

Changed

  • HCI: config I2S for BCM Controllers if ENABLE_SCO_OVER_PCM, reduce bit clock to 256/512 kHz
  • btstack_uart_posix: supports SLIP frames and replaces btstack_uart_block_posix
  • hci_transport_h5: new more performant H5 implementation that requires btstack_uart_t driver with SLIP support.
  • POSIX Ports: use new btstack_uart_posix implementation
  • posix-h5/posix-h5-bcm: use even parity for UART
  • Port Archive: moved ports that are not recommended for new designs to port/archive folder:
    • MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB
    • Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general
    • PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while.
  • Run Loop Base: functionality used in most platform run loop implementations
    • code from btstack_run_loop_base.c moved into btstack_run_loop.c to minimize changes to build systems
    • btstack_run_loop_base.c is a placeholder and can be removed from build
  • HCI Dump: replace monolithic hci_dump.c (with many #ifdefs) into dispatcher with platform-specific implementations:
    • posix/hci_dump_posix_fs - writes binary log file
    • posix/hci_dump_stdout - log to console using printf with local system time
    • embedded/hci_dump_embedded_stdout - log to console using printf
    • embedded/hci_dump_segger_stdout - log to RTT console using SEGGER_printf
    • embedded/hci_dump_segger_binary - writes binary log over RTT to host
  • Nordic SPP Service Server: use GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED and GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED events instead of callback, and RFCOMM_DATA_PACKET for received data
  • u-blox SPP Service Server: use GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED and GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED events instead of callback, and RFCOMM_DATA_PACKET for received data
  • HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release
  • Examples: use btstack_event.h getters instead of direct array access, use enum to compare status codes
  • HFP: provide acl_handle in events to identify connection
  • HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h
  • GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor
  • GATT Server: Allow ATT Read Callback to return custom ATT Error Code
  • HID: Move src/classic/hid.h into src and prefix with btstack_ to use it with BLE and avoid name clashes
  • SM: start pairing as Central for already encrypted connection on Slave Security Request
  • GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT
  • GAP: only store link key if it allows requested security level
  • GAP: abort SSP pairing if MITM protection required but not possible

Release v1.3.2

Added

  • GAP: support for Classic Out-of-Band (OOB) pairing via gap_ssp_remote_oob_data with ENABLE_CLASSIC_OOB_PAIRING
  • GAP: read local OOB data on start and on call to gap_ssp_generate_oob_data, provided via GAP_EVENT_LOCAL_OOB_DATA
  • HID Host: add profile, update hid_host_demo.c example

Fixed

  • L2CAP: make handling of HCI disconnect more robust
  • AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect
  • AVRCP: fix issue when Controller and Target send at the same time

Changed

  • A2DP, AVDTP: use a2dp_source_set_config_{TYPE} and avdtp_config{TYPE}_store to avoid large number of parameters

Release v1.3

Added

  • CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz
  • BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz
  • SDP Client RFCOMM: add sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid
  • HFP: ENABLE_HFP_AT_MESSAGES lets HFP emit HFP_SUBEVENT_AT_MESSAGE_SENT and HFP_SUBEVENT_AT_MESSAGE_RECEIVED
  • A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC
  • A2DP + AVDTP Source: allow to send media packet with avdtp_source_stream_send_media_packet and a2dp_source_stream_send_media_packet
  • A2DP + AVDTP Source: add avdtp_source_stream_send_media_payload_rtp and a2dp_source_stream_send_media_payload_rtp
  • A2DP Source: emit A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE
  • A2DP Source: allow to configure endpoints by calling a2dp_source_set_config_{TYPE} during SEP discovery with SBC fallback

Fixed

  • HCI: keep le connecting request on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start()
  • L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1)
  • HFP AG/HSP AG: avoid connecting to remote service with same role
  • A2DP Source: support multiple Stream Endpoints with different Media Codec types
  • A2DP Source: emit codec configure event with reconfigure flag set on reconfigure
  • GATT Compiler: support multiple instances of the same service

Changed

  • GAP: provide Link Type parameter to incoming connection filter for gap_register_classic_connection_filter
  • HFP/GOEP Client/AVDTP/A2DP: return SDP_SERVICE_NOT_FOUND if no suitable SDP record is found
  • AVDTP Source: avdtp_source_stream_send_media_payload includes SBC Header and was deprecated
  • AVDTP/A2DP: use avdtp_channel_mode_t in A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION
  • A2DP: fix events and use a2dp_cid, local_seid, remote_seid field names in A2DP sub-events
  • GATT Client: Skip MTU exchange after MTU exchange on ATT Server
  • Ports: STM32-F103RB Nucleo + CC256x port removed
  • ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos

Release v1.2.1

Fixed

  • L2CAP: use connection handle for channel lookups
  • L2CAP: forward data only in open state

Changed

  • L2CAP: check packet size against local mtu for classic basic channels

Release v1.2

Fixed

  • L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient
  • SM: fix update of sc flag for re-encrypted connection in peripheral role
  • SM: send security request on re-connect if bonded and ENABLE_LE_PROACTIVE_AUTHENTICATION is defined
  • ESP32: fix audio sink driver

Added

  • GAP: gap_delete_bonding removes device from LE Resolving List and from discards LE bonding information
  • GATT Client: delete bonding information if re-encryption fails and ENABLE_LE_PROACTIVE_AUTHENTICATION is not defined
  • GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests
  • SM: emit events for re-encryption started/complete when bonding information is available

Changed

  • AVRCP Controller: allow to send multiple absolute volume commands without waiting for response.
  • GAP: replaced ENABLE_LE_CENTRAL_AUTO_ENCRYPION with ENABLE_LE_PROACTIVE_AUTHENTICATION

Changes October 2020

Fixed

  • AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices
  • AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection
  • SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled
  • SM: set LinkKey flag to request CTKD if enabled
  • SM: store CTKD key with Public Identity Address
  • SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication
  • SM: start SMP Timeout when sending Security Request
  • HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command
  • HCI: fix reject of LE remote connection param request via HCI

Added

  • GAP: add gap_get_link_key_for_bd_addr
  • GAP: add gap_bonded to check if bonding information is available for active connection
  • SM: support h7 for CTKD

Changed

  • SM: Cross-Transport Key Derivation requires ENABLE_CROSS_TRANSPORT_KEY_DERIVATION now
  • SM: block connection if encryption fails for bonded devices as Central
  • SM: support pairing as Central after failed re-ecnryption

Release v1.1

Fixed

  • AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record

Added

Changed

Changes September 2020

Fixed

  • HFP: fix parsing of ranges e.g. in +CIND responses
  • AVDTP, AVRCP: fix bugs due to transaction id overrun
  • A2DP Source: fix issues with stream configuration by sink
  • hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output

Added

  • btstack_ring_buffer: add btstack_ring_buffer_reset to reset it to initial state/empty
  • GAP: Support for address resolution of resolvable private addresses by Controller with ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION

Changed

  • AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy
  • HSP, HFP: allow to configure usable SCO packet types
  • cc256x: update CC256xC init script to v1.4
  • A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability

Changes August 2020

Fixed

  • ESP32: fix authentication for incoming Secure Connections
  • AVDTP: Fix forwarding of Delay reports
  • STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE
  • tool/create_packet_log: basic support for 16-bit Unicode log files from Windows

Added

  • btstack_run_loop_base: added btstack_run_loop_base_dump_timer
  • GAP: request role change for classic connection via gap_request_role
  • GAP: LE Whitelist API with gap_le_whitelist_x with x = add, remove, clear and new gap_connect_with_whitelist
  • SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready()
  • BNEP lwIP: add bnep_lwip_connect to establish BNEP connection and manage lwIP network interface
  • New btstack_linked_queue utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations
  • btstack_tlv_posix: add btstack_tlv_posix_deinit
  • New btpclient for use with auto-pts project

Changed

  • GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS)
  • GAP: 'gap_auto_connect_x' API deprecated. Please direclty manage LE Whitelist with gap_le_whitelist_* functions and call gap_connect_with_whitelist instead
  • example/hid_host_demo: try to become master for incoming connections
  • btstack_run_loop: use btstack_assert instead of local while(true)
  • att_db_util: allow to reset att_db via att_db_util_init

Changes July 2020

Fixed

  • AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported
  • AVDTP: handle concurrent signaling establishment with reject and retry

Added

  • example/hid_host_demo: support reconnect from HID device
  • Crypto: support software AES128 for AES-CCM operations
  • AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums
  • btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback
  • AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively
  • GAP: Provide gap_get_role to query master/slave role for HCI connection handle
  • GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote

Changed

  • GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec

Changes June 2020

Fixed

  • HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands
  • SM: Fix validation of confirm value for secure connection Passkey entry
  • AVRCP: handle concurrent signaling establishment with reject and retry

Added

  • GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS)
  • GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS)
  • Windows port for Dialog DA14585 connected via serial port

Changes

  • CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous

Changes May 2020

Fixed

  • hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections
  • pbap_client: fix PBAP UUID len on connect message
  • SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one
  • A2DP Source: only connect to remote sink stream endpoints
  • btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash
  • hsp_hs: fix disconnect if audio not connected
  • hsp_ag: fix accept incoming connection

Added

  • example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing
  • GAP: gap_set_security_level sets required security level for incoming and outgoing connections
  • cc256x: allow to specify power vector for each modulation type
  • FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit
  • SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode
  • GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable

Changed

  • L2CAP ERTM: send extended features request only once per HCI connection

Changes April 2020

Fixed

  • hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode
  • HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes

Added

  • GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections
  • example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse
  • HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet

Changed

  • Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready
  • esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c
  • att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len

Changes March 2020

Fixed

  • GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan()
  • HCI: only send HCI Read Local Encryption Key Size if supported by Controller

Added

  • GATT Client: allow to register for any notification/indication and/or any connection
  • HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands
  • chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel)
  • btstack_util: added btstack_replace_bd_addr_placeholder

Changed

  • AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications
  • SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations

Changes Februar 2020

Fixed

  • AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED
  • HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event

Changed

  • hid_host_mode: allow sniff mode

Added

  • port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB

Changes January 2020

Fixed

  • L2CAP ERTM: avoid read-after-free on decline of incoming connection
  • GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors
  • att_db_util: fix realloc of att db buffer for large attributes
  • btstack_tlv_posix: only keep last value in memory, fix delete operation
  • l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported())

Added

  • att_db_util: provide GATT Database Hash via att_db_util_hash_calc
  • GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic
  • ATT Server: validate request pdu length

Changed

  • Crypto: update AES-CMAC implementation to access all message bytes sequentially

Changes December 2019

Fixed

  • example/pan_lwip_http_server: use Network Access Point, CoD
  • sm: emit pairing complete in master role when no keys are distributed / bonding disabled

Added

Changed

  • Updated CC256x initscript: CC256xC v1.3
  • ESP32: add CMake project files

Changes November 2019

Fixed

  • AVDTP Source: return correct avdtp_cid and local_seid in AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW
  • L2CAP: send LE Data Channel SDUs round robin with other data
  • L2CAP ERTM: send ERTM I-frames round robin with other data

Added

  • ATT Server: return error if request to send now for Notification or Indication already registered
  • Linked List: return if item was added for btstack_linked_list_add[_tail]
  • btstack_run_loop_remove: return bool true if timer/data source was removed
  • segger-rtt: allow to configure with SEGGER_RTT_PACKETLOG_* directives, update to v6.54
  • GAP: support setting Link Supervision Timetout for outgoing Classic connections using gap_set_link_supervision_timeout
  • lwip: add download test files to http server demo

Changed

  • Linked List: return bool true if item was removed

Changes October 2019

Fixed

Added

  • btstack_bool.h: provide boolean type 'bool' via <stdbool.h> or as backport
  • provide btstack_assert(condition)
  • H4 Transport: avoid calling hci_transport_h4_trigger_next_read when transport is closed

Changed

  • libusb and posix ports: store bonding information in TLV

Changes September 2019

Fixed

  • L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm
  • L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote
  • GATT Client: allow Write Without Response independent of other requests

Added

  • GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter
  • GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits GAP_EVENT_RSSI_MEASUREMENT

Changed

  • Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h
  • bluetooth.h: extract internal defintitions to respective protocol layers
  • Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2)

Changes August 2019

Fixed

  • POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days
  • RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection
  • RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM)
  • L2CAP ERTM: stop timers on disconnect
  • L2CAP ERTM: fix sending of segmented SDUs
  • L2CAP ERTM: handle unsupported Information Response
  • SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role

Added

  • btstack_run_loop_base: portable implementation of timer and data source management as base for platform specific implementations

Changed

  • FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups
  • L2CAP ERTM: handle invalid Information Response (assume no extended features supported)
  • POSIX: use monotonic clock as timebase if available
  • HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed
  • HCI: Read Encryption Key Size after encryption was enabled
  • Errata 11838:
    • GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max)
    • GAP: validate encryption key size to emit GAP Security Levels

Changes July 2019

Fixed

  • SM: Fixed regression introduced in f3582630
  • L2CAP: avoid reading l2cap signaling command len out of bounds
  • HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms)

Changed

  • SM: Start encryption upon receiving slave securiy request if bonded
  • hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client

Changes June 2019

Changed

  • FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined
  • BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED
  • Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate suppport for GATT over BR/EDR

Fixed

  • BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_*
  • libusb: avoid use-after-free for SCO packets on disconnect

Added

  • example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service
  • platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP
  • ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server

Changes May 2019

Changed

  • ESP32: Configure SCO over HCI after power up
  • btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD is defined, an explicit delete field is used to indicate an invalid entry.

Fixed

  • SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer)

Added

  • gatt_client: emit query complete event for signed write operation
  • hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND

Changes April 2019

Changed

  • ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release

Fixed

  • hci: pad LE Scan response with zeroes
  • SM: store local CSRK
  • ATT DB: call write callback for validated signed writes
  • ATT Server: abort signed write validation on incoming new request
  • Bluetooth SIG web scraping tools updated
  • libusb: compiles for FreeBSD

Added

Changes March 2019

Changed

  • use Makefile for stm32-f4discovery-cc256x port
  • le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get

Fixed

  • SM: Use provided authentication requirements in slave security request

Added

  • port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone
  • SM: Track if connection encryption is based on LE Secure Connection pairing
  • ATT DB: Validate if connection encrypted is based on SC if requested
  • att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag
  • GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags
  • ESP32: erase nvs flash is newer nvs version found
  • libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example
  • port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304

Changes February 2019

Changed

  • example/a2dp_sink_demo: use linear resampling to fix sample rate drift
  • btstack_audio: split interface into sink and source

Fixed

  • Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key
  • SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role

Added

  • example/a2dp_sink_demo: add target role, support volume control on both devices
  • example/audio_duplex: playback audio audio source on audio sink (test audio path)
  • btstack_audio_embedded: implement audio source path

Changes January 2019

Changed

  • L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED
  • RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers

Added

  • L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore
  • L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t
  • HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT
  • ad_parser: validate data element length fields in ad_iterator_has_more
  • Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle

Fixed

  • HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment
  • POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux)
  • Crypto: directly process queued crypto operation on HCI result

Changes December 2018

Added

  • SM: generate and store ER / IR keys in TLV, unless manually set by application
  • hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up

Fixed

  • SM: fix internal buffer overrun during random address generation

Changes November 2018

Added

  • GAP: gap_le_connection_interval provides connection interval for conn handle
  • Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation.
  • uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation.
  • SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices
  • SM: generate and store ER / IR keys in TLV, unless manually set by application

Fixed

  • SM: prevent random address updates if gap_random_address_set was used
  • SM: fix internal buffer overrun that can cause storing of bonding information to fail
  • SM: ignore Slave Security Request after sending own Pairing Request
  • L2CAP: fix use after free on disconnect if ERTM is enabled
  • HFP: Handle multiple commands/responses in single RFCOMM packet
  • Memory Pools: clear all buffers before use

Changes October 2018

Added

  • SDP Server: queue incoming connections when already connected instead of rejecting them
  • GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general.
  • HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse.

Fixed

  • HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry
  • L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist
  • L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length
  • L2CAP ERTM: fix memory corruption triggered if local_mtu > mps
  • L2CAP ERTM: fix outgoing fragment management
  • HFP: decline incoming RFCOMM connection after outgoing connection was started
  • AVRCP: fix crash on disconnect of connection established by remote

Changes September 2018

Fixed

  • HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled
  • L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled
  • L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly
  • L2CAP: Check can send now before sending extended information requeste needed for ERTM mode
  • L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request
  • RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send
  • RFCOMM: Avoid use-after-free on channel finalize
  • GATT Client: stop timer on disconnect - fixes use after free / crash

Added

  • A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency)
  • 3rd-party: yxml is used for PBAP vCard list parsing
  • cc256xC: new v1.1 init scripts

Changes August 2018

Added

  • PBAP: added pbap_get_phonebook_size() to get phonebook entry count

Fixed

  • GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices.
  • SM: fix pairing for Secure Connections with Bonding if remote sends additional keys
  • SM: drop LTK flag from Pairing Response for Secure Connections
  • L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST

Changes June 2018

Added

  • btstack_audio.h: application level API for audio playback and recording
  • embedded/hal_audio.h: low-level API for audio playback and recording
  • HID Device: hid_device_connect(..) function
  • ESP32: implement hal_audio
  • DA14585: support for Dialog Semiconductor DA14585 LE-only controller
  • Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi

Changed

  • Errata 10734:
    • SM: Generate new EC Public Keypair after each pairing
    • SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error)
  • btstack.h: only include classic headers if ENABLE_CLASSIC is defined
  • windows: ignore virtual Bluetooth adapter provided by VMware
  • Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE

Changes June 2018

Fixed

  • HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC
  • ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect
  • AVRCP Controller: fix parsing of now playing info

Changed

  • ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered

Added

  • ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete

Changes May 2018

Added

  • GAP: re-encrypt outgoing connection if bonded
  • ATT Server: wait until re-encryption is complete
  • GATT Client: wait until re-encryption is complete
  • ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication
  • GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error

Changed

  • ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead

Fixed

  • SM: Fix LE Secure Connection pairing in Central role
  • le_device_db_tlv: fix seq nr management
  • SM: improve le_device_db lookup and storing of IRK
  • GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics
  • RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA

Changes April 2018

Added

  • Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh)
  • SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections
  • Embedded: support btstack_stdin via SEGGER RTT

Changed

  • att_db_util: added security requirement arguments to characteristic creators
  • SM: use btstack_crypto for cryptographpic functions
  • GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption)

Fixed

  • HFP: fix answer call command
  • HCI: fix buffer overrun in gap_inquiry_explode
  • SDP: free service record item on sdp_unregister_service

Changes March 2018

Added

  • GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections
  • ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c
  • ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated

Fixed

  • RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1)
  • HSP HS: accept incomming SCO connection
  • SM: fix iteration over LE Device DB entries for bonding and address resolving
  • SM: store pairing information only if both devices have requested bonding

Changes February 2018

Added

  • GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE
  • SM: new event SM_EVENT_PAIRING_COMPLETE
  • GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done
  • GAP: add gap_delete_all_link_keys

Changed

  • GATT Client: round robin for multiple connections
  • ATT Dispatch: round robin for ATT Server & GATT Client
  • L2CAP: round robin for all L2CAP channels (fixed and dynamic)
  • btstack_link_key_db: addition functions for link key iteration
  • GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up
  • CSR: set all keys in psram instead of default

Fixed

  • tc3556x: fix startup after baud rate change

Changes January 2018

Added

  • Port for Windows with Zephyr HCI Firmware connected via serial port
  • em9304: upload patch containers during HCI bootup
  • Makefile for STM32-F4Discovery port
  • support for console out via SEGGER RTT
  • LE Data Channels example in BTstack and iOS example on GitHub
  • LE Streamer Client can send as fast as possbile as well
  • L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu

Changed

  • HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave)
  • GAP: gap_set_connection_parameters includes scan interval and window params
  • GATT Client: GATT_EVENT_MTU indicates max MTU
  • ATT DB Util: attribute handle is returned for new Services and Characteristics

Fixed

  • Windows: retry serial port operations if not all bytes have been read/written
  • HFP: avoid buffer overflows setting up messages
  • SBC Decoder: improved error handling for invalid SBC audio data
  • GAP: fix Connection Parameter Response in Central role
  • ATT DB Util: update pointer to database in case of realloc
  • GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128
  • GAP: release HCI Connnection after gap_le_conne
  • ATT: Exchanged MTU is propagate to ATT Server and GATT Client

Changes December 2017

Added

  • Introduced btstack_network.h network interface abstraction
  • btstack_network_posix implementation using Linux tun/tap interface
  • WICED: support for btstack_stdin (HAVE_STDIN)
  • GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created.
  • TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h)
  • TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c
  • LE Device DB TLV: overwrite oldest entry if no free entries available
  • SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role
  • Example/hid_host_demo with HID parser and support for basic US keyboard layout
  • EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports
  • Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304)

Changed

  • panu_demo: uses btstack_network.h now
  • WICED: configure printf to replace Linefeed with CRLF
  • SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations

Fixed

  • RFCOMM: support connection requests during connection failure
  • L2CAP: support connection requests during connection failure
  • L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU)
  • HCI: avoid double free during halting
  • SM: fixed reconnect using legacy pairing in slave role