Remove v6 adapter for dragon

KlipperScreen.conf

@@ -1,7 +1,14 @@
-
+[preheat ABS]
-#~# --- Do not edit below this line. This section is auto generated --- #~#
+extruder: 170
-
+heater_bed: 110
-#~#
+chamber: 0
-#~# [main]
+
-#~# print_sort_dir = date_desc
+[preheat PLA]
-#~#
+extruder: 110
+heater_bed: 60
+chamber: 30
+
+[preheat PETG]
+extruder: 170
+heater_bed: 90
+chamber: 40

Slicer Profile/SuperSlicer/config.ini

@@ -1,4 +1,4 @@
-# generated by SuperSlicer 2.3.57 on 2022-01-08 at 23:14:56 UTC
+# generated by SuperSlicer 2.4 on 2022-10-09 at 11:13:26 UTC
 allow_empty_layers = 0
 avoid_crossing_not_first_layer = 1
 avoid_crossing_perimeters = 0
@@ -6,7 +6,7 @@ avoid_crossing_perimeters_max_detour = 0
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,350x0,350x350,0x350
-bed_temperature = 90
+bed_temperature = 110
 before_layer_gcode = 
 between_objects_gcode = 
 bottom_fill_pattern = monotonicgapfill
@@ -14,23 +14,27 @@ bottom_solid_layers = 5
 bottom_solid_min_thickness = 0
 bridge_acceleration = 3000
 bridge_angle = 0
-bridge_fan_speed = 100
+bridge_fan_speed = 30
 bridge_flow_ratio = 80%
+bridge_internal_acceleration = 0
 bridge_internal_fan_speed = -1
 bridge_overlap = 90%
 bridge_overlap_min = 80%
 bridge_speed = 60
 bridge_speed_internal = 150%
+bridge_type = nozzle
 bridged_infill_margin = 200%
+brim_acceleration = 0
 brim_ears = 0
 brim_ears_detection_length = 1
 brim_ears_max_angle = 120
 brim_ears_pattern = concentric
 brim_inside_holes = 0
-brim_offset = 0
+brim_separation = 0
-brim_width = 0
+brim_speed = 50%
+brim_width = 5
 brim_width_interior = 0
-chamber_temperature = 35
+chamber_temperature = 50
 clip_multipart_objects = 1
 color_change_gcode = M600
 colorprint_heights = 
@@ -39,7 +43,6 @@ complete_objects = 0
 complete_objects_one_brim = 0
 complete_objects_one_skirt = 0
 complete_objects_sort = object
-cooling = 1
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 curve_smoothing_angle_concave = 160
@@ -49,23 +52,26 @@ curve_smoothing_precision = 0
 default_acceleration = 3000
 default_filament_profile = "Basic PLA @VORON"
 default_print_profile = 0.15mm 0.4nozzle
+default_speed = 100
 deretract_speed = 25
-disable_fan_first_layers = 1
+disable_fan_first_layers = 3
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 duplicate_distance = 6
 end_filament_gcode = ""
-end_gcode = PRINT_END
+end_gcode = PRINT_END_STBY
 enforce_full_fill_volume = 1
+enforce_retract_first_layer = 1
 ensure_vertical_shell_thickness = 1
 exact_last_layer_height = 0
 external_infill_margin = 150%
+external_perimeter_acceleration = 0
 external_perimeter_cut_corners = 0%
 external_perimeter_extrusion_spacing = 100%
 external_perimeter_extrusion_width = 
 external_perimeter_fan_speed = -1
 external_perimeter_overlap = 100%
-external_perimeter_speed = 25
+external_perimeter_speed = 50%
 external_perimeters_first = 0
 external_perimeters_hole = 1
 external_perimeters_nothole = 1
@@ -84,21 +90,21 @@ extrusion_axis = E
 extrusion_multiplier = 1
 extrusion_spacing = 
 extrusion_width = 110%
-fan_always_on = 1
+fan_always_on = 0
-fan_below_layer_time = 100
+fan_below_layer_time = 20
 fan_kickstart = 0
 fan_percentage = 0
 fan_speedup_overhangs = 1
 fan_speedup_time = 0
 feature_gcode = 
-filament_colour = #FF3232
+filament_colour = #3A80CA
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cooling_zone_pause = 0
-filament_cost = 16
+filament_cost = 20
 filament_custom_variables = ""
-filament_density = 1.38
+filament_density = 1.04
 filament_deretract_speed = nil
 filament_diameter = 1.75
 filament_dip_extraction_speed = 70
@@ -110,12 +116,12 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_overlap = 100%
 filament_max_speed = 0
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_max_wipe_tower_speed = 0
 filament_melt_zone_pause = 0
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
@@ -126,7 +132,7 @@ filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_seam_gap = nil
-filament_settings_id = "Standard PETG"
+filament_settings_id = "Standard ABS"
 filament_shrink = 100%
 filament_skinnydip_distance = 31
 filament_soluble = 0
@@ -134,7 +140,7 @@ filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_toolchange_part_fan_speed = 50
 filament_toolchange_temp = 200
-filament_type = PET
+filament_type = ABS
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
@@ -144,29 +150,39 @@ filament_vendor = (Unknown)
 filament_wipe = nil
 filament_wipe_advanced_pigment = 0.5
 filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
 filament_wipe_only_crossing = nil
 filament_wipe_speed = nil
 fill_angle = 45
 fill_angle_increment = 0
-fill_density = 18%
+fill_density = 40%
 fill_pattern = gyroid
 fill_smooth_distribution = 15%
 fill_smooth_width = 50%
 fill_top_flow_ratio = 100%
 first_layer_acceleration = 1000
-first_layer_bed_temperature = 90
+first_layer_acceleration_over_raft = 0
+first_layer_bed_temperature = 110
 first_layer_extrusion_spacing = 
 first_layer_extrusion_width = 140%
 first_layer_flow_ratio = 100%
 first_layer_height = 0.2
-first_layer_infill_speed = 25
+first_layer_infill_speed = 30
-first_layer_min_speed = 25
+first_layer_min_speed = 30
 first_layer_size_compensation = -0.1
 first_layer_size_compensation_layers = 1
-first_layer_speed = 25
+first_layer_speed = 30
-first_layer_temperature = 230
+first_layer_speed_over_raft = 30
+first_layer_temperature = 240
 full_fan_speed_layer = 4
-gap_fill = 1
+fuzzy_skin = none
+fuzzy_skin_point_dist = 200%
+fuzzy_skin_thickness = 150%
+gap_fill_acceleration = 0
+gap_fill_enabled = 1
+gap_fill_flow_match_perimeter = 0%
 gap_fill_last = 0
 gap_fill_min_area = 100%
 gap_fill_overlap = 100%
@@ -177,6 +193,8 @@ gcode_flavor = klipper
 gcode_label_objects = 1
 gcode_precision_e = 5
 gcode_precision_xyz = 3
+gcode_resolution = 0
+gcode_substitutions = 
 high_current_on_filament_swap = 0
 hole_size_compensation = -0.05
 hole_size_threshold = 100
@@ -200,10 +218,12 @@ infill_extrusion_width = 110%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 20%
-infill_speed = 100
+infill_speed = 70
-inherits_cummulative = "0.2mm 0.4nozzle V2";"Basic PLA @VORON";"Voron_v2_350 0.4 nozzle"
+inherits_cummulative = "0.2mm 0.4nozzle V2";"Basic ABS @VORON";"Voron_v2_350 0.4 nozzle"
+init_z_rotate = 0
 interface_shells = 0
 ironing = 0
+ironing_acceleration = 0
 ironing_angle = -1
 ironing_flowrate = 15%
 ironing_spacing = 0.1
@@ -220,7 +240,7 @@ machine_max_acceleration_travel = 1500,1250
 machine_max_acceleration_x = 3000
 machine_max_acceleration_y = 3000
 machine_max_acceleration_z = 300
-machine_max_feedrate_e = 1500
+machine_max_feedrate_e = 120
 machine_max_feedrate_x = 500
 machine_max_feedrate_y = 500
 machine_max_feedrate_z = 12
@@ -230,7 +250,7 @@ machine_max_jerk_y = 10
 machine_max_jerk_z = 0.2
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
-max_fan_speed = 100
+max_fan_speed = 0
 max_gcode_per_second = 1500
 max_layer_height = 0.3
 max_print_height = 350
@@ -245,12 +265,13 @@ milling_speed = 30
 milling_toolchange_end_gcode = 
 milling_toolchange_start_gcode = 
 milling_z_lift = 
-min_fan_speed = 100
+min_fan_speed = 0
 min_layer_height = 0.0375
 min_length = 0.035
 min_print_speed = 15
 min_skirt_length = 20
 min_width_top_surface = 200%
+mmu_segmented_region_max_width = 0
 model_precision = 0.0001
 no_perimeter_unsupported_algo = none
 notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
@@ -262,6 +283,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 over_bridge_flow_ratio = 110%
+overhangs_acceleration = 0
 overhangs_reverse = 1
 overhangs_reverse_threshold = 300%
 overhangs_speed = 100%
@@ -278,8 +300,8 @@ perimeter_loop = 0
 perimeter_loop_seam = rear
 perimeter_overlap = 100%
 perimeter_round_corners = 0
-perimeter_speed = 90
+perimeter_speed = 70
-perimeters = 3
+perimeters = 4
 physical_printer_settings_id = 
 post_process = 
 print_custom_variables = 
@@ -287,18 +309,22 @@ print_extrusion_multiplier = 100%
 print_host = 
 print_retract_length = -1
 print_retract_lift = -1
-print_settings_id = Carstens Voron 0.2mm 0.4er Düse PETG
+print_settings_id = Carstens Voron 0.2mm 0.4er Düse ABS
 print_temperature = 0
 printer_custom_variables = 
 printer_model = Voron_v2_350
 printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nE3DV6
-printer_settings_id = Carstens Voron 2.4 0.4er Düse PETG
+printer_settings_id = Carstens Voron 2.4 0.4er Düse ABS
 printer_technology = FFF
 printer_variant = 0.4
 printer_vendor = 
 printhost_apikey = 
 printhost_cafile = 
 printhost_port = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 remaining_times = 0
 remaining_times_type = m73
@@ -307,7 +333,7 @@ resolution_internal = 0.2
 retract_before_travel = 3
 retract_before_wipe = 0%
 retract_layer_change = 0
-retract_length = 2
+retract_length = 0.6
 retract_length_toolchange = 10
 retract_lift = 0.4
 retract_lift_above = 0.2
@@ -325,58 +351,67 @@ silent_mode = 0
 single_extruder_multi_material = 0
 single_extruder_multi_material_priming = 1
 skirt_brim = 0
-skirt_distance = 3
+skirt_distance = 5
 skirt_distance_from_brim = 1
 skirt_extrusion_width = 130%
 skirt_height = 2
 skirts = 5
 slice_closing_radius = 0.049
-slowdown_below_layer_time = 20
+slicing_mode = regular
+slowdown_below_layer_time = 15
 small_perimeter_max_length = 20
 small_perimeter_min_length = 6
 small_perimeter_speed = 40
 solid_fill_pattern = rectilineargapfill
+solid_infill_acceleration = 0
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_spacing = 105%
 solid_infill_extrusion_width = 
+solid_infill_overlap = 100%
 solid_infill_speed = 60%
 solid_over_perimeters = 2
 spiral_vase = 0
 standby_temperature_delta = -5
 start_filament_gcode = ""
-start_gcode = M140 S[first_layer_bed_temperature] ; Heat bed to target temp\nM104 S170                                              ; Preheat Nozzle to 170C\nPRINT_START                                          ; Bed level then heat Nozzle to target temp\nSET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=Chamber TARGET=[chamber_temperature]\nM109 S{first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]}
+start_gcode = M140 S[first_layer_bed_temperature] ; Heat bed to target temp\nM104 S170                                              ; Preheat Nozzle to 170C\nPRINT_START_STBY                                          ; Bed level then heat Nozzle to target temp\nSET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=Chamber TARGET=[chamber_temperature]\nM109 S{first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]}
 start_gcode_manual = 0
 support_material = 0
+support_material_acceleration = 0
 support_material_angle = 0
 support_material_auto = 1
-support_material_buildplate_only = 0
+support_material_bottom_contact_distance = 0.15
-support_material_contact_distance_bottom = 0.15
+support_material_bottom_interface_layers = -1
-support_material_contact_distance_top = 0.15
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.15
 support_material_contact_distance_type = filament
 support_material_enforce_layers = 2
 support_material_extruder = 0
 support_material_extrusion_width = 110%
+support_material_interface_acceleration = 0
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
+support_material_interface_fan_speed = -1
 support_material_interface_layers = 1
 support_material_interface_pattern = sawtooth
 support_material_interface_spacing = 0.2
-support_material_interface_speed = 70
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
-support_material_solid_first_layer = 1
 support_material_spacing = 1
-support_material_speed = 80
+support_material_speed = 70
+support_material_style = grid
 support_material_synchronize_layers = 0
 support_material_threshold = 30
 support_material_with_sheath = 0
 support_material_xy_spacing = 0.6
-temperature = 230
+temperature = 240
 template_custom_gcode = 
-thin_perimeters = 1
+thin_perimeters = 100%
-thin_perimeters_all = 0
+thin_perimeters_all = 0%
 thin_walls = 1
+thin_walls_acceleration = 0
 thin_walls_merge = 1
 thin_walls_min_width = 50%
 thin_walls_overlap = 50%
@@ -386,18 +421,24 @@ thumbnails = 64x64,400x300
 thumbnails_color = #018aff
 thumbnails_custom_color = 0
 thumbnails_end_file = 0
+thumbnails_format = PNG
 thumbnails_with_bed = 1
+time_cost = 0
 time_estimation_compensation = 100%
+time_start_gcode = 20
+time_toolchange = 30
 tool_name = Afterburner
 toolchange_gcode = 
-top_fan_speed = 100
+top_fan_speed = -1
 top_fill_pattern = monotonic
-top_infill_extrusion_spacing = 100%
+top_infill_extrusion_spacing = 
-top_infill_extrusion_width = 
+top_infill_extrusion_width = 100%
+top_solid_infill_acceleration = 0
 top_solid_infill_speed = 60%
 top_solid_layers = 6
 top_solid_min_thickness = 0
 travel_acceleration = 1500
+travel_deceleration_use_target = 1
 travel_speed = 300
 travel_speed_z = 0
 use_firmware_retraction = 0
@@ -410,13 +451,16 @@ wipe_advanced_algo = linear
 wipe_advanced_multiplier = 60
 wipe_advanced_nozzle_melted_volume = 120
 wipe_extra_perimeter = 0
+wipe_inside_depth = 50%
+wipe_inside_end = 1
+wipe_inside_start = 0
 wipe_into_infill = 0
 wipe_into_objects = 0
 wipe_only_crossing = 1
 wipe_speed = 0
 wipe_tower = 1
 wipe_tower_bridging = 10
-wipe_tower_brim = 150%
+wipe_tower_brim_width = 150%
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

WARTUNGSPROTOKOLL.txt

@@ -40,4 +40,8 @@ Stand Filament: 980m
 02.10.2022
 - Hotend verstopft, Filament hat sich in v6 Adapter gewickelt, Vermutung zu wenig Hotent-Temperatur in Verbindung mir zuviel Extrusion
 - v6 Adapter angefast, damit Einführen des Filamentes einfacher wird
-Stand Filament: 1969m
+Stand Filament: 1969m
+
+06.10.2022
+- Hotend Umbau auf Dragon Hotend Halterung, um v6 Adapter zu entfernen
+Stand Filament: 2096m

config/extruder_hotend.cfg

@@ -15,7 +15,7 @@ sensor_pin: PA0
 control_pin: PA2
 x_offset: 0
 y_offset: 25.0
-z_offset: 3.955
+z_offset: 3.155
 speed: 10.0
 samples: 3
 samples_result: median