57 lines
3.3 KiB
Markdown
57 lines
3.3 KiB
Markdown
+ With the "Green Output" option enabled (previously "GreenTerm=>Out"),
|
||
Temperature/MEM/SHIFT are displayed in GREEN (no space for a separate icon).
|
||
+ Show window size on Graph Display Layout.
|
||
|
||
|
||
|
||
+ Added a calibration menu (similar to the software on a computer). The password is the same!
|
||
(at the bottom of this menu, there is a text line with CW/CCW counters, these are for testing the Encoder.
|
||
The counters are reset with UP/DOWN buttons. I did it just for myself, but decided to leave it as is.)
|
||
How to use:
|
||
Enter the password, press (ENTER)
|
||
If the password is correct, the calibration menu will be displayed.
|
||
There are all the necessary parameters (including Back V-BAT and BackInput which are unavailable in software).
|
||
After selecting a parameter, the corresponding formula is displayed at the bottom of the display, according to which the firmware calculates the values.
|
||
The changes are applied immediately (in RAM), so you can see the result.
|
||
Click on (SHIFT)+(Dot) sets the selected parameter to the factory setting.
|
||
Select the desired action and press (ENTER) (!!! The cursor must be on the button !!!)
|
||
* NOP - No Operation (does nothing, exit the menu without resetting the password)
|
||
* CANCEL - Cancels all settings (loads current values from EEPROM)
|
||
* STORE - Stores current changes to EEPROM
|
||
* RESTORE - Restores factory calibrations (from a backup copy. Similar to holding the button (1) at power on).
|
||
Click on the encoder resets the password and closes the menu
|
||
(!!! Calibrations are not saved/restored. All changes will remain until reboot !!!)
|
||
|
||
|
||
|
||
+ menu "--- Power Settings ---"
|
||
+ Added option "Max V-SET" sets limit for V-SET.
|
||
+ menu "--- Display ---"
|
||
+ Added two parameters "Very Slow" and "ExtraSlow" to the "Update Rate" option, averaging the last 8 or 16 samples, respectively.
|
||
+ menu "--- Charge Batteries ---"
|
||
+ Added "AutoSetLayout" option to automatically switch Layout when a battery is detected (Charger Mode),
|
||
when the battery is disconnected, it will return to the previous Layout (unless you switched manually)
|
||
+ The "Home" menu has been slightly rebuilt, some options have been moved to separate groups:
|
||
@ "--- Appearance ---"
|
||
+ Added option "7SegInact.Elem" to disable highlighting of inactive elements in 7-Seg
|
||
@ "--- V-SET/I-SET/OVP/OCP/OPP ---"
|
||
# "Timeout" (бывшая "IVSet Timeout").
|
||
# "Save Mult.".
|
||
# "Skip Exit" (бывшая "SkipExitIVSet").
|
||
@ "--- Memory ---"
|
||
# "Hint" (previously "Mem Hint").
|
||
# "Confirmation" (previously "Take Ok").
|
||
# "Instant Out" (previously "Take Out").
|
||
# "SHIFT Table" (previously "ShiftMemTable").
|
||
@ "--- Buzzer ---"
|
||
+ Added option "PwrOnBeep" - sound when RD turned on.
|
||
+ duplicated "Comm Buzzer" option.
|
||
@ "--- Colors ---"
|
||
+ "ORP" - sets the ORP color in the status bar.
|
||
+ "Ah (L1)", "Wh (L1)" separately sets the color of the corresponding elements in Layout 1.
|
||
* Fixed bug with offset Ah\Wh lines in Layout 1.
|
||
* Fixed bug with Mem Hint popup overlapping confirmation dialog.
|
||
* Fixed bug with displaying I-OFF (RD6012, RD6018)
|
||
|
||
|