68 lines
2.6 KiB
Markdown
68 lines
2.6 KiB
Markdown
# wolfSSH/AlphaProject Boad Simple Ssh Example Server Setup Guide
|
||
This demo is tested with the following condition.
|
||
|
||
* Renesas : CS+ v8.01
|
||
* Board : Alpha Project AP-RX71M-0A w/ Sample program v2.0
|
||
* wolfSSL : 4.0.0
|
||
* wolfSSH : 1.3.1
|
||
|
||
## Setup process:
|
||
### 1. Download software
|
||
|
||
- Unzip AlphaProject firmware
|
||
- Unzip wolfssl under the same directory
|
||
- Unzip wolfssh under the same directory
|
||
|
||
### 2. Set up wolfSSL and wolfSSH
|
||
- Open wolfssh\ide\Renesas\cs+\wolfssl_lib\wolfssl_lib.mtpj with CS+ and build
|
||
- Open wolfssh\ide\Renesas\cs+\wolfssh_lib\wolfssh_lib.mtpj with CS+ and build
|
||
- Open demo_server.mtpj and build. This create demo program library.
|
||
|
||
### 3. Set up AlphaProject
|
||
- The demo uses ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\ap_rx71m_0a_ether_sample_cs.mtpj
|
||
- Open and edit ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\AP_RX71M_0A.c
|
||
insert wolfSSL_init() in UsbfInit().
|
||
```
|
||
CanInit();
|
||
SciInit();
|
||
EthernetAppInit();
|
||
UsbfInit();
|
||
wolfSSL_init(); <- insert this line
|
||
```
|
||
|
||
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\smc_gen\r_config\r_bsp_config.h
|
||
```
|
||
Line 154 #pragma stacksize su=0x2000
|
||
Line 175 #define BSP_CFG_HEAP_BYTES (0xa000)
|
||
```
|
||
- Modify IP address Sample\ap_rx71m_0a_usbfunc_sample_cs\src\tcp_sample\config_tcpudp.c as needed
|
||
|
||
```
|
||
#define MY_IP_ADDR0 192,168,1,200 /* Local IP address */
|
||
#define GATEWAY_ADDR0 192,168,1,254 /* Gateway address (invalid if all 0s) */
|
||
#define SUBNET_MASK0 255,255,255,0
|
||
```
|
||
- Add project properties of linking library in ap_rx71m_0a_usbfunc_sample_cs.mtpj
|
||
wolfssh\ide\Renesas\cs+\Projects\wolfssl_lib\DefaultBuild\wolfssl_lib.lib
|
||
wolfssh\ide\Renesas\cs+\Projects\wolfssh_lib\DefaultBuild\wolfssh_lib.lib
|
||
wolfssh\ide\Renesas\cs+\Projects\demo_server\DefaultBuild\demo_sever.lib
|
||
|
||
- Set CC-RX(Build Tool)->Library Geberation->Library Configuration to"C99" and enable ctype.h.
|
||
|
||
- Build the project and start execut. You see message on the console prompting command.
|
||
```
|
||
Start server_test
|
||
```
|
||
- wolfSSH simple server will be open on port 50000 which can be connected to by using the example client bundled with wolfSSH
|
||
```
|
||
$ ./examples/client/client -h 192.168.1.200 -p 50000 -u jill
|
||
Sample public key check callback
|
||
public key = 0x55a0890864ea
|
||
public key size = 279
|
||
ctx = You've been sampled!
|
||
Password: <---- input "upthehill"
|
||
Server said: Hello, wolfSSH!
|
||
```
|
||
## Support
|
||
|
||
Email us at [support@wolfssl.com](mailto:support@wolfssl.com).
|