173 lines
7 KiB
Markdown
173 lines
7 KiB
Markdown
# wolfSSL STM32 Example for STM32 Cube IDE
|
|
|
|
This example includes:
|
|
|
|
* wolfCrypt test
|
|
* wolfCrypt benchmark
|
|
* wolfSSL TLS client/server test using in-memory transfers
|
|
|
|
These examples use the Cube HAL for STM32.
|
|
|
|
## Requirements
|
|
|
|
* STM32CubeIDE: Integrated Development Environment for STM32 [https://www.st.com/en/development-tools/stm32cubeide.html](https://www.st.com/en/development-tools/stm32cubeide.html)
|
|
|
|
## Configuration
|
|
|
|
The settings for the wolfSSL CubeMX pack are in the generated `wolfSSL.I-CUBE-wolfSSL_conf.h` file. An example of this is located in `IDE/STM32Cube/wolfSSL_conf.h` (renamed to avoid possible conflicts with generated file).
|
|
|
|
The template used for generation is `IDE/STM32Cube/default_conf.ftl` which can be updated at `STM32Cube/Repository/Packs/wolfSSL/wolfSSL/[Version]/CubeMX/templates/default_conf.ftl`.
|
|
|
|
The section for "Hardware platform" may need to be adjusted depending on your processor and board:
|
|
|
|
* To enable STM32F1 support define `WOLFSSL_STM32F1`.
|
|
* To enable STM32F2 support define `WOLFSSL_STM32F2`.
|
|
* To enable STM32F4 support define `WOLFSSL_STM32F4`.
|
|
* To enable STM32F7 support define `WOLFSSL_STM32F7`.
|
|
* To enable STM32L4 support define `WOLFSSL_STM32L4`.
|
|
* To enable STM32L5 support define `WOLFSSL_STM32L5`.
|
|
* To enable STM32H7 support define `WOLFSSL_STM32H7`.
|
|
* To enable STM32WB support define `WOLFSSL_STM32WB`.
|
|
|
|
To use the STM32 Cube HAL support make sure `WOLFSSL_STM32_CUBEMX` is defined.
|
|
|
|
The L5 and WB55 support ECC PKA acceleration, which is enabled with `WOLFSSL_STM32_PKA`.
|
|
|
|
To disable hardware crypto acceleration you can define:
|
|
|
|
* `NO_STM32_HASH`
|
|
* `NO_STM32_CRYPTO`
|
|
|
|
To enable the latest Cube HAL support please define `STM32_HAL_V2`.
|
|
|
|
If you'd like to use the older Standard Peripheral library undefine `WOLFSSL_STM32_CUBEMX`.
|
|
|
|
With STM32 Cube HAL v2 some AES GCM hardware has a limitation for the AAD header, which must be a multiple of 4 bytes.
|
|
|
|
If using `STM32_AESGCM_PARTIAL` with the following patch it will enable use for all AAD header sizes. The `STM32Cube_FW_F7_V1.16.0` patch is:
|
|
|
|
```
|
|
diff --git a/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h b/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h
|
|
--- a/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h
|
|
+++ b/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h
|
|
@@ -63,6 +63,7 @@ typedef struct
|
|
GCM : also known as Additional Authentication Data
|
|
CCM : named B1 composed of the associated data length and Associated Data. */
|
|
uint32_t HeaderSize; /*!< The size of header buffer in word */
|
|
+ uint32_t HeaderPadSize; /*!< <PATCH> The size of padding in bytes added to actual header data to pad it to a multiple of 32 bits </PATCH> */
|
|
uint32_t *B0; /*!< B0 is first authentication block used only in AES CCM mode */
|
|
uint32_t DataWidthUnit; /*!< Data With Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/
|
|
uint32_t KeyIVConfigSkip; /*!< CRYP peripheral Key and IV configuration skip, to config Key and Initialization
|
|
|
|
diff --git a/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c b/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c
|
|
--- a/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c
|
|
+++ b/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c
|
|
@@ -132,6 +132,8 @@ HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, u
|
|
uint64_t inputlength = (uint64_t)hcryp->SizesSum * 8U; /* input length in bits */
|
|
uint32_t tagaddr = (uint32_t)AuthTag;
|
|
|
|
+ headerlength -= ((uint64_t)(hcryp->Init.HeaderPadSize) * 8U); /* <PATCH> Decrement the header size removing the pad size </PATCH> */
|
|
+
|
|
if (hcryp->State == HAL_CRYP_STATE_READY)
|
|
{
|
|
/* Process locked */
|
|
```
|
|
|
|
If you are using FreeRTOS make sure your `FreeRTOSConfig.h` has its `configTOTAL_HEAP_SIZE` increased.
|
|
|
|
The TLS client/server benchmark example requires about 76 KB for allocated tasks (with stack) and peak heap. This uses both a TLS client and server to test a TLS connection locally for each enabled TLS cipher suite.
|
|
|
|
## STM32 Cube Pack
|
|
|
|
### STM32 Cube Pack Installation
|
|
|
|
1. Download [wolfSSL Cube Pack](https://www.wolfssl.com/files/ide/I-CUBE-wolfSSL.pack)
|
|
2. Run the “STM32CubeMX” tool.
|
|
3. Under “Manage software installations” click “INSTALL/REMOVE” button.
|
|
4. From Local and choose “I-CUBE-wolfSSL.pack”.
|
|
5. Accept the GPLv2 license. Contact wolfSSL at sales@wolfssl.com for a commercial license and support/maintenance.
|
|
|
|
### STM32 Cube Pack Usage
|
|
|
|
1. Create or open a Cube Project based on your hardware.
|
|
2. Under “Software Packs” choose “Select Components”.
|
|
3. Find and check all components for the wolfSSL.wolfSSL packs (wolfSSL / Core, wolfCrypt / Core and wolfCrypt / Test). Close
|
|
4. Under the “Software Packs” section click on “wolfSSL.wolfSSL” and configure the parameters.
|
|
5. For Cortex-M recommend “Math Configuration” -> “Single Precision Cortex-M Math” for the fastest option.
|
|
6. Generate Code
|
|
7. The Benchmark example uses float. To enable go to "Project Properties" -> "C/C++ Build" -> "Settings" -> "Tool Settings" -> "MCU Settings" -> Check "Use float with printf".
|
|
8. To enable printf make the `main.c` changes below in the [STM32 Printf](#stm32-printf) section.
|
|
|
|
### STM32 Cube Pack Examples
|
|
|
|
In the `I-CUBE-wolfSSL.pack` pack there are pre-assembled example projects available.
|
|
After installing the pack you can find these example projects in `STM32Cube/Repository/Packs/wolfSSL/wolfSSL/[Version]/Projects`.
|
|
To use an example:
|
|
|
|
1. Open STM32CubeIDE
|
|
2. Choose "Import" -> "Import an Existing STM32CubeMX Configuration File (.ioc)".
|
|
3. Browse to find the .ioc in `STM32Cube/Repository/Packs/wolfSSL/wolfSSL/[Version]/Projects` and click finish.
|
|
|
|
## Example `IDE/STM32Cube/wolfssl_example.c` Output
|
|
|
|
```
|
|
....MENU
|
|
|
|
.t. WolfCrypt Test
|
|
.b. WolfCrypt Benchmark
|
|
.l. WolfSSL TLS Bench
|
|
.e. Show Cipher List
|
|
|
|
Please select one of the above options:
|
|
```
|
|
|
|
## Benchmarks
|
|
|
|
See [STM32_Benchmarks.md](STM32_Benchmarks.md).
|
|
|
|
Note: The Benchmark example uses float. To enable go to "Project Properties" -> "C/C++ Build" -> "Settings" -> "Tool Settings" -> "MCU Settings" -> Check "Use float with printf".
|
|
|
|
## STM32 Printf
|
|
|
|
In main.c make the following changes:
|
|
|
|
```
|
|
/* Retargets the C library printf function to the USART. */
|
|
#include <stdio.h>
|
|
#include <wolfssl/wolfcrypt/settings.h>
|
|
#ifdef __GNUC__
|
|
int __io_putchar(int ch)
|
|
#else
|
|
int fputc(int ch, FILE *f)
|
|
#endif
|
|
{
|
|
HAL_UART_Transmit(&HAL_CONSOLE_UART, (uint8_t *)&ch, 1, 0xFFFF);
|
|
|
|
return ch;
|
|
}
|
|
#ifdef __GNUC__
|
|
int _write(int file,char *ptr, int len)
|
|
{
|
|
int DataIdx;
|
|
for (DataIdx= 0; DataIdx< len; DataIdx++) {
|
|
__io_putchar(*ptr++);
|
|
}
|
|
return len;
|
|
}
|
|
#endif
|
|
|
|
int main(void)
|
|
{
|
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
|
HAL_Init();
|
|
|
|
/* Turn off buffers, so I/O occurs immediately */
|
|
setvbuf(stdin, NULL, _IONBF, 0);
|
|
setvbuf(stdout, NULL, _IONBF, 0);
|
|
setvbuf(stderr, NULL, _IONBF, 0);
|
|
|
|
```
|
|
|
|
## Support
|
|
|
|
For questions please email [support@wolfssl.com](mailto:support@wolfssl.com)
|