Add NMEA0183 Parser example to illustrate how to use uart event driver together with esp event library to get GPS information.
56 lines
1.3 KiB
Markdown
56 lines
1.3 KiB
Markdown
# UART Events Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example shows how to use the UART driver to handle special UART events. It also reads data from `UART0` directly,
|
|
and echoes it back to the monitoring console.
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
The example can be used with any ESP32 development board connected to a computer with a USB cable.
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
make menuconfig
|
|
```
|
|
or
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
* Set serial port under Serial Flasher Options.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
make -j4 flash monitor
|
|
```
|
|
or
|
|
```
|
|
idf.py flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
Pushing `a` followed by a `b` on the keyboard will generate the following output:
|
|
```
|
|
...
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
I (299) uart: queue free spaces: 20
|
|
I (2249) uart_events: uart[0] event:
|
|
I (2249) uart_events: [UART DATA]: 1
|
|
I (2249) uart_events: [DATA EVT]:
|
|
aI (12089) uart_events: uart[0] event:
|
|
I (12089) uart_events: [UART DATA]: 1
|
|
I (12089) uart_events: [DATA EVT]:
|
|
b
|
|
```
|