cba69dd088
The existing Bluetooth examples are split as:
1. examples/bluetooth/bluedroid - Bluedroid Host (BT + BLE) examples
a. examples/bluetooth/bluedroid/classic_bt - Classic BT examples
b. examples/bluetooth/bluedroid/ble - BLE examples
c. examples/bluetooth/bluedroid/coex - Classic BT and BLE coex examples
d. examples/bluetooth/bluedroid/hci - VHCI and HCI UART examples
i. Rename ble_adv to controller_vhci_ble_adv and move it in hci folder
2. examples/bluetooth/nimble - NimBLE BLE Host + NimBLE Mesh examples
3. examples/bluetooth/esp_ble_mesh - ESP BLE Mesh examples
4. Update documentation references
16 lines
1.2 KiB
Markdown
16 lines
1.2 KiB
Markdown
ESP BLE Mesh Node demo
|
||
==========================
|
||
|
||
This demo shows how BLE Mesh device can be set up as a node with the following features:
|
||
|
||
- One element
|
||
- Two SIG models
|
||
- **Configuration Server model**: The role of this model is mainly to configure Provisioner device’s AppKey and set up its relay function, TTL size, subscription, etc.
|
||
- **OnOff Server model**: This model implements the most basic function of turning the lights on and off.
|
||
|
||
The default purpose of this demo is to enable the advertising function with 20-ms non-connectable interval in BLE 5.0. You can disable this function through menuconfig: `make menuconfig --> Example Configuration --> This option facilitates sending with 20ms non-connectable interval...`
|
||
|
||
For a better demonstration effect, an RGB LED can be soldered onto the ESP32-DevKitC board, by connecting their corresponding GPIO pins are GPIO\_NUM\_25, GPIO\_NUM\_26, GPIO\_NUM\_27. Then you need to select the following option in menuconfig:
|
||
`make menuconfig --> Example Configuration --> Board selection for BLE Mesh --> ESP-WROOM-32`
|
||
|
||
Please check the [tutorial](tutorial/Ble_Mesh_Node_Example_Walkthrough.md) for more information about this example.
|