0bf2906bc9
After RMT driver refactor, two breaking change are introduced:
1. Users needs to call `rmt_driver_install` before `rmt_config`.
2. Do not support memory block count > 1,
fix this two issues
closes https://github.com/espressif/esp-idf/issues/4664
closes https://github.com/espressif/esp-idf/issues/4959
308 lines
9.5 KiB
C
308 lines
9.5 KiB
C
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#pragma once
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include <stdbool.h>
|
|
#include "soc/rmt_struct.h"
|
|
#include "soc/rmt_caps.h"
|
|
|
|
#define RMT_LL_HW_BASE (&RMT)
|
|
#define RMT_LL_MEM_BASE (&RMTMEM)
|
|
|
|
static inline void rmt_ll_enable_drive_clock(rmt_dev_t *dev, bool enable)
|
|
{
|
|
dev->conf_ch[0].conf0.clk_en = enable;
|
|
}
|
|
|
|
static inline void rmt_ll_reset_counter_clock_div(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->conf_ch[channel].conf1.ref_cnt_rst = 1;
|
|
dev->conf_ch[channel].conf1.ref_cnt_rst = 0;
|
|
}
|
|
|
|
static inline void rmt_ll_reset_tx_pointer(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->conf_ch[channel].conf1.mem_rd_rst = 1;
|
|
dev->conf_ch[channel].conf1.mem_rd_rst = 0;
|
|
}
|
|
|
|
static inline void rmt_ll_reset_rx_pointer(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->conf_ch[channel].conf1.mem_wr_rst = 1;
|
|
dev->conf_ch[channel].conf1.mem_wr_rst = 0;
|
|
}
|
|
|
|
static inline void rmt_ll_start_tx(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->conf_ch[channel].conf1.tx_start = 1;
|
|
}
|
|
|
|
static inline void rmt_ll_stop_tx(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
RMTMEM.chan[channel].data32[0].val = 0;
|
|
dev->conf_ch[channel].conf1.tx_start = 0;
|
|
dev->conf_ch[channel].conf1.mem_rd_rst = 1;
|
|
dev->conf_ch[channel].conf1.mem_rd_rst = 0;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_rx(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->conf_ch[channel].conf1.rx_en = enable;
|
|
}
|
|
|
|
static inline void rmt_ll_power_down_mem(rmt_dev_t *dev, bool enable)
|
|
{
|
|
dev->conf_ch[0].conf0.mem_pd = enable; // Only conf0 register of channel0 has `mem_pd`
|
|
}
|
|
|
|
static inline bool rmt_ll_is_mem_power_down(rmt_dev_t *dev)
|
|
{
|
|
return dev->conf_ch[0].conf0.mem_pd; // Only conf0 register of channel0 has `mem_pd`
|
|
}
|
|
|
|
static inline void rmt_ll_set_mem_blocks(rmt_dev_t *dev, uint32_t channel, uint8_t block_num)
|
|
{
|
|
dev->conf_ch[channel].conf0.mem_size = block_num;
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_mem_blocks(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->conf_ch[channel].conf0.mem_size;
|
|
}
|
|
|
|
static inline void rmt_ll_set_counter_clock_div(rmt_dev_t *dev, uint32_t channel, uint32_t div)
|
|
{
|
|
dev->conf_ch[channel].conf0.div_cnt = div;
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_counter_clock_div(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
uint32_t div = dev->conf_ch[channel].conf0.div_cnt;
|
|
return div == 0 ? 256 : div;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_tx_pingpong(rmt_dev_t *dev, bool enable)
|
|
{
|
|
dev->apb_conf.mem_tx_wrap_en = enable;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_mem_access(rmt_dev_t *dev, bool enable)
|
|
{
|
|
dev->apb_conf.fifo_mask = enable;
|
|
}
|
|
|
|
static inline void rmt_ll_set_rx_idle_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
|
|
{
|
|
dev->conf_ch[channel].conf0.idle_thres = thres;
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_rx_idle_thres(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->conf_ch[channel].conf0.idle_thres;
|
|
}
|
|
|
|
static inline void rmt_ll_set_mem_owner(rmt_dev_t *dev, uint32_t channel, uint8_t owner)
|
|
{
|
|
dev->conf_ch[channel].conf1.mem_owner = owner;
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_mem_owner(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->conf_ch[channel].conf1.mem_owner;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_tx_loop(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->conf_ch[channel].conf1.tx_conti_mode = enable;
|
|
}
|
|
|
|
static inline bool rmt_ll_is_tx_loop_enabled(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->conf_ch[channel].conf1.tx_conti_mode;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_rx_filter(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->conf_ch[channel].conf1.rx_filter_en = enable;
|
|
}
|
|
|
|
static inline void rmt_ll_set_rx_filter_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
|
|
{
|
|
dev->conf_ch[channel].conf1.rx_filter_thres = thres;
|
|
}
|
|
|
|
static inline void rmt_ll_set_counter_clock_src(rmt_dev_t *dev, uint32_t channel, uint8_t src)
|
|
{
|
|
dev->conf_ch[channel].conf1.ref_always_on = src;
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_counter_clock_src(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->conf_ch[channel].conf1.ref_always_on;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_tx_idle(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->conf_ch[channel].conf1.idle_out_en = enable;
|
|
}
|
|
|
|
static inline bool rmt_ll_is_tx_idle_enabled(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->conf_ch[channel].conf1.idle_out_en;
|
|
}
|
|
|
|
static inline void rmt_ll_set_tx_idle_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
|
|
{
|
|
dev->conf_ch[channel].conf1.idle_out_lv = level;
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_tx_idle_level(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->conf_ch[channel].conf1.idle_out_lv;
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_channel_status(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
return dev->status_ch[channel];
|
|
}
|
|
|
|
static inline void rmt_ll_set_tx_limit(rmt_dev_t *dev, uint32_t channel, uint32_t limit)
|
|
{
|
|
dev->tx_lim_ch[channel].limit = limit;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_tx_end_interrupt(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->int_ena.val &= ~(1 << (channel * 3));
|
|
dev->int_ena.val |= (enable << (channel * 3));
|
|
}
|
|
|
|
static inline void rmt_ll_enable_rx_end_interrupt(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->int_ena.val &= ~(1 << (channel * 3 + 1));
|
|
dev->int_ena.val |= (enable << (channel * 3 + 1));
|
|
}
|
|
|
|
static inline void rmt_ll_enable_err_interrupt(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->int_ena.val &= ~(1 << (channel * 3 + 2));
|
|
dev->int_ena.val |= (enable << (channel * 3 + 2));
|
|
}
|
|
|
|
static inline void rmt_ll_enable_tx_thres_interrupt(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->int_ena.val &= ~(1 << (channel + 24));
|
|
dev->int_ena.val |= (enable << (channel + 24));
|
|
}
|
|
|
|
static inline void rmt_ll_clear_tx_end_interrupt(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->int_clr.val = (1 << (channel * 3));
|
|
}
|
|
|
|
static inline void rmt_ll_clear_rx_end_interrupt(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->int_clr.val = (1 << (channel * 3 + 1));
|
|
}
|
|
|
|
static inline void rmt_ll_clear_err_interrupt(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->int_clr.val = (1 << (channel * 3 + 2));
|
|
}
|
|
|
|
static inline void rmt_ll_clear_tx_thres_interrupt(rmt_dev_t *dev, uint32_t channel)
|
|
{
|
|
dev->int_clr.val = (1 << (channel + 24));
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_tx_end_interrupt_status(rmt_dev_t *dev)
|
|
{
|
|
uint32_t status = dev->int_st.val;
|
|
return ((status & 0x01) >> 0) | ((status & 0x08) >> 2) | ((status & 0x40) >> 4) | ((status & 0x200) >> 6) |
|
|
((status & 0x1000) >> 8) | ((status & 0x8000) >> 10) | ((status & 0x40000) >> 12) | ((status & 0x200000) >> 14);
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_rx_end_interrupt_status(rmt_dev_t *dev)
|
|
{
|
|
uint32_t status = dev->int_st.val;
|
|
return ((status & 0x02) >> 1) | ((status & 0x10) >> 3) | ((status & 0x80) >> 5) | ((status & 0x400) >> 7) |
|
|
((status & 0x2000) >> 9) | ((status & 0x10000) >> 11) | ((status & 0x80000) >> 13) | ((status & 0x400000) >> 15);
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_err_interrupt_status(rmt_dev_t *dev)
|
|
{
|
|
uint32_t status = dev->int_st.val;
|
|
return ((status & 0x04) >> 2) | ((status & 0x20) >> 4) | ((status & 0x100) >> 6) | ((status & 0x800) >> 8) |
|
|
((status & 0x4000) >> 10) | ((status & 0x20000) >> 12) | ((status & 0x100000) >> 14) | ((status & 0x800000) >> 16);
|
|
}
|
|
|
|
static inline uint32_t rmt_ll_get_tx_thres_interrupt_status(rmt_dev_t *dev)
|
|
{
|
|
uint32_t status = dev->int_st.val;
|
|
return (status & 0xFF000000) >> 24;
|
|
}
|
|
|
|
static inline void rmt_ll_set_tx_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t high_ticks, uint32_t low_ticks)
|
|
{
|
|
dev->carrier_duty_ch[channel].high = high_ticks;
|
|
dev->carrier_duty_ch[channel].low = low_ticks;
|
|
}
|
|
|
|
static inline void rmt_ll_get_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t *high_ticks, uint32_t *low_ticks)
|
|
{
|
|
*high_ticks = dev->carrier_duty_ch[channel].high;
|
|
*low_ticks = dev->carrier_duty_ch[channel].low;
|
|
}
|
|
|
|
static inline void rmt_ll_enable_carrier(rmt_dev_t *dev, uint32_t channel, bool enable)
|
|
{
|
|
dev->conf_ch[channel].conf0.carrier_en = enable;
|
|
}
|
|
|
|
static inline void rmt_ll_set_carrier_on_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
|
|
{
|
|
dev->conf_ch[channel].conf0.carrier_out_lv = level;
|
|
}
|
|
|
|
//Writes items to the specified TX channel memory with the given offset and writen length.
|
|
//the caller should ensure that (length + off) <= (memory block * SOC_RMT_CHANNEL_MEM_WORDS)
|
|
static inline void rmt_ll_write_memory(rmt_mem_t *mem, uint32_t channel, const rmt_item32_t *data, uint32_t length, uint32_t off)
|
|
{
|
|
for (uint32_t i = 0; i < length; i++) {
|
|
mem->chan[channel].data32[i + off].val = data[i].val;
|
|
}
|
|
}
|
|
|
|
/************************************************************************************************
|
|
* Following Low Level APIs only used for backward compatible, will be deprecated in the future!
|
|
***********************************************************************************************/
|
|
|
|
static inline void rmt_ll_set_intr_enable_mask(uint32_t mask)
|
|
{
|
|
RMT.int_ena.val |= mask;
|
|
}
|
|
|
|
static inline void rmt_ll_clr_intr_enable_mask(uint32_t mask)
|
|
{
|
|
RMT.int_ena.val &= (~mask);
|
|
}
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|