678 lines
44 KiB
C
678 lines
44 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef _SOC_SPI_STRUCT_H_
|
|
#define _SOC_SPI_STRUCT_H_
|
|
typedef volatile struct {
|
|
union {
|
|
struct {
|
|
uint32_t reserved0: 16; /*reserved*/
|
|
uint32_t flash_per: 1; /*program erase resume bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_pes: 1; /*program erase suspend bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t usr: 1; /*User define command enable. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_hpm: 1; /*Drive Flash into high performance mode. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_res: 1; /*This bit combined with reg_resandres bit releases Flash from the power-down state or high performance mode and obtains the devices ID. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_dp: 1; /*Drive Flash into power down. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_ce: 1; /*Chip erase enable. Chip erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_be: 1; /*Block erase enable(32KB) . Block erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_se: 1; /*Sector erase enable(4KB). Sector erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_pp: 1; /*Page program enable(1 byte ~256 bytes data to be programmed). Page program operation will be triggered when the bit is set. The bit will be cleared once the operation done .1: enable 0: disable.*/
|
|
uint32_t flash_wrsr: 1; /*Write status register enable. Write status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_rdsr: 1; /*Read status register-1. Read status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
uint32_t flash_rdid: 1; /*Read JEDEC ID . Read ID command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
uint32_t flash_wrdi: 1; /*Write flash disable. Write disable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
uint32_t flash_wren: 1; /*Write flash enable. Write enable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
uint32_t flash_read: 1; /*Read flash enable. Read flash operation will be triggered when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
};
|
|
uint32_t val;
|
|
} cmd;
|
|
union {
|
|
struct {
|
|
uint32_t reserved : 8;
|
|
uint32_t usr_addr_value:24; /*[31:8]:address to slave [7:0]:Reserved.*/
|
|
};
|
|
uint32_t val;
|
|
} addr;
|
|
union {
|
|
struct {
|
|
uint32_t reserved0: 10; /*reserved*/
|
|
uint32_t fcs_crc_en: 1; /*For SPI1 initialize crc32 module before writing encrypted data to flash. Active low.*/
|
|
uint32_t tx_crc_en: 1; /*For SPI1 enable crc32 when writing encrypted data to flash. 1: enable 0:disable*/
|
|
uint32_t wait_flash_idle_en: 1; /*wait flash idle when program flash or erase flash. 1: enable 0: disable.*/
|
|
uint32_t fastrd_mode: 1; /*This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout and spi_fread_dout. 1: enable 0: disable.*/
|
|
uint32_t fread_dual: 1; /*In the read operations read-data phase apply 2 signals. 1: enable 0: disable.*/
|
|
uint32_t resandres: 1; /*The Device ID is read out to SPI_RD_STATUS register, this bit combine with spi_flash_res bit. 1: enable 0: disable.*/
|
|
uint32_t reserved16: 4; /*reserved*/
|
|
uint32_t fread_quad: 1; /*In the read operations read-data phase apply 4 signals. 1: enable 0: disable.*/
|
|
uint32_t wp: 1; /*Write protect signal output when SPI is idle. 1: output high 0: output low.*/
|
|
uint32_t wrsr_2b: 1; /*two bytes data will be written to status register when it is set. 1: enable 0: disable.*/
|
|
uint32_t fread_dio: 1; /*In the read operations address phase and read-data phase apply 2 signals. 1: enable 0: disable.*/
|
|
uint32_t fread_qio: 1; /*In the read operations address phase and read-data phase apply 4 signals. 1: enable 0: disable.*/
|
|
uint32_t rd_bit_order: 1; /*In read-data (MISO) phase 1: LSB first 0: MSB first*/
|
|
uint32_t wr_bit_order: 1; /*In command address write-data (MOSI) phases 1: LSB firs 0: MSB first*/
|
|
uint32_t reserved27: 5; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} ctrl;
|
|
union {
|
|
struct {
|
|
uint32_t reserved0: 16; /*reserved*/
|
|
uint32_t cs_hold_delay_res:12; /*Delay cycles of resume Flash when resume Flash is enable by spi clock.*/
|
|
uint32_t cs_hold_delay: 4; /*SPI cs signal is delayed by spi clock cycles*/
|
|
};
|
|
uint32_t val;
|
|
} ctrl1;
|
|
union {
|
|
struct {
|
|
uint32_t status: 16; /*In the slave mode, it is the status for master to read out.*/
|
|
uint32_t wb_mode: 8; /*Mode bits in the flash fast read mode, it is combined with spi_fastrd_mode bit.*/
|
|
uint32_t status_ext: 8; /*In the slave mode,it is the status for master to read out.*/
|
|
};
|
|
uint32_t val;
|
|
} rd_status;
|
|
union {
|
|
struct {
|
|
uint32_t setup_time: 4; /*(cycles-1) of ,prepare, phase by spi clock, this bits combined with spi_cs_setup bit.*/
|
|
uint32_t hold_time: 4; /*delay cycles of cs pin by spi clock, this bits combined with spi_cs_hold bit.*/
|
|
uint32_t ck_out_low_mode: 4; /*modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_L bits.*/
|
|
uint32_t ck_out_high_mode: 4; /*modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_H bits.*/
|
|
uint32_t miso_delay_mode: 2; /*MISO signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
|
|
uint32_t miso_delay_num: 3; /*MISO signals are delayed by system clock cycles*/
|
|
uint32_t mosi_delay_mode: 2; /*MOSI signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
|
|
uint32_t mosi_delay_num: 3; /*MOSI signals are delayed by system clock cycles*/
|
|
uint32_t cs_delay_mode: 2; /*spi_cs signal is delayed by spi_clk . 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
|
|
uint32_t cs_delay_num: 4; /*spi_cs signal is delayed by system clock cycles*/
|
|
};
|
|
uint32_t val;
|
|
} ctrl2;
|
|
union {
|
|
struct {
|
|
uint32_t clkcnt_l: 6; /*In the master mode it must be equal to spi_clkcnt_N. In the slave mode it must be 0.*/
|
|
uint32_t clkcnt_h: 6; /*In the master mode it must be floor((spi_clkcnt_N+1)/2-1). In the slave mode it must be 0.*/
|
|
uint32_t clkcnt_n: 6; /*In the master mode it is the divider of spi_clk. So spi_clk frequency is system/(spi_clkdiv_pre+1)/(spi_clkcnt_N+1)*/
|
|
uint32_t clkdiv_pre: 13; /*In the master mode it is pre-divider of spi_clk.*/
|
|
uint32_t clk_equ_sysclk: 1; /*In the master mode 1: spi_clk is eqaul to system 0: spi_clk is divided from system clock.*/
|
|
};
|
|
uint32_t val;
|
|
} clock;
|
|
union {
|
|
struct {
|
|
uint32_t doutdin: 1; /*Set the bit to enable full duplex communication. 1: enable 0: disable.*/
|
|
uint32_t reserved1: 3; /*reserved*/
|
|
uint32_t cs_hold: 1; /*spi cs keep low when spi is in ,done, phase. 1: enable 0: disable.*/
|
|
uint32_t cs_setup: 1; /*spi cs is enable when spi is in ,prepare, phase. 1: enable 0: disable.*/
|
|
uint32_t ck_i_edge: 1; /*In the slave mode the bit is same as spi_ck_out_edge in master mode. It is combined with spi_miso_delay_mode bits.*/
|
|
uint32_t ck_out_edge: 1; /*the bit combined with spi_mosi_delay_mode bits to set mosi signal delay mode.*/
|
|
uint32_t reserved8: 2; /*reserved*/
|
|
uint32_t rd_byte_order: 1; /*In read-data (MISO) phase 1: big-endian 0: little_endian*/
|
|
uint32_t wr_byte_order: 1; /*In command address write-data (MOSI) phases 1: big-endian 0: litte_endian*/
|
|
uint32_t fwrite_dual: 1; /*In the write operations read-data phase apply 2 signals*/
|
|
uint32_t fwrite_quad: 1; /*In the write operations read-data phase apply 4 signals*/
|
|
uint32_t fwrite_dio: 1; /*In the write operations address phase and read-data phase apply 2 signals.*/
|
|
uint32_t fwrite_qio: 1; /*In the write operations address phase and read-data phase apply 4 signals.*/
|
|
uint32_t sio: 1; /*Set the bit to enable 3-line half duplex communication mosi and miso signals share the same pin. 1: enable 0: disable.*/
|
|
uint32_t usr_hold_pol: 1; /*It is combined with hold bits to set the polarity of spi hold line 1: spi will be held when spi hold line is high 0: spi will be held when spi hold line is low*/
|
|
uint32_t usr_dout_hold: 1; /*spi is hold at data out state the bit combined with spi_usr_hold_pol bit.*/
|
|
uint32_t usr_din_hold: 1; /*spi is hold at data in state the bit combined with spi_usr_hold_pol bit.*/
|
|
uint32_t usr_dummy_hold: 1; /*spi is hold at dummy state the bit combined with spi_usr_hold_pol bit.*/
|
|
uint32_t usr_addr_hold: 1; /*spi is hold at address state the bit combined with spi_usr_hold_pol bit.*/
|
|
uint32_t usr_cmd_hold: 1; /*spi is hold at command state the bit combined with spi_usr_hold_pol bit.*/
|
|
uint32_t usr_prep_hold: 1; /*spi is hold at prepare state the bit combined with spi_usr_hold_pol bit.*/
|
|
uint32_t usr_miso_highpart: 1; /*read-data phase only access to high-part of the buffer spi_w8~spi_w15. 1: enable 0: disable.*/
|
|
uint32_t usr_mosi_highpart: 1; /*write-data phase only access to high-part of the buffer spi_w8~spi_w15. 1: enable 0: disable.*/
|
|
uint32_t usr_dummy_idle: 1; /*spi clock is disable in dummy phase when the bit is enable.*/
|
|
uint32_t usr_mosi: 1; /*This bit enable the write-data phase of an operation.*/
|
|
uint32_t usr_miso: 1; /*This bit enable the read-data phase of an operation.*/
|
|
uint32_t usr_dummy: 1; /*This bit enable the dummy phase of an operation.*/
|
|
uint32_t usr_addr: 1; /*This bit enable the address phase of an operation.*/
|
|
uint32_t usr_command: 1; /*This bit enable the command phase of an operation.*/
|
|
};
|
|
uint32_t val;
|
|
} user;
|
|
union {
|
|
struct {
|
|
uint32_t usr_dummy_cyclelen: 8; /*The length in spi_clk cycles of dummy phase. The register value shall be (cycle_num-1).*/
|
|
uint32_t reserved8: 18; /*reserved*/
|
|
uint32_t usr_addr_bitlen: 6; /*The length in bits of address phase. The register value shall be (bit_num-1).*/
|
|
};
|
|
uint32_t val;
|
|
} user1;
|
|
union {
|
|
struct {
|
|
uint32_t usr_command_value: 16; /*The value of command.*/
|
|
uint32_t reserved16: 12; /*reserved*/
|
|
uint32_t usr_command_bitlen: 4; /*The length in bits of command phase. The register value shall be (bit_num-1)*/
|
|
};
|
|
uint32_t val;
|
|
} user2;
|
|
union {
|
|
struct {
|
|
uint32_t usr_mosi_dbitlen:24; /*The length in bits of write-data. The register value shall be (bit_num-1).*/
|
|
uint32_t reserved24: 8; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} mosi_dlen;
|
|
union {
|
|
struct {
|
|
uint32_t usr_miso_dbitlen:24; /*The length in bits of read-data. The register value shall be (bit_num-1).*/
|
|
uint32_t reserved24: 8; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} miso_dlen;
|
|
uint32_t slv_wr_status; /*In the slave mode this register are the status register for the master to write into. In the master mode this register are the higher 32bits in the 64 bits address condition.*/
|
|
union {
|
|
struct {
|
|
uint32_t cs0_dis: 1; /*SPI CS0 pin enable, 1: disable CS0, 0: spi_cs0 signal is from/to CS0 pin*/
|
|
uint32_t cs1_dis: 1; /*SPI CS1 pin enable, 1: disable CS1, 0: spi_cs1 signal is from/to CS1 pin*/
|
|
uint32_t cs2_dis: 1; /*SPI CS2 pin enable, 1: disable CS2, 0: spi_cs2 signal is from/to CS2 pin*/
|
|
uint32_t reserved3: 2; /*reserved*/
|
|
uint32_t ck_dis: 1; /*1: spi clk out disable 0: spi clk out enable*/
|
|
uint32_t master_cs_pol: 5; /*In the master mode the bits are the polarity of spi cs line the value is equivalent to spi_cs ^ spi_master_cs_pol.*/
|
|
uint32_t master_ck_sel: 5; /*In the master mode spi cs line is enable as spi clk it is combined with spi_cs0_dis spi_cs1_dis spi_cs2_dis.*/
|
|
uint32_t reserved16: 13; /*reserved*/
|
|
uint32_t ck_idle_edge: 1; /*1: spi clk line is high when idle 0: spi clk line is low when idle*/
|
|
uint32_t cs_keep_active: 1; /*spi cs line keep low when the bit is set.*/
|
|
uint32_t reserved31: 1; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} pin;
|
|
union {
|
|
struct {
|
|
uint32_t rd_buf_done: 1; /*The interrupt raw bit for the completion of read-buffer operation in the slave mode.*/
|
|
uint32_t wr_buf_done: 1; /*The interrupt raw bit for the completion of write-buffer operation in the slave mode.*/
|
|
uint32_t rd_sta_done: 1; /*The interrupt raw bit for the completion of read-status operation in the slave mode.*/
|
|
uint32_t wr_sta_done: 1; /*The interrupt raw bit for the completion of write-status operation in the slave mode.*/
|
|
uint32_t trans_done: 1; /*The interrupt raw bit for the completion of any operation in both the master mode and the slave mode.*/
|
|
uint32_t int_en: 5; /*Interrupt enable bits for the below 5 sources*/
|
|
uint32_t cs_i_mode: 2; /*In the slave mode this bits used to synchronize the input spi cs signal and eliminate spi cs jitter.*/
|
|
uint32_t reserved12: 5; /*reserved*/
|
|
uint32_t last_command: 3; /*In the slave mode it is the value of command.*/
|
|
uint32_t last_state: 3; /*In the slave mode it is the state of spi state machine.*/
|
|
uint32_t trans_cnt: 4; /*The operations counter in both the master mode and the slave mode. 4: read-status*/
|
|
uint32_t cmd_define: 1; /*1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer.*/
|
|
uint32_t wr_rd_sta_en: 1; /*write and read status enable in the slave mode*/
|
|
uint32_t wr_rd_buf_en: 1; /*write and read buffer enable in the slave mode*/
|
|
uint32_t slave_mode: 1; /*1: slave mode 0: master mode.*/
|
|
uint32_t sync_reset: 1; /*Software reset enable, reset the spi clock line cs line and data lines.*/
|
|
};
|
|
uint32_t val;
|
|
} slave;
|
|
union {
|
|
struct {
|
|
uint32_t rdbuf_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for read-buffer operations.*/
|
|
uint32_t wrbuf_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for write-buffer operations.*/
|
|
uint32_t rdsta_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for read-status operations.*/
|
|
uint32_t wrsta_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for write-status operations.*/
|
|
uint32_t wr_addr_bitlen: 6; /*In the slave mode it is the address length in bits for write-buffer operation. The register value shall be (bit_num-1).*/
|
|
uint32_t rd_addr_bitlen: 6; /*In the slave mode it is the address length in bits for read-buffer operation. The register value shall be (bit_num-1).*/
|
|
uint32_t reserved16: 9; /*reserved*/
|
|
uint32_t status_readback: 1; /*In the slave mode 1:read register of SPI_SLV_WR_STATUS 0: read register of SPI_RD_STATUS.*/
|
|
uint32_t status_fast_en: 1; /*In the slave mode enable fast read status.*/
|
|
uint32_t status_bitlen: 5; /*In the slave mode it is the length of status bit.*/
|
|
};
|
|
uint32_t val;
|
|
} slave1;
|
|
union {
|
|
struct {
|
|
uint32_t rdsta_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for read-status operations. The register value shall be (cycle_num-1).*/
|
|
uint32_t wrsta_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for write-status operations. The register value shall be (cycle_num-1).*/
|
|
uint32_t rdbuf_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for read-buffer operations. The register value shall be (cycle_num-1).*/
|
|
uint32_t wrbuf_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for write-buffer operations. The register value shall be (cycle_num-1).*/
|
|
};
|
|
uint32_t val;
|
|
} slave2;
|
|
union {
|
|
struct {
|
|
uint32_t rdbuf_cmd_value: 8; /*In the slave mode it is the value of read-buffer command.*/
|
|
uint32_t wrbuf_cmd_value: 8; /*In the slave mode it is the value of write-buffer command.*/
|
|
uint32_t rdsta_cmd_value: 8; /*In the slave mode it is the value of read-status command.*/
|
|
uint32_t wrsta_cmd_value: 8; /*In the slave mode it is the value of write-status command.*/
|
|
};
|
|
uint32_t val;
|
|
} slave3;
|
|
union {
|
|
struct {
|
|
uint32_t bit_len: 24; /*In the slave mode it is the length in bits for write-buffer operations. The register value shall be (bit_num-1).*/
|
|
uint32_t reserved24: 8; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} slv_wrbuf_dlen;
|
|
union {
|
|
struct {
|
|
uint32_t bit_len: 24; /*In the slave mode it is the length in bits for read-buffer operations. The register value shall be (bit_num-1).*/
|
|
uint32_t reserved24: 8; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} slv_rdbuf_dlen;
|
|
union {
|
|
struct {
|
|
uint32_t req_en: 1; /*For SPI0 Cache access enable 1: enable 0:disable.*/
|
|
uint32_t usr_cmd_4byte: 1; /*For SPI0 cache read flash with 4 bytes command 1: enable 0:disable.*/
|
|
uint32_t flash_usr_cmd: 1; /*For SPI0 cache read flash for user define command 1: enable 0:disable.*/
|
|
uint32_t flash_pes_en: 1; /*For SPI0 spi1 send suspend command before cache read flash 1: enable 0:disable.*/
|
|
uint32_t reserved4: 28; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} cache_fctrl;
|
|
union {
|
|
struct {
|
|
uint32_t reserved0: 1; /*reserved*/
|
|
uint32_t usr_sram_dio: 1; /*For SPI0 In the spi sram mode spi dual I/O mode enable 1: enable 0:disable*/
|
|
uint32_t usr_sram_qio: 1; /*For SPI0 In the spi sram mode spi quad I/O mode enable 1: enable 0:disable*/
|
|
uint32_t usr_wr_sram_dummy: 1; /*For SPI0 In the spi sram mode it is the enable bit of dummy phase for write operations.*/
|
|
uint32_t usr_rd_sram_dummy: 1; /*For SPI0 In the spi sram mode it is the enable bit of dummy phase for read operations.*/
|
|
uint32_t cache_sram_usr_rcmd: 1; /*For SPI0 In the spi sram mode cache read sram for user define command.*/
|
|
uint32_t sram_bytes_len: 8; /*For SPI0 In the sram mode it is the byte length of spi read sram data.*/
|
|
uint32_t sram_dummy_cyclelen: 8; /*For SPI0 In the sram mode it is the length in bits of address phase. The register value shall be (bit_num-1).*/
|
|
uint32_t sram_addr_bitlen: 6; /*For SPI0 In the sram mode it is the length in bits of address phase. The register value shall be (bit_num-1).*/
|
|
uint32_t cache_sram_usr_wcmd: 1; /*For SPI0 In the spi sram mode cache write sram for user define command*/
|
|
uint32_t reserved29: 3; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} cache_sctrl;
|
|
union {
|
|
struct {
|
|
uint32_t dio: 1; /*For SPI0 SRAM DIO mode enable . SRAM DIO enable command will be send when the bit is set. The bit will be cleared once the operation done.*/
|
|
uint32_t qio: 1; /*For SPI0 SRAM QIO mode enable . SRAM QIO enable command will be send when the bit is set. The bit will be cleared once the operation done.*/
|
|
uint32_t reserved2: 2; /*For SPI0 SRAM write enable . SRAM write operation will be triggered when the bit is set. The bit will be cleared once the operation done.*/
|
|
uint32_t rst_io: 1; /*For SPI0 SRAM IO mode reset enable. SRAM IO mode reset operation will be triggered when the bit is set. The bit will be cleared once the operation done*/
|
|
uint32_t reserved5:27; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} sram_cmd;
|
|
union {
|
|
struct {
|
|
uint32_t usr_rd_cmd_value: 16; /*For SPI0 When cache mode is enable it is the read command value of command phase for SRAM.*/
|
|
uint32_t reserved16: 12; /*reserved*/
|
|
uint32_t usr_rd_cmd_bitlen: 4; /*For SPI0 When cache mode is enable it is the length in bits of command phase for SRAM. The register value shall be (bit_num-1).*/
|
|
};
|
|
uint32_t val;
|
|
} sram_drd_cmd;
|
|
union {
|
|
struct {
|
|
uint32_t usr_wr_cmd_value: 16; /*For SPI0 When cache mode is enable it is the write command value of command phase for SRAM.*/
|
|
uint32_t reserved16: 12; /*reserved*/
|
|
uint32_t usr_wr_cmd_bitlen: 4; /*For SPI0 When cache mode is enable it is the in bits of command phase for SRAM. The register value shall be (bit_num-1).*/
|
|
};
|
|
uint32_t val;
|
|
} sram_dwr_cmd;
|
|
union {
|
|
struct {
|
|
uint32_t slv_rdata_bit:24; /*In the slave mode it is the bit length of read data. The value is the length - 1.*/
|
|
uint32_t reserved24: 8; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} slv_rd_bit;
|
|
uint32_t reserved_68;
|
|
uint32_t reserved_6c;
|
|
uint32_t reserved_70;
|
|
uint32_t reserved_74;
|
|
uint32_t reserved_78;
|
|
uint32_t reserved_7c;
|
|
uint32_t data_buf[16]; /*data buffer*/
|
|
uint32_t tx_crc; /*For SPI1 the value of crc32 for 256 bits data.*/
|
|
uint32_t reserved_c4;
|
|
uint32_t reserved_c8;
|
|
uint32_t reserved_cc;
|
|
uint32_t reserved_d0;
|
|
uint32_t reserved_d4;
|
|
uint32_t reserved_d8;
|
|
uint32_t reserved_dc;
|
|
uint32_t reserved_e0;
|
|
uint32_t reserved_e4;
|
|
uint32_t reserved_e8;
|
|
uint32_t reserved_ec;
|
|
union {
|
|
struct {
|
|
uint32_t t_pp_time: 12; /*page program delay time by system clock.*/
|
|
uint32_t reserved12: 4; /*reserved*/
|
|
uint32_t t_pp_shift: 4; /*page program delay time shift .*/
|
|
uint32_t reserved20:11; /*reserved*/
|
|
uint32_t t_pp_ena: 1; /*page program delay enable.*/
|
|
};
|
|
uint32_t val;
|
|
} ext0;
|
|
union {
|
|
struct {
|
|
uint32_t t_erase_time: 12; /*erase flash delay time by system clock.*/
|
|
uint32_t reserved12: 4; /*reserved*/
|
|
uint32_t t_erase_shift: 4; /*erase flash delay time shift.*/
|
|
uint32_t reserved20: 11; /*reserved*/
|
|
uint32_t t_erase_ena: 1; /*erase flash delay enable.*/
|
|
};
|
|
uint32_t val;
|
|
} ext1;
|
|
union {
|
|
struct {
|
|
uint32_t st: 3; /*The status of spi state machine .*/
|
|
uint32_t reserved3: 29; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} ext2;
|
|
union {
|
|
struct {
|
|
uint32_t int_hold_ena: 2; /*This register is for two SPI masters to share the same cs clock and data signals. The bits of one SPI are set if the other SPI is busy the SPI will be hold. 1(3): hold at ,idle, phase 2: hold at ,prepare, phase.*/
|
|
uint32_t reserved2: 30; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} ext3;
|
|
union {
|
|
struct {
|
|
uint32_t reserved0: 2; /*reserved*/
|
|
uint32_t in_rst: 1; /*The bit is used to reset in dma fsm and in data fifo pointer.*/
|
|
uint32_t out_rst: 1; /*The bit is used to reset out dma fsm and out data fifo pointer.*/
|
|
uint32_t ahbm_fifo_rst: 1; /*reset spi dma ahb master fifo pointer.*/
|
|
uint32_t ahbm_rst: 1; /*reset spi dma ahb master.*/
|
|
uint32_t in_loop_test: 1; /*Set bit to test in link.*/
|
|
uint32_t out_loop_test: 1; /*Set bit to test out link.*/
|
|
uint32_t out_auto_wrback: 1; /*when the link is empty jump to next automatically.*/
|
|
uint32_t out_eof_mode: 1; /*out eof flag generation mode . 1: when dma pop all data from fifo 0:when ahb push all data to fifo.*/
|
|
uint32_t outdscr_burst_en: 1; /*read descriptor use burst mode when read data for memory.*/
|
|
uint32_t indscr_burst_en: 1; /*read descriptor use burst mode when write data to memory.*/
|
|
uint32_t out_data_burst_en: 1; /*spi dma read data from memory in burst mode.*/
|
|
uint32_t reserved13: 1; /*reserved*/
|
|
uint32_t dma_rx_stop: 1; /*spi dma read data stop when in continue tx/rx mode.*/
|
|
uint32_t dma_tx_stop: 1; /*spi dma write data stop when in continue tx/rx mode.*/
|
|
uint32_t dma_continue: 1; /*spi dma continue tx/rx data.*/
|
|
uint32_t reserved17: 15; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} dma_conf;
|
|
union {
|
|
struct {
|
|
uint32_t addr: 20; /*The address of the first outlink descriptor.*/
|
|
uint32_t reserved20: 8; /*reserved*/
|
|
uint32_t stop: 1; /*Set the bit to stop to use outlink descriptor.*/
|
|
uint32_t start: 1; /*Set the bit to start to use outlink descriptor.*/
|
|
uint32_t restart: 1; /*Set the bit to mount on new outlink descriptors.*/
|
|
uint32_t reserved31: 1; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} dma_out_link;
|
|
union {
|
|
struct {
|
|
uint32_t addr: 20; /*The address of the first inlink descriptor.*/
|
|
uint32_t auto_ret: 1; /*when the bit is set inlink descriptor returns to the next descriptor while a packet is wrong*/
|
|
uint32_t reserved21: 7; /*reserved*/
|
|
uint32_t stop: 1; /*Set the bit to stop to use inlink descriptor.*/
|
|
uint32_t start: 1; /*Set the bit to start to use inlink descriptor.*/
|
|
uint32_t restart: 1; /*Set the bit to mount on new inlink descriptors.*/
|
|
uint32_t reserved31: 1; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} dma_in_link;
|
|
union {
|
|
struct {
|
|
uint32_t rx_en: 1; /*spi dma read data status bit.*/
|
|
uint32_t tx_en: 1; /*spi dma write data status bit.*/
|
|
uint32_t reserved2: 30; /*spi dma read data from memory count.*/
|
|
};
|
|
uint32_t val;
|
|
} dma_status;
|
|
union {
|
|
struct {
|
|
uint32_t inlink_dscr_empty: 1; /*The enable bit for lack of enough inlink descriptors.*/
|
|
uint32_t outlink_dscr_error: 1; /*The enable bit for outlink descriptor error.*/
|
|
uint32_t inlink_dscr_error: 1; /*The enable bit for inlink descriptor error.*/
|
|
uint32_t in_done: 1; /*The enable bit for completing usage of a inlink descriptor.*/
|
|
uint32_t in_err_eof: 1; /*The enable bit for receiving error.*/
|
|
uint32_t in_suc_eof: 1; /*The enable bit for completing receiving all the packets from host.*/
|
|
uint32_t out_done: 1; /*The enable bit for completing usage of a outlink descriptor .*/
|
|
uint32_t out_eof: 1; /*The enable bit for sending a packet to host done.*/
|
|
uint32_t out_total_eof: 1; /*The enable bit for sending all the packets to host done.*/
|
|
uint32_t reserved9: 23; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} dma_int_ena;
|
|
union {
|
|
struct {
|
|
uint32_t inlink_dscr_empty: 1; /*The raw bit for lack of enough inlink descriptors.*/
|
|
uint32_t outlink_dscr_error: 1; /*The raw bit for outlink descriptor error.*/
|
|
uint32_t inlink_dscr_error: 1; /*The raw bit for inlink descriptor error.*/
|
|
uint32_t in_done: 1; /*The raw bit for completing usage of a inlink descriptor.*/
|
|
uint32_t in_err_eof: 1; /*The raw bit for receiving error.*/
|
|
uint32_t in_suc_eof: 1; /*The raw bit for completing receiving all the packets from host.*/
|
|
uint32_t out_done: 1; /*The raw bit for completing usage of a outlink descriptor.*/
|
|
uint32_t out_eof: 1; /*The raw bit for sending a packet to host done.*/
|
|
uint32_t out_total_eof: 1; /*The raw bit for sending all the packets to host done.*/
|
|
uint32_t reserved9: 23; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} dma_int_raw;
|
|
union {
|
|
struct {
|
|
uint32_t inlink_dscr_empty: 1; /*The status bit for lack of enough inlink descriptors.*/
|
|
uint32_t outlink_dscr_error: 1; /*The status bit for outlink descriptor error.*/
|
|
uint32_t inlink_dscr_error: 1; /*The status bit for inlink descriptor error.*/
|
|
uint32_t in_done: 1; /*The status bit for completing usage of a inlink descriptor.*/
|
|
uint32_t in_err_eof: 1; /*The status bit for receiving error.*/
|
|
uint32_t in_suc_eof: 1; /*The status bit for completing receiving all the packets from host.*/
|
|
uint32_t out_done: 1; /*The status bit for completing usage of a outlink descriptor.*/
|
|
uint32_t out_eof: 1; /*The status bit for sending a packet to host done.*/
|
|
uint32_t out_total_eof: 1; /*The status bit for sending all the packets to host done.*/
|
|
uint32_t reserved9: 23; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} dma_int_st;
|
|
union {
|
|
struct {
|
|
uint32_t inlink_dscr_empty: 1; /*The clear bit for lack of enough inlink descriptors.*/
|
|
uint32_t outlink_dscr_error: 1; /*The clear bit for outlink descriptor error.*/
|
|
uint32_t inlink_dscr_error: 1; /*The clear bit for inlink descriptor error.*/
|
|
uint32_t in_done: 1; /*The clear bit for completing usage of a inlink descriptor.*/
|
|
uint32_t in_err_eof: 1; /*The clear bit for receiving error.*/
|
|
uint32_t in_suc_eof: 1; /*The clear bit for completing receiving all the packets from host.*/
|
|
uint32_t out_done: 1; /*The clear bit for completing usage of a outlink descriptor.*/
|
|
uint32_t out_eof: 1; /*The clear bit for sending a packet to host done.*/
|
|
uint32_t out_total_eof: 1; /*The clear bit for sending all the packets to host done.*/
|
|
uint32_t reserved9: 23; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} dma_int_clr;
|
|
uint32_t dma_in_err_eof_des_addr; /*The inlink descriptor address when spi dma produce receiving error.*/
|
|
uint32_t dma_in_suc_eof_des_addr; /*The last inlink descriptor address when spi dma produce from_suc_eof.*/
|
|
uint32_t dma_inlink_dscr; /*The content of current in descriptor pointer.*/
|
|
uint32_t dma_inlink_dscr_bf0; /*The content of next in descriptor pointer.*/
|
|
uint32_t dma_inlink_dscr_bf1; /*The content of current in descriptor data buffer pointer.*/
|
|
uint32_t dma_out_eof_bfr_des_addr; /*The address of buffer relative to the outlink descriptor that produce eof.*/
|
|
uint32_t dma_out_eof_des_addr; /*The last outlink descriptor address when spi dma produce to_eof.*/
|
|
uint32_t dma_outlink_dscr; /*The content of current out descriptor pointer.*/
|
|
uint32_t dma_outlink_dscr_bf0; /*The content of next out descriptor pointer.*/
|
|
uint32_t dma_outlink_dscr_bf1; /*The content of current out descriptor data buffer pointer.*/
|
|
uint32_t dma_rx_status; /*spi dma read data from memory status.*/
|
|
uint32_t dma_tx_status; /*spi dma write data to memory status.*/
|
|
uint32_t reserved_150;
|
|
uint32_t reserved_154;
|
|
uint32_t reserved_158;
|
|
uint32_t reserved_15c;
|
|
uint32_t reserved_160;
|
|
uint32_t reserved_164;
|
|
uint32_t reserved_168;
|
|
uint32_t reserved_16c;
|
|
uint32_t reserved_170;
|
|
uint32_t reserved_174;
|
|
uint32_t reserved_178;
|
|
uint32_t reserved_17c;
|
|
uint32_t reserved_180;
|
|
uint32_t reserved_184;
|
|
uint32_t reserved_188;
|
|
uint32_t reserved_18c;
|
|
uint32_t reserved_190;
|
|
uint32_t reserved_194;
|
|
uint32_t reserved_198;
|
|
uint32_t reserved_19c;
|
|
uint32_t reserved_1a0;
|
|
uint32_t reserved_1a4;
|
|
uint32_t reserved_1a8;
|
|
uint32_t reserved_1ac;
|
|
uint32_t reserved_1b0;
|
|
uint32_t reserved_1b4;
|
|
uint32_t reserved_1b8;
|
|
uint32_t reserved_1bc;
|
|
uint32_t reserved_1c0;
|
|
uint32_t reserved_1c4;
|
|
uint32_t reserved_1c8;
|
|
uint32_t reserved_1cc;
|
|
uint32_t reserved_1d0;
|
|
uint32_t reserved_1d4;
|
|
uint32_t reserved_1d8;
|
|
uint32_t reserved_1dc;
|
|
uint32_t reserved_1e0;
|
|
uint32_t reserved_1e4;
|
|
uint32_t reserved_1e8;
|
|
uint32_t reserved_1ec;
|
|
uint32_t reserved_1f0;
|
|
uint32_t reserved_1f4;
|
|
uint32_t reserved_1f8;
|
|
uint32_t reserved_1fc;
|
|
uint32_t reserved_200;
|
|
uint32_t reserved_204;
|
|
uint32_t reserved_208;
|
|
uint32_t reserved_20c;
|
|
uint32_t reserved_210;
|
|
uint32_t reserved_214;
|
|
uint32_t reserved_218;
|
|
uint32_t reserved_21c;
|
|
uint32_t reserved_220;
|
|
uint32_t reserved_224;
|
|
uint32_t reserved_228;
|
|
uint32_t reserved_22c;
|
|
uint32_t reserved_230;
|
|
uint32_t reserved_234;
|
|
uint32_t reserved_238;
|
|
uint32_t reserved_23c;
|
|
uint32_t reserved_240;
|
|
uint32_t reserved_244;
|
|
uint32_t reserved_248;
|
|
uint32_t reserved_24c;
|
|
uint32_t reserved_250;
|
|
uint32_t reserved_254;
|
|
uint32_t reserved_258;
|
|
uint32_t reserved_25c;
|
|
uint32_t reserved_260;
|
|
uint32_t reserved_264;
|
|
uint32_t reserved_268;
|
|
uint32_t reserved_26c;
|
|
uint32_t reserved_270;
|
|
uint32_t reserved_274;
|
|
uint32_t reserved_278;
|
|
uint32_t reserved_27c;
|
|
uint32_t reserved_280;
|
|
uint32_t reserved_284;
|
|
uint32_t reserved_288;
|
|
uint32_t reserved_28c;
|
|
uint32_t reserved_290;
|
|
uint32_t reserved_294;
|
|
uint32_t reserved_298;
|
|
uint32_t reserved_29c;
|
|
uint32_t reserved_2a0;
|
|
uint32_t reserved_2a4;
|
|
uint32_t reserved_2a8;
|
|
uint32_t reserved_2ac;
|
|
uint32_t reserved_2b0;
|
|
uint32_t reserved_2b4;
|
|
uint32_t reserved_2b8;
|
|
uint32_t reserved_2bc;
|
|
uint32_t reserved_2c0;
|
|
uint32_t reserved_2c4;
|
|
uint32_t reserved_2c8;
|
|
uint32_t reserved_2cc;
|
|
uint32_t reserved_2d0;
|
|
uint32_t reserved_2d4;
|
|
uint32_t reserved_2d8;
|
|
uint32_t reserved_2dc;
|
|
uint32_t reserved_2e0;
|
|
uint32_t reserved_2e4;
|
|
uint32_t reserved_2e8;
|
|
uint32_t reserved_2ec;
|
|
uint32_t reserved_2f0;
|
|
uint32_t reserved_2f4;
|
|
uint32_t reserved_2f8;
|
|
uint32_t reserved_2fc;
|
|
uint32_t reserved_300;
|
|
uint32_t reserved_304;
|
|
uint32_t reserved_308;
|
|
uint32_t reserved_30c;
|
|
uint32_t reserved_310;
|
|
uint32_t reserved_314;
|
|
uint32_t reserved_318;
|
|
uint32_t reserved_31c;
|
|
uint32_t reserved_320;
|
|
uint32_t reserved_324;
|
|
uint32_t reserved_328;
|
|
uint32_t reserved_32c;
|
|
uint32_t reserved_330;
|
|
uint32_t reserved_334;
|
|
uint32_t reserved_338;
|
|
uint32_t reserved_33c;
|
|
uint32_t reserved_340;
|
|
uint32_t reserved_344;
|
|
uint32_t reserved_348;
|
|
uint32_t reserved_34c;
|
|
uint32_t reserved_350;
|
|
uint32_t reserved_354;
|
|
uint32_t reserved_358;
|
|
uint32_t reserved_35c;
|
|
uint32_t reserved_360;
|
|
uint32_t reserved_364;
|
|
uint32_t reserved_368;
|
|
uint32_t reserved_36c;
|
|
uint32_t reserved_370;
|
|
uint32_t reserved_374;
|
|
uint32_t reserved_378;
|
|
uint32_t reserved_37c;
|
|
uint32_t reserved_380;
|
|
uint32_t reserved_384;
|
|
uint32_t reserved_388;
|
|
uint32_t reserved_38c;
|
|
uint32_t reserved_390;
|
|
uint32_t reserved_394;
|
|
uint32_t reserved_398;
|
|
uint32_t reserved_39c;
|
|
uint32_t reserved_3a0;
|
|
uint32_t reserved_3a4;
|
|
uint32_t reserved_3a8;
|
|
uint32_t reserved_3ac;
|
|
uint32_t reserved_3b0;
|
|
uint32_t reserved_3b4;
|
|
uint32_t reserved_3b8;
|
|
uint32_t reserved_3bc;
|
|
uint32_t reserved_3c0;
|
|
uint32_t reserved_3c4;
|
|
uint32_t reserved_3c8;
|
|
uint32_t reserved_3cc;
|
|
uint32_t reserved_3d0;
|
|
uint32_t reserved_3d4;
|
|
uint32_t reserved_3d8;
|
|
uint32_t reserved_3dc;
|
|
uint32_t reserved_3e0;
|
|
uint32_t reserved_3e4;
|
|
uint32_t reserved_3e8;
|
|
uint32_t reserved_3ec;
|
|
uint32_t reserved_3f0;
|
|
uint32_t reserved_3f4;
|
|
uint32_t reserved_3f8;
|
|
union {
|
|
struct {
|
|
uint32_t date: 28; /*SPI register version.*/
|
|
uint32_t reserved28: 4; /*reserved*/
|
|
};
|
|
uint32_t val;
|
|
} date;
|
|
} spi_dev_t;
|
|
extern spi_dev_t SPI0; /* SPI0 IS FOR INTERNAL USE*/
|
|
extern spi_dev_t SPI1;
|
|
extern spi_dev_t SPI2;
|
|
extern spi_dev_t SPI3;
|
|
#endif /* _SOC_SPI_STRUCT_H_ */
|