1. Support built-in ADC for I2S. 2. Modify code of ADC, made no change to the original APIs. 3. Add APIs in I2S: esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel); 4. Add I2S ADC/DAC example code. 5. add old-fashion definition to make it more compatible 6. replase spi_flash_ APIs with esp_partition_ APIs 7. add example of generating audio table from wav 8. change example sound
53 lines
1.7 KiB
Markdown
Executable file
53 lines
1.7 KiB
Markdown
Executable file
# I2S built-in ADC/DAC Example
|
|
|
|
|
|
---
|
|
|
|
* This is an example of:
|
|
* Recording sound from ADC
|
|
* Replay the recorded sound via DAC
|
|
* Play an audio file in flash
|
|
|
|
---
|
|
|
|
* Run this example
|
|
* Set partition table to "partitions_adc_dac_example.csv" in menuconfig, or rename sdkconfig.default to sdkconfig directly.
|
|
* Set IDF_PATH and run "make flash"
|
|
---
|
|
|
|
* This example will execute the following steps:
|
|
1. Erase flash
|
|
2. Record audio from ADC and save in flash
|
|
3. Read flash and replay the sound via DAC
|
|
4. Play an example audio file(file format: 8bit/8khz/single channel)
|
|
5. Loop back to step 3
|
|
|
|
---
|
|
|
|
* Hardware connection:
|
|
|
|
| ESP32 | Microphone + amplifier | amplifier + speaker |
|
|
|--|--|--|
|
|
| GPIO36(ADC1CH0 input) | data output pin | |
|
|
| GPIO25(DAC1 output) | | right channel speaker input|
|
|
| GPIO26(DAC2 output) | | left channel speaker input|
|
|
|
|
---
|
|
|
|
* How to generate audio files:
|
|
|
|
* tools/generate_audio_file.py is an example of generate audio table from .wav files.
|
|
* In this example, the wav file must be in 16k/16bit mono format.
|
|
* generate_audio_file.py will bundle the wav files into a single table named audio_example_file.h
|
|
* Since the ADC can only play 8-bit data, the script will scale each 16-bit value to a 8-bit value.
|
|
* Since the ADC can only output positive value, the script will turn a signed value into an unsigned value.
|
|
|
|
---
|
|
|
|
* Note:
|
|
* DAC can only play 8-bit data, so the wav file data are scaled to 8-bit data.
|
|
* I2S DMA can only output 16-bit/32-bit data to DAC, DAC will only take the highest 8-bit data and output accordingly.
|
|
* Before I2S DMA can output data stream to DAC, the data format should be converted to 16-bit or 32-bit by padding zeros.
|
|
|
|
|
|
|