1893 lines
95 KiB
C
1893 lines
95 KiB
C
// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef _SOC_SPI_MEM_REG_H_
|
|
#define _SOC_SPI_MEM_REG_H_
|
|
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
#include "soc.h"
|
|
#define REG_SPI_MEM_BASE(i) (DR_REG_SPI0_BASE - (i) * 0x1000)
|
|
|
|
#define SPI_MEM_CMD_REG(i) (REG_SPI_MEM_BASE(i) + 0x000)
|
|
/* SPI_MEM_FLASH_READ : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: Read flash enable. Read flash operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_READ (BIT(31))
|
|
#define SPI_MEM_FLASH_READ_M (BIT(31))
|
|
#define SPI_MEM_FLASH_READ_V 0x1
|
|
#define SPI_MEM_FLASH_READ_S 31
|
|
/* SPI_MEM_FLASH_WREN : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: Write flash enable. Write enable command will be sent when the
|
|
bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_WREN (BIT(30))
|
|
#define SPI_MEM_FLASH_WREN_M (BIT(30))
|
|
#define SPI_MEM_FLASH_WREN_V 0x1
|
|
#define SPI_MEM_FLASH_WREN_S 30
|
|
/* SPI_MEM_FLASH_WRDI : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Write flash disable. Write disable command will be sent when
|
|
the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_WRDI (BIT(29))
|
|
#define SPI_MEM_FLASH_WRDI_M (BIT(29))
|
|
#define SPI_MEM_FLASH_WRDI_V 0x1
|
|
#define SPI_MEM_FLASH_WRDI_S 29
|
|
/* SPI_MEM_FLASH_RDID : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: Read JEDEC ID . Read ID command will be sent when the bit is
|
|
set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_RDID (BIT(28))
|
|
#define SPI_MEM_FLASH_RDID_M (BIT(28))
|
|
#define SPI_MEM_FLASH_RDID_V 0x1
|
|
#define SPI_MEM_FLASH_RDID_S 28
|
|
/* SPI_MEM_FLASH_RDSR : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: Read status register-1. Read status operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_RDSR (BIT(27))
|
|
#define SPI_MEM_FLASH_RDSR_M (BIT(27))
|
|
#define SPI_MEM_FLASH_RDSR_V 0x1
|
|
#define SPI_MEM_FLASH_RDSR_S 27
|
|
/* SPI_MEM_FLASH_WRSR : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: Write status register enable. Write status operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_WRSR (BIT(26))
|
|
#define SPI_MEM_FLASH_WRSR_M (BIT(26))
|
|
#define SPI_MEM_FLASH_WRSR_V 0x1
|
|
#define SPI_MEM_FLASH_WRSR_S 26
|
|
/* SPI_MEM_FLASH_PP : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: Page program enable(1 byte ~256 bytes data to be programmed).
|
|
Page program operation will be triggered when the bit is set. The bit will be cleared once the operation done .1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PP (BIT(25))
|
|
#define SPI_MEM_FLASH_PP_M (BIT(25))
|
|
#define SPI_MEM_FLASH_PP_V 0x1
|
|
#define SPI_MEM_FLASH_PP_S 25
|
|
/* SPI_MEM_FLASH_SE : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: Sector erase enable(4KB). Sector erase operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_SE (BIT(24))
|
|
#define SPI_MEM_FLASH_SE_M (BIT(24))
|
|
#define SPI_MEM_FLASH_SE_V 0x1
|
|
#define SPI_MEM_FLASH_SE_S 24
|
|
/* SPI_MEM_FLASH_BE : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: Block erase enable(32KB) . Block erase operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_BE (BIT(23))
|
|
#define SPI_MEM_FLASH_BE_M (BIT(23))
|
|
#define SPI_MEM_FLASH_BE_V 0x1
|
|
#define SPI_MEM_FLASH_BE_S 23
|
|
/* SPI_MEM_FLASH_CE : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: Chip erase enable. Chip erase operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_CE (BIT(22))
|
|
#define SPI_MEM_FLASH_CE_M (BIT(22))
|
|
#define SPI_MEM_FLASH_CE_V 0x1
|
|
#define SPI_MEM_FLASH_CE_S 22
|
|
/* SPI_MEM_FLASH_DP : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
/*description: Drive Flash into power down. An operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_DP (BIT(21))
|
|
#define SPI_MEM_FLASH_DP_M (BIT(21))
|
|
#define SPI_MEM_FLASH_DP_V 0x1
|
|
#define SPI_MEM_FLASH_DP_S 21
|
|
/* SPI_MEM_FLASH_RES : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: This bit combined with reg_resandres bit releases Flash from
|
|
the power-down state or high performance mode and obtains the devices ID. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_RES (BIT(20))
|
|
#define SPI_MEM_FLASH_RES_M (BIT(20))
|
|
#define SPI_MEM_FLASH_RES_V 0x1
|
|
#define SPI_MEM_FLASH_RES_S 20
|
|
/* SPI_MEM_FLASH_HPM : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
/*description: Drive Flash into high performance mode. The bit will be cleared
|
|
once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_HPM (BIT(19))
|
|
#define SPI_MEM_FLASH_HPM_M (BIT(19))
|
|
#define SPI_MEM_FLASH_HPM_V 0x1
|
|
#define SPI_MEM_FLASH_HPM_S 19
|
|
/* SPI_MEM_USR : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: User define command enable. An operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_USR (BIT(18))
|
|
#define SPI_MEM_USR_M (BIT(18))
|
|
#define SPI_MEM_USR_V 0x1
|
|
#define SPI_MEM_USR_S 18
|
|
/* SPI_MEM_FLASH_PE : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: In user mode it is set to indicate that program/erase operation
|
|
will be triggered. The bit is combined with spi_mem_usr bit. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PE (BIT(17))
|
|
#define SPI_MEM_FLASH_PE_M (BIT(17))
|
|
#define SPI_MEM_FLASH_PE_V 0x1
|
|
#define SPI_MEM_FLASH_PE_S 17
|
|
|
|
#define SPI_MEM_ADDR_REG(i) (REG_SPI_MEM_BASE(i) + 0x004)
|
|
/* SPI_MEM_USR_ADDR_VALUE : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: In user mode it is the memory address. other then the bit0-bit23
|
|
is the memory address the bit24-bit31 are the byte length of a transfer.*/
|
|
#define SPI_MEM_USR_ADDR_VALUE 0xFFFFFFFF
|
|
#define SPI_MEM_USR_ADDR_VALUE_M ((SPI_MEM_USR_ADDR_VALUE_V)<<(SPI_MEM_USR_ADDR_VALUE_S))
|
|
#define SPI_MEM_USR_ADDR_VALUE_V 0xFFFFFFFF
|
|
#define SPI_MEM_USR_ADDR_VALUE_S 0
|
|
|
|
#define SPI_MEM_CTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x008)
|
|
/* SPI_MEM_FREAD_QIO : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: In the read operations address phase and read-data phase apply
|
|
4 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_QIO (BIT(24))
|
|
#define SPI_MEM_FREAD_QIO_M (BIT(24))
|
|
#define SPI_MEM_FREAD_QIO_V 0x1
|
|
#define SPI_MEM_FREAD_QIO_S 24
|
|
/* SPI_MEM_FREAD_DIO : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: In the read operations address phase and read-data phase apply
|
|
2 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_DIO (BIT(23))
|
|
#define SPI_MEM_FREAD_DIO_M (BIT(23))
|
|
#define SPI_MEM_FREAD_DIO_V 0x1
|
|
#define SPI_MEM_FREAD_DIO_S 23
|
|
/* SPI_MEM_WRSR_2B : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: two bytes data will be written to status register when it is
|
|
set. 1: enable 0: disable.*/
|
|
#define SPI_MEM_WRSR_2B (BIT(22))
|
|
#define SPI_MEM_WRSR_2B_M (BIT(22))
|
|
#define SPI_MEM_WRSR_2B_V 0x1
|
|
#define SPI_MEM_WRSR_2B_S 22
|
|
/* SPI_MEM_WP_REG : R/W ;bitpos:[21] ;default: 1'b1 ; */
|
|
/*description: Write protect signal output when SPI is idle. 1: output high 0: output low.*/
|
|
#define SPI_MEM_WP_REG (BIT(21))
|
|
#define SPI_MEM_WP_REG_M (BIT(21))
|
|
#define SPI_MEM_WP_REG_V 0x1
|
|
#define SPI_MEM_WP_REG_S 21
|
|
/* SPI_MEM_FREAD_QUAD : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: In the read operations read-data phase apply 4 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_QUAD (BIT(20))
|
|
#define SPI_MEM_FREAD_QUAD_M (BIT(20))
|
|
#define SPI_MEM_FREAD_QUAD_V 0x1
|
|
#define SPI_MEM_FREAD_QUAD_S 20
|
|
/* SPI_MEM_D_POL : R/W ;bitpos:[19] ;default: 1'b1 ; */
|
|
/*description: The bit is used to set MOSI line polarity 1: high 0 low*/
|
|
#define SPI_MEM_D_POL (BIT(19))
|
|
#define SPI_MEM_D_POL_M (BIT(19))
|
|
#define SPI_MEM_D_POL_V 0x1
|
|
#define SPI_MEM_D_POL_S 19
|
|
/* SPI_MEM_Q_POL : R/W ;bitpos:[18] ;default: 1'b1 ; */
|
|
/*description: The bit is used to set MISO line polarity 1: high 0 low*/
|
|
#define SPI_MEM_Q_POL (BIT(18))
|
|
#define SPI_MEM_Q_POL_M (BIT(18))
|
|
#define SPI_MEM_Q_POL_V 0x1
|
|
#define SPI_MEM_Q_POL_S 18
|
|
/* SPI_MEM_RESANDRES : R/W ;bitpos:[15] ;default: 1'b1 ; */
|
|
/*description: The Device ID is read out to SPI_MEM_RD_STATUS register this
|
|
bit combine with spi_mem_flash_res bit. 1: enable 0: disable.*/
|
|
#define SPI_MEM_RESANDRES (BIT(15))
|
|
#define SPI_MEM_RESANDRES_M (BIT(15))
|
|
#define SPI_MEM_RESANDRES_V 0x1
|
|
#define SPI_MEM_RESANDRES_S 15
|
|
/* SPI_MEM_FREAD_DUAL : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: In the read operations read-data phase apply 2 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_DUAL (BIT(14))
|
|
#define SPI_MEM_FREAD_DUAL_M (BIT(14))
|
|
#define SPI_MEM_FREAD_DUAL_V 0x1
|
|
#define SPI_MEM_FREAD_DUAL_S 14
|
|
/* SPI_MEM_FASTRD_MODE : R/W ;bitpos:[13] ;default: 1'b1 ; */
|
|
/*description: This bit enable the bits: spi_mem_fread_qio spi_mem_fread_dio
|
|
spi_mem_fread_qout and spi_mem_fread_dout. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FASTRD_MODE (BIT(13))
|
|
#define SPI_MEM_FASTRD_MODE_M (BIT(13))
|
|
#define SPI_MEM_FASTRD_MODE_V 0x1
|
|
#define SPI_MEM_FASTRD_MODE_S 13
|
|
/* SPI_MEM_TX_CRC_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: For SPI1 enable crc32 when writing encrypted data to flash.
|
|
1: enable 0:disable*/
|
|
#define SPI_MEM_TX_CRC_EN (BIT(11))
|
|
#define SPI_MEM_TX_CRC_EN_M (BIT(11))
|
|
#define SPI_MEM_TX_CRC_EN_V 0x1
|
|
#define SPI_MEM_TX_CRC_EN_S 11
|
|
/* SPI_MEM_FCS_CRC_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: For SPI1 initialize crc32 module before writing encrypted data
|
|
to flash. Active low.*/
|
|
#define SPI_MEM_FCS_CRC_EN (BIT(10))
|
|
#define SPI_MEM_FCS_CRC_EN_M (BIT(10))
|
|
#define SPI_MEM_FCS_CRC_EN_V 0x1
|
|
#define SPI_MEM_FCS_CRC_EN_S 10
|
|
/* SPI_MEM_FCMD_QUAD : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: Apply 4 signals during command phase 1:enable 0: disable*/
|
|
#define SPI_MEM_FCMD_QUAD (BIT(8))
|
|
#define SPI_MEM_FCMD_QUAD_M (BIT(8))
|
|
#define SPI_MEM_FCMD_QUAD_V 0x1
|
|
#define SPI_MEM_FCMD_QUAD_S 8
|
|
/* SPI_MEM_FCMD_DUAL : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: Apply 2 signals during command phase 1:enable 0: disable*/
|
|
#define SPI_MEM_FCMD_DUAL (BIT(7))
|
|
#define SPI_MEM_FCMD_DUAL_M (BIT(7))
|
|
#define SPI_MEM_FCMD_DUAL_V 0x1
|
|
#define SPI_MEM_FCMD_DUAL_S 7
|
|
/* SPI_MEM_DUMMY_OUT : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: In the dummy phase the signal level of spi is output by the spi controller.*/
|
|
#define SPI_MEM_DUMMY_OUT (BIT(3))
|
|
#define SPI_MEM_DUMMY_OUT_M (BIT(3))
|
|
#define SPI_MEM_DUMMY_OUT_V 0x1
|
|
#define SPI_MEM_DUMMY_OUT_S 3
|
|
|
|
#define SPI_MEM_CTRL1_REG(i) (REG_SPI_MEM_BASE(i) + 0x00C)
|
|
/* SPI_MEM_CS_DLY_EDGE : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: The bit is used to select the spi clock edge to modify CS line timing.*/
|
|
#define SPI_MEM_CS_DLY_EDGE (BIT(31))
|
|
#define SPI_MEM_CS_DLY_EDGE_M (BIT(31))
|
|
#define SPI_MEM_CS_DLY_EDGE_V 0x1
|
|
#define SPI_MEM_CS_DLY_EDGE_S 31
|
|
/* SPI_MEM_CS_DLY_MODE : R/W ;bitpos:[30:28] ;default: 3'h0 ; */
|
|
/*description: The cs signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk*/
|
|
#define SPI_MEM_CS_DLY_MODE 0x00000007
|
|
#define SPI_MEM_CS_DLY_MODE_M ((SPI_MEM_CS_DLY_MODE_V)<<(SPI_MEM_CS_DLY_MODE_S))
|
|
#define SPI_MEM_CS_DLY_MODE_V 0x7
|
|
#define SPI_MEM_CS_DLY_MODE_S 28
|
|
/* SPI_MEM_CS_DLY_NUM : R/W ;bitpos:[27:26] ;default: 2'h0 ; */
|
|
/*description: spi_mem_cs signal is delayed by system clock cycles*/
|
|
#define SPI_MEM_CS_DLY_NUM 0x00000003
|
|
#define SPI_MEM_CS_DLY_NUM_M ((SPI_MEM_CS_DLY_NUM_V)<<(SPI_MEM_CS_DLY_NUM_S))
|
|
#define SPI_MEM_CS_DLY_NUM_V 0x3
|
|
#define SPI_MEM_CS_DLY_NUM_S 26
|
|
/* SPI_MEM_CS_HOLD_DLY : R/W ;bitpos:[25:14] ;default: 12'h1 ; */
|
|
/*description: SPI fsm is delayed to idle by spi clock cycles.*/
|
|
#define SPI_MEM_CS_HOLD_DLY 0x00000FFF
|
|
#define SPI_MEM_CS_HOLD_DLY_M ((SPI_MEM_CS_HOLD_DLY_V)<<(SPI_MEM_CS_HOLD_DLY_S))
|
|
#define SPI_MEM_CS_HOLD_DLY_V 0xFFF
|
|
#define SPI_MEM_CS_HOLD_DLY_S 14
|
|
/* SPI_MEM_CS_HOLD_DLY_RES : R/W ;bitpos:[13:2] ;default: 12'hfff ; */
|
|
/*description: Delay cycles of resume Flash when resume Flash from standby mode
|
|
is enable by spi clock.*/
|
|
#define SPI_MEM_CS_HOLD_DLY_RES 0x00000FFF
|
|
#define SPI_MEM_CS_HOLD_DLY_RES_M ((SPI_MEM_CS_HOLD_DLY_RES_V)<<(SPI_MEM_CS_HOLD_DLY_RES_S))
|
|
#define SPI_MEM_CS_HOLD_DLY_RES_V 0xFFF
|
|
#define SPI_MEM_CS_HOLD_DLY_RES_S 2
|
|
/* SPI_MEM_CLK_MODE : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: SPI clock mode bits. 0: SPI clock is off when CS inactive 1:
|
|
SPI clock is delayed one cycle after CS inactive 2: SPI clock is delayed two cycles after CS inactive 3: SPI clock is alwasy on.*/
|
|
#define SPI_MEM_CLK_MODE 0x00000003
|
|
#define SPI_MEM_CLK_MODE_M ((SPI_MEM_CLK_MODE_V)<<(SPI_MEM_CLK_MODE_S))
|
|
#define SPI_MEM_CLK_MODE_V 0x3
|
|
#define SPI_MEM_CLK_MODE_S 0
|
|
|
|
#define SPI_MEM_CTRL2_REG(i) (REG_SPI_MEM_BASE(i) + 0x010)
|
|
/* SPI_MEM_SYNC_RESET : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: The FSM will be reset.*/
|
|
#define SPI_MEM_SYNC_RESET (BIT(31))
|
|
#define SPI_MEM_SYNC_RESET_M (BIT(31))
|
|
#define SPI_MEM_SYNC_RESET_V 0x1
|
|
#define SPI_MEM_SYNC_RESET_S 31
|
|
/* SPI_MEM_CS_HOLD_TIME : R/W ;bitpos:[25:13] ;default: 13'h1 ; */
|
|
/*description: Spi cs signal is delayed to inactive by spi clock this bits are
|
|
combined with spi_mem_cs_hold bit.*/
|
|
#define SPI_MEM_CS_HOLD_TIME 0x00001FFF
|
|
#define SPI_MEM_CS_HOLD_TIME_M ((SPI_MEM_CS_HOLD_TIME_V)<<(SPI_MEM_CS_HOLD_TIME_S))
|
|
#define SPI_MEM_CS_HOLD_TIME_V 0x1FFF
|
|
#define SPI_MEM_CS_HOLD_TIME_S 13
|
|
/* SPI_MEM_CS_SETUP_TIME : R/W ;bitpos:[12:0] ;default: 13'h1 ; */
|
|
/*description: (cycles-1) of prepare phase by spi clock this bits are combined
|
|
with spi_mem_cs_setup bit.*/
|
|
#define SPI_MEM_CS_SETUP_TIME 0x00001FFF
|
|
#define SPI_MEM_CS_SETUP_TIME_M ((SPI_MEM_CS_SETUP_TIME_V)<<(SPI_MEM_CS_SETUP_TIME_S))
|
|
#define SPI_MEM_CS_SETUP_TIME_V 0x1FFF
|
|
#define SPI_MEM_CS_SETUP_TIME_S 0
|
|
|
|
#define SPI_MEM_CLOCK_REG(i) (REG_SPI_MEM_BASE(i) + 0x014)
|
|
/* SPI_MEM_CLK_EQU_SYSCLK : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: reserved*/
|
|
#define SPI_MEM_CLK_EQU_SYSCLK (BIT(31))
|
|
#define SPI_MEM_CLK_EQU_SYSCLK_M (BIT(31))
|
|
#define SPI_MEM_CLK_EQU_SYSCLK_V 0x1
|
|
#define SPI_MEM_CLK_EQU_SYSCLK_S 31
|
|
/* SPI_MEM_CLKCNT_N : R/W ;bitpos:[23:16] ;default: 8'h3 ; */
|
|
/*description: In the master mode it is the divider of spi_mem_clk. So spi_mem_clk
|
|
frequency is system/(spi_mem_clkcnt_N+1)*/
|
|
#define SPI_MEM_CLKCNT_N 0x000000FF
|
|
#define SPI_MEM_CLKCNT_N_M ((SPI_MEM_CLKCNT_N_V)<<(SPI_MEM_CLKCNT_N_S))
|
|
#define SPI_MEM_CLKCNT_N_V 0xFF
|
|
#define SPI_MEM_CLKCNT_N_S 16
|
|
/* SPI_MEM_CLKCNT_H : R/W ;bitpos:[15:8] ;default: 8'h1 ; */
|
|
/*description: In the master mode it must be floor((spi_mem_clkcnt_N+1)/2-1).*/
|
|
#define SPI_MEM_CLKCNT_H 0x000000FF
|
|
#define SPI_MEM_CLKCNT_H_M ((SPI_MEM_CLKCNT_H_V)<<(SPI_MEM_CLKCNT_H_S))
|
|
#define SPI_MEM_CLKCNT_H_V 0xFF
|
|
#define SPI_MEM_CLKCNT_H_S 8
|
|
/* SPI_MEM_CLKCNT_L : R/W ;bitpos:[7:0] ;default: 8'h3 ; */
|
|
/*description: In the master mode it must be equal to spi_mem_clkcnt_N.*/
|
|
#define SPI_MEM_CLKCNT_L 0x000000FF
|
|
#define SPI_MEM_CLKCNT_L_M ((SPI_MEM_CLKCNT_L_V)<<(SPI_MEM_CLKCNT_L_S))
|
|
#define SPI_MEM_CLKCNT_L_V 0xFF
|
|
#define SPI_MEM_CLKCNT_L_S 0
|
|
|
|
#define SPI_MEM_USER_REG(i) (REG_SPI_MEM_BASE(i) + 0x018)
|
|
/* SPI_MEM_USR_COMMAND : R/W ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: This bit enable the command phase of an operation.*/
|
|
#define SPI_MEM_USR_COMMAND (BIT(31))
|
|
#define SPI_MEM_USR_COMMAND_M (BIT(31))
|
|
#define SPI_MEM_USR_COMMAND_V 0x1
|
|
#define SPI_MEM_USR_COMMAND_S 31
|
|
/* SPI_MEM_USR_ADDR : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: This bit enable the address phase of an operation.*/
|
|
#define SPI_MEM_USR_ADDR (BIT(30))
|
|
#define SPI_MEM_USR_ADDR_M (BIT(30))
|
|
#define SPI_MEM_USR_ADDR_V 0x1
|
|
#define SPI_MEM_USR_ADDR_S 30
|
|
/* SPI_MEM_USR_DUMMY : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: This bit enable the dummy phase of an operation.*/
|
|
#define SPI_MEM_USR_DUMMY (BIT(29))
|
|
#define SPI_MEM_USR_DUMMY_M (BIT(29))
|
|
#define SPI_MEM_USR_DUMMY_V 0x1
|
|
#define SPI_MEM_USR_DUMMY_S 29
|
|
/* SPI_MEM_USR_MISO : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: This bit enable the read-data phase of an operation.*/
|
|
#define SPI_MEM_USR_MISO (BIT(28))
|
|
#define SPI_MEM_USR_MISO_M (BIT(28))
|
|
#define SPI_MEM_USR_MISO_V 0x1
|
|
#define SPI_MEM_USR_MISO_S 28
|
|
/* SPI_MEM_USR_MOSI : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: This bit enable the write-data phase of an operation.*/
|
|
#define SPI_MEM_USR_MOSI (BIT(27))
|
|
#define SPI_MEM_USR_MOSI_M (BIT(27))
|
|
#define SPI_MEM_USR_MOSI_V 0x1
|
|
#define SPI_MEM_USR_MOSI_S 27
|
|
/* SPI_MEM_USR_DUMMY_IDLE : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: spi clock is disable in dummy phase when the bit is enable.*/
|
|
#define SPI_MEM_USR_DUMMY_IDLE (BIT(26))
|
|
#define SPI_MEM_USR_DUMMY_IDLE_M (BIT(26))
|
|
#define SPI_MEM_USR_DUMMY_IDLE_V 0x1
|
|
#define SPI_MEM_USR_DUMMY_IDLE_S 26
|
|
/* SPI_MEM_USR_MOSI_HIGHPART : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: write-data phase only access to high-part of the buffer spi_mem_w8~spi_mem_w15.
|
|
1: enable 0: disable.*/
|
|
#define SPI_MEM_USR_MOSI_HIGHPART (BIT(25))
|
|
#define SPI_MEM_USR_MOSI_HIGHPART_M (BIT(25))
|
|
#define SPI_MEM_USR_MOSI_HIGHPART_V 0x1
|
|
#define SPI_MEM_USR_MOSI_HIGHPART_S 25
|
|
/* SPI_MEM_USR_MISO_HIGHPART : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: read-data phase only access to high-part of the buffer spi_mem_w8~spi_mem_w15.
|
|
1: enable 0: disable.*/
|
|
#define SPI_MEM_USR_MISO_HIGHPART (BIT(24))
|
|
#define SPI_MEM_USR_MISO_HIGHPART_M (BIT(24))
|
|
#define SPI_MEM_USR_MISO_HIGHPART_V 0x1
|
|
#define SPI_MEM_USR_MISO_HIGHPART_S 24
|
|
/* SPI_MEM_FWRITE_QIO : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: In the write operations address phase and read-data phase apply 4 signals.*/
|
|
#define SPI_MEM_FWRITE_QIO (BIT(15))
|
|
#define SPI_MEM_FWRITE_QIO_M (BIT(15))
|
|
#define SPI_MEM_FWRITE_QIO_V 0x1
|
|
#define SPI_MEM_FWRITE_QIO_S 15
|
|
/* SPI_MEM_FWRITE_DIO : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: In the write operations address phase and read-data phase apply 2 signals.*/
|
|
#define SPI_MEM_FWRITE_DIO (BIT(14))
|
|
#define SPI_MEM_FWRITE_DIO_M (BIT(14))
|
|
#define SPI_MEM_FWRITE_DIO_V 0x1
|
|
#define SPI_MEM_FWRITE_DIO_S 14
|
|
/* SPI_MEM_FWRITE_QUAD : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
/*description: In the write operations read-data phase apply 4 signals*/
|
|
#define SPI_MEM_FWRITE_QUAD (BIT(13))
|
|
#define SPI_MEM_FWRITE_QUAD_M (BIT(13))
|
|
#define SPI_MEM_FWRITE_QUAD_V 0x1
|
|
#define SPI_MEM_FWRITE_QUAD_S 13
|
|
/* SPI_MEM_FWRITE_DUAL : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: In the write operations read-data phase apply 2 signals*/
|
|
#define SPI_MEM_FWRITE_DUAL (BIT(12))
|
|
#define SPI_MEM_FWRITE_DUAL_M (BIT(12))
|
|
#define SPI_MEM_FWRITE_DUAL_V 0x1
|
|
#define SPI_MEM_FWRITE_DUAL_S 12
|
|
/* SPI_MEM_CK_OUT_EDGE : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: the bit combined with spi_mem_mosi_delay_mode bits to set mosi
|
|
signal delay mode.*/
|
|
#define SPI_MEM_CK_OUT_EDGE (BIT(9))
|
|
#define SPI_MEM_CK_OUT_EDGE_M (BIT(9))
|
|
#define SPI_MEM_CK_OUT_EDGE_V 0x1
|
|
#define SPI_MEM_CK_OUT_EDGE_S 9
|
|
/* SPI_MEM_CS_SETUP : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: spi cs is enable when spi is in prepare phase. 1: enable 0: disable.*/
|
|
#define SPI_MEM_CS_SETUP (BIT(7))
|
|
#define SPI_MEM_CS_SETUP_M (BIT(7))
|
|
#define SPI_MEM_CS_SETUP_V 0x1
|
|
#define SPI_MEM_CS_SETUP_S 7
|
|
/* SPI_MEM_CS_HOLD : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: spi cs keep low when spi is in done phase. 1: enable 0: disable.*/
|
|
#define SPI_MEM_CS_HOLD (BIT(6))
|
|
#define SPI_MEM_CS_HOLD_M (BIT(6))
|
|
#define SPI_MEM_CS_HOLD_V 0x1
|
|
#define SPI_MEM_CS_HOLD_S 6
|
|
|
|
#define SPI_MEM_USER1_REG(i) (REG_SPI_MEM_BASE(i) + 0x01C)
|
|
/* SPI_MEM_USR_ADDR_BITLEN : R/W ;bitpos:[31:26] ;default: 6'd23 ; */
|
|
/*description: The length in bits of address phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_USR_ADDR_BITLEN 0x0000003F
|
|
#define SPI_MEM_USR_ADDR_BITLEN_M ((SPI_MEM_USR_ADDR_BITLEN_V)<<(SPI_MEM_USR_ADDR_BITLEN_S))
|
|
#define SPI_MEM_USR_ADDR_BITLEN_V 0x3F
|
|
#define SPI_MEM_USR_ADDR_BITLEN_S 26
|
|
/* SPI_MEM_USR_DUMMY_CYCLELEN : R/W ;bitpos:[7:0] ;default: 8'd7 ; */
|
|
/*description: The length in spi_mem_clk cycles of dummy phase. The register
|
|
value shall be (cycle_num-1).*/
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN_M ((SPI_MEM_USR_DUMMY_CYCLELEN_V)<<(SPI_MEM_USR_DUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN_S 0
|
|
|
|
#define SPI_MEM_USER2_REG(i) (REG_SPI_MEM_BASE(i) + 0x020)
|
|
/* SPI_MEM_USR_COMMAND_BITLEN : R/W ;bitpos:[31:28] ;default: 4'd7 ; */
|
|
/*description: The length in bits of command phase. The register value shall be (bit_num-1)*/
|
|
#define SPI_MEM_USR_COMMAND_BITLEN 0x0000000F
|
|
#define SPI_MEM_USR_COMMAND_BITLEN_M ((SPI_MEM_USR_COMMAND_BITLEN_V)<<(SPI_MEM_USR_COMMAND_BITLEN_S))
|
|
#define SPI_MEM_USR_COMMAND_BITLEN_V 0xF
|
|
#define SPI_MEM_USR_COMMAND_BITLEN_S 28
|
|
/* SPI_MEM_USR_COMMAND_VALUE : R/W ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: The value of command.*/
|
|
#define SPI_MEM_USR_COMMAND_VALUE 0x0000FFFF
|
|
#define SPI_MEM_USR_COMMAND_VALUE_M ((SPI_MEM_USR_COMMAND_VALUE_V)<<(SPI_MEM_USR_COMMAND_VALUE_S))
|
|
#define SPI_MEM_USR_COMMAND_VALUE_V 0xFFFF
|
|
#define SPI_MEM_USR_COMMAND_VALUE_S 0
|
|
|
|
#define SPI_MEM_MOSI_DLEN_REG(i) (REG_SPI_MEM_BASE(i) + 0x024)
|
|
/* SPI_MEM_USR_MOSI_DBITLEN : R/W ;bitpos:[10:0] ;default: 11'h0 ; */
|
|
/*description: The length in bits of write-data. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_USR_MOSI_DBITLEN 0x000007FF
|
|
#define SPI_MEM_USR_MOSI_DBITLEN_M ((SPI_MEM_USR_MOSI_DBITLEN_V)<<(SPI_MEM_USR_MOSI_DBITLEN_S))
|
|
#define SPI_MEM_USR_MOSI_DBITLEN_V 0x7FF
|
|
#define SPI_MEM_USR_MOSI_DBITLEN_S 0
|
|
|
|
#define SPI_MEM_MISO_DLEN_REG(i) (REG_SPI_MEM_BASE(i) + 0x028)
|
|
/* SPI_MEM_USR_MISO_DBITLEN : R/W ;bitpos:[10:0] ;default: 11'h0 ; */
|
|
/*description: The length in bits of read-data. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_USR_MISO_DBITLEN 0x000007FF
|
|
#define SPI_MEM_USR_MISO_DBITLEN_M ((SPI_MEM_USR_MISO_DBITLEN_V)<<(SPI_MEM_USR_MISO_DBITLEN_S))
|
|
#define SPI_MEM_USR_MISO_DBITLEN_V 0x7FF
|
|
#define SPI_MEM_USR_MISO_DBITLEN_S 0
|
|
|
|
#define SPI_MEM_RD_STATUS_REG(i) (REG_SPI_MEM_BASE(i) + 0x02C)
|
|
/* SPI_MEM_WB_MODE : R/W ;bitpos:[23:16] ;default: 8'h00 ; */
|
|
/*description: Mode bits in the flash fast read mode it is combined with spi_mem_fastrd_mode
|
|
bit.*/
|
|
#define SPI_MEM_WB_MODE 0x000000FF
|
|
#define SPI_MEM_WB_MODE_M ((SPI_MEM_WB_MODE_V)<<(SPI_MEM_WB_MODE_S))
|
|
#define SPI_MEM_WB_MODE_V 0xFF
|
|
#define SPI_MEM_WB_MODE_S 16
|
|
/* SPI_MEM_STATUS : R/W ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: The value is stored when set spi_mem_flash_rdsr bit and spi_mem_flash_res bit.*/
|
|
#define SPI_MEM_STATUS 0x0000FFFF
|
|
#define SPI_MEM_STATUS_M ((SPI_MEM_STATUS_V)<<(SPI_MEM_STATUS_S))
|
|
#define SPI_MEM_STATUS_V 0xFFFF
|
|
#define SPI_MEM_STATUS_S 0
|
|
|
|
#define SPI_MEM_EXT_ADDR_REG(i) (REG_SPI_MEM_BASE(i) + 0x030)
|
|
/* SPI_MEM_EXT_ADDR : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The register are the higher 32bits in the 64 bits address mode.*/
|
|
#define SPI_MEM_EXT_ADDR 0xFFFFFFFF
|
|
#define SPI_MEM_EXT_ADDR_M ((SPI_MEM_EXT_ADDR_V)<<(SPI_MEM_EXT_ADDR_S))
|
|
#define SPI_MEM_EXT_ADDR_V 0xFFFFFFFF
|
|
#define SPI_MEM_EXT_ADDR_S 0
|
|
|
|
#define SPI_MEM_MISC_REG(i) (REG_SPI_MEM_BASE(i) + 0x034)
|
|
/* SPI_MEM_AUTO_PER : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: reserved*/
|
|
#define SPI_MEM_AUTO_PER (BIT(11))
|
|
#define SPI_MEM_AUTO_PER_M (BIT(11))
|
|
#define SPI_MEM_AUTO_PER_V 0x1
|
|
#define SPI_MEM_AUTO_PER_S 11
|
|
/* SPI_MEM_CS_KEEP_ACTIVE : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: spi cs line keep low when the bit is set.*/
|
|
#define SPI_MEM_CS_KEEP_ACTIVE (BIT(10))
|
|
#define SPI_MEM_CS_KEEP_ACTIVE_M (BIT(10))
|
|
#define SPI_MEM_CS_KEEP_ACTIVE_V 0x1
|
|
#define SPI_MEM_CS_KEEP_ACTIVE_S 10
|
|
/* SPI_MEM_CK_IDLE_EDGE : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: 1: spi clk line is high when idle 0: spi clk line is low when idle*/
|
|
#define SPI_MEM_CK_IDLE_EDGE (BIT(9))
|
|
#define SPI_MEM_CK_IDLE_EDGE_M (BIT(9))
|
|
#define SPI_MEM_CK_IDLE_EDGE_V 0x1
|
|
#define SPI_MEM_CK_IDLE_EDGE_S 9
|
|
/* SPI_MEM_SSUB_PIN : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram is connected to SUBPINs.*/
|
|
#define SPI_MEM_SSUB_PIN (BIT(8))
|
|
#define SPI_MEM_SSUB_PIN_M (BIT(8))
|
|
#define SPI_MEM_SSUB_PIN_V 0x1
|
|
#define SPI_MEM_SSUB_PIN_S 8
|
|
/* SPI_MEM_FSUB_PIN : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: For SPI0 flash is connected to SUBPINs.*/
|
|
#define SPI_MEM_FSUB_PIN (BIT(7))
|
|
#define SPI_MEM_FSUB_PIN_M (BIT(7))
|
|
#define SPI_MEM_FSUB_PIN_V 0x1
|
|
#define SPI_MEM_FSUB_PIN_S 7
|
|
/* SPI_MEM_CS_POL : R/W ;bitpos:[6:5] ;default: 2'b0 ; */
|
|
/*description: In the master mode the bits are the polarity of spi cs line
|
|
the value is equivalent to spi_mem_cs ^ spi_mem_master_cs_pol.*/
|
|
#define SPI_MEM_CS_POL 0x00000003
|
|
#define SPI_MEM_CS_POL_M ((SPI_MEM_CS_POL_V)<<(SPI_MEM_CS_POL_S))
|
|
#define SPI_MEM_CS_POL_V 0x3
|
|
#define SPI_MEM_CS_POL_S 5
|
|
/* SPI_MEM_TRANS_END_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The bit is used to enable the intterrupt of SPI transmitting done.*/
|
|
#define SPI_MEM_TRANS_END_INT_ENA (BIT(4))
|
|
#define SPI_MEM_TRANS_END_INT_ENA_M (BIT(4))
|
|
#define SPI_MEM_TRANS_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_TRANS_END_INT_ENA_S 4
|
|
/* SPI_MEM_TRANS_END : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The bit is used to indicate the transimitting is done.*/
|
|
#define SPI_MEM_TRANS_END (BIT(3))
|
|
#define SPI_MEM_TRANS_END_M (BIT(3))
|
|
#define SPI_MEM_TRANS_END_V 0x1
|
|
#define SPI_MEM_TRANS_END_S 3
|
|
/* SPI_MEM_CS1_DIS : R/W ;bitpos:[1] ;default: 1'b1 ; */
|
|
/*description: SPI CS1 pin enable 1: disable CS1 0: spi_mem_cs1 signal is from/to CS1 pin*/
|
|
#define SPI_MEM_CS1_DIS (BIT(1))
|
|
#define SPI_MEM_CS1_DIS_M (BIT(1))
|
|
#define SPI_MEM_CS1_DIS_V 0x1
|
|
#define SPI_MEM_CS1_DIS_S 1
|
|
/* SPI_MEM_CS0_DIS : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: SPI CS0 pin enable 1: disable CS0 0: spi_mem_cs0 signal is from/to CS0 pin*/
|
|
#define SPI_MEM_CS0_DIS (BIT(0))
|
|
#define SPI_MEM_CS0_DIS_M (BIT(0))
|
|
#define SPI_MEM_CS0_DIS_V 0x1
|
|
#define SPI_MEM_CS0_DIS_S 0
|
|
|
|
#define SPI_MEM_TX_CRC_REG(i) (REG_SPI_MEM_BASE(i) + 0x038)
|
|
/* SPI_MEM_TX_CRC_DATA : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: For SPI1 the value of crc32.*/
|
|
#define SPI_MEM_TX_CRC_DATA 0xFFFFFFFF
|
|
#define SPI_MEM_TX_CRC_DATA_M ((SPI_MEM_TX_CRC_DATA_V)<<(SPI_MEM_TX_CRC_DATA_S))
|
|
#define SPI_MEM_TX_CRC_DATA_V 0xFFFFFFFF
|
|
#define SPI_MEM_TX_CRC_DATA_S 0
|
|
|
|
#define SPI_MEM_CACHE_FCTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x03C)
|
|
/* SPI_MEM_FADDR_QUAD : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: For SPI0 flash address phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_qio.*/
|
|
#define SPI_MEM_FADDR_QUAD (BIT(8))
|
|
#define SPI_MEM_FADDR_QUAD_M (BIT(8))
|
|
#define SPI_MEM_FADDR_QUAD_V 0x1
|
|
#define SPI_MEM_FADDR_QUAD_S 8
|
|
/* SPI_MEM_FDOUT_QUAD : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: For SPI0 flash dout phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_qio.*/
|
|
#define SPI_MEM_FDOUT_QUAD (BIT(7))
|
|
#define SPI_MEM_FDOUT_QUAD_M (BIT(7))
|
|
#define SPI_MEM_FDOUT_QUAD_V 0x1
|
|
#define SPI_MEM_FDOUT_QUAD_S 7
|
|
/* SPI_MEM_FDIN_QUAD : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: For SPI0 flash din phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_qio.*/
|
|
#define SPI_MEM_FDIN_QUAD (BIT(6))
|
|
#define SPI_MEM_FDIN_QUAD_M (BIT(6))
|
|
#define SPI_MEM_FDIN_QUAD_V 0x1
|
|
#define SPI_MEM_FDIN_QUAD_S 6
|
|
/* SPI_MEM_FADDR_DUAL : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: For SPI0 flash address phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_dio.*/
|
|
#define SPI_MEM_FADDR_DUAL (BIT(5))
|
|
#define SPI_MEM_FADDR_DUAL_M (BIT(5))
|
|
#define SPI_MEM_FADDR_DUAL_V 0x1
|
|
#define SPI_MEM_FADDR_DUAL_S 5
|
|
/* SPI_MEM_FDOUT_DUAL : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: For SPI0 flash dout phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_dio.*/
|
|
#define SPI_MEM_FDOUT_DUAL (BIT(4))
|
|
#define SPI_MEM_FDOUT_DUAL_M (BIT(4))
|
|
#define SPI_MEM_FDOUT_DUAL_V 0x1
|
|
#define SPI_MEM_FDOUT_DUAL_S 4
|
|
/* SPI_MEM_FDIN_DUAL : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: For SPI0 flash din phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_dio.*/
|
|
#define SPI_MEM_FDIN_DUAL (BIT(3))
|
|
#define SPI_MEM_FDIN_DUAL_M (BIT(3))
|
|
#define SPI_MEM_FDIN_DUAL_V 0x1
|
|
#define SPI_MEM_FDIN_DUAL_S 3
|
|
/* SPI_MEM_CACHE_FLASH_USR_CMD : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: For SPI0 cache read flash for user define command 1: enable 0:disable.*/
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD (BIT(2))
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD_M (BIT(2))
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD_V 0x1
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD_S 2
|
|
/* SPI_MEM_CACHE_USR_CMD_4BYTE : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: For SPI0 cache read flash with 4 bytes command 1: enable 0:disable.*/
|
|
#define SPI_MEM_CACHE_USR_CMD_4BYTE (BIT(1))
|
|
#define SPI_MEM_CACHE_USR_CMD_4BYTE_M (BIT(1))
|
|
#define SPI_MEM_CACHE_USR_CMD_4BYTE_V 0x1
|
|
#define SPI_MEM_CACHE_USR_CMD_4BYTE_S 1
|
|
/* SPI_MEM_CACHE_REQ_EN : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: For SPI0 Cache access enable 1: enable 0:disable.*/
|
|
#define SPI_MEM_CACHE_REQ_EN (BIT(0))
|
|
#define SPI_MEM_CACHE_REQ_EN_M (BIT(0))
|
|
#define SPI_MEM_CACHE_REQ_EN_V 0x1
|
|
#define SPI_MEM_CACHE_REQ_EN_S 0
|
|
|
|
#define SPI_MEM_CACHE_SCTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x040)
|
|
/* SPI_MEM_SRAM_WDUMMY_CYCLELEN : R/W ;bitpos:[29:22] ;default: 8'b1 ; */
|
|
/*description: For SPI0 In the sram mode it is the length in bits of write
|
|
dummy phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_SRAM_WDUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_MEM_SRAM_WDUMMY_CYCLELEN_M ((SPI_MEM_SRAM_WDUMMY_CYCLELEN_V)<<(SPI_MEM_SRAM_WDUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_SRAM_WDUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_MEM_SRAM_WDUMMY_CYCLELEN_S 22
|
|
/* SPI_MEM_CACHE_SRAM_USR_WCMD : R/W ;bitpos:[20] ;default: 1'b1 ; */
|
|
/*description: For SPI0 In the spi sram mode cache write sram for user define command*/
|
|
#define SPI_MEM_CACHE_SRAM_USR_WCMD (BIT(20))
|
|
#define SPI_MEM_CACHE_SRAM_USR_WCMD_M (BIT(20))
|
|
#define SPI_MEM_CACHE_SRAM_USR_WCMD_V 0x1
|
|
#define SPI_MEM_CACHE_SRAM_USR_WCMD_S 20
|
|
/* SPI_MEM_SRAM_ADDR_BITLEN : R/W ;bitpos:[19:14] ;default: 6'd23 ; */
|
|
/*description: For SPI0 In the sram mode it is the length in bits of address
|
|
phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_SRAM_ADDR_BITLEN 0x0000003F
|
|
#define SPI_MEM_SRAM_ADDR_BITLEN_M ((SPI_MEM_SRAM_ADDR_BITLEN_V)<<(SPI_MEM_SRAM_ADDR_BITLEN_S))
|
|
#define SPI_MEM_SRAM_ADDR_BITLEN_V 0x3F
|
|
#define SPI_MEM_SRAM_ADDR_BITLEN_S 14
|
|
/* SPI_MEM_SRAM_RDUMMY_CYCLELEN : R/W ;bitpos:[13:6] ;default: 8'b1 ; */
|
|
/*description: For SPI0 In the sram mode it is the length in bits of read
|
|
dummy phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_SRAM_RDUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_MEM_SRAM_RDUMMY_CYCLELEN_M ((SPI_MEM_SRAM_RDUMMY_CYCLELEN_V)<<(SPI_MEM_SRAM_RDUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_SRAM_RDUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_MEM_SRAM_RDUMMY_CYCLELEN_S 6
|
|
/* SPI_MEM_CACHE_SRAM_USR_RCMD : R/W ;bitpos:[5] ;default: 1'b1 ; */
|
|
/*description: For SPI0 In the spi sram mode cache read sram for user define command.*/
|
|
#define SPI_MEM_CACHE_SRAM_USR_RCMD (BIT(5))
|
|
#define SPI_MEM_CACHE_SRAM_USR_RCMD_M (BIT(5))
|
|
#define SPI_MEM_CACHE_SRAM_USR_RCMD_V 0x1
|
|
#define SPI_MEM_CACHE_SRAM_USR_RCMD_S 5
|
|
/* SPI_MEM_USR_RD_SRAM_DUMMY : R/W ;bitpos:[4] ;default: 1'b1 ; */
|
|
/*description: For SPI0 In the spi sram mode it is the enable bit of dummy
|
|
phase for read operations.*/
|
|
#define SPI_MEM_USR_RD_SRAM_DUMMY (BIT(4))
|
|
#define SPI_MEM_USR_RD_SRAM_DUMMY_M (BIT(4))
|
|
#define SPI_MEM_USR_RD_SRAM_DUMMY_V 0x1
|
|
#define SPI_MEM_USR_RD_SRAM_DUMMY_S 4
|
|
/* SPI_MEM_USR_WR_SRAM_DUMMY : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: For SPI0 In the spi sram mode it is the enable bit of dummy
|
|
phase for write operations.*/
|
|
#define SPI_MEM_USR_WR_SRAM_DUMMY (BIT(3))
|
|
#define SPI_MEM_USR_WR_SRAM_DUMMY_M (BIT(3))
|
|
#define SPI_MEM_USR_WR_SRAM_DUMMY_V 0x1
|
|
#define SPI_MEM_USR_WR_SRAM_DUMMY_S 3
|
|
/* SPI_MEM_USR_SRAM_QIO : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: For SPI0 In the spi sram mode spi quad I/O mode enable 1: enable 0:disable*/
|
|
#define SPI_MEM_USR_SRAM_QIO (BIT(2))
|
|
#define SPI_MEM_USR_SRAM_QIO_M (BIT(2))
|
|
#define SPI_MEM_USR_SRAM_QIO_V 0x1
|
|
#define SPI_MEM_USR_SRAM_QIO_S 2
|
|
/* SPI_MEM_USR_SRAM_DIO : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: For SPI0 In the spi sram mode spi dual I/O mode enable 1: enable 0:disable*/
|
|
#define SPI_MEM_USR_SRAM_DIO (BIT(1))
|
|
#define SPI_MEM_USR_SRAM_DIO_M (BIT(1))
|
|
#define SPI_MEM_USR_SRAM_DIO_V 0x1
|
|
#define SPI_MEM_USR_SRAM_DIO_S 1
|
|
/* SPI_MEM_CACHE_USR_SCMD_4BYTE : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: For SPI0 In the spi sram mode cache read flash with 4 bytes
|
|
command 1: enable 0:disable.*/
|
|
#define SPI_MEM_CACHE_USR_SCMD_4BYTE (BIT(0))
|
|
#define SPI_MEM_CACHE_USR_SCMD_4BYTE_M (BIT(0))
|
|
#define SPI_MEM_CACHE_USR_SCMD_4BYTE_V 0x1
|
|
#define SPI_MEM_CACHE_USR_SCMD_4BYTE_S 0
|
|
|
|
#define SPI_MEM_SRAM_CMD_REG(i) (REG_SPI_MEM_BASE(i) + 0x044)
|
|
/* SPI_MEM_SCMD_QUAD : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram cmd phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_qio.*/
|
|
#define SPI_MEM_SCMD_QUAD (BIT(17))
|
|
#define SPI_MEM_SCMD_QUAD_M (BIT(17))
|
|
#define SPI_MEM_SCMD_QUAD_V 0x1
|
|
#define SPI_MEM_SCMD_QUAD_S 17
|
|
/* SPI_MEM_SADDR_QUAD : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram address phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_qio.*/
|
|
#define SPI_MEM_SADDR_QUAD (BIT(16))
|
|
#define SPI_MEM_SADDR_QUAD_M (BIT(16))
|
|
#define SPI_MEM_SADDR_QUAD_V 0x1
|
|
#define SPI_MEM_SADDR_QUAD_S 16
|
|
/* SPI_MEM_SDOUT_QUAD : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram dout phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_qio.*/
|
|
#define SPI_MEM_SDOUT_QUAD (BIT(15))
|
|
#define SPI_MEM_SDOUT_QUAD_M (BIT(15))
|
|
#define SPI_MEM_SDOUT_QUAD_V 0x1
|
|
#define SPI_MEM_SDOUT_QUAD_S 15
|
|
/* SPI_MEM_SDIN_QUAD : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram din phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_qio.*/
|
|
#define SPI_MEM_SDIN_QUAD (BIT(14))
|
|
#define SPI_MEM_SDIN_QUAD_M (BIT(14))
|
|
#define SPI_MEM_SDIN_QUAD_V 0x1
|
|
#define SPI_MEM_SDIN_QUAD_S 14
|
|
/* SPI_MEM_SCMD_DUAL : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram cmd phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_dio.*/
|
|
#define SPI_MEM_SCMD_DUAL (BIT(13))
|
|
#define SPI_MEM_SCMD_DUAL_M (BIT(13))
|
|
#define SPI_MEM_SCMD_DUAL_V 0x1
|
|
#define SPI_MEM_SCMD_DUAL_S 13
|
|
/* SPI_MEM_SADDR_DUAL : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram address phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_dio.*/
|
|
#define SPI_MEM_SADDR_DUAL (BIT(12))
|
|
#define SPI_MEM_SADDR_DUAL_M (BIT(12))
|
|
#define SPI_MEM_SADDR_DUAL_V 0x1
|
|
#define SPI_MEM_SADDR_DUAL_S 12
|
|
/* SPI_MEM_SDOUT_DUAL : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram dout phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_dio.*/
|
|
#define SPI_MEM_SDOUT_DUAL (BIT(11))
|
|
#define SPI_MEM_SDOUT_DUAL_M (BIT(11))
|
|
#define SPI_MEM_SDOUT_DUAL_V 0x1
|
|
#define SPI_MEM_SDOUT_DUAL_S 11
|
|
/* SPI_MEM_SDIN_DUAL : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram din phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_usr_sram_dio.*/
|
|
#define SPI_MEM_SDIN_DUAL (BIT(10))
|
|
#define SPI_MEM_SDIN_DUAL_M (BIT(10))
|
|
#define SPI_MEM_SDIN_DUAL_V 0x1
|
|
#define SPI_MEM_SDIN_DUAL_S 10
|
|
/* SPI_MEM_SWB_MODE : R/W ;bitpos:[9:2] ;default: 8'b0 ; */
|
|
/*description: Mode bits in the psram fast read mode it is combined with spi_mem_fastrd_mode
|
|
bit.*/
|
|
#define SPI_MEM_SWB_MODE 0x000000FF
|
|
#define SPI_MEM_SWB_MODE_M ((SPI_MEM_SWB_MODE_V)<<(SPI_MEM_SWB_MODE_S))
|
|
#define SPI_MEM_SWB_MODE_V 0xFF
|
|
#define SPI_MEM_SWB_MODE_S 2
|
|
/* SPI_MEM_SCLK_MODE : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
|
|
/*description: SPI clock mode bits. 0: SPI clock is off when CS inactive 1:
|
|
SPI clock is delayed one cycle after CS inactive 2: SPI clock is delayed two cycles after CS inactive 3: SPI clock is alwasy on.*/
|
|
#define SPI_MEM_SCLK_MODE 0x00000003
|
|
#define SPI_MEM_SCLK_MODE_M ((SPI_MEM_SCLK_MODE_V)<<(SPI_MEM_SCLK_MODE_S))
|
|
#define SPI_MEM_SCLK_MODE_V 0x3
|
|
#define SPI_MEM_SCLK_MODE_S 0
|
|
|
|
#define SPI_MEM_SRAM_DRD_CMD_REG(i) (REG_SPI_MEM_BASE(i) + 0x048)
|
|
/* SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN : R/W ;bitpos:[31:28] ;default: 4'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the length in bits of
|
|
command phase for sram. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN 0x0000000F
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN_M ((SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN_V)<<(SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN_S))
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN_V 0xF
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_BITLEN_S 28
|
|
/* SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the read command value
|
|
of command phase for sram.*/
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE 0x0000FFFF
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE_M ((SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE_V)<<(SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE_S))
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE_V 0xFFFF
|
|
#define SPI_MEM_CACHE_SRAM_USR_RD_CMD_VALUE_S 0
|
|
|
|
#define SPI_MEM_SRAM_DWR_CMD_REG(i) (REG_SPI_MEM_BASE(i) + 0x04C)
|
|
/* SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN : R/W ;bitpos:[31:28] ;default: 4'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the in bits of command
|
|
phase for sram. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN 0x0000000F
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN_M ((SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN_V)<<(SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN_S))
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN_V 0xF
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_BITLEN_S 28
|
|
/* SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the write command value
|
|
of command phase for sram.*/
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE 0x0000FFFF
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE_M ((SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE_V)<<(SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE_S))
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE_V 0xFFFF
|
|
#define SPI_MEM_CACHE_SRAM_USR_WR_CMD_VALUE_S 0
|
|
|
|
#define SPI_MEM_SRAM_CLK_REG(i) (REG_SPI_MEM_BASE(i) + 0x050)
|
|
/* SPI_MEM_SCLK_EQU_SYSCLK : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: For SPI0 sram interface 1: spi_mem_clk is eqaul to system 0:
|
|
spi_mem_clk is divided from system clock.*/
|
|
#define SPI_MEM_SCLK_EQU_SYSCLK (BIT(31))
|
|
#define SPI_MEM_SCLK_EQU_SYSCLK_M (BIT(31))
|
|
#define SPI_MEM_SCLK_EQU_SYSCLK_V 0x1
|
|
#define SPI_MEM_SCLK_EQU_SYSCLK_S 31
|
|
/* SPI_MEM_SCLKCNT_N : R/W ;bitpos:[23:16] ;default: 8'h3 ; */
|
|
/*description: For SPI0 sram interface it is the divider of spi_mem_clk. So
|
|
spi_mem_clk frequency is system/(spi_mem_clkcnt_N+1)*/
|
|
#define SPI_MEM_SCLKCNT_N 0x000000FF
|
|
#define SPI_MEM_SCLKCNT_N_M ((SPI_MEM_SCLKCNT_N_V)<<(SPI_MEM_SCLKCNT_N_S))
|
|
#define SPI_MEM_SCLKCNT_N_V 0xFF
|
|
#define SPI_MEM_SCLKCNT_N_S 16
|
|
/* SPI_MEM_SCLKCNT_H : R/W ;bitpos:[15:8] ;default: 8'h1 ; */
|
|
/*description: For SPI0 sram interface it must be floor((spi_mem_clkcnt_N+1)/2-1).*/
|
|
#define SPI_MEM_SCLKCNT_H 0x000000FF
|
|
#define SPI_MEM_SCLKCNT_H_M ((SPI_MEM_SCLKCNT_H_V)<<(SPI_MEM_SCLKCNT_H_S))
|
|
#define SPI_MEM_SCLKCNT_H_V 0xFF
|
|
#define SPI_MEM_SCLKCNT_H_S 8
|
|
/* SPI_MEM_SCLKCNT_L : R/W ;bitpos:[7:0] ;default: 8'h3 ; */
|
|
/*description: For SPI0 sram interface it must be equal to spi_mem_clkcnt_N.*/
|
|
#define SPI_MEM_SCLKCNT_L 0x000000FF
|
|
#define SPI_MEM_SCLKCNT_L_M ((SPI_MEM_SCLKCNT_L_V)<<(SPI_MEM_SCLKCNT_L_S))
|
|
#define SPI_MEM_SCLKCNT_L_V 0xFF
|
|
#define SPI_MEM_SCLKCNT_L_S 0
|
|
|
|
#define SPI_MEM_FSM_REG(i) (REG_SPI_MEM_BASE(i) + 0x054)
|
|
/* SPI_MEM_ST : RO ;bitpos:[2:0] ;default: 3'b0 ; */
|
|
/*description: The status of spi state machine. 0: idle state 1: preparation
|
|
state 2: send command state 3: send data state 4: red data state 5:write data state 6: wait state 7: done state.*/
|
|
#define SPI_MEM_ST 0x00000007
|
|
#define SPI_MEM_ST_M ((SPI_MEM_ST_V)<<(SPI_MEM_ST_S))
|
|
#define SPI_MEM_ST_V 0x7
|
|
#define SPI_MEM_ST_S 0
|
|
|
|
#define SPI_MEM_HOLD_REG(i) (REG_SPI_MEM_BASE(i) + 0x058)
|
|
/* SPI_MEM_HOLD_ENA : R/W ;bitpos:[1:0] ;default: 2'd3 ; */
|
|
/*description: This register is for two SPI masters to share the same cs clock
|
|
and data signals. The bits of one SPI are set if the other SPI is busy the SPI will be hold. 1(3): hold at idle phase 2: hold at prepare phase.*/
|
|
#define SPI_MEM_HOLD_ENA 0x00000003
|
|
#define SPI_MEM_HOLD_ENA_M ((SPI_MEM_HOLD_ENA_V)<<(SPI_MEM_HOLD_ENA_S))
|
|
#define SPI_MEM_HOLD_ENA_V 0x3
|
|
#define SPI_MEM_HOLD_ENA_S 0
|
|
|
|
#define SPI_MEM_DMA_CONF_REG(i) (REG_SPI_MEM_BASE(i) + 0x05C)
|
|
/* SPI_MEM_DMA_CONTINUE : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: spi dma continue tx/rx data.*/
|
|
#define SPI_MEM_DMA_CONTINUE (BIT(16))
|
|
#define SPI_MEM_DMA_CONTINUE_M (BIT(16))
|
|
#define SPI_MEM_DMA_CONTINUE_V 0x1
|
|
#define SPI_MEM_DMA_CONTINUE_S 16
|
|
/* SPI_MEM_DMA_TX_STOP : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: spi dma write data stop when in continue tx/rx mode.*/
|
|
#define SPI_MEM_DMA_TX_STOP (BIT(15))
|
|
#define SPI_MEM_DMA_TX_STOP_M (BIT(15))
|
|
#define SPI_MEM_DMA_TX_STOP_V 0x1
|
|
#define SPI_MEM_DMA_TX_STOP_S 15
|
|
/* SPI_MEM_DMA_RX_STOP : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: spi dma read data stop when in continue tx/rx mode.*/
|
|
#define SPI_MEM_DMA_RX_STOP (BIT(14))
|
|
#define SPI_MEM_DMA_RX_STOP_M (BIT(14))
|
|
#define SPI_MEM_DMA_RX_STOP_V 0x1
|
|
#define SPI_MEM_DMA_RX_STOP_S 14
|
|
/* SPI_MEM_DMA_MEM_TRANS_ENA : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
/*description: reserved*/
|
|
#define SPI_MEM_DMA_MEM_TRANS_ENA (BIT(13))
|
|
#define SPI_MEM_DMA_MEM_TRANS_ENA_M (BIT(13))
|
|
#define SPI_MEM_DMA_MEM_TRANS_ENA_V 0x1
|
|
#define SPI_MEM_DMA_MEM_TRANS_ENA_S 13
|
|
/* SPI_MEM_OUT_DATA_BURST_EN : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: spi dma read data from memory in burst mode.*/
|
|
#define SPI_MEM_OUT_DATA_BURST_EN (BIT(12))
|
|
#define SPI_MEM_OUT_DATA_BURST_EN_M (BIT(12))
|
|
#define SPI_MEM_OUT_DATA_BURST_EN_V 0x1
|
|
#define SPI_MEM_OUT_DATA_BURST_EN_S 12
|
|
/* SPI_MEM_INDSCR_BURST_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: read descriptor use burst mode when write data to memory.*/
|
|
#define SPI_MEM_INDSCR_BURST_EN (BIT(11))
|
|
#define SPI_MEM_INDSCR_BURST_EN_M (BIT(11))
|
|
#define SPI_MEM_INDSCR_BURST_EN_V 0x1
|
|
#define SPI_MEM_INDSCR_BURST_EN_S 11
|
|
/* SPI_MEM_OUTDSCR_BURST_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: read descriptor use burst mode when read data for memory.*/
|
|
#define SPI_MEM_OUTDSCR_BURST_EN (BIT(10))
|
|
#define SPI_MEM_OUTDSCR_BURST_EN_M (BIT(10))
|
|
#define SPI_MEM_OUTDSCR_BURST_EN_V 0x1
|
|
#define SPI_MEM_OUTDSCR_BURST_EN_S 10
|
|
/* SPI_MEM_OUT_EOF_MODE : R/W ;bitpos:[9] ;default: 1'b1 ; */
|
|
/*description: out eof flag generation mode . 1: when dma pop all data from
|
|
fifo 0:when ahb push all data to fifo.*/
|
|
#define SPI_MEM_OUT_EOF_MODE (BIT(9))
|
|
#define SPI_MEM_OUT_EOF_MODE_M (BIT(9))
|
|
#define SPI_MEM_OUT_EOF_MODE_V 0x1
|
|
#define SPI_MEM_OUT_EOF_MODE_S 9
|
|
/* SPI_MEM_OUT_AUTO_WRBACK : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: when the bit is set DMA continue to use the next inlink node
|
|
when the length of inlink is 0.*/
|
|
#define SPI_MEM_OUT_AUTO_WRBACK (BIT(8))
|
|
#define SPI_MEM_OUT_AUTO_WRBACK_M (BIT(8))
|
|
#define SPI_MEM_OUT_AUTO_WRBACK_V 0x1
|
|
#define SPI_MEM_OUT_AUTO_WRBACK_S 8
|
|
/* SPI_MEM_OUT_LOOP_TEST : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: Set bit to test out link.*/
|
|
#define SPI_MEM_OUT_LOOP_TEST (BIT(7))
|
|
#define SPI_MEM_OUT_LOOP_TEST_M (BIT(7))
|
|
#define SPI_MEM_OUT_LOOP_TEST_V 0x1
|
|
#define SPI_MEM_OUT_LOOP_TEST_S 7
|
|
/* SPI_MEM_IN_LOOP_TEST : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: Set bit to test in link.*/
|
|
#define SPI_MEM_IN_LOOP_TEST (BIT(6))
|
|
#define SPI_MEM_IN_LOOP_TEST_M (BIT(6))
|
|
#define SPI_MEM_IN_LOOP_TEST_V 0x1
|
|
#define SPI_MEM_IN_LOOP_TEST_S 6
|
|
/* SPI_MEM_AHBM_RST : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: Reset spi dma ahb master.*/
|
|
#define SPI_MEM_AHBM_RST (BIT(5))
|
|
#define SPI_MEM_AHBM_RST_M (BIT(5))
|
|
#define SPI_MEM_AHBM_RST_V 0x1
|
|
#define SPI_MEM_AHBM_RST_S 5
|
|
/* SPI_MEM_AHBM_FIFO_RST : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: Reset spi dma ahb master fifo pointer.*/
|
|
#define SPI_MEM_AHBM_FIFO_RST (BIT(4))
|
|
#define SPI_MEM_AHBM_FIFO_RST_M (BIT(4))
|
|
#define SPI_MEM_AHBM_FIFO_RST_V 0x1
|
|
#define SPI_MEM_AHBM_FIFO_RST_S 4
|
|
/* SPI_MEM_OUT_RST : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The bit is used to reset out dma fsm and out data fifo pointer.*/
|
|
#define SPI_MEM_OUT_RST (BIT(3))
|
|
#define SPI_MEM_OUT_RST_M (BIT(3))
|
|
#define SPI_MEM_OUT_RST_V 0x1
|
|
#define SPI_MEM_OUT_RST_S 3
|
|
/* SPI_MEM_IN_RST : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The bit is used to reset in dma fsm and in data fifo pointer.*/
|
|
#define SPI_MEM_IN_RST (BIT(2))
|
|
#define SPI_MEM_IN_RST_M (BIT(2))
|
|
#define SPI_MEM_IN_RST_V 0x1
|
|
#define SPI_MEM_IN_RST_S 2
|
|
/* SPI_MEM_DMA_TX_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: spi dma tx data enable.*/
|
|
#define SPI_MEM_DMA_TX_ENA (BIT(1))
|
|
#define SPI_MEM_DMA_TX_ENA_M (BIT(1))
|
|
#define SPI_MEM_DMA_TX_ENA_V 0x1
|
|
#define SPI_MEM_DMA_TX_ENA_S 1
|
|
/* SPI_MEM_DMA_RX_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: spi dma rx data enable.*/
|
|
#define SPI_MEM_DMA_RX_ENA (BIT(0))
|
|
#define SPI_MEM_DMA_RX_ENA_M (BIT(0))
|
|
#define SPI_MEM_DMA_RX_ENA_V 0x1
|
|
#define SPI_MEM_DMA_RX_ENA_S 0
|
|
|
|
#define SPI_MEM_DMA_OUT_LINK_REG(i) (REG_SPI_MEM_BASE(i) + 0x060)
|
|
/* SPI_MEM_OUTLINK_RESTART : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: Set the bit to mount on new outlink descriptors.*/
|
|
#define SPI_MEM_OUTLINK_RESTART (BIT(30))
|
|
#define SPI_MEM_OUTLINK_RESTART_M (BIT(30))
|
|
#define SPI_MEM_OUTLINK_RESTART_V 0x1
|
|
#define SPI_MEM_OUTLINK_RESTART_S 30
|
|
/* SPI_MEM_OUTLINK_START : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Set the bit to start to use outlink descriptor.*/
|
|
#define SPI_MEM_OUTLINK_START (BIT(29))
|
|
#define SPI_MEM_OUTLINK_START_M (BIT(29))
|
|
#define SPI_MEM_OUTLINK_START_V 0x1
|
|
#define SPI_MEM_OUTLINK_START_S 29
|
|
/* SPI_MEM_OUTLINK_STOP : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: Set the bit to stop to use outlink descriptor.*/
|
|
#define SPI_MEM_OUTLINK_STOP (BIT(28))
|
|
#define SPI_MEM_OUTLINK_STOP_M (BIT(28))
|
|
#define SPI_MEM_OUTLINK_STOP_V 0x1
|
|
#define SPI_MEM_OUTLINK_STOP_S 28
|
|
/* SPI_MEM_OUTLINK_ADDR : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
|
|
/*description: The address of the first outlink descriptor.*/
|
|
#define SPI_MEM_OUTLINK_ADDR 0x000FFFFF
|
|
#define SPI_MEM_OUTLINK_ADDR_M ((SPI_MEM_OUTLINK_ADDR_V)<<(SPI_MEM_OUTLINK_ADDR_S))
|
|
#define SPI_MEM_OUTLINK_ADDR_V 0xFFFFF
|
|
#define SPI_MEM_OUTLINK_ADDR_S 0
|
|
|
|
#define SPI_MEM_DMA_IN_LINK_REG(i) (REG_SPI_MEM_BASE(i) + 0x064)
|
|
/* SPI_MEM_INLINK_RESTART : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: Set the bit to mount on new inlink descriptors.*/
|
|
#define SPI_MEM_INLINK_RESTART (BIT(30))
|
|
#define SPI_MEM_INLINK_RESTART_M (BIT(30))
|
|
#define SPI_MEM_INLINK_RESTART_V 0x1
|
|
#define SPI_MEM_INLINK_RESTART_S 30
|
|
/* SPI_MEM_INLINK_START : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Set the bit to start to use inlink descriptor.*/
|
|
#define SPI_MEM_INLINK_START (BIT(29))
|
|
#define SPI_MEM_INLINK_START_M (BIT(29))
|
|
#define SPI_MEM_INLINK_START_V 0x1
|
|
#define SPI_MEM_INLINK_START_S 29
|
|
/* SPI_MEM_INLINK_STOP : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: Set the bit to stop to use inlink descriptor.*/
|
|
#define SPI_MEM_INLINK_STOP (BIT(28))
|
|
#define SPI_MEM_INLINK_STOP_M (BIT(28))
|
|
#define SPI_MEM_INLINK_STOP_V 0x1
|
|
#define SPI_MEM_INLINK_STOP_S 28
|
|
/* SPI_MEM_INLINK_AUTO_RET : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: when the bit is set the inlink descriptor returns to the first
|
|
link node when a packet is error.*/
|
|
#define SPI_MEM_INLINK_AUTO_RET (BIT(20))
|
|
#define SPI_MEM_INLINK_AUTO_RET_M (BIT(20))
|
|
#define SPI_MEM_INLINK_AUTO_RET_V 0x1
|
|
#define SPI_MEM_INLINK_AUTO_RET_S 20
|
|
/* SPI_MEM_INLINK_ADDR : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
|
|
/*description: The address of the first inlink descriptor.*/
|
|
#define SPI_MEM_INLINK_ADDR 0x000FFFFF
|
|
#define SPI_MEM_INLINK_ADDR_M ((SPI_MEM_INLINK_ADDR_V)<<(SPI_MEM_INLINK_ADDR_S))
|
|
#define SPI_MEM_INLINK_ADDR_V 0xFFFFF
|
|
#define SPI_MEM_INLINK_ADDR_S 0
|
|
|
|
#define SPI_MEM_DMA_INT_ENA_REG(i) (REG_SPI_MEM_BASE(i) + 0x068)
|
|
/* SPI_MEM_OUT_TOTAL_EOF_INT_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The enable bit for sending all the packets to host done.*/
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ENA (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ENA_M (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ENA_V 0x1
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ENA_S 8
|
|
/* SPI_MEM_OUT_EOF_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The enable bit for sending a packet to host done.*/
|
|
#define SPI_MEM_OUT_EOF_INT_ENA (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_ENA_M (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_ENA_V 0x1
|
|
#define SPI_MEM_OUT_EOF_INT_ENA_S 7
|
|
/* SPI_MEM_OUT_DONE_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The enable bit for completing usage of a outlink descriptor .*/
|
|
#define SPI_MEM_OUT_DONE_INT_ENA (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_ENA_M (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_ENA_V 0x1
|
|
#define SPI_MEM_OUT_DONE_INT_ENA_S 6
|
|
/* SPI_MEM_IN_SUC_EOF_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The enable bit for completing receiving all the packets from host.*/
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ENA (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ENA_M (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ENA_V 0x1
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ENA_S 5
|
|
/* SPI_MEM_IN_ERR_EOF_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The enable bit for receiving error.*/
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ENA (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ENA_M (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ENA_V 0x1
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ENA_S 4
|
|
/* SPI_MEM_IN_DONE_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The enable bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_MEM_IN_DONE_INT_ENA (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_ENA_M (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_ENA_V 0x1
|
|
#define SPI_MEM_IN_DONE_INT_ENA_S 3
|
|
/* SPI_MEM_INLINK_DSCR_ERROR_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The enable bit for inlink descriptor error.*/
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ENA (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ENA_M (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ENA_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ENA_S 2
|
|
/* SPI_MEM_OUTLINK_DSCR_ERROR_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The enable bit for outlink descriptor error.*/
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ENA (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ENA_M (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ENA_V 0x1
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ENA_S 1
|
|
/* SPI_MEM_INLINK_DSCR_EMPTY_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The enable bit for lack of enough inlink descriptors.*/
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ENA (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ENA_M (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ENA_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ENA_S 0
|
|
|
|
#define SPI_MEM_DMA_INT_RAW_REG(i) (REG_SPI_MEM_BASE(i) + 0x06C)
|
|
/* SPI_MEM_OUT_TOTAL_EOF_INT_RAW : RO ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The raw bit for sending all the packets to host done.*/
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_RAW (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_RAW_M (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_RAW_V 0x1
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_RAW_S 8
|
|
/* SPI_MEM_OUT_EOF_INT_RAW : RO ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The raw bit for sending a packet to host done.*/
|
|
#define SPI_MEM_OUT_EOF_INT_RAW (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_RAW_M (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_RAW_V 0x1
|
|
#define SPI_MEM_OUT_EOF_INT_RAW_S 7
|
|
/* SPI_MEM_OUT_DONE_INT_RAW : RO ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The raw bit for completing usage of a outlink descriptor.*/
|
|
#define SPI_MEM_OUT_DONE_INT_RAW (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_RAW_M (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_RAW_V 0x1
|
|
#define SPI_MEM_OUT_DONE_INT_RAW_S 6
|
|
/* SPI_MEM_IN_SUC_EOF_INT_RAW : RO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The raw bit for completing receiving all the packets from host.*/
|
|
#define SPI_MEM_IN_SUC_EOF_INT_RAW (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_RAW_M (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_RAW_V 0x1
|
|
#define SPI_MEM_IN_SUC_EOF_INT_RAW_S 5
|
|
/* SPI_MEM_IN_ERR_EOF_INT_RAW : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The raw bit for receiving error.*/
|
|
#define SPI_MEM_IN_ERR_EOF_INT_RAW (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_RAW_M (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_RAW_V 0x1
|
|
#define SPI_MEM_IN_ERR_EOF_INT_RAW_S 4
|
|
/* SPI_MEM_IN_DONE_INT_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The raw bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_MEM_IN_DONE_INT_RAW (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_RAW_M (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_RAW_V 0x1
|
|
#define SPI_MEM_IN_DONE_INT_RAW_S 3
|
|
/* SPI_MEM_INLINK_DSCR_ERROR_INT_RAW : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The raw bit for inlink descriptor error.*/
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_RAW (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_RAW_M (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_RAW_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_RAW_S 2
|
|
/* SPI_MEM_OUTLINK_DSCR_ERROR_INT_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The raw bit for outlink descriptor error.*/
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_RAW (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_RAW_M (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_RAW_V 0x1
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_RAW_S 1
|
|
/* SPI_MEM_INLINK_DSCR_EMPTY_INT_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The raw bit for lack of enough inlink descriptors.*/
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_RAW (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_RAW_M (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_RAW_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_RAW_S 0
|
|
|
|
#define SPI_MEM_DMA_INT_ST_REG(i) (REG_SPI_MEM_BASE(i) + 0x070)
|
|
/* SPI_MEM_OUT_TOTAL_EOF_INT_ST : RO ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The status bit for sending all the packets to host done.*/
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ST (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ST_M (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ST_V 0x1
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_ST_S 8
|
|
/* SPI_MEM_OUT_EOF_INT_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The status bit for sending a packet to host done.*/
|
|
#define SPI_MEM_OUT_EOF_INT_ST (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_ST_M (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_ST_V 0x1
|
|
#define SPI_MEM_OUT_EOF_INT_ST_S 7
|
|
/* SPI_MEM_OUT_DONE_INT_ST : RO ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The status bit for completing usage of a outlink descriptor.*/
|
|
#define SPI_MEM_OUT_DONE_INT_ST (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_ST_M (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_ST_V 0x1
|
|
#define SPI_MEM_OUT_DONE_INT_ST_S 6
|
|
/* SPI_MEM_IN_SUC_EOF_INT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The status bit for completing receiving all the packets from host.*/
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ST (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ST_M (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ST_V 0x1
|
|
#define SPI_MEM_IN_SUC_EOF_INT_ST_S 5
|
|
/* SPI_MEM_IN_ERR_EOF_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The status bit for receiving error.*/
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ST (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ST_M (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ST_V 0x1
|
|
#define SPI_MEM_IN_ERR_EOF_INT_ST_S 4
|
|
/* SPI_MEM_IN_DONE_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The status bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_MEM_IN_DONE_INT_ST (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_ST_M (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_ST_V 0x1
|
|
#define SPI_MEM_IN_DONE_INT_ST_S 3
|
|
/* SPI_MEM_INLINK_DSCR_ERROR_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The status bit for inlink descriptor error.*/
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ST (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ST_M (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ST_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_ST_S 2
|
|
/* SPI_MEM_OUTLINK_DSCR_ERROR_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The status bit for outlink descriptor error.*/
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ST (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ST_M (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ST_V 0x1
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_ST_S 1
|
|
/* SPI_MEM_INLINK_DSCR_EMPTY_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The status bit for lack of enough inlink descriptors.*/
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ST (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ST_M (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ST_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_ST_S 0
|
|
|
|
#define SPI_MEM_DMA_INT_CLR_REG(i) (REG_SPI_MEM_BASE(i) + 0x074)
|
|
/* SPI_MEM_OUT_TOTAL_EOF_INT_CLR : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The clear bit for sending all the packets to host done.*/
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_CLR (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_CLR_M (BIT(8))
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_CLR_V 0x1
|
|
#define SPI_MEM_OUT_TOTAL_EOF_INT_CLR_S 8
|
|
/* SPI_MEM_OUT_EOF_INT_CLR : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The clear bit for sending a packet to host done.*/
|
|
#define SPI_MEM_OUT_EOF_INT_CLR (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_CLR_M (BIT(7))
|
|
#define SPI_MEM_OUT_EOF_INT_CLR_V 0x1
|
|
#define SPI_MEM_OUT_EOF_INT_CLR_S 7
|
|
/* SPI_MEM_OUT_DONE_INT_CLR : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The clear bit for completing usage of a outlink descriptor.*/
|
|
#define SPI_MEM_OUT_DONE_INT_CLR (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_CLR_M (BIT(6))
|
|
#define SPI_MEM_OUT_DONE_INT_CLR_V 0x1
|
|
#define SPI_MEM_OUT_DONE_INT_CLR_S 6
|
|
/* SPI_MEM_IN_SUC_EOF_INT_CLR : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The clear bit for completing receiving all the packets from host.*/
|
|
#define SPI_MEM_IN_SUC_EOF_INT_CLR (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_CLR_M (BIT(5))
|
|
#define SPI_MEM_IN_SUC_EOF_INT_CLR_V 0x1
|
|
#define SPI_MEM_IN_SUC_EOF_INT_CLR_S 5
|
|
/* SPI_MEM_IN_ERR_EOF_INT_CLR : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The clear bit for receiving error.*/
|
|
#define SPI_MEM_IN_ERR_EOF_INT_CLR (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_CLR_M (BIT(4))
|
|
#define SPI_MEM_IN_ERR_EOF_INT_CLR_V 0x1
|
|
#define SPI_MEM_IN_ERR_EOF_INT_CLR_S 4
|
|
/* SPI_MEM_IN_DONE_INT_CLR : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The clear bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_MEM_IN_DONE_INT_CLR (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_CLR_M (BIT(3))
|
|
#define SPI_MEM_IN_DONE_INT_CLR_V 0x1
|
|
#define SPI_MEM_IN_DONE_INT_CLR_S 3
|
|
/* SPI_MEM_INLINK_DSCR_ERROR_INT_CLR : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The clear bit for inlink descriptor error.*/
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_CLR (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_CLR_M (BIT(2))
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_CLR_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_ERROR_INT_CLR_S 2
|
|
/* SPI_MEM_OUTLINK_DSCR_ERROR_INT_CLR : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The clear bit for outlink descriptor error.*/
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_CLR (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_CLR_M (BIT(1))
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_CLR_V 0x1
|
|
#define SPI_MEM_OUTLINK_DSCR_ERROR_INT_CLR_S 1
|
|
/* SPI_MEM_INLINK_DSCR_EMPTY_INT_CLR : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The clear bit for lack of enough inlink descriptors.*/
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_CLR (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_CLR_M (BIT(0))
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_CLR_V 0x1
|
|
#define SPI_MEM_INLINK_DSCR_EMPTY_INT_CLR_S 0
|
|
|
|
#define SPI_MEM_IN_ERR_EOF_DES_ADDR_REG(i) (REG_SPI_MEM_BASE(i) + 0x078)
|
|
/* SPI_MEM_DMA_IN_ERR_EOF_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The inlink descriptor address when spi dma produce receiving error.*/
|
|
#define SPI_MEM_DMA_IN_ERR_EOF_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_IN_ERR_EOF_DES_ADDR_M ((SPI_MEM_DMA_IN_ERR_EOF_DES_ADDR_V)<<(SPI_MEM_DMA_IN_ERR_EOF_DES_ADDR_S))
|
|
#define SPI_MEM_DMA_IN_ERR_EOF_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_IN_ERR_EOF_DES_ADDR_S 0
|
|
|
|
#define SPI_MEM_IN_SUC_EOF_DES_ADDR_REG(i) (REG_SPI_MEM_BASE(i) + 0x07C)
|
|
/* SPI_MEM_DMA_IN_SUC_EOF_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The last inlink descriptor address when spi dma produce from_suc_eof.*/
|
|
#define SPI_MEM_DMA_IN_SUC_EOF_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_IN_SUC_EOF_DES_ADDR_M ((SPI_MEM_DMA_IN_SUC_EOF_DES_ADDR_V)<<(SPI_MEM_DMA_IN_SUC_EOF_DES_ADDR_S))
|
|
#define SPI_MEM_DMA_IN_SUC_EOF_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_IN_SUC_EOF_DES_ADDR_S 0
|
|
|
|
#define SPI_MEM_INLINK_DSCR_REG(i) (REG_SPI_MEM_BASE(i) + 0x080)
|
|
/* SPI_MEM_DMA_INLINK_DSCR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current in descriptor pointer.*/
|
|
#define SPI_MEM_DMA_INLINK_DSCR 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_INLINK_DSCR_M ((SPI_MEM_DMA_INLINK_DSCR_V)<<(SPI_MEM_DMA_INLINK_DSCR_S))
|
|
#define SPI_MEM_DMA_INLINK_DSCR_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_INLINK_DSCR_S 0
|
|
|
|
#define SPI_MEM_INLINK_DSCR_BF0_REG(i) (REG_SPI_MEM_BASE(i) + 0x084)
|
|
/* SPI_MEM_DMA_INLINK_DSCR_BF0 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of next in descriptor pointer.*/
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF0 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF0_M ((SPI_MEM_DMA_INLINK_DSCR_BF0_V)<<(SPI_MEM_DMA_INLINK_DSCR_BF0_S))
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF0_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF0_S 0
|
|
|
|
#define SPI_MEM_INLINK_DSCR_BF1_REG(i) (REG_SPI_MEM_BASE(i) + 0x088)
|
|
/* SPI_MEM_DMA_INLINK_DSCR_BF1 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current in descriptor data buffer pointer.*/
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF1 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF1_M ((SPI_MEM_DMA_INLINK_DSCR_BF1_V)<<(SPI_MEM_DMA_INLINK_DSCR_BF1_S))
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF1_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_INLINK_DSCR_BF1_S 0
|
|
|
|
#define SPI_MEM_OUT_EOF_BFR_DES_ADDR_REG(i) (REG_SPI_MEM_BASE(i) + 0x08C)
|
|
/* SPI_MEM_DMA_OUT_EOF_BFR_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The address of buffer relative to the outlink descriptor that produce eof.*/
|
|
#define SPI_MEM_DMA_OUT_EOF_BFR_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUT_EOF_BFR_DES_ADDR_M ((SPI_MEM_DMA_OUT_EOF_BFR_DES_ADDR_V)<<(SPI_MEM_DMA_OUT_EOF_BFR_DES_ADDR_S))
|
|
#define SPI_MEM_DMA_OUT_EOF_BFR_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUT_EOF_BFR_DES_ADDR_S 0
|
|
|
|
#define SPI_MEM_OUT_EOF_DES_ADDR_REG(i) (REG_SPI_MEM_BASE(i) + 0x090)
|
|
/* SPI_MEM_DMA_OUT_EOF_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The last outlink descriptor address when spi dma produce to_eof.*/
|
|
#define SPI_MEM_DMA_OUT_EOF_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUT_EOF_DES_ADDR_M ((SPI_MEM_DMA_OUT_EOF_DES_ADDR_V)<<(SPI_MEM_DMA_OUT_EOF_DES_ADDR_S))
|
|
#define SPI_MEM_DMA_OUT_EOF_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUT_EOF_DES_ADDR_S 0
|
|
|
|
#define SPI_MEM_OUTLINK_DSCR_REG(i) (REG_SPI_MEM_BASE(i) + 0x094)
|
|
/* SPI_MEM_DMA_OUTLINK_DSCR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current out descriptor pointer.*/
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_M ((SPI_MEM_DMA_OUTLINK_DSCR_V)<<(SPI_MEM_DMA_OUTLINK_DSCR_S))
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_S 0
|
|
|
|
#define SPI_MEM_OUTLINK_DSCR_BF0_REG(i) (REG_SPI_MEM_BASE(i) + 0x098)
|
|
/* SPI_MEM_DMA_OUTLINK_DSCR_BF0 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of next out descriptor pointer.*/
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF0 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF0_M ((SPI_MEM_DMA_OUTLINK_DSCR_BF0_V)<<(SPI_MEM_DMA_OUTLINK_DSCR_BF0_S))
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF0_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF0_S 0
|
|
|
|
#define SPI_MEM_OUTLINK_DSCR_BF1_REG(i) (REG_SPI_MEM_BASE(i) + 0x09C)
|
|
/* SPI_MEM_DMA_OUTLINK_DSCR_BF1 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current out descriptor data buffer pointer.*/
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF1 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF1_M ((SPI_MEM_DMA_OUTLINK_DSCR_BF1_V)<<(SPI_MEM_DMA_OUTLINK_DSCR_BF1_S))
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF1_V 0xFFFFFFFF
|
|
#define SPI_MEM_DMA_OUTLINK_DSCR_BF1_S 0
|
|
|
|
#define SPI_MEM_DMA_OUTSTATUS_REG(i) (REG_SPI_MEM_BASE(i) + 0x0A0)
|
|
/* SPI_MEM_DMA_OUTFIFO_EMPTY : RO ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: SPI dma outfifo is empty.*/
|
|
#define SPI_MEM_DMA_OUTFIFO_EMPTY (BIT(31))
|
|
#define SPI_MEM_DMA_OUTFIFO_EMPTY_M (BIT(31))
|
|
#define SPI_MEM_DMA_OUTFIFO_EMPTY_V 0x1
|
|
#define SPI_MEM_DMA_OUTFIFO_EMPTY_S 31
|
|
/* SPI_MEM_DMA_OUTFIFO_FULL : RO ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: SPI dma outfifo is full.*/
|
|
#define SPI_MEM_DMA_OUTFIFO_FULL (BIT(30))
|
|
#define SPI_MEM_DMA_OUTFIFO_FULL_M (BIT(30))
|
|
#define SPI_MEM_DMA_OUTFIFO_FULL_V 0x1
|
|
#define SPI_MEM_DMA_OUTFIFO_FULL_S 30
|
|
/* SPI_MEM_DMA_OUTFIFO_CNT : RO ;bitpos:[29:23] ;default: 7'b0 ; */
|
|
/*description: The remains of SPI dma outfifo data.*/
|
|
#define SPI_MEM_DMA_OUTFIFO_CNT 0x0000007F
|
|
#define SPI_MEM_DMA_OUTFIFO_CNT_M ((SPI_MEM_DMA_OUTFIFO_CNT_V)<<(SPI_MEM_DMA_OUTFIFO_CNT_S))
|
|
#define SPI_MEM_DMA_OUTFIFO_CNT_V 0x7F
|
|
#define SPI_MEM_DMA_OUTFIFO_CNT_S 23
|
|
/* SPI_MEM_DMA_OUT_STATE : RO ;bitpos:[22:20] ;default: 3'b0 ; */
|
|
/*description: SPI dma out data state.*/
|
|
#define SPI_MEM_DMA_OUT_STATE 0x00000007
|
|
#define SPI_MEM_DMA_OUT_STATE_M ((SPI_MEM_DMA_OUT_STATE_V)<<(SPI_MEM_DMA_OUT_STATE_S))
|
|
#define SPI_MEM_DMA_OUT_STATE_V 0x7
|
|
#define SPI_MEM_DMA_OUT_STATE_S 20
|
|
/* SPI_MEM_DMA_OUTDSCR_STATE : RO ;bitpos:[19:18] ;default: 2'b0 ; */
|
|
/*description: SPI dma out descriptor state.*/
|
|
#define SPI_MEM_DMA_OUTDSCR_STATE 0x00000003
|
|
#define SPI_MEM_DMA_OUTDSCR_STATE_M ((SPI_MEM_DMA_OUTDSCR_STATE_V)<<(SPI_MEM_DMA_OUTDSCR_STATE_S))
|
|
#define SPI_MEM_DMA_OUTDSCR_STATE_V 0x3
|
|
#define SPI_MEM_DMA_OUTDSCR_STATE_S 18
|
|
/* SPI_MEM_DMA_OUTDSCR_ADDR : RO ;bitpos:[17:0] ;default: 18'b0 ; */
|
|
/*description: SPI dma out descriptor address.*/
|
|
#define SPI_MEM_DMA_OUTDSCR_ADDR 0x0003FFFF
|
|
#define SPI_MEM_DMA_OUTDSCR_ADDR_M ((SPI_MEM_DMA_OUTDSCR_ADDR_V)<<(SPI_MEM_DMA_OUTDSCR_ADDR_S))
|
|
#define SPI_MEM_DMA_OUTDSCR_ADDR_V 0x3FFFF
|
|
#define SPI_MEM_DMA_OUTDSCR_ADDR_S 0
|
|
|
|
#define SPI_MEM_DMA_INSTATUS_REG(i) (REG_SPI_MEM_BASE(i) + 0x0A4)
|
|
/* SPI_MEM_DMA_INFIFO_EMPTY : RO ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: SPI dma infifo is empty.*/
|
|
#define SPI_MEM_DMA_INFIFO_EMPTY (BIT(31))
|
|
#define SPI_MEM_DMA_INFIFO_EMPTY_M (BIT(31))
|
|
#define SPI_MEM_DMA_INFIFO_EMPTY_V 0x1
|
|
#define SPI_MEM_DMA_INFIFO_EMPTY_S 31
|
|
/* SPI_MEM_DMA_INFIFO_FULL : RO ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: SPI dma infifo is full.*/
|
|
#define SPI_MEM_DMA_INFIFO_FULL (BIT(30))
|
|
#define SPI_MEM_DMA_INFIFO_FULL_M (BIT(30))
|
|
#define SPI_MEM_DMA_INFIFO_FULL_V 0x1
|
|
#define SPI_MEM_DMA_INFIFO_FULL_S 30
|
|
/* SPI_MEM_DMA_INFIFO_CNT : RO ;bitpos:[29:23] ;default: 7'b0 ; */
|
|
/*description: The remains of SPI dma infifo data.*/
|
|
#define SPI_MEM_DMA_INFIFO_CNT 0x0000007F
|
|
#define SPI_MEM_DMA_INFIFO_CNT_M ((SPI_MEM_DMA_INFIFO_CNT_V)<<(SPI_MEM_DMA_INFIFO_CNT_S))
|
|
#define SPI_MEM_DMA_INFIFO_CNT_V 0x7F
|
|
#define SPI_MEM_DMA_INFIFO_CNT_S 23
|
|
/* SPI_MEM_DMA_IN_STATE : RO ;bitpos:[22:20] ;default: 3'b0 ; */
|
|
/*description: SPI dma in data state.*/
|
|
#define SPI_MEM_DMA_IN_STATE 0x00000007
|
|
#define SPI_MEM_DMA_IN_STATE_M ((SPI_MEM_DMA_IN_STATE_V)<<(SPI_MEM_DMA_IN_STATE_S))
|
|
#define SPI_MEM_DMA_IN_STATE_V 0x7
|
|
#define SPI_MEM_DMA_IN_STATE_S 20
|
|
/* SPI_MEM_DMA_INDSCR_STATE : RO ;bitpos:[19:18] ;default: 2'b0 ; */
|
|
/*description: SPI dma in descriptor state.*/
|
|
#define SPI_MEM_DMA_INDSCR_STATE 0x00000003
|
|
#define SPI_MEM_DMA_INDSCR_STATE_M ((SPI_MEM_DMA_INDSCR_STATE_V)<<(SPI_MEM_DMA_INDSCR_STATE_S))
|
|
#define SPI_MEM_DMA_INDSCR_STATE_V 0x3
|
|
#define SPI_MEM_DMA_INDSCR_STATE_S 18
|
|
/* SPI_MEM_DMA_INDSCR_ADDR : RO ;bitpos:[17:0] ;default: 18'b0 ; */
|
|
/*description: SPI dma in descriptor address.*/
|
|
#define SPI_MEM_DMA_INDSCR_ADDR 0x0003FFFF
|
|
#define SPI_MEM_DMA_INDSCR_ADDR_M ((SPI_MEM_DMA_INDSCR_ADDR_V)<<(SPI_MEM_DMA_INDSCR_ADDR_S))
|
|
#define SPI_MEM_DMA_INDSCR_ADDR_V 0x3FFFF
|
|
#define SPI_MEM_DMA_INDSCR_ADDR_S 0
|
|
|
|
#define SPI_MEM_W0_REG(i) (REG_SPI_MEM_BASE(i) + 0x0A8)
|
|
/* SPI_MEM_BUF0 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF0 0xFFFFFFFF
|
|
#define SPI_MEM_BUF0_M ((SPI_MEM_BUF0_V)<<(SPI_MEM_BUF0_S))
|
|
#define SPI_MEM_BUF0_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF0_S 0
|
|
|
|
#define SPI_MEM_W1_REG(i) (REG_SPI_MEM_BASE(i) + 0x0AC)
|
|
/* SPI_MEM_BUF1 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF1 0xFFFFFFFF
|
|
#define SPI_MEM_BUF1_M ((SPI_MEM_BUF1_V)<<(SPI_MEM_BUF1_S))
|
|
#define SPI_MEM_BUF1_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF1_S 0
|
|
|
|
#define SPI_MEM_W2_REG(i) (REG_SPI_MEM_BASE(i) + 0x0B0)
|
|
/* SPI_MEM_BUF2 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF2 0xFFFFFFFF
|
|
#define SPI_MEM_BUF2_M ((SPI_MEM_BUF2_V)<<(SPI_MEM_BUF2_S))
|
|
#define SPI_MEM_BUF2_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF2_S 0
|
|
|
|
#define SPI_MEM_W3_REG(i) (REG_SPI_MEM_BASE(i) + 0x0B4)
|
|
/* SPI_MEM_BUF3 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF3 0xFFFFFFFF
|
|
#define SPI_MEM_BUF3_M ((SPI_MEM_BUF3_V)<<(SPI_MEM_BUF3_S))
|
|
#define SPI_MEM_BUF3_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF3_S 0
|
|
|
|
#define SPI_MEM_W4_REG(i) (REG_SPI_MEM_BASE(i) + 0x0B8)
|
|
/* SPI_MEM_BUF4 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF4 0xFFFFFFFF
|
|
#define SPI_MEM_BUF4_M ((SPI_MEM_BUF4_V)<<(SPI_MEM_BUF4_S))
|
|
#define SPI_MEM_BUF4_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF4_S 0
|
|
|
|
#define SPI_MEM_W5_REG(i) (REG_SPI_MEM_BASE(i) + 0x0BC)
|
|
/* SPI_MEM_BUF5 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF5 0xFFFFFFFF
|
|
#define SPI_MEM_BUF5_M ((SPI_MEM_BUF5_V)<<(SPI_MEM_BUF5_S))
|
|
#define SPI_MEM_BUF5_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF5_S 0
|
|
|
|
#define SPI_MEM_W6_REG(i) (REG_SPI_MEM_BASE(i) + 0x0C0)
|
|
/* SPI_MEM_BUF6 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF6 0xFFFFFFFF
|
|
#define SPI_MEM_BUF6_M ((SPI_MEM_BUF6_V)<<(SPI_MEM_BUF6_S))
|
|
#define SPI_MEM_BUF6_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF6_S 0
|
|
|
|
#define SPI_MEM_W7_REG(i) (REG_SPI_MEM_BASE(i) + 0x0C4)
|
|
/* SPI_MEM_BUF7 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF7 0xFFFFFFFF
|
|
#define SPI_MEM_BUF7_M ((SPI_MEM_BUF7_V)<<(SPI_MEM_BUF7_S))
|
|
#define SPI_MEM_BUF7_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF7_S 0
|
|
|
|
#define SPI_MEM_W8_REG(i) (REG_SPI_MEM_BASE(i) + 0x0C8)
|
|
/* SPI_MEM_BUF8 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF8 0xFFFFFFFF
|
|
#define SPI_MEM_BUF8_M ((SPI_MEM_BUF8_V)<<(SPI_MEM_BUF8_S))
|
|
#define SPI_MEM_BUF8_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF8_S 0
|
|
|
|
#define SPI_MEM_W9_REG(i) (REG_SPI_MEM_BASE(i) + 0x0CC)
|
|
/* SPI_MEM_BUF9 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF9 0xFFFFFFFF
|
|
#define SPI_MEM_BUF9_M ((SPI_MEM_BUF9_V)<<(SPI_MEM_BUF9_S))
|
|
#define SPI_MEM_BUF9_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF9_S 0
|
|
|
|
#define SPI_MEM_W10_REG(i) (REG_SPI_MEM_BASE(i) + 0x0D0)
|
|
/* SPI_MEM_BUF10 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF10 0xFFFFFFFF
|
|
#define SPI_MEM_BUF10_M ((SPI_MEM_BUF10_V)<<(SPI_MEM_BUF10_S))
|
|
#define SPI_MEM_BUF10_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF10_S 0
|
|
|
|
#define SPI_MEM_W11_REG(i) (REG_SPI_MEM_BASE(i) + 0x0D4)
|
|
/* SPI_MEM_BUF11 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF11 0xFFFFFFFF
|
|
#define SPI_MEM_BUF11_M ((SPI_MEM_BUF11_V)<<(SPI_MEM_BUF11_S))
|
|
#define SPI_MEM_BUF11_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF11_S 0
|
|
|
|
#define SPI_MEM_W12_REG(i) (REG_SPI_MEM_BASE(i) + 0x0D8)
|
|
/* SPI_MEM_BUF12 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF12 0xFFFFFFFF
|
|
#define SPI_MEM_BUF12_M ((SPI_MEM_BUF12_V)<<(SPI_MEM_BUF12_S))
|
|
#define SPI_MEM_BUF12_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF12_S 0
|
|
|
|
#define SPI_MEM_W13_REG(i) (REG_SPI_MEM_BASE(i) + 0x0DC)
|
|
/* SPI_MEM_BUF13 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF13 0xFFFFFFFF
|
|
#define SPI_MEM_BUF13_M ((SPI_MEM_BUF13_V)<<(SPI_MEM_BUF13_S))
|
|
#define SPI_MEM_BUF13_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF13_S 0
|
|
|
|
#define SPI_MEM_W14_REG(i) (REG_SPI_MEM_BASE(i) + 0x0E0)
|
|
/* SPI_MEM_BUF14 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF14 0xFFFFFFFF
|
|
#define SPI_MEM_BUF14_M ((SPI_MEM_BUF14_V)<<(SPI_MEM_BUF14_S))
|
|
#define SPI_MEM_BUF14_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF14_S 0
|
|
|
|
#define SPI_MEM_W15_REG(i) (REG_SPI_MEM_BASE(i) + 0x0E4)
|
|
/* SPI_MEM_BUF15 : SRW ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF15 0xFFFFFFFF
|
|
#define SPI_MEM_BUF15_M ((SPI_MEM_BUF15_V)<<(SPI_MEM_BUF15_S))
|
|
#define SPI_MEM_BUF15_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF15_S 0
|
|
|
|
#define SPI_MEM_FLASH_WAITI_CTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x0E8)
|
|
/* SPI_MEM_WAITI_DUMMY_CYCLELEN : R/W ;bitpos:[17:10] ;default: 8'h0 ; */
|
|
/*description: The dummy cycle length when auto wait flash idle*/
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN_M ((SPI_MEM_WAITI_DUMMY_CYCLELEN_V)<<(SPI_MEM_WAITI_DUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN_S 10
|
|
/* SPI_MEM_WAITI_CMD : R/W ;bitpos:[9:2] ;default: 8'h05 ; */
|
|
/*description: The command to auto wait idle*/
|
|
#define SPI_MEM_WAITI_CMD 0x000000FF
|
|
#define SPI_MEM_WAITI_CMD_M ((SPI_MEM_WAITI_CMD_V)<<(SPI_MEM_WAITI_CMD_S))
|
|
#define SPI_MEM_WAITI_CMD_V 0xFF
|
|
#define SPI_MEM_WAITI_CMD_S 2
|
|
/* SPI_MEM_WAITI_DUMMY : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The dummy phase enable when auto wait flash idle*/
|
|
#define SPI_MEM_WAITI_DUMMY (BIT(1))
|
|
#define SPI_MEM_WAITI_DUMMY_M (BIT(1))
|
|
#define SPI_MEM_WAITI_DUMMY_V 0x1
|
|
#define SPI_MEM_WAITI_DUMMY_S 1
|
|
/* SPI_MEM_WAITI_EN : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: auto-waiting flash idle operation when program flash or erase
|
|
flash. 1: enable 0: disable.*/
|
|
#define SPI_MEM_WAITI_EN (BIT(0))
|
|
#define SPI_MEM_WAITI_EN_M (BIT(0))
|
|
#define SPI_MEM_WAITI_EN_V 0x1
|
|
#define SPI_MEM_WAITI_EN_S 0
|
|
|
|
#define SPI_MEM_FLASH_SUS_CMD_REG(i) (REG_SPI_MEM_BASE(i) + 0x0EC)
|
|
/* SPI_MEM_FLASH_PES : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: program erase suspend bit program erase suspend operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PES (BIT(1))
|
|
#define SPI_MEM_FLASH_PES_M (BIT(1))
|
|
#define SPI_MEM_FLASH_PES_V 0x1
|
|
#define SPI_MEM_FLASH_PES_S 1
|
|
/* SPI_MEM_FLASH_PER : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: program erase resume bit program erase suspend operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PER (BIT(0))
|
|
#define SPI_MEM_FLASH_PER_M (BIT(0))
|
|
#define SPI_MEM_FLASH_PER_V 0x1
|
|
#define SPI_MEM_FLASH_PER_S 0
|
|
|
|
#define SPI_MEM_FLASH_SUS_CTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x0F0)
|
|
/* SPI_MEM_FLASH_PES_COMMAND : R/W ;bitpos:[16:9] ;default: 8'h75 ; */
|
|
/*description: Program/Erase suspend command.*/
|
|
#define SPI_MEM_FLASH_PES_COMMAND 0x000000FF
|
|
#define SPI_MEM_FLASH_PES_COMMAND_M ((SPI_MEM_FLASH_PES_COMMAND_V)<<(SPI_MEM_FLASH_PES_COMMAND_S))
|
|
#define SPI_MEM_FLASH_PES_COMMAND_V 0xFF
|
|
#define SPI_MEM_FLASH_PES_COMMAND_S 9
|
|
/* SPI_MEM_FLASH_PER_COMMAND : R/W ;bitpos:[8:1] ;default: 8'h7a ; */
|
|
/*description: Program/Erase resume command.*/
|
|
#define SPI_MEM_FLASH_PER_COMMAND 0x000000FF
|
|
#define SPI_MEM_FLASH_PER_COMMAND_M ((SPI_MEM_FLASH_PER_COMMAND_V)<<(SPI_MEM_FLASH_PER_COMMAND_S))
|
|
#define SPI_MEM_FLASH_PER_COMMAND_V 0xFF
|
|
#define SPI_MEM_FLASH_PER_COMMAND_S 1
|
|
/* SPI_MEM_FLASH_PES_EN : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: Auto-suspending enable*/
|
|
#define SPI_MEM_FLASH_PES_EN (BIT(0))
|
|
#define SPI_MEM_FLASH_PES_EN_M (BIT(0))
|
|
#define SPI_MEM_FLASH_PES_EN_V 0x1
|
|
#define SPI_MEM_FLASH_PES_EN_S 0
|
|
|
|
#define SPI_MEM_SUS_STATUS_REG(i) (REG_SPI_MEM_BASE(i) + 0x0F4)
|
|
/* SPI_MEM_FLASH_SUS : R/W ;bitpos:[0] ;default: 1'h0 ; */
|
|
/*description: The status of flash suspend only used in SPI1.*/
|
|
#define SPI_MEM_FLASH_SUS (BIT(0))
|
|
#define SPI_MEM_FLASH_SUS_M (BIT(0))
|
|
#define SPI_MEM_FLASH_SUS_V 0x1
|
|
#define SPI_MEM_FLASH_SUS_S 0
|
|
|
|
#define SPI_MEM_TIMING_CALI_REG(i) (REG_SPI_MEM_BASE(i) + 0x0F8)
|
|
/* SPI_MEM_EXTRA_DUMMY_CYCLELEN : R/W ;bitpos:[3:2] ;default: 2'd0 ; */
|
|
/*description: add extra dummy spi clock cycle length for spi clock calibration.*/
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN 0x00000003
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN_M ((SPI_MEM_EXTRA_DUMMY_CYCLELEN_V)<<(SPI_MEM_EXTRA_DUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN_V 0x3
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN_S 2
|
|
/* SPI_MEM_TIMING_CALI : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The bit is used to enable timing auto-calibration for all reading operations.*/
|
|
#define SPI_MEM_TIMING_CALI (BIT(1))
|
|
#define SPI_MEM_TIMING_CALI_M (BIT(1))
|
|
#define SPI_MEM_TIMING_CALI_V 0x1
|
|
#define SPI_MEM_TIMING_CALI_S 1
|
|
/* SPI_MEM_TIMING_CLK_ENA : R/W ;bitpos:[0] ;default: 1'b1 ; */
|
|
/*description: The bit is used to enable timing adjust clock for all reading operations.*/
|
|
#define SPI_MEM_TIMING_CLK_ENA (BIT(0))
|
|
#define SPI_MEM_TIMING_CLK_ENA_M (BIT(0))
|
|
#define SPI_MEM_TIMING_CLK_ENA_V 0x1
|
|
#define SPI_MEM_TIMING_CLK_ENA_S 0
|
|
|
|
#define SPI_MEM_DIN_MODE_REG(i) (REG_SPI_MEM_BASE(i) + 0x0FC)
|
|
/* SPI_MEM_DIN3_MODE : R/W ;bitpos:[11:9] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN3_MODE 0x00000007
|
|
#define SPI_MEM_DIN3_MODE_M ((SPI_MEM_DIN3_MODE_V)<<(SPI_MEM_DIN3_MODE_S))
|
|
#define SPI_MEM_DIN3_MODE_V 0x7
|
|
#define SPI_MEM_DIN3_MODE_S 9
|
|
/* SPI_MEM_DIN2_MODE : R/W ;bitpos:[8:6] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN2_MODE 0x00000007
|
|
#define SPI_MEM_DIN2_MODE_M ((SPI_MEM_DIN2_MODE_V)<<(SPI_MEM_DIN2_MODE_S))
|
|
#define SPI_MEM_DIN2_MODE_V 0x7
|
|
#define SPI_MEM_DIN2_MODE_S 6
|
|
/* SPI_MEM_DIN1_MODE : R/W ;bitpos:[5:3] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN1_MODE 0x00000007
|
|
#define SPI_MEM_DIN1_MODE_M ((SPI_MEM_DIN1_MODE_V)<<(SPI_MEM_DIN1_MODE_S))
|
|
#define SPI_MEM_DIN1_MODE_V 0x7
|
|
#define SPI_MEM_DIN1_MODE_S 3
|
|
/* SPI_MEM_DIN0_MODE : R/W ;bitpos:[2:0] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN0_MODE 0x00000007
|
|
#define SPI_MEM_DIN0_MODE_M ((SPI_MEM_DIN0_MODE_V)<<(SPI_MEM_DIN0_MODE_S))
|
|
#define SPI_MEM_DIN0_MODE_V 0x7
|
|
#define SPI_MEM_DIN0_MODE_S 0
|
|
|
|
#define SPI_MEM_DIN_NUM_REG(i) (REG_SPI_MEM_BASE(i) + 0x100)
|
|
/* SPI_MEM_DIN3_NUM : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN3_NUM 0x00000003
|
|
#define SPI_MEM_DIN3_NUM_M ((SPI_MEM_DIN3_NUM_V)<<(SPI_MEM_DIN3_NUM_S))
|
|
#define SPI_MEM_DIN3_NUM_V 0x3
|
|
#define SPI_MEM_DIN3_NUM_S 6
|
|
/* SPI_MEM_DIN2_NUM : R/W ;bitpos:[5:4] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN2_NUM 0x00000003
|
|
#define SPI_MEM_DIN2_NUM_M ((SPI_MEM_DIN2_NUM_V)<<(SPI_MEM_DIN2_NUM_S))
|
|
#define SPI_MEM_DIN2_NUM_V 0x3
|
|
#define SPI_MEM_DIN2_NUM_S 4
|
|
/* SPI_MEM_DIN1_NUM : R/W ;bitpos:[3:2] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN1_NUM 0x00000003
|
|
#define SPI_MEM_DIN1_NUM_M ((SPI_MEM_DIN1_NUM_V)<<(SPI_MEM_DIN1_NUM_S))
|
|
#define SPI_MEM_DIN1_NUM_V 0x3
|
|
#define SPI_MEM_DIN1_NUM_S 2
|
|
/* SPI_MEM_DIN0_NUM : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN0_NUM 0x00000003
|
|
#define SPI_MEM_DIN0_NUM_M ((SPI_MEM_DIN0_NUM_V)<<(SPI_MEM_DIN0_NUM_S))
|
|
#define SPI_MEM_DIN0_NUM_V 0x3
|
|
#define SPI_MEM_DIN0_NUM_S 0
|
|
|
|
#define SPI_MEM_DOUT_MODE_REG(i) (REG_SPI_MEM_BASE(i) + 0x104)
|
|
/* SPI_MEM_DOUT3_MODE : R/W ;bitpos:[11:9] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT3_MODE 0x00000007
|
|
#define SPI_MEM_DOUT3_MODE_M ((SPI_MEM_DOUT3_MODE_V)<<(SPI_MEM_DOUT3_MODE_S))
|
|
#define SPI_MEM_DOUT3_MODE_V 0x7
|
|
#define SPI_MEM_DOUT3_MODE_S 9
|
|
/* SPI_MEM_DOUT2_MODE : R/W ;bitpos:[8:6] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT2_MODE 0x00000007
|
|
#define SPI_MEM_DOUT2_MODE_M ((SPI_MEM_DOUT2_MODE_V)<<(SPI_MEM_DOUT2_MODE_S))
|
|
#define SPI_MEM_DOUT2_MODE_V 0x7
|
|
#define SPI_MEM_DOUT2_MODE_S 6
|
|
/* SPI_MEM_DOUT1_MODE : R/W ;bitpos:[5:3] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT1_MODE 0x00000007
|
|
#define SPI_MEM_DOUT1_MODE_M ((SPI_MEM_DOUT1_MODE_V)<<(SPI_MEM_DOUT1_MODE_S))
|
|
#define SPI_MEM_DOUT1_MODE_V 0x7
|
|
#define SPI_MEM_DOUT1_MODE_S 3
|
|
/* SPI_MEM_DOUT0_MODE : R/W ;bitpos:[2:0] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT0_MODE 0x00000007
|
|
#define SPI_MEM_DOUT0_MODE_M ((SPI_MEM_DOUT0_MODE_V)<<(SPI_MEM_DOUT0_MODE_S))
|
|
#define SPI_MEM_DOUT0_MODE_V 0x7
|
|
#define SPI_MEM_DOUT0_MODE_S 0
|
|
|
|
#define SPI_MEM_DOUT_NUM_REG(i) (REG_SPI_MEM_BASE(i) + 0x108)
|
|
/* SPI_MEM_DOUT3_NUM : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DOUT3_NUM 0x00000003
|
|
#define SPI_MEM_DOUT3_NUM_M ((SPI_MEM_DOUT3_NUM_V)<<(SPI_MEM_DOUT3_NUM_S))
|
|
#define SPI_MEM_DOUT3_NUM_V 0x3
|
|
#define SPI_MEM_DOUT3_NUM_S 6
|
|
/* SPI_MEM_DOUT2_NUM : R/W ;bitpos:[5:4] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DOUT2_NUM 0x00000003
|
|
#define SPI_MEM_DOUT2_NUM_M ((SPI_MEM_DOUT2_NUM_V)<<(SPI_MEM_DOUT2_NUM_S))
|
|
#define SPI_MEM_DOUT2_NUM_V 0x3
|
|
#define SPI_MEM_DOUT2_NUM_S 4
|
|
/* SPI_MEM_DOUT1_NUM : R/W ;bitpos:[3:2] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DOUT1_NUM 0x00000003
|
|
#define SPI_MEM_DOUT1_NUM_M ((SPI_MEM_DOUT1_NUM_V)<<(SPI_MEM_DOUT1_NUM_S))
|
|
#define SPI_MEM_DOUT1_NUM_V 0x3
|
|
#define SPI_MEM_DOUT1_NUM_S 2
|
|
/* SPI_MEM_DOUT0_NUM : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DOUT0_NUM 0x00000003
|
|
#define SPI_MEM_DOUT0_NUM_M ((SPI_MEM_DOUT0_NUM_V)<<(SPI_MEM_DOUT0_NUM_S))
|
|
#define SPI_MEM_DOUT0_NUM_V 0x3
|
|
#define SPI_MEM_DOUT0_NUM_S 0
|
|
|
|
#define SPI_SMEM_TIMING_CALI_REG(i) (REG_SPI_MEM_BASE(i) + 0x10C)
|
|
/* SPI_SMEM_EXTRA_DUMMY_CYCLELEN : R/W ;bitpos:[3:2] ;default: 2'd0 ; */
|
|
/*description: For sram add extra dummy spi clock cycle length for spi clock calibration.*/
|
|
#define SPI_SMEM_EXTRA_DUMMY_CYCLELEN 0x00000003
|
|
#define SPI_SMEM_EXTRA_DUMMY_CYCLELEN_M ((SPI_SMEM_EXTRA_DUMMY_CYCLELEN_V)<<(SPI_SMEM_EXTRA_DUMMY_CYCLELEN_S))
|
|
#define SPI_SMEM_EXTRA_DUMMY_CYCLELEN_V 0x3
|
|
#define SPI_SMEM_EXTRA_DUMMY_CYCLELEN_S 2
|
|
/* SPI_SMEM_TIMING_CALI : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: For sram the bit is used to enable timing auto-calibration for
|
|
all reading operations.*/
|
|
#define SPI_SMEM_TIMING_CALI (BIT(1))
|
|
#define SPI_SMEM_TIMING_CALI_M (BIT(1))
|
|
#define SPI_SMEM_TIMING_CALI_V 0x1
|
|
#define SPI_SMEM_TIMING_CALI_S 1
|
|
/* SPI_SMEM_TIMING_CLK_ENA : R/W ;bitpos:[0] ;default: 1'b1 ; */
|
|
/*description: For sram the bit is used to enable timing adjust clock for all
|
|
reading operations.*/
|
|
#define SPI_SMEM_TIMING_CLK_ENA (BIT(0))
|
|
#define SPI_SMEM_TIMING_CLK_ENA_M (BIT(0))
|
|
#define SPI_SMEM_TIMING_CLK_ENA_V 0x1
|
|
#define SPI_SMEM_TIMING_CLK_ENA_S 0
|
|
|
|
#define SPI_SMEM_DIN_MODE_REG(i) (REG_SPI_MEM_BASE(i) + 0x110)
|
|
/* SPI_SMEM_DIN3_MODE : R/W ;bitpos:[11:9] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_SMEM_DIN3_MODE 0x00000007
|
|
#define SPI_SMEM_DIN3_MODE_M ((SPI_SMEM_DIN3_MODE_V)<<(SPI_SMEM_DIN3_MODE_S))
|
|
#define SPI_SMEM_DIN3_MODE_V 0x7
|
|
#define SPI_SMEM_DIN3_MODE_S 9
|
|
/* SPI_SMEM_DIN2_MODE : R/W ;bitpos:[8:6] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_SMEM_DIN2_MODE 0x00000007
|
|
#define SPI_SMEM_DIN2_MODE_M ((SPI_SMEM_DIN2_MODE_V)<<(SPI_SMEM_DIN2_MODE_S))
|
|
#define SPI_SMEM_DIN2_MODE_V 0x7
|
|
#define SPI_SMEM_DIN2_MODE_S 6
|
|
/* SPI_SMEM_DIN1_MODE : R/W ;bitpos:[5:3] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_SMEM_DIN1_MODE 0x00000007
|
|
#define SPI_SMEM_DIN1_MODE_M ((SPI_SMEM_DIN1_MODE_V)<<(SPI_SMEM_DIN1_MODE_S))
|
|
#define SPI_SMEM_DIN1_MODE_V 0x7
|
|
#define SPI_SMEM_DIN1_MODE_S 3
|
|
/* SPI_SMEM_DIN0_MODE : R/W ;bitpos:[2:0] ;default: 3'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_SMEM_DIN0_MODE 0x00000007
|
|
#define SPI_SMEM_DIN0_MODE_M ((SPI_SMEM_DIN0_MODE_V)<<(SPI_SMEM_DIN0_MODE_S))
|
|
#define SPI_SMEM_DIN0_MODE_V 0x7
|
|
#define SPI_SMEM_DIN0_MODE_S 0
|
|
|
|
#define SPI_SMEM_DIN_NUM_REG(i) (REG_SPI_MEM_BASE(i) + 0x114)
|
|
/* SPI_SMEM_DIN3_NUM : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DIN3_NUM 0x00000003
|
|
#define SPI_SMEM_DIN3_NUM_M ((SPI_SMEM_DIN3_NUM_V)<<(SPI_SMEM_DIN3_NUM_S))
|
|
#define SPI_SMEM_DIN3_NUM_V 0x3
|
|
#define SPI_SMEM_DIN3_NUM_S 6
|
|
/* SPI_SMEM_DIN2_NUM : R/W ;bitpos:[5:4] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DIN2_NUM 0x00000003
|
|
#define SPI_SMEM_DIN2_NUM_M ((SPI_SMEM_DIN2_NUM_V)<<(SPI_SMEM_DIN2_NUM_S))
|
|
#define SPI_SMEM_DIN2_NUM_V 0x3
|
|
#define SPI_SMEM_DIN2_NUM_S 4
|
|
/* SPI_SMEM_DIN1_NUM : R/W ;bitpos:[3:2] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DIN1_NUM 0x00000003
|
|
#define SPI_SMEM_DIN1_NUM_M ((SPI_SMEM_DIN1_NUM_V)<<(SPI_SMEM_DIN1_NUM_S))
|
|
#define SPI_SMEM_DIN1_NUM_V 0x3
|
|
#define SPI_SMEM_DIN1_NUM_S 2
|
|
/* SPI_SMEM_DIN0_NUM : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DIN0_NUM 0x00000003
|
|
#define SPI_SMEM_DIN0_NUM_M ((SPI_SMEM_DIN0_NUM_V)<<(SPI_SMEM_DIN0_NUM_S))
|
|
#define SPI_SMEM_DIN0_NUM_V 0x3
|
|
#define SPI_SMEM_DIN0_NUM_S 0
|
|
|
|
#define SPI_SMEM_DOUT_MODE_REG(i) (REG_SPI_MEM_BASE(i) + 0x118)
|
|
/* SPI_SMEM_DOUT3_MODE : R/W ;bitpos:[11:9] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_SMEM_DOUT3_MODE 0x00000007
|
|
#define SPI_SMEM_DOUT3_MODE_M ((SPI_SMEM_DOUT3_MODE_V)<<(SPI_SMEM_DOUT3_MODE_S))
|
|
#define SPI_SMEM_DOUT3_MODE_V 0x7
|
|
#define SPI_SMEM_DOUT3_MODE_S 9
|
|
/* SPI_SMEM_DOUT2_MODE : R/W ;bitpos:[8:6] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_SMEM_DOUT2_MODE 0x00000007
|
|
#define SPI_SMEM_DOUT2_MODE_M ((SPI_SMEM_DOUT2_MODE_V)<<(SPI_SMEM_DOUT2_MODE_S))
|
|
#define SPI_SMEM_DOUT2_MODE_V 0x7
|
|
#define SPI_SMEM_DOUT2_MODE_S 6
|
|
/* SPI_SMEM_DOUT1_MODE : R/W ;bitpos:[5:3] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_SMEM_DOUT1_MODE 0x00000007
|
|
#define SPI_SMEM_DOUT1_MODE_M ((SPI_SMEM_DOUT1_MODE_V)<<(SPI_SMEM_DOUT1_MODE_S))
|
|
#define SPI_SMEM_DOUT1_MODE_V 0x7
|
|
#define SPI_SMEM_DOUT1_MODE_S 3
|
|
/* SPI_SMEM_DOUT0_MODE : R/W ;bitpos:[2:0] ;default: 3'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_SMEM_DOUT0_MODE 0x00000007
|
|
#define SPI_SMEM_DOUT0_MODE_M ((SPI_SMEM_DOUT0_MODE_V)<<(SPI_SMEM_DOUT0_MODE_S))
|
|
#define SPI_SMEM_DOUT0_MODE_V 0x7
|
|
#define SPI_SMEM_DOUT0_MODE_S 0
|
|
|
|
#define SPI_SMEM_DOUT_NUM_REG(i) (REG_SPI_MEM_BASE(i) + 0x11C)
|
|
/* SPI_SMEM_DOUT3_NUM : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DOUT3_NUM 0x00000003
|
|
#define SPI_SMEM_DOUT3_NUM_M ((SPI_SMEM_DOUT3_NUM_V)<<(SPI_SMEM_DOUT3_NUM_S))
|
|
#define SPI_SMEM_DOUT3_NUM_V 0x3
|
|
#define SPI_SMEM_DOUT3_NUM_S 6
|
|
/* SPI_SMEM_DOUT2_NUM : R/W ;bitpos:[5:4] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DOUT2_NUM 0x00000003
|
|
#define SPI_SMEM_DOUT2_NUM_M ((SPI_SMEM_DOUT2_NUM_V)<<(SPI_SMEM_DOUT2_NUM_S))
|
|
#define SPI_SMEM_DOUT2_NUM_V 0x3
|
|
#define SPI_SMEM_DOUT2_NUM_S 4
|
|
/* SPI_SMEM_DOUT1_NUM : R/W ;bitpos:[3:2] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DOUT1_NUM 0x00000003
|
|
#define SPI_SMEM_DOUT1_NUM_M ((SPI_SMEM_DOUT1_NUM_V)<<(SPI_SMEM_DOUT1_NUM_S))
|
|
#define SPI_SMEM_DOUT1_NUM_V 0x3
|
|
#define SPI_SMEM_DOUT1_NUM_S 2
|
|
/* SPI_SMEM_DOUT0_NUM : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_SMEM_DOUT0_NUM 0x00000003
|
|
#define SPI_SMEM_DOUT0_NUM_M ((SPI_SMEM_DOUT0_NUM_V)<<(SPI_SMEM_DOUT0_NUM_S))
|
|
#define SPI_SMEM_DOUT0_NUM_V 0x3
|
|
#define SPI_SMEM_DOUT0_NUM_S 0
|
|
|
|
#define SPI_MEM_CLOCK_GATE_REG(i) (REG_SPI_MEM_BASE(i) + 0x120)
|
|
/* SPI_MEM_CLK_EN : R/W ;bitpos:[0] ;default: 1'b1 ; */
|
|
/*description: */
|
|
#define SPI_MEM_CLK_EN (BIT(0))
|
|
#define SPI_MEM_CLK_EN_M (BIT(0))
|
|
#define SPI_MEM_CLK_EN_V 0x1
|
|
#define SPI_MEM_CLK_EN_S 0
|
|
|
|
#define SPI_MEM_DATE_REG(i) (REG_SPI_MEM_BASE(i) + 0x3FC)
|
|
/* SPI_MEM_DATE : R/W ;bitpos:[27:0] ;default: 28'h1810250 ; */
|
|
/*description: SPI register version.*/
|
|
#define SPI_MEM_DATE 0x0FFFFFFF
|
|
#define SPI_MEM_DATE_M ((SPI_MEM_DATE_V)<<(SPI_MEM_DATE_S))
|
|
#define SPI_MEM_DATE_V 0xFFFFFFF
|
|
#define SPI_MEM_DATE_S 0
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
#endif /*_SOC_SPI_MEM_REG_H_ */
|
|
|
|
|