79 lines
2.8 KiB
Markdown
79 lines
2.8 KiB
Markdown
# Semihosting VFS driver example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example demonstrates how to use semihosting VFS driver with ESP32. Example does the following steps:
|
|
|
|
1. Uses `esp_vfs_semihost_register` function to register exposed host directory in VFS, enabling C standard library and POSIX functions to be used.
|
|
2. Redirects `stdout` from the UART to the file on the host using `freopen`.
|
|
3. Prints several messages to the redirected.
|
|
4. Switches back to UART `stdout` using `freopen`.
|
|
5. Opens text file on the host.
|
|
6. Reads the file and prints its content on stdout.
|
|
|
|
## How to use example
|
|
|
|
### Hardware and tools required
|
|
|
|
This example does not require any special hardware, and can be run on any common development board.
|
|
This example requires [OpenOCD](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/jtag-debugging/index.html#run-openocd).
|
|
NOTE: In order to run this example you need OpenOCD version `v0.10.0-esp32-20190313` or later.
|
|
|
|
Run OpenOCD using command:
|
|
```
|
|
bin/openocd -s share/openocd/scripts -f interface/ftdi/esp32_devkitj_v1.cfg -c 'set ESP_SEMIHOST_BASEDIR '$IDF_PATH/examples/storage/semihost_vfs/data -f board/esp-wroom-32.cfg
|
|
```
|
|
This command also configures OpenOCD to expose example project `data` subdirectory to the target's semihosting VFS driver.
|
|
|
|
### Build and flash
|
|
|
|
Replace PORT with serial port name:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example output
|
|
|
|
There are two types of outputs produced by example:
|
|
1. File `esp32_stdout.txt` in the host directory mounted to the target:
|
|
|
|
```
|
|
W (274) example: Switched to semihosted stdout
|
|
Semihosted stdout write 0
|
|
Semihosted stdout write 1
|
|
Semihosted stdout write 2
|
|
...
|
|
Semihosted stdout write 98
|
|
Semihosted stdout write 99
|
|
W (274) example: Switch to UART stdout
|
|
```
|
|
|
|
2. On the boards console:
|
|
|
|
```
|
|
W (274) example: Switch to semihosted stdout
|
|
W (274) example: Switched back to UART stdout
|
|
I (274) example: Wrote 2798 bytes
|
|
====================== HOST DATA START =========================
|
|
The following are the graphical (non-control) characters defined by
|
|
ISO 8859-1 (1987). Descriptions in words aren't all that helpful,
|
|
but they're the best we can do in text. A graphics file illustrating
|
|
the character set should be available from the same archive as this
|
|
file.
|
|
|
|
Hex Description Hex Description
|
|
|
|
20 SPACE
|
|
...
|
|
7D RIGHT CURLY BRACKET FD SMALL LETTER Y WITH ACUTE
|
|
7E TILDE FE SMALL LETTER THORN (Icelandic)
|
|
FF SMALL LETTER Y WITH DIAERESIS
|
|
====================== HOST DATA END =========================
|
|
I (694) example: Read 6121 bytes
|
|
```
|
|
|