Based on app-trace component, it's able to send sniffer packets to host via JTAG interface.
136 lines
7.4 KiB
Markdown
136 lines
7.4 KiB
Markdown
# Simple Sniffer Example
|
||
|
||
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
||
|
||
## Overview
|
||
|
||
This example demonstrates basic usage of WiFi sniffer mode by saving packets into SD card with pcap format. We can send pcap file to host via JTAG interface as well.
|
||
|
||
For more information about pcap, please go to [wikipedia](https://en.wikipedia.org/wiki/Pcap).
|
||
|
||
This example is based on console component. For more information about console, please refer to [console guide](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/console.html).
|
||
|
||
## How to use example
|
||
|
||
### Hardware Required
|
||
|
||
To run this example, you should have one ESP32 dev board integrated with a SD card slot (e.g [ESP-WROVER-KIT](https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/modules-and-boards.html#esp-wrover-kit-v4-1)) or just connect [ESP32-DevKitC](https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/modules-and-boards.html#esp32-devkitc-v4) to a SD card breakout board.
|
||
If you want to send packets to host, make sure to connect ESP32 to some kind of [JTAG adapter](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/jtag-debugging/index.html#jtag-debugging-selecting-jtag-adapter).
|
||
|
||
### Configure the project
|
||
|
||
Enter `make menuconfig` if you are using GNU Make based build system or enter `idf.py menuconfig` if you are using CMake based build system. Then go into `Example Configuration` menu.
|
||
|
||
- Check `Store command history in flash` if you want to save command history into flash (recommend).
|
||
- Select where to save the pcap file in `Select destination to store pcap file` menu item.
|
||
- `SD Card` means saving packets (pcap format) into the SD card you plug in.
|
||
- `JTAG (App Trace)` means sending packets (pcap format) to host via JTAG interface. This feature depends on [app trace component](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/app_trace.html).
|
||
- Set the mount point in your filesystem in `SD card mount point in the filesystem` menu item. This configuration only takes effect when you choose to save packets into SD card.
|
||
- Set max name length of pcap file in `Max name length of pcap file` menu item.
|
||
- Set the length of sniffer work queue in `Length of sniffer work queue` menu item.
|
||
- Set the stack size of the sniffer task in `Stack size of sniffer task` menu item.
|
||
- Set the priority of the sniffer task `Length of sniffer work queue` menu item.
|
||
|
||
### Build and Flash
|
||
|
||
Enter `make -j4 flash monitor` if you are using GNU Make based build system or enter `idf.py build flash monitor` if you' are using CMake based build system.
|
||
|
||
(To exit the serial monitor, type ``Ctrl-]``.)
|
||
|
||
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
|
||
|
||
## Example Output
|
||
|
||
### `sniffer` Command Usage
|
||
|
||
> sniffer [-f <file>][-i ] [-F <mgmt|data|ctrl|misc|mpdu|ampdu>]... [-c <channel>][--stop]
|
||
> Capture specific packet and store in pcap format
|
||
> -f, --file=<file> name of the file storing the packets in pcap format
|
||
> -i, --interface=<wlan> which interface to capture packet
|
||
> -F, --filter=<mgmt|data|ctrl|misc|mpdu|ampdu> filter parameters
|
||
> -c, --channel=<channel> communication channel to use
|
||
> --stop stop running sniffer
|
||
|
||
The `sniffer` command support some important options as follow:
|
||
|
||
* `-f`: Specify the name of file who will store the packets, default value is `sniffer`, and the resulting file name will be like “snifferX.pcap”, here ‘X’ shows the file’s order.
|
||
* `-i`: Specify the interface to sniffer packets, currently only support `wlan`
|
||
* `-c` :Specify the channel to sniffer packet
|
||
* `-F`: Specify the filter condition, currently only support following filter conditions, you can select any number of them
|
||
* mgmt: Management packets
|
||
* data: Data packets
|
||
* ctrl: Control packets
|
||
* misc: Other packets
|
||
* mpdu: MPDU packets
|
||
* ampdu: AMPDU packets
|
||
* `--stop`: Stop sniffer job
|
||
|
||
### Mount SD Card
|
||
|
||
```bash
|
||
=======================================================
|
||
| Steps to sniffer WiFi packets |
|
||
| |
|
||
| 1. Enter 'help' to check all commands' usage |
|
||
| 2. Enter 'mount <device>' to mount filesystem |
|
||
| 3. Enter 'sniffer' to start capture packets |
|
||
| 4. Enter 'unmount <device>' to unmount filesystem |
|
||
| |
|
||
=======================================================
|
||
|
||
esp32> mount sd
|
||
I (158912) example: Initializing SD card
|
||
I (158912) example: Using SDMMC peripheral
|
||
I (158912) gpio: GPIO[13]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
|
||
Name: SA16G
|
||
Type: SDHC/SDXC
|
||
Speed: 20 MHz
|
||
Size: 14832MB
|
||
```
|
||
|
||
### Start Sniffer
|
||
|
||
```bash
|
||
esp32> sniffer -f sniffer-example -i wlan -c 2
|
||
I (8946) cmd_sniffer: open file successfully
|
||
W (8966) phy_init: failed to load RF calibration data (0x1102), falling back to full calibration
|
||
I (9176) phy: phy_version: 4100, 6fa5e27, Jan 25 2019, 17:02:06, 0, 2
|
||
I (9186) wifi: ic_enable_sniffer
|
||
I (9196) cmd_sniffer: start WiFi promiscuous ok
|
||
esp32> sniffer --stop
|
||
I (31456) wifi: ic_disable_sniffer
|
||
I (31456) wifi: flush txq
|
||
I (31456) wifi: stop sw txq
|
||
I (31456) wifi: lmac stop hw txq
|
||
I (31456) cmd_sniffer: stop WiFi promiscuous ok
|
||
```
|
||
|
||
### Unmount SD Card
|
||
|
||
```bash
|
||
esp32> unmount sd
|
||
I (248800) example: Card unmounted
|
||
```
|
||
|
||
### Steps for sending packets to host via JTAG interface
|
||
1. Select `JTAG (App Trace)` as the destination of pcap files.
|
||
2. Build & Flash with `idf.py build flash` or `make flash`.
|
||
3. Connect JTAG, run OpenOCD (for more information about how-to please refer to [JTAG Debugging](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/jtag-debugging/index.html)).
|
||
4. Telnet to localhost with 4444 port: `telnet localhost 4444`.
|
||
5. In the telnet session, run command like `esp32 apptrace start file://sniffer-esp32.pcap 1 -1 20` (more information about this command, please refer to [apptrace command](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/app_trace.html#openocd-application-level-tracing-commands)).
|
||
6. Run the example, start sniffer with command `sniffer` (you don't need to specify the filename, because it has been set in step5).
|
||
7. Stop sniffer by entering command `sniffer --stop` in the example console.
|
||
8. Stop tracing by entering command `esp32 apptrace stop` in the telnet session.
|
||
|
||
|
||
### Open PCap File in Wireshark
|
||
|
||
![sniffer-example0.pcap](sniffer-esp32-pcap.png)
|
||
|
||
## Troubleshooting
|
||
|
||
- Make sure you have pluged in your SD card and mount it into filesystem before doing sniffer work or you will get error message like “Create file /sdcard/sniffer0.pcap failed”.
|
||
- To protect the SD card, we recommand you to execute command `unmount sd` before you plug out your SD card.
|
||
- Make sure to run `esp32 apptrace` command before or immediately after a new sniffer task started when you try this example with JTAG. Otherwise the console will issue warning message `waiting for apptrace established` every 1 second. If the apptrace communication doesn't be established within 10 seconds (can be altered by macro `SNIFFER_APPTRACE_RETRY`), this sniffer command will failed with an error message `waiting for apptrace established timeout`.
|
||
|
||
(For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you as soon as possible.)
|