115 lines
9.2 KiB
C
115 lines
9.2 KiB
C
#define ASSIST_DEBUG_BASE DR_REG_ASSIST_DEBUG_BASE
|
||
|
||
#define ASSIST_DEBUG_INTERRUPT_ENA ((ASSIST_DEBUG_BASE) +0x00)
|
||
#define ASSIST_DEBUG_INTERRUPT_RAW ((ASSIST_DEBUG_BASE) +0x04)
|
||
#define ASSIST_DEBUG_INTERRUPT_RLS ((ASSIST_DEBUG_BASE) +0x08)
|
||
#define ASSIST_DEBUG_INTERRUPT_CLR ((ASSIST_DEBUG_BASE) +0x0C)
|
||
#define ASSIST_DEBUG_INTERRUPT_AREA_0_TOUCH_PRO_RD BIT(0)
|
||
#define ASSIST_DEBUG_INTERRUPT_AREA_0_TOUCH_PRO_WR BIT(1)
|
||
#define ASSIST_DEBUG_INTERRUPT_AREA_1_TOUCH_PRO_RD BIT(2)
|
||
#define ASSIST_DEBUG_INTERRUPT_AREA_1_TOUCH_PRO_WR BIT(3)
|
||
#define ASSIST_DEBUG_INTERRUPT_PRO_SP_SPILL_MIN BIT(4)
|
||
#define ASSIST_DEBUG_INTERRUPT_PRO_SP_SPILL_MAX BIT(5)
|
||
|
||
|
||
#define ASSIST_DEBUG_AREA_0_MIN ((ASSIST_DEBUG_BASE) +0x10)
|
||
#define ASSIST_DEBUG_AREA_0_MAX ((ASSIST_DEBUG_BASE) +0x14)
|
||
#define ASSIST_DEBUG_AREA_0_PC ((ASSIST_DEBUG_BASE) +0x18)
|
||
#define ASSIST_DEBUG_AREA_0_SP ((ASSIST_DEBUG_BASE) +0x1C)
|
||
|
||
#define ASSIST_DEBUG_AREA_1_MIN ((ASSIST_DEBUG_BASE) +0x20)
|
||
#define ASSIST_DEBUG_AREA_1_MAX ((ASSIST_DEBUG_BASE) +0x24)
|
||
#define ASSIST_DEBUG_AREA_1_PC ((ASSIST_DEBUG_BASE) +0x28)
|
||
#define ASSIST_DEBUG_AREA_1_SP ((ASSIST_DEBUG_BASE) +0x2C)
|
||
|
||
#define ASSIST_DEBUG_PRO_SP_UNSTABLE ((ASSIST_DEBUG_BASE) +0x30)
|
||
#define ASSIST_DEBUG_PRO_SP_MIN ((ASSIST_DEBUG_BASE) +0x34)
|
||
#define ASSIST_DEBUG_PRO_SP_MAX ((ASSIST_DEBUG_BASE) +0x38)
|
||
#define ASSIST_DEBUG_PRO_SP_PC ((ASSIST_DEBUG_BASE) +0x3C)
|
||
|
||
#define ASSIST_DEBUG_PRO_PDEBUGENABLE ((ASSIST_DEBUG_BASE) +0x40)
|
||
#define ASSIST_DEBUG_PRO_RCD_RECORDING ((ASSIST_DEBUG_BASE) +0x44)
|
||
#define ASSIST_DEBUG_PRO_RCD_PDEBUGINST ((ASSIST_DEBUG_BASE) +0x48)
|
||
/* register layout:
|
||
* SIZE [7..0] : Instructions normally complete in the W stage. The size of the instruction in the W is given
|
||
* by this field in number of bytes. If it is 8’b0 in a given cycle the W stage has no completing
|
||
* instruction. This is also known as a bubble cycle. Also see DPORT_PRO_CPU_RECORD_PDEBUGSTATUS_REG.
|
||
* ISRC [14..12] : Instruction source.
|
||
** LOOP [23..20] : Loopback status.
|
||
** CINTLEVEL [27..24]: CINTLEVEL.
|
||
*/
|
||
#define DPORT_RECORD_PDEBUGINST_SZ_M ((DPORT_RECORD_PDEBUGINST_SZ_V)<<(DPORT_RECORD_PDEBUGINST_SZ_S))
|
||
#define DPORT_RECORD_PDEBUGINST_SZ_V 0xFF
|
||
#define DPORT_RECORD_PDEBUGINST_SZ_S 0
|
||
#define DPORT_RECORD_PDEBUGINST_SZ(_r_) (((_r_)>>DPORT_RECORD_PDEBUGINST_SZ_S) & DPORT_RECORD_PDEBUGINST_SZ_V)
|
||
#define DPORT_RECORD_PDEBUGINST_ISRC_M ((DPORT_RECORD_PDEBUGINST_ISRC_V)<<(DPORT_RECORD_PDEBUGINST_ISRC_S))
|
||
#define DPORT_RECORD_PDEBUGINST_ISRC_V 0x07
|
||
#define DPORT_RECORD_PDEBUGINST_ISRC_S 12
|
||
#define DPORT_RECORD_PDEBUGINST_ISRC(_r_) (((_r_)>>DPORT_RECORD_PDEBUGINST_ISRC_S) & DPORT_RECORD_PDEBUGINST_ISRC_V)
|
||
// #define DPORT_RECORD_PDEBUGINST_LOOP_M ((DPORT_RECORD_PDEBUGINST_LOOP_V)<<(DPORT_RECORD_PDEBUGINST_LOOP_S))
|
||
// #define DPORT_RECORD_PDEBUGINST_LOOP_V 0x0F
|
||
// #define DPORT_RECORD_PDEBUGINST_LOOP_S 20
|
||
// #define DPORT_RECORD_PDEBUGINST_LOOP(_r_) (((_r_)>>DPORT_RECORD_PDEBUGINST_LOOP_S) & DPORT_RECORD_PDEBUGINST_LOOP_V)
|
||
#define DPORT_RECORD_PDEBUGINST_LOOP_REP (BIT(20)) /* loopback will occur */
|
||
#define DPORT_RECORD_PDEBUGINST_LOOP (BIT(21)) /* last inst of loop */
|
||
#define DPORT_RECORD_PDEBUGINST_CINTL_M ((DPORT_RECORD_PDEBUGINST_CINTL_V)<<(DPORT_RECORD_PDEBUGINST_CINTL_S))
|
||
#define DPORT_RECORD_PDEBUGINST_CINTL_V 0x0F
|
||
#define DPORT_RECORD_PDEBUGINST_CINTL_S 24
|
||
#define DPORT_RECORD_PDEBUGINST_CINTL(_r_) (((_r_)>>DPORT_RECORD_PDEBUGINST_CINTL_S) & DPORT_RECORD_PDEBUGINST_CINTL_V)
|
||
|
||
#define ASSIST_DEBUG_PRO_RCD_PDEBUGSTATUS ((ASSIST_DEBUG_BASE) +0x4C)
|
||
/* register layout:
|
||
* BBCAUSE [5..0]: Indicates cause for bubble cycle. See below for posible values. When DPORT_RECORD_PDEBUGINST_SZ == 0
|
||
* INSNTYPE[5..0]: Indicates type of instruction retiring in the W stage. See below for posible values. When DPORT_RECORD_PDEBUGINST_SZ > 0
|
||
*/
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_M ((DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_V)<<(DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_S))
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_V 0x3F
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_S 0
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE(_r_) (((_r_)>>DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_S) & DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_V)
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_PSO 0x00 /* Power shut off */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_DEP 0x02 /* Register dependency or resource conflict. See DPORT_XXX_CPU_RECORD_PDEBUGDATA_REG for extra info. */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_CTL 0x04 /* Control transfer bubble */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_ICM 0x08 /* I-cache miss (incl uncached miss) */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_DCM 0x0C /* D-cache miss (excl uncached miss) */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_EXC0 0x10 /* Exception or interrupt (W stage). See DPORT_XXX_CPU_RECORD_PDEBUGDATA_REG for extra info.
|
||
The virtual address of the instruction that was killed appears on DPORT_PRO_CPU_RECORD_PDEBUGPC_REG[31:0] */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_EXC1 0x11 /* Exception or interrupt (W+1 stage). See DPORT_XXX_CPU_RECORD_PDEBUGDATA_REG for extra info. */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_RPL 0x14 /* Instruction replay (other). DPORT_XXX_CPU_RECORD_PDEBUGDATA_REG has the PC of the replaying instruction. */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_ITLB 0x18 /* HW ITLB refill. The refill address and data are available on
|
||
DPORT_PRO_CPU_RECORD_PDEBUGLS0ADDR_REG and DPORT_PRO_CPU_RECORD_PDEBUGLS0DATA_REG. */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_ITLBM 0x1A /* ITLB miss */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_DTLB 0x1C /* HW DTLB refill. The refill address and data are available on
|
||
DPORT_PRO_CPU_RECORD_PDEBUGLS0ADDR_REG and DPORT_PRO_CPU_RECORD_PDEBUGLS0DATA_REG. */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_DTLBM 0x1E /* DTLB miss */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_STALL 0x20 /* Stall . The cause of the global stall is further classified in the DPORT_XXX_CPU_RECORD_PDEBUGDATA_REG. */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_HWMEC 0x24 /* HW-corrected memory error */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_WAITI 0x28 /* WAITI mode */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_BBCAUSE_OTHER 0x3C /* all other bubbles */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_M ((DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_V)<<(DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_S))
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_V 0x3F
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_S 0
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE(_r_) (((_r_)>>DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_S) & DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_V)
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_JX 0x00 /* JX */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_CALLX 0x04 /* CALLX */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_CRET 0x08 /* All call returns */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_ERET 0x0C /* All exception returns */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_B 0x10 /* Branch taken or loop not taken */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_J 0x14 /* J */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_CALL 0x18 /* CALL */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_BN 0x1C /* Branch not taken */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_LOOP 0x20 /* Loop instruction (taken) */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_S32C1I 0x24 /* S32C1I. The address and load data (before the conditional store) are available on the LS signals*/
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_WXSR2LB 0x28 /* WSR/XSR to LBEGIN */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_WSR2MMID 0x2C /* WSR to MMID */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_RWXSR 0x30 /* RSR or WSR (except MMID and LBEGIN) or XSR (except LBEGIN) */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_RWER 0x34 /* RER or WER */
|
||
#define DPORT_RECORD_PDEBUGSTATUS_INSNTYPE_DEF 0x3C /* Default */
|
||
|
||
|
||
#define ASSIST_DEBUG_PRO_RCD_PDEBUGDATA ((ASSIST_DEBUG_BASE) +0x50)
|
||
#define ASSIST_DEBUG_PRO_RCD_PDEBUGPC ((ASSIST_DEBUG_BASE) +0x54)
|
||
#define ASSIST_DEBUG_PRO_RCD_PDEBUGLS0STAT ((ASSIST_DEBUG_BASE) +0x58)
|
||
#define ASSIST_DEBUG_PRO_RCD_PDEBUGLS0ADDR ((ASSIST_DEBUG_BASE) +0x5C)
|
||
#define ASSIST_DEBUG_PRO_RCD_PDEBUGLS0DATA ((ASSIST_DEBUG_BASE) +0x60)
|
||
#define ASSIST_DEBUG_PRO_RCD_SP ((ASSIST_DEBUG_BASE) +0x64)
|
||
|