113 lines
No EOL
4.3 KiB
Markdown
113 lines
No EOL
4.3 KiB
Markdown
# ESP-IDF iBeacon demo
|
||
|
||
From welcoming people as they arrive at a sporting event to providing information about a nearby museum exhibit, iBeacon opens a new world of possibilities for location awareness, and countless opportunities for interactivity between iOS devices and iBeacon hardware.
|
||
|
||
## Using Example
|
||
|
||
iBeacon is a trademark of Apple Inc.
|
||
|
||
Before building devices which use iBeacon technology, visit https://developer.apple.com/ibeacon/ to obtain a license.
|
||
|
||
### iBeacon Mode
|
||
|
||
This example demonstrates iBeacon-compatible BLE advertising, and scanning of iBeacons:
|
||
|
||
- **IBEACON_SENDER**: demo to send iBeacon-compatible advertising data.
|
||
|
||
- **IBEACON_RECEIVER**: demo to receive and resolve iBeacon advertising data.
|
||
|
||
Which demo will be run depends on the menuconfig, developers can set it in `iBeacon Example Configuration`.
|
||
|
||
The default mode is iBeacon Sender.
|
||
|
||
### Menuconfig
|
||
Before compiling the demo，developers also need to configure the menuconfig:
|
||
|
||
```c
|
||
make menuconfig
|
||
```
|
||
And then enter `Component config->Bluetooth->Bluedroid Enable`
|
||
|
||
Because the number of peripherals may be very large, developers can enable the **BLE Scan Duplicate Options**, the maximum number of devices in scan duplicate filter depends on the free heap size, when the cache is full, it is cleared.
|
||
|
||
### Event Processing
|
||
In the iBeacon receiver demo, the scan result will be posted to `ESP_GAP_SEARCH_INQ_RES_EVT` event:
|
||
|
||
```c
|
||
switch (scan_result->scan_rst.search_evt) {
|
||
case ESP_GAP_SEARCH_INQ_RES_EVT:
|
||
/* Search for BLE iBeacon Packet */
|
||
......
|
||
break;
|
||
default:
|
||
break;
|
||
}
|
||
|
||
```
|
||
### Build and Flash
|
||
|
||
Build each project and flash it to the board, then run monitor tool to view serial output:
|
||
|
||
```
|
||
make -j4 flash monitor
|
||
```
|
||
|
||
(To exit the serial monitor, type ``Ctrl-]``.)
|
||
|
||
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
||
|
||
## Example Output
|
||
|
||
The iBeacon sender will broadcast iBeacon packet after initializing the Bluetooth protocol stack, and the iBeacon receiver will scan the iBeacon packet.
|
||
|
||
### iBeacon Sender
|
||
|
||
```
|
||
I (384) boot: Loaded app from partition at offset 0x10000
|
||
I (384) boot: Disabling RNG early entropy source...
|
||
I (386) cpu_start: Pro cpu up.
|
||
I (389) cpu_start: Starting app cpu, entry point is 0x40081010
|
||
I (0) cpu_start: App cpu up.
|
||
I (400) heap_init: Initializing. RAM available for dynamic allocation:
|
||
I (406) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM
|
||
I (413) heap_init: At 3FFCCCA8 len 00013358 (76 KiB): DRAM
|
||
I (419) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
|
||
I (425) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
|
||
I (431) heap_init: At 40090E58 len 0000F1A8 (60 KiB): IRAM
|
||
I (438) cpu_start: Pro cpu start user code
|
||
I (120) cpu_start: Starting scheduler on PRO CPU
|
||
I (0) cpu_start: Starting scheduler on APP CPU
|
||
I (244) BTDM_INIT: BT controller compile version [44d04c1]
|
||
|
||
I (244) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
||
I (624) phy: phy_version: 3910, c0c45a3, May 21 2018, 18:07:06, 0, 0
|
||
I (654) IBEACON_DEMO: register callback
|
||
```
|
||
|
||
### iBeacon Receiver
|
||
|
||
```
|
||
I (384) boot: Loaded app from partition at offset 0x10000
|
||
I (384) boot: Disabling RNG early entropy source...
|
||
I (385) cpu_start: Pro cpu up.\0x1b[0m
|
||
I (389) cpu_start: Starting app cpu, entry point is 0x40081010
|
||
I (0) cpu_start: App cpu up.
|
||
I (400) heap_init: Initializing. RAM available for dynamic allocation:
|
||
I (406) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM
|
||
I (412) heap_init: At 3FFCCC88 len 00013378 (76 KiB): DRAM
|
||
I (418) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
|
||
I (425) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
|
||
I (431) heap_init: At 40090E58 len 0000F1A8 (60 KiB): IRAM
|
||
I (437) cpu_start: Pro cpu start user code\0x1b[0m
|
||
I (120) cpu_start: Starting scheduler on PRO CPU.
|
||
I (0) cpu_start: Starting scheduler on APP CPU.
|
||
I (243) BTDM_INIT: BT controller compile version [44d04c1]
|
||
|
||
I (243) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
||
I (633) phy: phy_version: 3910, c0c45a3, May 21 2018, 18:07:06, 0, 0
|
||
I (663) IBEACON_DEMO: register callback
|
||
I (329203) IBEACON_DEMO: ----------iBeacon Found----------
|
||
I (329203) IBEACON_DEMO: Device address:: 30 ae a4 00 42 82
|
||
I (329203) IBEACON_DEMO: Proximity UUID:: fd a5 06 93 a4 e2 4f b1 af cf c6 eb 07 64 78 25
|
||
```
|
||
|