OVMS3-idf/examples/bluetooth/ble_mesh/ble_mesh_node/README.md
Island fc3253163e component/ble_mesh: ESP BLE Mesh release
1. BLE Mesh Core

* Provisioning: Node Role
    * Advertising and GATT bearer
    * Authentication OOB

* Provisioning: Provisioner Role
    * Advertising and GATT bearer
    * Authentication OOB

* Networking
    * Relay
    * Segmentation and Reassembly
    * Key Refresh
    * IV Update

* Proxy Support

* Multiple Client Models Run Simultaneously
    * Support multiple client models send packets to different nodes simultaneously
    * No blocking between client model and server

* NVS Storage
    * Store Provisioning Data of BLE Mesh Nodes in Flash

2. BLE Mesh Applications

* BLE Mesh Node & Provisioner
    * Node Example
    * Provisioner Example
    * Node + Generic OnOff Client Example

* Fast Provisioning
    * Vendor Fast Prov Server Model
    * Vendor Fast Prov Client Model
    * Examples

* Wi-Fi & BLE Mesh Coexistence
    * Example

* BLE Mesh Console Commands
    * Example

3. BLE Mesh Models

* Foundation Models
    * Configuration Server Model
    * Configuration Client Model
    * Health Server Model
    * Health Client Model

* Generic Client Models
    * Generic OnOff Client
    * Generic Level Client
    * Generic Location Client
    * Generic Default Transition Timer Client
    * Generic Power OnOff Client
    * Generic Power Level Client
    * Generic Battery Client
    * Generic Property Client

* Generic Server Models
    * Generic OnOff Server (Example)

* Lighting Client Models
    * Light Lightness Client
    * Light CTL Client
    * Light HSL Client
    * Light xyL Client
    * Light LC Client

* Sensor Client Model
    * Sensor Client

* Time and Scenes Client Models
    * Time Client
    * Scene Client
    * Scheduler Client
2019-06-24 11:31:24 +08:00

1.2 KiB
Raw Blame History

ESP BLE Mesh Node demo

This demo shows how BLE Mesh device can be set up as a node with the following features:

  • One element
  • Two SIG models
    • Configuration Server model: The role of this model is mainly to configure Provisioner devices AppKey and set up its relay function, TTL size, subscription, etc.
    • OnOff Server model: This model implements the most basic function of turning the lights on and off.

The default purpose of this demo is to enable the advertising function with 20-ms non-connectable interval in BLE 5.0. You can disable this function through menuconfig: make menuconfig --> Example Configuration --> This option facilitates sending with 20ms non-connectable interval...

For a better demonstration effect, an RGB LED can be soldered onto the ESP32-DevKitC board, by connecting their corresponding GPIO pins are GPIO_NUM_25, GPIO_NUM_26, GPIO_NUM_27. Then you need to select the following option in menuconfig: make menuconfig --> Example Configuration --> Board selection for BLE Mesh --> ESP-WROOM-32

Please check the tutorial for more information about this example.