2008f4d88c
1. Name change from chopper to carrier, block diagram update, minor changes to example codes 2. mcpwm_reg.h changed, brought uniformity in comments, worked on suggestions, duty to accept float. Some name changes! 3. Minor readme changes and Indetation 4. Minor change: move mcpwm_reg.h and mcpwm_struct.h to new path 5. Minor change: addition of BLDC example code and Readme 6. Name changed from epwm to mcpwm 7. Improve the reg name in mcpwm_struct.h 8. Name change chopper>carrier, deadband>deadtime
22 lines
832 B
Markdown
22 lines
832 B
Markdown
# MCPWM brushed dc motor control Example
|
|
|
|
This example will show you how to use MCPWM module to control brushed dc motor, you need to make connection between ESP32 and motor driver
|
|
|
|
This code is tested with L298 motor driver, user needs to make changes according to the driver they use
|
|
|
|
Motor first moves forward, then backward and then stops for 2 Secs each countinuously
|
|
|
|
|
|
## Step 1: Pin assignment
|
|
* GPIO15 is assigned as the enable/input 1 for motor driver
|
|
* GPIO16 is assigned as the enable/input 2 for motor driver
|
|
|
|
|
|
## Step 2: Connection
|
|
* connect GPIO15 with input 1 of motor driver
|
|
* connect GPIO16 with input 2 of motor driver
|
|
|
|
|
|
## Step 3: Initialize MCPWM
|
|
* You need to set the frequency and duty cycle of MCPWM timer
|
|
* You need to set the MCPWM channel you want to use, and bind the channel with one of the timers
|