houchenyao
e5717e365f
test: add driver/gpio test case
2018-06-12 19:04:30 +08:00
Mahavir Jain
eef8d0f7ed
Resolve required include header dependencies in component itself
...
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-12 11:19:39 +05:30
Angus Gratton
87077a5478
test: Tweaks to reduce variation in CI unit tests
...
spi test: Prime the flash cache before each test to minimise flash cache misses.
VFS performance test: Increase the number of runs to minimise influence of an isolated bad run.
2018-06-08 14:42:44 +10:00
Michael (XIAO Xufeng)
939e5693a5
chore(spi): fix the terms of native to iomux
2018-06-06 06:08:39 +00:00
michael
75cdbcefc7
test(spi): add test for SPI timing
2018-06-06 06:08:39 +00:00
michael
208d993de1
test(spi_master): slightly modify the test
2018-06-06 06:08:39 +00:00
michael
5cf7d3768d
feat(spi_master): fine tune the timing of SPI
2018-06-06 06:08:39 +00:00
Angus Gratton
c9f8470fdf
Merge branch 'feature/rmt_translator' into 'master'
...
driver(rmt): Add API supports sending uint8_t type data
See merge request idf/esp-idf!1975
2018-05-23 07:27:14 +08:00
Angus Gratton
75c27202f7
Merge branch 'feature/update_touchpad_filter_process' into 'master'
...
driver(touchpad): Change the measuring mode, improve the software filter.
See merge request idf/esp-idf!2358
2018-05-22 09:56:55 +08:00
kooho
5bc8ae3b3a
driver(rmt):Add API supports sending uint8_t type data.
2018-05-22 01:55:44 +00:00
michael
f613859e29
feat(sdio_slave): add new driver for sdio_slave
2018-05-21 23:48:47 +08:00
Angus Gratton
0c64ef9600
Merge branch 'bugfix/sdio_write_unaligned_len' into 'master'
...
SDIO: allow read/write operations for lengths not divisible by 4
See merge request idf/esp-idf!2278
2018-05-21 15:26:32 +08:00
Wangjialin
09181b7d94
driver(touchpad): improve touchpad filter mode and update examples.
2018-05-21 14:45:31 +08:00
Jiang Jiang Jian
35d148256b
Merge branch 'bugfix/fix_uart_buffer_full_flg_error_bug' into 'master'
...
driver(uart): Fix the bug that uart buffer_full flag is true all the time.
See merge request idf/esp-idf!2418
2018-05-21 14:09:44 +08:00
Jiang Jiang Jian
9c53b599b2
Merge branch 'bugfix/i2c_add_xqueue_static_allocation' into 'master'
...
driver(i2c, rmt): Add xQueue and xSemaphore static allocation support when intr_alloc_flag set to ESP_INTR_FLAG_IRAM.
See merge request idf/esp-idf!2335
2018-05-21 10:29:31 +08:00
Angus Gratton
03414b1f39
Merge branch 'bugfix/reset_some_peripherals_when_cpu_start' into 'master'
...
driver: Reset communication peripherals when cpu start up.
See merge request idf/esp-idf!2296
2018-05-21 09:53:42 +08:00
kooho
f6f9f93a9d
driver(i2c, rmt):Add intr_flag setting to ESP_INTR_FLAG_IRAM support when enable psram.
2018-05-21 09:37:56 +08:00
wangmengyang
22e21b38f7
component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
...
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
kooho
33b99caf50
driver(uart):Fix the bug that uart buffer_full flag is true all the time.
2018-05-18 16:46:10 +08:00
kooho
ef39c09bc1
driver: reset communication peripherals when the cpu starts.
2018-05-18 14:41:58 +08:00
Roland Dobai
18e83bcd53
Allow VFS file descriptors in select()
2018-05-18 08:06:33 +02:00
Jiang Jiang Jian
cf9499479c
Merge branch 'bugfix/i2s_mix_result_with_error_code_master' into 'master'
...
fix i2s mix result and error code
See merge request idf/esp-idf!2227
2018-05-17 21:53:06 +08:00
Jiang Jiang Jian
8c657dfee4
Merge branch 'bugfix/fix_an_error_in_comment_of_uart_driver' into 'master'
...
deiver(uart):revise the explanation of uart break length
See merge request idf/esp-idf!2398
2018-05-17 17:17:14 +08:00
Jiang Jiang Jian
993b8b7bf6
Merge branch 'bugfix/o3_fails' into 'master'
...
Fix compilation errors when -O3 is used
See merge request idf/esp-idf!2396
2018-05-17 16:48:13 +08:00
Zhang Zhao Xiang
9deb58859c
fix i2s mix result and error code
2018-05-17 10:59:04 +08:00
Angus Gratton
b2e264ef52
Merge branch 'feature/ledc_add_api_set_hpoint_val' into 'master'
...
driver(ledc): fix duty and fade issues and add thread-safe version APIs.
See merge request idf/esp-idf!2233
2018-05-16 19:52:26 +08:00
Jiang Jiang Jian
4b4a587540
Merge branch 'bugfix/touch_change_default_enable_value' into 'master'
...
bugfix(touch): change the default value for sar_touch_enable register.
See merge request idf/esp-idf!1870
2018-05-16 17:40:18 +08:00
Angus Gratton
fcd5d0869d
Merge branch 'bugfix/spi_native_pins' into 'master'
...
fix several spi issues about pin configurations
See merge request idf/esp-idf!2309
2018-05-15 14:19:20 +08:00
Angus Gratton
31d53bc059
Merge branch 'bugfix/sdspi_delayed_write_response' into 'master'
...
sdspi: handle delayed response to data write command
See merge request idf/esp-idf!2290
2018-05-15 10:32:21 +08:00
Jiang Jiang Jian
73d20981de
Merge branch 'bugfix/rmt_tx_stop_bug' into 'master'
...
driver(rmt): RMT tx stop workaround
See merge request idf/esp-idf!1915
2018-05-15 10:04:33 +08:00
Jiang Jiang Jian
33b11c6f6a
Merge branch 'feature/adjust_log_level_about_uart' into 'master'
...
feat: Adjust log level about UART
See merge request idf/esp-idf!2047
2018-05-15 09:59:21 +08:00
Ivan Grokhotkov
9379d7b9f9
sdmmc: wait for command done event even if data transfer is over
...
This fixes errors logged on the console: sdmmc_req:
handle_idle_state_events unhandled: 00000004 00000000
The issue happens if "data done" event occurs before "command done".
State machine code did not check *which* event occurred in
SENDING_CMD state, and went to IDLE or SENDING_DATA state on any
non-error event. In this case, we can't process "data done" event
until command has completed. This change introduces "unhandled event"
mask, which is carried over from one run of process_events to the
other. This allows waiting for the "command done" event to complete,
and then process "data done" event.
Ref TW17126.
2018-05-15 09:59:20 +08:00
Ivan Grokhotkov
cf81db40a2
sdio: allow reads/writes with lengths not divisible by 4
...
CMD53 in byte mode supports transfers of any number of bytes between 1
and 512. This change removes limitation that the number of bytes must
be divisible by 4. Host quirk, that such transfers must be split into
two commands (one for the aligned part and the other one for
unaligned) is taken into account.
2018-05-15 09:59:20 +08:00
chenjianqiang
b5de860bcb
revise the explain of a parameter(brk_len) in uart driver file
2018-05-14 19:47:16 +08:00
kooho
a8d26d7e4d
driver(rmt):Fix rmt_tx_stop bug.
2018-05-14 19:46:30 +08:00
Roland Dobai
ca08397b6b
Fix compilation errors when -O3 is used
...
Closes https://github.com/espressif/esp-idf/issues/718
2018-05-14 12:29:57 +02:00
jack
c384fa2492
rename clock enable and reset bits for SPI modules
...
1.The names of clock enable and reset bits do not match with TRM, just rename them.
2018-05-14 16:45:03 +08:00
kooho
1bebec05c6
driver(ledc): fix duty and fade issues and add thread-safe version APIs.
...
1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914
2. Fix the duty overflow issue when duty_scale is set to 1.
3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit.
4. Add thread-safe version APIs to set duty and fade.
5. Correct the duty range in driver.
2018-05-14 12:27:21 +08:00
Angus Gratton
e23ee9fa73
Merge branch 'bugfix/ledc_error' into 'master'
...
ledc driver: Clarify logging of function argument errors
See merge request idf/esp-idf!2380
2018-05-14 09:16:02 +08:00
Angus Gratton
64c52022b9
Merge branch 'bugfix/add_comments_for_adc' into 'master'
...
driver(adc): Add descriptions that starting ADC can trigger interrupt of GPIO36…
See merge request idf/esp-idf!1910
2018-05-11 18:54:40 +08:00
kooho
d53661a663
driver(adc): add descriptions for the issue that starting ADC can trigger interrupt of GPIO36 and GPIO39.
2018-05-11 17:08:58 +08:00
Mahavir Jain
b2a1a79eb4
i2s: fix issue in dma descriptor allocation if SPIRAM is enabled
...
It has been observed that, if external SPIRAM is enabled, then under
certain scenarios (e.g. internal memory being too much fragmented),
I2S tx/rx descriptors can land in external SPIRAM and hence resulting
in failure in DMA. Adding explicit capability to allocate in only DMA
capable memory.
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-05-10 18:26:01 +05:30
Angus Gratton
feb64c3be6
ledc driver: Clarify logging of function argument errors
...
Some parameter errors did not specify which parameter was invalid.
Adds a new macro to name the invalid param.
2018-05-10 17:21:35 +08:00
Ivan Grokhotkov
a2556229aa
Merge branch 'bugfix/uart_fix_get_baudrate_error_bug' into 'master'
...
driver(uart): Fix uart_get_baudrate incorrect return value when using ref_tick
See merge request idf/esp-idf!2295
2018-05-08 20:25:13 +08:00
michael
197f594b06
fix(spi): fix the issue when bus flag not set, dual mode cannot be used.
2018-05-08 15:47:26 +08:00
michael
28beafc624
fix(spi): fix the issue that native pins don't work after SPI initialized before
2018-05-08 15:47:25 +08:00
Michael (XIAO Xufeng)
1f085b1a3b
feat(gpio): add function allowing switching input source from GPIO back to IOMUX
2018-05-08 15:47:25 +08:00
Angus Gratton
b90ad81f22
driver: Add notes to SPI driver docs about thread safety
2018-05-07 09:03:48 +08:00
kooho
0dca2d4c68
driver(uart): Fix uart_get_baudrate incorrect return value when using ref_tick
2018-05-04 09:41:41 +08:00
Liu Zhi Fu
ed46976f41
esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine
...
Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-04-27 15:02:30 +08:00