Commit graph

24 commits

Author SHA1 Message Date
Sagar Bijwe
a3b5a23b87 nvs_flash: Version compatibility check for nvs storage
This change adds a check for compatibility between the nvs version
found on nvs flash and the one assumed by running code during nvs
initialization. Any mismatch is reported to the user using new error
code ESP_ERR_NVS_NEW_VERSION_FOUND.
2018-08-08 12:43:50 +05:30
Angus Gratton
d0b8f2865f docs: Switch base URL from esp-idf.readthedocs.io to docs.espressif.com 2018-06-19 11:23:33 +00:00
Anuj Deshpande
6238459dd7 docs: Fix broken link in nvs and jtag example
- Closes https://github.com/espressif/esp-idf/issues/1922
2018-05-07 12:38:20 +05:30
Angus Gratton
fa3205737f partition_table: Check configured flash size fits in partition table
Check happens at build time, so flash size config may need to be changed.

Also fixes MD5_OPT undefined warning, closes https://github.com/espressif/esp-idf/issues/1867
2018-04-26 09:51:55 +10:00
Roland Dobai
27a63c492f Examples: Demonstrate the usage of esp_err_to_name 2018-03-13 14:27:00 +01:00
Ivan Grokhotkov
95ff76890b examples/wear_levelling: update readme file
Fixes https://github.com/espressif/esp-idf/issues/627.
2018-02-11 13:03:36 +08:00
Ivan Grokhotkov
59859fa53c fatfs: add configuration of allocation unit size
Closes https://github.com/espressif/esp-idf/issues/1382.
2018-02-11 13:03:36 +08:00
Martin Pomezný
e7693b8700 GPIO2 note updated
Updated note on GPIO2 with informations about possible pull-down resistor.

Merges https://github.com/espressif/esp-idf/pull/1451
2018-01-03 10:48:57 +11:00
Adrián Paníček
0f2d417a74 Small typo fix
Signed-off-by: krzychb

Merges https://github.com/espressif/esp-idf/pull/1331
2017-12-01 09:06:09 +01:00
Ivan Grokhotkov
a5f96b22d1 examples/sdmmc: enable internal pull-ups in SD mode
Some development boards do not have sufficient external pull-ups on
SD card pins. Most notably, if high level on GPIO13 is not registered
by the card when GO_IDLE_STATE command is received, the card will enter
SPI mode and further communication will not be possible, until power to
the card is toggled.

This change enables internal pull-ups on SD card pins in an attempt to
make this initialization process more reliable.
2017-10-13 08:21:06 +08:00
me-no-dev
dd87deb278 Add SPIFFS Component to IDF 2017-09-11 19:56:40 +03:00
krzychb
b69379941b Fixed broken links in documentation 2017-09-07 18:48:15 +02:00
Ivan Grokhotkov
002f38fa8f Merge branch 'feature/sdspi_driver' into 'master'
SD SPI mode driver

This MR adds functionality to support SD cards connected via SPI interface.
Additionally, two bugs are fixed:
- Definition of `SPI_TRANS_MODE_DIOQIO_ADDR` in spi_master driver
- SD card probing frequency was 4000kHz instead of 400kHz as required by the standard

See merge request !727
2017-07-26 13:51:37 +08:00
Dmitry Yakovlev
e5bb45f381 driver: SD protocol driver for SPI peripheral 2017-07-20 13:43:07 +08:00
Ivan Grokhotkov
979fce0df5 bt: call nvs_flash_init in examples, show error if NVS is not initialized
NVS is used to store PHY calibration data, WiFi configuration, and BT
configuration. Previously BT examples did not call nvs_flash_init,
relying on the fact that it is called during PHY init. However PHY init
did not handle possible NVS initialization errors.

This change moves PHY init procedure into the application, and adds
diagnostic messages to BT config management routines if NVS is not
initialized.
2017-07-17 21:29:50 +08:00
Ivan Grokhotkov
52b51df859 add wear_levelling component and example 2017-04-17 11:01:17 +08:00
Angus Gratton
821c70f5d7 examples: Standardise naming of files, symbols, etc. in examples
* Use "example" in all example function & variable names,
  ie use i2c_example_xxx instead of i2c_xxx for example functions.
  Closes #198 https://github.com/espressif/esp-idf/issues/198
* Mark example functions, etc. static
* Replace uses of "test" & "demo" with "example"
* Split the UART example into two
* Rename "main" example files to end with "_main.c" for disambiguation
2017-03-27 17:42:05 +11:00
Ivan Grokhotkov
4813ab2d28 examples: check return value of nvs_flash_init
nvs_flash_init may return an error code in some cases, and applications
should check this error code (or at least assert on it being ESP_OK, to
make potential issues more immediately obvious).

This change modifies all the examples which use NVS to check the error
code. Most examples get a simple ESP_ERROR_CHECK assert, while NVS
examples, OTA example, and NVS unit tests get a more verbose check which
may be used in real applications.
2017-03-15 10:44:54 +08:00
Angus Gratton
5ea9097dbd esptool: Update to latest v2.0 beta version
* New "espefuse.py set_flash_voltage" command to easily set a fix
  VDD_SDIO regulator voltage (1.8V, 3.3V or disabled).
* Fixes bugs when flashing files with non-4-byte aligned lengths
  (doesn't effect esp-idf image files)
* README improvements
2017-03-03 15:34:04 +11:00
krzychb
0b6598c492 Added README.md to example category folders 2017-01-18 21:03:15 +01:00
krzychb
8aa5082baa Fixed memory leak in example, ref. https://github.com/espressif/esp-idf/issues/209 2017-01-17 21:20:24 +01:00
krzychb
66647bb5bd Typo corrections 2017-01-17 21:12:54 +01:00
Krzysztof Budzynski
ad25997349 Updated links to examples in new folders / categories in api documentation 2017-01-16 23:08:36 +01:00
Krzysztof Budzynski
382999b378 Moved examples to new folders / categories. Removed example numbers from example names 2017-01-16 23:08:35 +01:00