Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

GPIO2 note updated

Browse source 
Updated note on GPIO2 with informations about possible pull-down resistor.

Merges https://github.com/espressif/esp-idf/pull/1451
This commit is contained in:
Martin Pomezný 2017-12-30 00:05:56 +01:00 committed by Angus Gratton
parent a834c069f1
commit e7693b8700
1 changed files with 2 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
examples/storage/sd_card/README.md
View file

@ -37,6 +37,8 @@ With the given pinout for SPI mode, same connections between the SD card and ESP
GPIO2 pin is used as a bootstrapping pin, and should be low to enter UART download mode. One way to do this is to connect GPIO0 and GPIO2 using a jumper, and then the auto-reset circuit on most development boards will pull GPIO2 low along with GPIO0, when entering download mode.
- Some boards have pulldown and/or LED on GPIO2. LED is usually ok, but pulldown will interfere with D0 signals and must be removed. Check the schematic of your development board for anything connected to GPIO2.
### Note about GPIO12
GPIO12 is used as a bootstrapping pin to select output voltage of an internal regulator which powers the flash chip (VDD_SDIO). This pin has an internal pulldown so if left unconnected it will read low at reset (selecting default 3.3V operation). When adding a pullup to this pin for SD card operation, consider the following: