Commit graph

74 commits

Author SHA1 Message Date
Roland Dobai
744c2dcdd9 Resolve problems found by enabling -Wwrite-strings compilation flag 2018-04-10 08:53:43 +02:00
Angus Gratton
da27816314 Merge branch 'feat/add_efuse_cpu_freq_rating' into 'master'
efuse/add cpu freq rating

See merge request idf/esp-idf!1994
2018-03-29 05:59:52 +08:00
Liu Zhi Fu
072b353b45 bootloader: force SDIO 1.9V if flash is 80M
If the SPI flash frequency is 80M, the voltage of SDIO is 1.9V,
otherwise, it can configured to 1.8V or 1.9V via menuconfig.
2018-03-19 16:39:54 +08:00
Darian Leung
8b1277c55f efuse/add cpu freq rating
This commit adds support for CPU max freqeuency rating
bits in CPU. Bootloader will now print an error if attempting
to 160MHz rated ESP32 at 240MHz.

EFUSE_CHIP_VER_RESERVE has been replaced by the
frequency rating bits. Dependancies on EFUSE_CHIP_VER_RESERVE
have been changed to use EFUSE_CHIP_VER_PKG
2018-03-07 12:16:51 +08:00
Angus Gratton
c69af42b96 esp32: Fix backwards compatibility for pre-v2.1 bootloaders
Older bootloaders don't set RTC_XTAL_FREQ_REG or call rtc_clk_init(),
app needs to pick this up.

Reported at
https://esp32.com/viewtopic.php?f=2&t=3939&p=17836
2017-12-18 13:45:57 +11:00
Ivan Grokhotkov
bad8d3ce57 bootloader: don't log anything before uart_console_configure is called 2017-12-08 13:15:40 +08:00
Angus Gratton
fccc30d2d5 bootloader: Only apply VDDSDIO 1.8V->1.9V if regulator is enabled
Fixes bug if regulator is disabled via efuse.
2017-11-27 10:33:41 +11:00
Ivan Grokhotkov
afa9a85396 bootloader: wait for UART FIFO to be empty before switching frequency 2017-11-09 13:17:58 +08:00
Wangjialin
d034bc9ca0 bootloader: add configuration of flash pins and VDDIO boost 2017-11-03 16:29:56 +08:00
Ivan Grokhotkov
5a88f90a33 soc/rtc: warn if detected XTAL frequency does not match configured one
Since 9a8c0392, XTAL frequency is set to 40MHz by default, and users
of 26MHz boards need to select 26MHz manually. Most users are not aware
of this change, and existing getting started guides do not mention that
XTAL frequency needs to be set for some boards. So users are left with
garbage output from UART without any clue what to check.

This change adds a warning in case specific XTAL frequency was set, and
it does not match automatically detected one. This should help users
fix the issue.
2017-09-11 11:42:26 +08:00
Angus Gratton
11a87ca811 Merge branch 'bugfix/bootloader_ota_sel' into 'master'
Fix bootloader OTA regression

See merge request !1205
2017-09-05 07:25:08 +08:00
Angus Gratton
1cd2ce2471 bootloader: Fix regression preventing OTA updates
Regression introduced in 43e231c.

Thanks to @yanbe for pointing out issue in https://github.com/espressif/esp-idf/pull/955

This is a different fix, tries to keep the behaviour that 43e231c was aiming to correct (unnecessarily testing an
invalid slot more than once.)
2017-09-04 17:37:28 +10:00
Jeroen Domburg
34372a091c Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
Jeroen Domburg
518edac42f Add GD chip into qio data, so (at least my) ESP-WROVER uses QIO mode succesfully. 2017-09-01 16:53:05 +08:00
Angus Gratton
43e231c916 bootloader: Don't unnecessarily test OTA app slots more than once per boot
Would loop more than once through each OTA possibility, but really only
needs to try each slot once.
2017-08-23 11:19:42 +10:00
Angus Gratton
5eef5e7a5d bootloader: Fallback if OTA data is invalid
Make bootloader more robust if either OTA data or some OTA app slots are corrupt.
2017-08-15 09:42:19 +10:00
Ivan Grokhotkov
967611cfaa Revert "bootloader: Add option to build with Link Time Optimisation enabled"
This reverts commit d1b66a08c1.
2017-07-24 05:14:31 +08:00
Angus Gratton
871ba41a09 bootloader: Remove unnecessary KEEP on data/bss sections, save static RAM 2017-07-19 18:31:59 +10:00
Angus Gratton
d1b66a08c1 bootloader: Add option to build with Link Time Optimisation enabled 2017-07-19 18:31:59 +10:00
Angus Gratton
17adb40ca8 bootloader: Calculate SHA256 hash of image on every boot
Makes app image booting more reliable (256-bit rather than 8-bit verification.)

Some measurements, time to boot a 655KB app.bin file and run to app_main() execution.

(All for rev 1 silicon, ie no 340ms spurious WDT delay.)

80MHz QIO mode:
before = 300ms
after = 140ms

40MHz DIO mode:
before = 712ms
after = 577ms

40MHz DIO mode, secure boot enabled
before = 1380ms
after = 934ms

(Secure boot involves two ECC signature verifications (partition table, app) that take approx 300ms each with 80MHz CPU.)
2017-07-19 18:31:59 +10:00
Angus Gratton
0c8888d68f bootloader: Combine loading from flash & verifying to save boot time
Still needs updating to account for secure boot.
2017-07-19 18:25:17 +10:00
Angus Gratton
ec64fa3416 bootloader flash QIO mode: Restore DIO/DOUT mode if enabling quad fails
Previously, flash was degraded to single I/O mode.
2017-07-19 15:04:09 +10:00
Angus Gratton
0715d1f8c1 bootloader: When customising SPI flash pins in efuse, set WP pin in menuconfig
Allows custom configurations for QIO/QOUT mode.
2017-07-19 15:04:08 +10:00
Angus Gratton
d664e32394 build system: Use component.mk for all components, refactor bootloader build
For config-only components, component.mk should now contain "COMPONENT_CONFIG_ONLY := 1"

Also refactored some of the generation of linker paths, library list. This required cleaning up the way the bootloader
project works, it's now mostly independent from the parent.
2017-07-19 09:10:48 +10:00