Commit graph

196 commits

Author SHA1 Message Date
negativekelvin
8e2856b83d soc: fix CPU frequency not updated in rtc_clk_init
Add missing call to rtc_clk_cpu_freq_set_config

Merges https://github.com/espressif/esp-idf/pull/2398
2018-09-12 21:13:42 +08:00
Renz Christian Bagaporo
d9939cedd9 cmake: make main a component again 2018-09-11 09:44:12 +08:00
Angus Gratton
cff2ef695a Merge branch 'master' into feature/cmake 2018-09-06 20:23:04 +08:00
Angus Gratton
b355854d4d Merge branch 'master' into feature/cmake 2018-09-05 10:35:04 +08:00
Konstantin Kondrashov
38098b713f esp32/sleep: Add a function to disable logging from ROM code 2018-09-04 16:03:18 +08:00
Konstantin Kondrashov
9c715d7946 bootloader_support: Fix enable rtc_wdt for resolve issue with varying supply
Eliminates the issue with the lock up in the bootloader due to a power drawdown during its operation.

Closes https://github.com/espressif/esp-idf/issues/1814
2018-09-03 05:43:01 +00:00
Angus Gratton
5fbfd20f10 Merge branch 'master' into feature/cmake 2018-08-30 18:52:31 +08:00
Angus Gratton
a9c4ed7139 Merge branch 'master' into feature/cmake 2018-08-30 18:51:01 +08:00
Ivan Grokhotkov
78fab8a0f9 sdmmc: implement partial DDR support
Works for 3.3V eMMC in 4 line mode.
Not implemented:
- DDR mode for SD cards (UHS-I) also need voltage to be switched to 1.8V.
- 8-line DDR mode for eMMC to be implemented later.
2018-08-30 13:11:54 +08:00
Mahavir Jain
f0fa66a50e rtc_wdt: fix overflow issue with setting wdt interval
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-08-24 18:06:39 +05:30
Ivan Grokhotkov
88d40e01b4 Merge branch 'feature/rtc_slowclk_extra_options' into 'master'
Add more RTC_SLOW_CLK options

See merge request idf/esp-idf!2984
2018-08-23 11:27:14 +08:00
Ivan Grokhotkov
902344c516 Merge branch 'bugfix/trace_mem_layout_pro_cpu' into 'master'
soc: fix trace memory region for single core mode

See merge request idf/esp-idf!3029
2018-08-22 16:51:43 +08:00
Ivan Grokhotkov
5bf3654637 soc/rtc: Force power on 8M clock if it is used to derive RTC slow clock 2018-08-22 11:33:20 +08:00
Ivan Grokhotkov
8365f0f5d2 soc/rtc: add support for external 32k oscillator
Compared to external 32k XTAL, when active oscillator is used as input,
some parameters need to be set differently.
2018-08-22 11:33:20 +08:00
Ivan Grokhotkov
90f5456dba Merge branch 'feature/rtc_cpu_freq_config' into 'master'
soc/rtc: Refactoring, support CPU frequencies lower than XTAL

See merge request idf/esp-idf!2856
2018-08-22 11:32:08 +08:00
Ivan Grokhotkov
e59571eece soc/rtc_clk: reduce data size by disabling CSWTCH generation
Saves about 200 bytes of DRAM at the expense of 4 bytes in IRAM.
2018-08-21 13:02:46 +08:00
Ivan Grokhotkov
db2f0f45be soc/rtc_clk: split rtc_clk_init into separate object file
rtc_clk_init and related functions don’t need to be in IRAM/DRAM.
2018-08-21 13:02:46 +08:00
Ivan Grokhotkov
bcf79e5cf2 tests: use new CPU frequency setting API 2018-08-21 13:02:46 +08:00
Ivan Grokhotkov
bec70ce298 esp32: use new CPU frequency setting API 2018-08-21 13:02:46 +08:00
Ivan Grokhotkov
2e31cce390 soc/rtc: CPU frequency settings refactoring
Previous APIs used to set CPU frequency used CPU frequencies listed in
rtc_cpu_freq_t enumeration. This was problematic for two reasons.
First, supporting many possible frequency values obtained by dividing
XTAL frequency was hard, as every value would have to be listed in
the enumeration. Since different base XTAL frequencies are supported,
this further complicated things, since not all of these divided
frequencies would be valid for any given XTAL frequency. Second,
having to deal with enumeration values often involved switch
statements to convert between enumeration and MHz values, handle
PLL/XTAL frequencies separately, etc.

This change introduces rtc_cpu_freq_config_t structure, which contains
CPU frequency (in MHz) and information on how this frequency has to
be generated: clock source (XTAL/PLL), source frequency, clock
divider value. More fields can be added to this structure in the
future. This structure simplifies many parts of the code, since both
frequency value and frequency generation settings can be accessed in
any place in code without the need for conversions.

Additionally, this change adds setting of REF_TICK dividers to support
frequencies lower then XTAL with DFS.
2018-08-21 13:02:03 +08:00
Jiang Jiang Jian
00ef8bf726 Merge branch 'feature/decrease_bt_contrller_memory_with_new_mem_reserved' into 'master'
decrease bt contrller memory with new mem reserved

See merge request idf/esp-idf!2791
2018-08-16 19:12:44 +08:00
Angus Gratton
ff2404a272 Merge branch 'master' into feature/cmake 2018-08-16 17:14:17 +10:00
Mahavir Jain
0075e2f316 soc: fix trace memory region for single core mode
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-08-15 20:52:39 +05:30
Konstantin Kondrashov
a8e46775c6 soc/rtc_wdt: Add API functions for rtc_wdt
Added functions:
rtc_wdt_protect_off/on
rtc_wdt_set_length_of_reset_signal
rtc_wdt_set_stage
rtc_wdt_set_time
rtc_wdt_feed
rtc_wdt_disable/enable
2018-08-14 17:48:02 +05:00
Tian Hao
ee787085f9 component/bt : decrease memory consumption by conn number
1. BLE only with 9(max) connection will decrease 3K DRAM
2. BR/EDR only with 7(max) connection will decrease 16K DRAM
3. Any of BLE or BR/EDR connection number decrease will also decrease DRAM consumption
4. Decrease one BLE connection will save about 1KB DRAM
5. Decrease one BR/EDR ACL connection will save about 1.2KB DRAM
6. Decrease one BR/EDR SCO/eSCO will save 2KB DRAM.
7. fix some definition and kconfig
8. remove 1.2k of vhci tx cache and make .bss & .data to heap about 1.4K
9. modify BT Reserved Memory size and modify example to support new bt kconfig
2018-08-14 02:29:17 +00:00
Ivan Grokhotkov
8739111218 Merge branch 'bugfix/gpio_reset_bitmask' into 'master'
gpio: Bitmask overflow fix in gpio_reset_pin

See merge request idf/esp-idf!2966
2018-08-10 17:35:26 +08:00
Taavi Hein
f7749e18a8 gpio: Bitmask overflow fix in gpio_reset_pin
For pins 32 and up the BIT(nr) macro used here overflowed,
causing undetermined GPIO pins to be reset.
Example: freeing SPI device/bus where CS is on pin 33
caused debug UART to cease communication, TXD0 was
disabled.

Fixed as BIT64(nr) macro, to be used elsewhere as needed.
For example in definitions like GPIO_SEL_32..GPIO_SEL_39.
2018-08-08 15:31:17 +03:00
Angus Gratton
a5ae5ac4b3 soc: Allow components to reserve fixed memory ranges that they need
No longer necessary to keep all reserved addresses in 'soc'.

Means 'soc' does not need to know about 'bt', for example.

Also means that Bluetooth can be enabled in config without any memory being reserved for BT
controller. Only if code calling the BT controller is linked in, will this memory be reserved...
2018-08-06 01:37:55 +00:00
David Cermak
409c91bcb9 removed possible uint16 access to 32bit register, noted fifo use not recommended 2018-07-23 07:57:18 +02:00
Ivan Grokhotkov
fec079cd44 Merge branch 'bugfix/rtc_io_hold_regs' into 'master'
Fix errors in rtc_gpio_desc values

See merge request idf/esp-idf!2765
2018-07-19 15:04:42 +08:00
Ivan Grokhotkov
5376a06d7b Merge branch 'bugfix/range_CONFIG_ESP32_RTC_CLK_CAL_CYCLES' into 'master'
soc/clk: Fix range CONFIG_ESP32_RTC_CLK_CAL_CYCLES

See merge request idf/esp-idf!2719
2018-07-17 19:43:11 +08:00
negativekelvin
8a9e3875ed
Fix errors in rtc_gpio_desc values 2018-07-12 23:16:15 -07:00
Angus Gratton
a67d5d89e0 Replace all DOS line endings with Unix
Command run was:
git ls-tree -r HEAD --name-only | xargs dos2unix
2018-07-12 19:10:37 +08:00
Konstantin Kondrashov
ac3508615a soc/clk: Fix range CONFIG_ESP32_RTC_CLK_CAL_CYCLES
Fixed the error division on zero.
Also fixed range CONFIG_ESP32_RTC_CLK_CAL_CYCLES in Kconfig.
Fixed a overflow error by TIMG in the function rtc_clk_cal_internal. This error was due to a limit in values TIMG_RTC_CALI_MAX=0x7FFF (to write the slowclk_cycles) and TIMG_RTC_CALI_VALUE=0x1FFFFFF (to read xtal_cycles). Added assert finctions.

Closes https://github.com/espressif/esp-idf/issues/2147
2018-07-10 11:56:12 +05:00
Darian Leung
1d2727f4c8 CAN Driver
The following commit contains the first version of the ESP32 CAN Driver.

closes #544
2018-07-04 14:01:57 +08:00
Konstantin Kondrashov
32da455384 soc: Fix check_long_hold_gpio and move def to soc
Fix factory_reset_pin init as input
Move definition a structure rtc_gpio_desc to soc

Closes https://github.com/espressif/esp-idf/issues/2030
2018-06-22 09:20:27 +05:00
Ivan Grokhotkov
4b91c82cc4 Merge branch 'feat/sdio_pullup' into 'master'
feature(sdio): add features to make SDIO slave compatible with more devkits

See merge request idf/esp-idf!2454
2018-06-20 13:58:56 +08:00
michael
5b37a96ddc feature(sdio): allow to enable internal pullups of the SDIO host and slave as a debug feature
NOTE: the internal pullups are not totally reliable, please do add external pullups on your bus.
2018-06-14 12:04:22 +08:00
Michael (XIAO Xufeng)
ebfda40b7c refactor(spi): move pin information into soc folder 2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
939e5693a5 chore(spi): fix the terms of native to iomux 2018-06-06 06:08:39 +00:00
michael
5cf7d3768d feat(spi_master): fine tune the timing of SPI 2018-06-06 06:08:39 +00:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Angus Gratton
3e1a93e5a7 soc: rtc_vddsdio_get_config() In default configuration, VDD_SDIO LDO is always enabled
When using bootstrapping pin to enable VDD_SDIO, the internal LDO is always enabled at either 1.8V
or 3.3V.
2018-05-25 15:14:13 +10:00
Angus Gratton
d775cc4c4c soc: Fix description of rtc_config_t.tieh, add macros
Usage of TIEH was correct but description had 1.8V & 3.3V backwards.

Add macro definitions for TIEH values to improve readability.
2018-05-25 14:58:37 +10:00
Angus Gratton
b8312a26c0 Merge branch 'feature/sdio_slave' into 'master'
feature(sdio_slave): add support for sdio_slave

See merge request idf/esp-idf!1829
2018-05-22 09:43:35 +08:00
Konstantin Kondrashov
e5b280f173 dport: Bigfix dport_read code move to IRAM
A new method of workaround an error with DPORT is to ensure that the APB is read and followed by the DPORT register without interruptions and pauses. This fix places this implementation in the IRAM to exclude errors associated with the cache miss.
2018-05-21 22:00:51 +05:00
Michael (XIAO Xufeng)
c73575de4f feat(sdio_slave): add headers for sdio slave components: slc, host, hinf 2018-05-21 23:48:33 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
Angus Gratton
7ae1e9463e Merge branch 'bugfix/rtc_xtal_tests' into 'master'
ci: Only run XTAL unit tests assuming board has an XTAL

See merge request idf/esp-idf!2401
2018-05-15 18:44:46 +08:00
Angus Gratton
05e09a5bac ci: Only run XTAL unit tests assuming board has an XTAL, run less repeats 2018-05-15 15:43:24 +08:00