Commit graph

569 commits

Author SHA1 Message Date
XiaXiaotian
e444a31e79 esp32: fix invalid channel state information(CSI) data index
Due to a hardware limitation in ESP32, the first four bytes of some
    CSI data is invalid, not the last four bytes.

    Correct a mistake of CSI sub-carrier index in documentation.
2019-01-22 20:43:36 +08:00
wangmengyang
1c4bbaa567 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-14 21:21:22 +08:00
Ivan Grokhotkov
2aa9a21180 Merge branch 'bugfix/fix_psram_eid_v3.1' into 'release/v3.1'
psram: fix psram eid (backport v3.1)

See merge request idf/esp-idf!3467
2018-11-01 22:15:04 +08:00
Ivan Grokhotkov
acdc7b0511 Merge branch 'bugfix/workaround_free_peripherals_isr_when_using_dual_core_v3.1' into 'release/v3.1'
driver(interrupt): fix the issue that interrupt might be allocated and freed on different core for release/v3.1

See merge request idf/esp-idf!3436
2018-11-01 22:14:52 +08:00
Liu Zhi Fu
f97e2d3bde Bugfix/tw26696 fix wifi timer v3.1 (backport v3.1) 2018-10-17 17:30:46 +08:00
Ivan Grokhotkov
93f04b87b2 Merge branch 'bugfix/fix_random_failure_with_ota_updates_v3.1' into 'release/v3.1'
app_update: fix intermittent failure with firmware updates (backport v3.1)

See merge request idf/esp-idf!3419
2018-10-16 10:58:24 +08:00
chenjianqiang
64b41b5602 bugfix(psram): fix psram driver
1. remove use EID to distinguish psram voltage
2. 1V8 64Mbit psram and 3V3 64Mbit psram use the same psram driver(standard spi interface)
3. set cs hold time register as 1
2018-10-11 12:22:34 +08:00
Wangjialin
b26b1389de feature(psram): add support for 64MBit psram of 1.8v and 3.3v.
1. Add reading psram EID.
2. Configure different clock mode for different EID.
3. add API to get psram size and voltage.
4. Remove unnecessary VSPI claim.

For 32MBit@1.8V and 64MBit@3.3V psram, there should be 2 extra clock cycles after CS get high level.
For 64MBit@1.8 psram, we can just use standard SPI protocol to drive the psram. We also need to increase the HOLD time for CS in this case.

EID for psram:
32MBit 1.8v: 0x20
64MBit 1.8v: 0x26
64MBit 3.3v: 0x46
2018-10-11 12:21:31 +08:00
kooho
fb30315d01 driver(interrupt): fix the issue that interrupt might be allocated and freed on different cores for release/v3.1 2018-10-10 19:22:34 +08:00
Mahavir Jain
bbad487deb app_update: fix intermittent failure with firmware updates
Routine `spi_flash_cache2phys` sometimes return incorrect value,
resulting in failure in getting currently running ota partition.
This in turn aborts firmware update process.This issue was more
prominent with SPIRAM enabled cases.

Fix ensures proper cache guards during `spi_flash_cache2phys`, and
also for few other similar APIs.

In addition, `esp_ota_get_running_partition` has also been optimized
to save currently running partition for subsequent invocations.

Fixes https://github.com/espressif/esp-idf/issues/2451
2018-10-08 03:18:37 +00:00
Sagar Bijwe
68a9d1168f nvs_flash: Add support for nvs encryption 2018-10-04 19:25:12 +05:30
qiyueixa
1d4ae1e9ad mesh: bugfix
1. suppport mesh type, mesh ID, router and IE crypt func&key at any time after mesh is initalized.
2. support modify parent at any time after mesh is configured.
3. modify manual networking example.
4. update header file.
5. fix issues in root conflicts handling.
6. add max length of beacon to menuconfig.
7. fix issue when received a beacon without DSSS.
2018-09-25 13:43:55 +08:00
XiaXiaotian
738afe2de3 esp32: backport several WiFi bug fixes to v3.1
Backport following WiFi fixes to v3.1:
1. Fix AMPDU RX sequence compitability bug
2. Optimize scan capability in all channel scan
3. Fix some modem sleep bugs
4. Update API to set CSI channel filter and HT_LTF data generating
2018-09-17 14:40:24 +08:00
Jiang Jiang Jian
969161183a Merge branch 'bugfix/esp_wifi_disconnect_fail_v3.1' into 'release/v3.1'
update wifi lib to fix two bugs (backport v3.1)

See merge request idf/esp-idf!3158
2018-09-04 15:06:49 +08:00
Darian Leung
27ffeacf07 docs/rewrite_mesh_docs
The following commit rewrites the ESP-MESH docs. This commit includes
new diagrams and a structure approach to the mesh docs. Some mesh api references
have also been modified.
2018-09-03 13:03:32 +08:00
zhangyanjiao
ec3a1318dc update wifi lib to fix two bugs
1. fix the esp_wifi_disconnect() err when wifi is not started or inited

2. make g_intr_lock_mux and g_osi_funs_p in DRAM
2018-08-31 20:10:20 +08:00
qiyuexia
09f5854c9a mesh: bugfix and add two APIs
1. new APIs: esp_mesh_get_subnet_nodes_num() and esp_mesh_get_subnet_nodes_list().
2. fix hard to find the parent during connect.
3. disable Wi-Fi channel switch function.
4. fix a typo of MESH_EVENT_NO_PARENT_FOUND.
2018-08-29 17:28:17 +08:00
Liu Zhi Fu
3d2cd911f0 esp32: update wifi lib to fix several WiFi bugs
Fix following WiFi bugs:
1. Shouldn't scan when connect
2. Check beacon length in modem sleep
3. Fix the bug that AP may deauth wrong station when inactivity timer expires
4. Fix the bug that WiFi assert the system when receiving empty MCS in association response frame
2018-08-26 13:15:53 +08:00
qiyuexia
d421663d3f mesh: modify parent switch mechanism
1. modify parent switch mechanism.
2. fix non-root doesn't clear the layer value in nvs.
3. fix retransmit the remove announcement packets.
4. add API esp_mesh_flush_upstream_packets().
5. automatically adjust passsive scan time based on the change of beacon interval.
2018-08-10 11:45:11 +08:00
Jiang Jiang Jian
8a6c1df041 esp32: backport several WiFi bug fixes to v3.1
Backport following bug fixes to v3.1:

1. Bug fix of may connect to wrong AP in all channel scan

2. Station state machine change and fix ap loss

3. Add compatible to ccmp encryption

4. Update libphy.a to v3960:
   4.1 Decrease  phy_init time from 900us to 347us in sleep wakeup
   4.2 Fix RX STBC initialization
   4.3 Modify set_chan function to fix interrupt watchdog issue

5. Fix several wpa2 enterprise issues
   5.1 Fix heap corrupted bug
   5.2 Fix memory leak bug
   5.3 Make wpa2 enterprise thread-safe
   Closes https://github.com/espressif/esp-idf/issues/1569

6. Bugfix of coex wifi pm
2018-08-09 13:24:16 +00:00
Jiang Jiang Jian
c209efa4e2 Merge branch 'doc/wifi_update_channel_state_information_document_v3.1' into 'release/v3.1'
docs: update channel state information document (backport v3.1)

See merge request idf/esp-idf!2796
2018-08-01 14:49:45 +08:00
XiaXiaotian
bd768edca2 check WiFi library git commit id in unit test 2018-07-23 20:03:43 +08:00
XiaXiaotian
f4c57eb764 docs: update channel state information document
1. Move channel to the first row of the table.

    2. Remove the condition of HT20/HT40 for they are determined by
    secondary channel.

    3. Clean up the CSI table.
2018-07-17 15:01:12 +08:00
Alexey Gerenkov
af2a6ee826 gcc8_newlib3: Compilation warnings and errors not specific to newlib v3 2018-07-16 14:19:57 +08:00
Ivan Grokhotkov
ed27e75f50 Merge branch 'bugfix/xthal_get_interrupt_volatile_v3.1' into 'release/v3.1'
xtensa: make XTHAL_GET_INTERRUPT, XTHAL_GET_CCOUNT volatile (backport v3.1)

See merge request idf/esp-idf!2712
2018-07-12 17:18:06 +08:00
Ivan Grokhotkov
d128ff3ecd xtensa: make XTHAL_GET_INTERRUPT, XTHAL_GET_CCOUNT volatile
INTERRUPT and CCOUNT registers will change outside of program control.
Making the inline assembly used to read these registers volatile
indicates this fact to the compiler.

Fixes https://github.com/espressif/esp-idf/issues/2127
2018-07-05 17:21:55 +08:00
Xia Xiaotian
fffbcbb78b esp32: Change channel state information(CSI) data type from unsigned char to singed char 2018-07-04 11:47:57 +08:00
Tian Hao
3ad712ba86 esp32: fix coex bug
1. fix BLE connection missing in coex mode
    2. modify other parameters to make coex priority more reasonable
    3. fix modem sleep procedure trap cause Wifi disable RF when BT is
    working. Such cause that BR/EDR is difficult to be connected, BLE
    connection stability decrease and so on.
    4. modify BR/EDR coexist duration to imrove BR/EDR connect success
    ratio.
    5. Due to the hardware coexist bug, BLE scan interval/window should
    be less than 0x100(about 160ms). Therefore, it will cause BLE cannot
    scan any advertising packet while WiFi have higher priority
    behaviour(such like RX beacon, scan, TX/RX VO packets and etc.).
2018-06-30 22:40:09 +08:00
Jiang Jiang Jian
07b1e2053c Merge branch 'mesh/update_libs_v3.1' into 'release/v3.1'
mesh: update libs(backport3.1)

See merge request idf/esp-idf!2630
2018-06-28 16:09:29 +08:00
qiyueixa
3c4c838c2b mesh: update libs
1. add APIs to set/get announce interval values.
2. add API to enable/disable the min rate to 6Mbps for data packages.
3. add APIs to set/get RSSI threshold values.
4. fix ap_loss.
2018-06-26 21:49:23 +08:00
Konstantin Kondrashov
baa6c19700 soc: Fix check_long_hold_gpio and move def to soc
Fix factory_reset_pin init as input
Move definition a structure rtc_gpio_desc to soc

Closes https://github.com/espressif/esp-idf/issues/2030
2018-06-26 12:47:55 +05:00
XiaXiaotian
7634d9a991 support WiFi null mode again 2018-06-21 21:45:57 +08:00
Angus Gratton
c1fdd45001 Merge branch 'bugfix/fix_touch_pad_can_not_wake_up' into 'master'
bugfix(touch pad): modify deep-sleep example and add note for sleep api

See merge request idf/esp-idf!2553
2018-06-20 11:51:46 +08:00
fuzhibo
9a0d57b90b bugfix(touch pad): modify deep-sleep example and add note for sleep api.
Closes https://github.com/espressif/esp-idf/issues/2052
2018-06-20 10:57:26 +08:00
Angus Gratton
43b6c76bba Merge branch 'feature/expansion_space_for_bootloader' into 'master'
partition_table: Moving to custom offset

See merge request idf/esp-idf!2263
2018-06-18 12:34:53 +08:00
qiyueixa
0dd750af1a mesh: update mesh libs
1. rename example internal_transceiver to internal_communication
2. bugfix
3. Closes https://github.com/espressif/esp-idf/issues/2014
2018-06-15 20:34:49 +08:00
Ivan Grokhotkov
d9f8311b9d docs: add error codes reference 2018-06-15 15:49:24 +08:00
Xia Xiaotian
6e9070b6d9 correct modem sleep API description 2018-06-13 15:44:59 +08:00
Konstantin Kondrashov
3e0ac4db79 partition_table: Expanding the space under the bootloader
Allows you to move the partition table, it gives more space for the bootloader.
Added a new utility - parttool.py. This utility can search for the offset and/or size of the partitions by name and type/subtype. Use for getting APP_OFFSET and PHY_DATA_OFFSET.
The linker(esp32.bootloader.ld) made changes that allow you to write a custom bootloader code more.

TW14125
2018-06-08 18:47:29 +05:00
Ivan Grokhotkov
03d78e7afb Merge branch 'feature/Add_noinit_rtc_noinit_sections' into 'master'
esp32: Add .noinit and .rtc_noinit sections to the linker script

See merge request idf/esp-idf!1996
2018-06-08 16:01:30 +08:00
Jiang Jiang Jian
8a4c9d7dfb Merge branch 'doc/wifi_channel_state_information' into 'master'
add document of channel state information

See merge request idf/esp-idf!2468
2018-06-04 17:59:05 +08:00
Xia Xiaotian
7d5ef3c765 add document of channel state information 2018-06-01 15:45:00 +08:00
Liu Zhi Fu
4afa5d0d29 esp32/wpa_supplicant: fix some bugs introduced by wifi os adapter
1. Fix the WiFi/BT coexist bug
2. Fix WPA2 enterprise example crash bug
3. Add size and version check for crypto type struct
4. Add MD5 check for crypto type header file
2018-05-31 17:09:40 +08:00
Ivan Grokhotkov
834c056234 xtensa: remove unused header files 2018-05-31 02:21:36 +00:00
Ivan Grokhotkov
cb649e452f remove executable permission from source files 2018-05-29 20:07:45 +08:00
XiaXiaotian
b32b93a607 Add OS adapter to WiFi driver
1.add os adapter to wifi driver
2.type of encrypt funcs not correct
2018-05-26 17:22:23 +08:00
qiyueixa
feaa6e8a8f mesh: add manual networking function
1. add mesh_assoc_t to esp_mesh_internal.h file.
2. rename "node" to "device" in esp_mesh.h.
3. add MESH_EVENT_SCAN_DONE event.
4. add APIs esp_mesh_scan_get_ap_record() and esp_mesh_scan_get_ap_ie_len() to get scan results.
5. modify API esp_mesh_set_self_organized() by adding parameter "select_parent".
6. modify API esp_mesh_set_parent() by adding parameter "parent_mesh_id"
7. add manual networking example.
2018-05-23 18:09:12 +08:00
Jiang Jiang Jian
f453877759 Merge branch 'feature/multi_antenna_v3.1' into 'master'
esp32: add multiple antenna

See merge request idf/esp-idf!2400
2018-05-22 23:04:01 +08:00
Liu Zhi Fu
04c74efedd esp32: add multiple antenna
1. Support multiple antenna support
2. libphy.a is updated to v3910
2018-05-22 22:28:00 +08:00
Liu Zhi Fu
67424816cc esp32: some changes relating to phy v3900
1. Store the calibration data to NVS if PHY does full calibration because of calibration data checksum failure
2. Pass the station's mac to PHY for checksum calculation
2018-05-22 14:16:09 +08:00