Commit graph

6335 commits

Author SHA1 Message Date
Ivan Grokhotkov
05a0fbd49b soc/rtc: add a function to wait for slow clock cycle
Some RTC features are synchronized to RTC_SLOW_CLK, so sometimes
software needs to wait for the next slow clock cycle.
This function implements waiting using Timer Group clock calibration
feature.
2017-10-26 19:53:53 +08:00
Andreas Pokorny
2a1906cf50 Ensure that C++ and C compilers get the same preprocessor setup
CPPFLAGS is applied for both languages while CFLAGS only for C

Signed-off-by: Andreas Pokorny <andreas.pokorny@siemens.com>
2017-10-26 13:04:41 +02:00
Angus Gratton
9159e2b807 Merge branch 'bugfix/panic_handler_debugexception' into 'master'
panic handler: Print correct PC & backtrace for debug exceptions

See merge request !1441
2017-10-26 15:49:30 +08:00
Angus Gratton
f5b3a370cd Merge branch 'feature/adc2_driver' into 'master'
feature(adc2): add support to use ADC2 when WIFI is disabled

See merge request !1237
2017-10-26 15:48:48 +08:00
Angus Gratton
baf1641c29 Merge branch 'bugfix/uart_set_default_idle_time_to_zero' into 'master'
bugfix(uart): set default tx idle num

See merge request !1419
2017-10-26 15:17:45 +08:00
Angus Gratton
5c5d5f0acb Merge branch 'bugfix/tcpip_stack_overflow_logging_printf' into 'master'
lwip: Increase minimum TCP/IP task stack size if log level is Debug or Verbose

See merge request !1396
2017-10-26 15:09:22 +08:00
michael
87f2b27dc4 refactor(rtc): re-organize code in rtc_module.c 2017-10-26 14:35:30 +08:00
michael
d30f3e7aa8 example(adc2): add example and test case for adc2.
closes #461
2017-10-26 14:35:30 +08:00
esp32de
7c0020bfd0 feat(adc2): append adc2 support and api and the lock with WIFI module
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Kedar Sovani
07992b08e8 [pthread] Perform init_routine execution outside of the mutex
The mutex is common across all the threads. It needn't be held across
the init_routine() call as long as the 'once' behaviour is guaranteed

Saw a deadlock case, where init_routine of one thread was waiting for
the completion of init_routine in another thread.

t2: wait for command
t1: pthread_once:
         lock once_mux
         init_routine:
               inform thread t2
               wait for signal from t2
t2: received command
         pthread_once
             lock once_mux (already held by t1)
---- Deadlock ----
2017-10-25 13:57:39 +05:30
Jiang Jiang Jian
2765514314 Merge branch 'bugfix/btdm_fix_bonded_public_scan_issue' into 'master'
component/bt: Fix scan problem of bonded device using public address

See merge request !1305
2017-10-25 14:11:56 +08:00
Wangjialin
303b9f60db bugfix(uart): set default tx idle num
Reported from:
https://github.com/espressif/esp-idf/issues/703
https://github.com/espressif/esp-idf/issues/917
In uart driver we didn't change the default value of tx idle num, so there would be a delay after tx FIFO is empty.

1. Add API to set tx idle interval before next data transmission. (The UART hardware can add an interval after tx FIFO is empty).
2. Set default tx idle interval to zero.
3. Add hardware disable in uart driver delete function.
2017-10-25 13:29:02 +08:00
baohongde
3dab0fd340 component/bt: Fix bug of set MAX_L2CAP_CHANNELS error 2017-10-25 12:02:41 +08:00
island
4e7de126dc component/bt: Fix scan problem of bonded device using public address 2017-10-25 11:52:03 +08:00
Tian Hao
85eb5d4374 component/bt : fix bug of sw interrupt cause to run btdm to different cpu core.
1. add sw interrupt cause osi to controller.
2. modify the kconfig to improve the option view.
3. add option of the cpu core which bluedroid run.
4. add option of the cpu core which bluetooth controller run.
2017-10-24 16:13:58 +08:00
wangmengyang
837678e4f3 component/bt: disable the use of ROLE_SWITCH feature for classic BT as workaround 2017-10-24 14:44:53 +08:00
michael
a6ac5b33c9 feat(rtc): open adc*(dac)_pad_get_io_num functions to public. 2017-10-24 12:06:14 +08:00
michael
cff8d30c25 refactor(rtc): change register writing from macros to structures in *_struct.h 2017-10-24 12:05:52 +08:00
Angus Gratton
2c95a77cf9 Merge branch 'bugfix/ioctl_declaration' into 'master'
add missing ioctl declaration

See merge request !1442
2017-10-24 10:02:51 +08:00
zhangyanjiao
18dcbfa1e2 fix tcp crash 2017-10-24 09:44:44 +08:00
Ivan Grokhotkov
552ba35da5 add missing ioctl declaration
Previously ioctl was declared as a macro in lwip/sockets.h.
Disabling LWIP_POSIX_SOCKETS_IO_NAMES removed that declaration.

This adds sys/ioctl.h file and the missing declaration.
Also adds missing includes in vfs.c.
2017-10-23 19:47:33 +08:00
Yulong
a1495b0e49 Squash the two submissions of previous.
component/bt: The application layer does not allocate memory correctly causing the btc layer pointer to cross the border.

bt/examples: Change the gattc_multi_connect.c incorrect memory apply method.
2017-10-23 05:24:02 -04:00
Angus Gratton
2c2e7f6303 Merge branch 'bugfix/optmize_ipv6_event' into 'master'
bugfix: add netif info in event message when got ipv6 address

See merge request !959
2017-10-23 17:00:10 +08:00
Angus Gratton
c61060e673 panic handler: Print correct PC & backtrace for debug exceptions 2017-10-23 15:46:43 +08:00
baohongde
84a55f9ee4 component/bt: Fix bug of function smp_decide_association_model 2017-10-23 15:34:02 +08:00
yulong
a9a423a025 component/bt: Added the sec_act != BTM_BLE_SEC_ENCRYPT check in the btm_ble_set_encryption function when the sec_act is BTM_BLE_SEC_ENCRYPT_NO_MITM or BTM_BLE_SEC_ENCRYPT_MITM. 2017-10-23 15:12:36 +08:00
Yulong
da32fbce7a component/bt: Fix the bug of can't pair if master send pair req but slave don't send sec req. 2017-10-23 15:12:36 +08:00
Ivan Grokhotkov
9274814268 Merge branch 'feature/esp32_pico_kit_v4_getting_started_guide' into 'master'
ESP32-PICO-KIT V4 Getting Started Guide

See merge request !1418
2017-10-23 14:46:04 +08:00
zhiweijian
9ad451dced Component/bt: fix memory leak in bluefi demo 2017-10-23 14:26:11 +08:00
Tian Zhong Xing
55e95b04bd bugfix: add netif info in event message when got ipv6 address 2017-10-23 13:50:43 +08:00
Ivan Grokhotkov
91d9cb98d3 Merge branch 'bugfix/unit_tests_build' into 'master'
spi_flash: fix build error with profiling enabled

See merge request !1437
2017-10-23 12:14:10 +08:00
Angus Gratton
454e47385c Merge branch 'bugfix/select_fdset' into 'master'
LWIP: Fix select() FD_SET/FD_GET/etc

See merge request !1435
2017-10-23 10:55:33 +08:00
Angus Gratton
01befe4d6a Merge branch 'bugfix/i2c_hw_fsm_recover' into 'master'
bugfix(i2c): add I2C hardware reset if the hw FSM get stuck

See merge request !1272
2017-10-23 10:16:02 +08:00
Ivan Grokhotkov
fbd52dcf34 spi_flash: fix build error with profiling enabled 2017-10-22 12:57:56 +08:00
Ivan Grokhotkov
f039aac1e5 Merge branch 'bugfix/i2s_bck_polariy' into 'master'
bugfix(i2s): fix bck polarity issue when using pll clock.

See merge request !1428
2017-10-22 12:36:27 +08:00
Ivan Grokhotkov
000a4f5941 Merge branch 'bugfix/rmt_thresh_check' into 'master'
bugfix(rmt): fix event thresh check issue

See merge request !1423
2017-10-22 12:35:44 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request !1189
2017-10-22 12:34:11 +08:00
krzychb
4d882c1fb7 ESP32-PICO-KIT V4 Getting Started Guide 2017-10-20 22:49:59 +02:00
Wangjialin
ed1e32f583 bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
Reported from different sources from github or bbs:

https://github.com/espressif/esp-idf/issues/680

https://github.com/espressif/esp-idf/issues/922

We tested reading several sensor or other I2C slave devices, if the power and SDA/SCL wires are in proper condition, everything works find with reading the slave.
If we remove the power supply for the slave during I2C is reading, or directly connect SDA or SCL to ground, this would  cause the I2C FSM get stuck in wrong state, all we can do is the reset the I2C hardware in this case.
After this commit, no matter whether the power supply of I2C slave is removed or SDA / SCL are shorted to ground, the driver can recover from wrong state.

We are not sure whether this the save issue with the reported one yet, but to make the driver more robust.

Further information:

1. For I2C master mode, we have tested different situations, e.g., to short the SDA/SCL directly to GND/VCC, to short the SDA to SCL, to un-plug the slave device, to power off the slave device. Under all of those situations, this version of driver can recover and keep working.
2. Some slave device will die by accident and keep the SDA in low level, in this case, master should send several clock to make the slave release the bus.
3. Slave mode of ESP32 might also get in wrong state that held the SDA low, in this case, master device could send a stop signal to make esp32 slave release the bus.

Modifications:

1. Disable I2C_MASTER_TRAN_COMP interrupt to void extra interrupt.
2. Disable un-used timeout interrupt for slave.
3. Add bus reset if error detected for master mode.
4. Add bus clear if SDA level is low when error detected.
5. Modify the argument type of i2c_set_pin.
6. add API to set timeout value
7. add parameter check for timing APIs
2017-10-21 02:10:59 +08:00
Angus Gratton
f76a3c45c0 newlib: Disable sys/types.h implementations of FD_SET, etc.
Temporary measure, until we have VFS-level select() support.

Closes https://github.com/espressif/esp-idf/issues/1141
2017-10-20 18:11:32 +08:00
Angus Gratton
e5ae0f5927 lwip: Make LWIP_SOCKET_OFFSET signed, remove need for underflow check
This reverts commit 541493d877.
2017-10-20 18:04:28 +08:00
Angus Gratton
22756b6c02 Merge branch 'feature/FreeRTOS_Trace_Facilities' into 'master'
feature/make freertos trace facility configurable

See merge request !1420
2017-10-20 16:42:15 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Darian Leung
a6854b72cd freertos/make trace facility configurable
This commit makes configUSE_TRACE_FACILITY and
configUSE_STATS_FORMATTING_FUNCTIONS configurable in kconfig. Test cases fro the
functions enabled by the two configurations above have also been added.

Test cases for the following functions have been added...

- uxTaskGetSystemState()
- uxTaskGetTaskNumber()
- vTaskSetTaskNumber()

- xEventGroupClearBitsFromISR()
- xEventGroupSetBitsFromISR()
- uxEventGroupGetNumber()

- uxQueueGetQueueNumber()
- vQueueSetQueueNumber()
- ucQueueGetQueueType()

Test cases for the following functions were not required...

- prvListTaskWithinSingleList()
- prvWriteNameToBuffer()
- vTaskList()
2017-10-20 15:17:17 +08:00
Angus Gratton
477ed8ce62 Merge branch 'bugfix/touchpad_dac_mismatch_on_tp8_tp9' into 'master'
bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9.

See merge request !1288
2017-10-20 14:18:32 +08:00
Ivan Grokhotkov
dbebece1d2 Merge branch 'feature/unit-test-configs' into 'master'
unit-test-app: add support for testing multiple configurations

See merge request !1249
2017-10-20 14:03:53 +08:00
Angus Gratton
b30c0d1bbb Merge branch 'feature/add_dns_api' into 'master'
tcpip_adapter/lwip: add dns api

See merge request !1405
2017-10-20 11:54:20 +08:00
Angus Gratton
c65b530360 Merge branch 'feature/heap_caps_dump' into 'master'
heap: Add heap_caps_dump() / heap_caps_dump_all() functions

See merge request !1422
2017-10-20 11:52:23 +08:00
Angus Gratton
47aaf402b8 heap: Add heap_caps_dump() / heap_caps_dump_all() functions
Dump the structure of the heap for debugging purposes.
2017-10-20 11:38:24 +08:00
Angus Gratton
b10e1a92b6 freertos: Update comments in "port" section (portMUX/etc)
Some comments had fallen out of date.
2017-10-20 11:17:44 +08:00