Commit graph

107 commits

Author SHA1 Message Date
Ivan Grokhotkov
5425d8569c Merge branch 'feature/pthread_api' into 'master'
esp32: pthread API

See merge request !1146
2017-09-07 17:49:42 +08:00
Alexey Gerenkov
5094965e98 According to comments 2017-09-06 10:30:23 +08:00
Alexey Gerenkov
0b09c7006d pthread: Initial version of thread API 2017-09-06 10:30:23 +08:00
Angus Gratton
5361c08989 heap: Support adding new heap regions at runtime
To facilitate this, the list of registered heap regions is now a linked list
(allowing entries to be appended at runtime.)
2017-09-05 14:07:02 +10:00
Jeroen Domburg
34372a091c Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
Ivan Grokhotkov
f31efb697c newlib: rename esp_setup_time_syscalls to esp_set_time_from_rtc
This function no longer sets up syscalls, and new name reflects its
purpose better.
2017-09-01 10:36:14 +08:00
Ivan Grokhotkov
d4e950d311 Merge branch 'feature/cxx_exceptions' into 'master'
Partial support for C++ exceptions

See merge request !930
2017-09-01 00:27:41 +08:00
Ivan Grokhotkov
547ef83020 Merge branch 'feature/disable_some_perip_clk_when_cpu_start' into 'master'
Disable some peripheral clocks when cpu starts

See merge request !1089
2017-08-30 11:43:38 +08:00
Angus Gratton
1e22bcdfde esp32: Add KConfig option to disable ROM Console fallback on first boot 2017-08-29 14:52:00 +10:00
XiaXiaotian
4776f73ca4 Disable some peripheral clocks when cpu starts
All peripheral clocks are default enabled after chip is powered on.
    When CPU starts, if reset reason is CPU reset, disable those clocks
    that are not enabled before reset. Otherwise, disable all those
    useless clocks.
    These peripheral clocks must be enabled when the peripherals are
    initialized and disabled when they are deinitialized.
2017-08-29 11:18:42 +08:00
Ivan Grokhotkov
857a29872d esp_timer: add high resolution software timer API 2017-08-28 11:35:26 +08:00
Angus Gratton
e50870c2dc Merge branch 'bugfix/bootloader_stack_smash' into 'master'
Fix crashes when >approx 185KB of DRAM is statically allocated

See merge request !983
2017-07-17 14:11:35 +08:00
Angus Gratton
99fe61716c startup: Add assertion checks around various initialisation sequences
These may fail if close to 192KB of static RAM is allocated (remaining early heap RAM is too small.)
2017-07-12 13:06:56 +08:00
Angus Gratton
2b0f623259 bootloader/early boot: Error out if >192KB of static DRAM is allocated (temporary fix)
Currently the last 128KB of DRAM is reserved for the bootloader & early boot stacks. This means if >192KB of static DRAM
is allocated, the only available heap is this region - which is disabled until the scheduler starts. As a result, you
get either heap corruption on early boot if the static data overlaps startup heap (leading to very weird errors), or
FreeRTOS will fail to start when it can't malloc() anything.

Long term fix is to move the stacks & bootloader data to the very end of RAM, and only reserve that part for early
boot. This is a little fiddly because of also wanting to make sure this memory is not preemptively fragmented when it
gets reintroduced to the heap. This will become more important if/when we have more static allocation options in the
future.

For now, these errors make it clear why the boot has failed.

Ref TW13909
2017-07-12 13:06:56 +08:00
Angus Gratton
71c70cb15c heap: Refactor heap regions/capabilities out of FreeRTOS
Remove tagged heap API, rename caps_xxx to heap_caps_xxx

Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Angus Gratton
5ee49fd311 heap: Add new multi_heap heap implementation to replace FreeRTOS-based tagged heaps 2017-07-10 17:46:03 +08:00
Jan Mrázek
f698a1b2d3 Add missing support for C++ exceptions
Specifying -fexceptions for the compiler is not enough.

- add necessary zero padding after .eh_frame section
- link .gcc_except_table_table in a way flash script does not complain
- call __registrer_frame_info before global constructors

Kudos jcmvbkbc for the necessary help.
2017-06-28 13:53:42 +08:00
Alexey Gerenkov
8d43859b6a esp32: SEGGER SystemView Tracing Support
Implements support for system level traces compatible with SEGGER
SystemView tool on top of ESP32 application tracing module.
That kind of traces can help to analyse program's behaviour.
SystemView can show timeline of tasks/ISRs execution, context switches,
statistics related to the CPUs' load distribution etc.

Also this commit adds useful feature to ESP32 application tracing module:
 - Trace data buffering is implemented to handle temporary peaks of events load
2017-06-27 20:52:43 +03:00
Tian Hao
09f7cf45dd component/bt : fix interrupt number conflict
1. the typical problem is when push keyboard on serial tool, the bluetooth may stop.
2017-06-15 19:41:54 +08:00
Ivan Grokhotkov
f327a9b1cf esp32: don’t reset APP CPU if it was already reset by OpenOCD
When ‘reset halt’ command is executed, OpenOCD will take the APP CPU
out of reset and enable the clock. At this point, user can set a
breakpoint on code which will run on APP CPU. Previously, app startup
code would do another reset of APP CPU, thereby removing any breakpoints
which may have been set. This change makes APP CPU reset conditional on
DPORT_APPCPU_CLKGATE_EN bit, which is 0 by default but is set to 1 by
OpenOCD after reset.
2017-06-12 15:16:57 +08:00
jack
ba32dd30a1 bugfix:Fix bug that wdt reset information for CPU1 was not correct 2017-06-05 18:26:14 +08:00
Tian Hao
f7e8856520 component/esp32 : fix dualcore bug
1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.
2017-05-08 21:53:43 +08:00
Ivan Grokhotkov
fe695a9af8 Merge branch 'feature/cpu_restart_sequence' into 'master'
Restart sequence requires set up for app cpu.

These changes required to make correct restart of CPU form JTAG.

See merge request !703
2017-04-27 09:30:42 +08:00
Dmitry Yakovlev
baeab37560 Debug info removed. 2017-04-26 10:31:05 +03:00
Dmitry Yakovlev
00aa73c6cf Restart sequence requires set up for app cpu. 2017-04-26 07:47:37 +03:00
Ivan Grokhotkov
6353bc40d7 Add support for 32k XTAL as RTC_SLOW_CLK source
- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.
2017-04-26 12:43:22 +08:00
Alexey Gerenkov
77a92e6dcc esp32: Added dumping info from traceport upon reset by any WDT
- Last PC info and waiti mode indication are printed for both CPUs
 - Raw traceport regs values are printed only for log levels higher than DEBUG
2017-04-23 22:07:56 +03:00
Jeroen Domburg
f73c6f875c Merge branch 'bugfix/dont_log_before_bss_inited' into 'master'
Remove ESP_EARLY_LOGI before bss is initialized; it crashes the CPU

There's an ESP_EARLY_LOGI line that can get called before the BSS is initialized; the early logging code doesn't cope well with that: it checks if FreeRTOS is up, but the variables it uses for that contains garbage because it isn't cleared yet, giving the wrong result. The logging code then tries to set a mux, crashing the entire system. This patch removes the log line and adds a warning at the BSS initialization line not to do anything complex before that point.

Fixes https://github.com/espressif/esp-idf/issues/523

See merge request !671
2017-04-18 11:21:31 +08:00
Alexey Gerenkov
55f1a63faf esp32: Adds functionality for application tracing over JTAG
- Implements application tracing module which allows to send arbitrary
   data to host over JTAG. This feature is useful for analyzing
   program modules behavior, dumping run-time application data etc.
 - Implements printf-like logging functions on top of apptrace module.
   This feature is a kind of semihosted printf functionality with lower
   overhead and impact on system behaviour as compared to standard printf.
2017-04-17 23:26:29 +03:00
Ivan Grokhotkov
639557d975 trace: add Kconfig options for app level trace
CONFIG_MEMMAP_TRACEMEM is now a hidden underlying option, which can be enabled using either CONFIG_ESP32_TRAX or CONFIG_ESP32_APP_TRACE
2017-04-17 22:19:14 +03:00
Jeroen Domburg
76a4082de7 Remove ESP_EARLY_LOGI before bss is initialized; it crashes the CPU 2017-04-16 23:34:03 +08:00
Jeroen Domburg
0b79d07d34 add detection of invalid cache access
- fix level 4 interrupt vectors to produce correct backtrace
- initialize invalid cache access interrupt on startup
- handle invalid cache access in panic handler
2017-04-13 15:27:38 +08:00
Ivan Grokhotkov
7ee8ee8b7e soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
Ivan Grokhotkov
8915c18f8a esp32: initialize cross-core interrupt in single core mode
The software interrupt originally used as the cross-core interrupt is
now also used to yield from a FreeRTOS critical section; therefore it
must be initialized for single core mode as well.

Fixes https://github.com/espressif/esp-idf/issues/496
2017-04-07 14:48:08 +08:00
Alexey Gerenkov
c142b9b9e5 esp32: RWDT is used to reboot system in case of panic handler crash
also fixes TG1WDG protection bug in panic handler
2017-04-07 02:34:29 +03:00
Ivan Grokhotkov
6ad0a157e3 driver/rtc: add APIs to enable/disable hold function 2017-03-24 10:11:13 +08:00
Jeroen Domburg
0db8b00b8a tight 28k 2017-03-08 19:04:28 +08:00
XiaXiaotian
bb0298bc71 coexist: enable coexist when wifi&bt are enabled, disable coexist when one of wifi&bt is disabled. 2017-02-20 23:53:25 +08:00
XiaXiaotian
eb14284c92 disable PHY and RF when stop WiFi and disable BT
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
Ivan Grokhotkov
777816cb99 phy_init: don’t rewrite valid calibration data
In the default PHY init routine, calibration data is loaded from NVS.
Most of the time the incremental changes to calibration will be fairly
small, so we don’t need to rewrite the existing calibration data stored
in the NVS.

Possible enhancement to be done in the future: expose a function in PHY
library to tell how big was the change in calibration data. If the
change was significant, then calibration data stored in NVS should be
updated.
2017-02-07 15:14:45 +08:00
Alexey Gerenkov
04acc88023 esp32: Fixes watchdog problem when printing core dump to uart
Also fixes generation of core dumps when flash cache is disabled
2017-02-01 18:39:28 +03:00
me-no-dev
865b21d5a1 Fix compilation if CONSOLE_UART is set to NONE
CONFIG_CONSOLE_UART_BAUDRATE is not defined
2017-01-18 15:36:10 +02:00
Ivan Grokhotkov
f20135af54 esp32: compile PHY-related code only when WiFi is enabled
Fixes https://github.com/espressif/esp-idf/issues/230, https://github.com/espressif/esp-idf/issues/237
2017-01-16 02:38:32 +08:00
Alexey Gerenkov
ad66fbe5ad esp32: Fixes issues discussed during code review of MR!341
The following issues mentioned during MR!341 review were fixed:
1) Core dump test application description
2) Usage of CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH and CONFIG_ESP32_ENABLE_COREDUMP_TO_UART
3) FLASH_GUARD_START macro usage is fixed in flash API
4) Core dump module logging facility
5) cache util functions doc updated
6) interactive delay before print core dump to uart
7) core dump partion support in build system
2017-01-12 19:38:19 +03:00
Alexey Gerenkov
39ddc7b836 esp32: Fixes several issues in core dump feature
1) PS is fixed up to allow GDB backtrace to work properly
2) MR!341 discussion: in core dump module: esp_panicPutXXX was replaced by ets_printf.
3) MR!341 discussion: core dump flash magic number was changed.
4) MR!341 discussion: SPI flash access API was redesigned to allow flexible critical section management.
5) test app for core dump feature was added
6) fixed base64 file reading issues on Windows platform
7) now raw bin core file is deleted upon core loader failure by epscoredump.py
2017-01-11 20:51:28 +03:00
Alexey Gerenkov
23f836659d esp32: Add core dump printing to UART feature 2017-01-11 20:51:28 +03:00
Alexey Gerenkov
4a3e160888 esp32: Add core dump saving to flash feature
Complimentary changes:
1) Partition table definitions files with core dump partition
2) Special sub-type for core dump partition
3) Special version of spi_flash_xxx
4) espcoredump.py is script to get core dump from flash and print useful info
5) FreeRTOS API was extended to get tasks snapshots
2017-01-11 20:51:28 +03:00
Ivan Grokhotkov
35115885c5 deep sleep: add API to control power down 2016-12-16 14:30:27 +08:00
Jeroen Domburg
78161a1fe3 Replace non-multicore-aware rom funcs with multicore-aware funcs, ESP_LOG->ESP_EARLY_LOG fix, reserve ints used in wireless libs. Fixes WiFi crashing 2016-12-13 13:24:01 +08:00
Jeroen Domburg
655fd2986a Add interrupt allocation scheme / interrupt sharing. Also modifies drivers and examples. Also allows interrupts
to be marked specifically as having a handler that's all in IRAM.
2016-12-08 12:39:33 +08:00