Commit graph

1931 commits

Author SHA1 Message Date
Angus Gratton
3050f06a8d FreeRTOS: Support setting task name max length
Ref: https://esp32.com/viewtopic.php?f=13&t=1297&p=5762
2017-02-27 11:46:16 +11:00
Ivan Grokhotkov
36b3963efb Merge branch 'feature/btdm_ram_config' into 'master'
Optimize or release memory in bluetooth

1. add option to release about 30K from BT if BLE only
2. later BT/BLE will be separated by BT/BLE macro, but this option should use when user make sure that in BLE only mode.

See merge request !520
2017-02-23 18:21:16 +08:00
Jeroen Domburg
7dfb1c2e97 Merge branch 'bugfix/app_tasks_start_on_wrong_cpu' into 'master'
Fix a scheduling bug

Fixes:
- Trivial bug where in some special cases a task could be started on the wrong core (and would run there for max 1 tick)
- More major bug causing a yield to be done with a mux held.

See merge request !523
2017-02-23 11:19:37 +08:00
Jeroen Domburg
c057f067c7 Merge branch 'bugfix/spi_master_length' into 'master'
Fix SPI master transmit length

Tx/Rx length fix from https://github.com/espressif/esp-idf/pull/336

I also added an extra commit in to make use of a define instead of a literal, plus fix a (harmless) off-by-one condition.

See merge request !521
2017-02-22 17:11:00 +08:00
Jeroen Domburg
ce7d0a7015 Fixed a small bug where a task could initially be scheduled on a wrong CPU, and a much bigger bug where a yield was performed with a held mux. 2017-02-22 17:04:51 +08:00
Ivan Grokhotkov
d772e1489b Merge branch 'bugfix/bootloader_disable_sar_test_mux' into 'master'
Deep sleep fixes

This change fixes extra 24 uA current consumption in deep sleep mode (https://esp32.com/viewtopic.php?f=2&t=1133).

Recent update to libphy/librtc caused another problem that WiFi related parts of RTC are no longer disabled by RTC sleep functions. This means that if WiFi is not disabled by the application before entering deep sleep, extra ~200uA of current would be consumed. This is fixed, and documentation for esp_deep_sleep and SNTP example are updated to mention that applications should take care of disabling WiFi and BT before going into the deep sleep mode.

See merge request !516
2017-02-22 14:32:32 +08:00
Ivan Grokhotkov
dca0377e19 Merge branch 'bugfix/flash_write_single_core' into 'master'
spi_flash: fix protection issues

This MR fixes the two spi_flash related issues:

- esp_intr_noniram_{disable,enable} not being protected by spi_flash_op_{lock,unlock} in single core mode. This caused a safety assert to be triggered in esp_intr_noniram_disable.

- spi_flash_unlock not being protected by spi_flash_guard_{start,end}. This caused a conflict between SPI0 and SPI1 controllers when accessing SPI flash, manifesting in cache data corruption and IllegalInstruction exceptions, for some flash chips.


See merge request !522
2017-02-22 14:17:40 +08:00
Ivan Grokhotkov
cbb71baca9 spi_flash: protect spi_flash_unlock
spi_flash_unlock was missing spi_flash_guard_start, which caused cache
to be enabled during unlock operation, causing hard-to-trace crashes
and cache data corruption.
2017-02-22 12:51:16 +08:00
Angus Gratton
045307ea0f Merge branch 'bugfix/make_config_problems' into 'master'
build system: Fix several make & configuration problems

Collection of quasi-related build system fixes:
* Fix issues with "make menuconfig" running twice when no existing sdkconfig
* Fix issues with menuconfig getting into a bad state if "make -jN" and no existing sdkconfig
* Hopefully fix intermittent issue with build system sometimes not picking up all config, leading to missing BT/WiFi libs at compile/link time.
* Fix issues with path resolution on Windows (including in Eclipse)
* Add new BATCH_BUILD variable for IDEs and automated build environments.

See merge request !485
2017-02-22 10:10:34 +08:00
Angus Gratton
f29768c404 Build system: Add new BATCH_BUILD flag to disable interactive parts of the build
Mostly useful for Eclipse (where accidentally running interactive
config hangs the build), but also good for CI and other automated
build systems.
2017-02-22 11:59:37 +11:00
Angus Gratton
c0f155f6ff kconfig: Ignore Windows host-compiled executables 2017-02-22 11:59:37 +11:00
Angus Gratton
8dede8f8a4 Eclipse: Process Windows paths correctly using cygpath
Includes splitting the Windows Eclipse setup doc into a separate page,
as it has so many additional steps.

Addresses github #17 and #166
https://github.com/espressif/esp-idf/issues/17
https://github.com/espressif/esp-idf/issues/166
2017-02-22 11:59:37 +11:00
Angus Gratton
d28ee9a25e build system: Account for Windows behaviour of make wildcard for some dirs
See github #166
2017-02-22 11:59:37 +11:00
Angus Gratton
c3544dc090 Build system: Fix error if librtc submodule not available to bootloader
Closes #220 https://github.com/espressif/esp-idf/issues/220
2017-02-22 11:59:37 +11:00
Angus Gratton
3c90032369 build system: Fix parallel & double menuconfig issues when sdkconfig missing
Fixes misbehaviour of default menuconfig when sdkconfig is missing.

(Either appearing twice, or breaking if make -jN is used.)
2017-02-22 11:58:49 +11:00
Angus Gratton
e91d436e45 build system: Probable fix for errors due to bad config bypassing components
See github #311 https://github.com/espressif/esp-idf/issues/311

Should fix weird compiler/linker bugs where config says something is
enabled, but build system says it is disabled.
Particularly noticeable when WiFi/BT libraries fail to
compile/link despite being enabled.

Underlying cause is configuration file regenerating, but component
Makefiles not reevaluating.

Entirely removes the idea that we don't need to generate config for some
targets (like 'clean'). We need valid config for these targets,
otherwise they don't know which files to clean (etc).
2017-02-22 11:58:49 +11:00
Angus Gratton
de28d3a655 Merge branch 'feature/partition_table_envvars' into 'master'
partition tables: Expand environment variables in gen_esp32part

Allows parametrizing partition table with (exported) make variables.

Merges PR #301 https://github.com/espressif/esp-idf/pull/301

See merge request !505
2017-02-22 07:22:04 +08:00
Ivan Grokhotkov
e76c187efb spi_flash: protect esp_intr_noniram_{disable,enable} in 1-core config
MR !441 (7c155ab) has fixed issue with esp_intr_noniram_{disable,enable}
calls not being properly protected by spi_flash_op_{lock,unlock}.
Unit test was added, but the unit test environment tests only dual-core
config. Similar issue was present in the code path for the single-core
config, where esp_intr_noniram_{disable,enable} calls were unprotected.

This change fixes the protection issue and updates the unit test to
run properly in single core config as well.

The issue with running unit tests for single core config will be
addressed in a separate MR.
2017-02-21 21:57:53 +08:00
Jeroen Domburg
e35ebbf813 Use THRESH_DMA_TRANS define everywhere, make code match "smaller or equal" description 2017-02-21 18:27:56 +08:00
Lourens Naudé
04f7d96623 Fix SPI read edges in spi_intr
Signed-off-by: Jeroen Domburg <jeroen@espressif.com>
2017-02-21 18:26:03 +08:00
Tian Hao
55693b1168 component/bt : add option to release about 30K from BT if BLE only
1. later BT/BLE will be separated by BT/BLE macro, but this option should use when user make sure that in BLE only mode.
2017-02-21 17:46:59 +08:00
Ivan Grokhotkov
26dec992eb deep sleep: add note about disabling WiFi and BT
This change adds a note to esp_deep_sleep that applications should disable WiFi and BT before going into deep sleep.
SNTP example is also updated.
2017-02-21 17:07:16 +08:00
Ivan Grokhotkov
d3fde5188e deep sleep: bring some registers into known state
In case WiFi/BT stack has been enabled but wasn’t disabled, some RTC
bits may be left enabled, causing increased current consumption.
This change returns some of the bits back to their default values.
2017-02-21 17:07:15 +08:00
Ivan Grokhotkov
3b583c150f bootloader: disconnect VRTC from SAR input in bootloader_random_disable
Bootloader enables SAR ADC in test mode to get some entropy for the RNG.
The bits which control the ADC test mux were not disabled, which caused
extra ~24uA current to be drawn from VRTC, increasing deep sleep current
consumption. This change disables relevant test mode bits in
bootloader_random_disable.
2017-02-21 17:07:15 +08:00
Ivan Grokhotkov
1405fd1fef Merge branch 'bugfix/exception_after_merge_phy_disable' into 'master'
bugfix: it causes exception that wifi interrupt happens when read/write flash, i…

…f pp_post() is on icache.

See merge request !518
2017-02-21 16:16:41 +08:00
XiaXiaotian
a51f378ecc bugfix: it causes exception that wifi interrupt happens when read/write flash, if pp_post() is on icache. 2017-02-21 14:25:34 +08:00
Jiang Jiang Jian
b5d1eb42b4 Merge branch 'feature/disable_phy_rf_when_disable_wifi_bt' into 'master'
disable PHY and RF when stop WiFi and disable BT

1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.

See merge request !510
2017-02-21 01:40:49 +08:00
XiaXiaotian
678ec0bd04 Merge branch 'master' of ssh://gitlab.espressif.cn:27227/idf/esp-idf into feature/disable_phy_rf_when_disable_wifi_bt 2017-02-21 01:20:48 +08:00
Tian Hao
12a7293b31 component/bt : add bluetooth status check
1. add bluetooth controller/host initialize status check
2. separate bluetooth controller task schedule loop from controller init
2017-02-21 01:05:37 +08:00
XiaXiaotian
bb0298bc71 coexist: enable coexist when wifi&bt are enabled, disable coexist when one of wifi&bt is disabled. 2017-02-20 23:53:25 +08:00
Ivan Grokhotkov
7eaf1c76dc Merge branch 'bugfix/vfat_open_append' into 'master'
Fix fopen() in “a” (append) mode

fopen() does not work when file is opened in “a” (append) mode

* Merges github PR #302 https://github.com/espressif/esp-idf/pull/302
* Closes #328 https://github.com/espressif/esp-idf/issues/328

See merge request !503
2017-02-20 13:32:32 +08:00
XiaXiaotian
770c2ade05 phy init: modify some comments 2017-02-20 10:44:40 +08:00
Angus Gratton
95b62ef980 Merge branch 'feature/doc_drivers' into 'master'
docs: Add missing peripheral driver docs (ADC, DAC, RTC I/O, I2S)

Plus some general driver doc related cleanup.

touch_pad docs to follow in a subsequent MR.

See merge request !508
2017-02-20 10:28:52 +08:00
Angus Gratton
4db4e28b6e uart driver docs: Remove references to setting interrupt number
Closes #185 https://github.com/espressif/esp-idf/issues/185
2017-02-20 10:39:29 +11:00
Angus Gratton
bfdfcbfaef docs: Add missing peripheral driver docs (ADC, DAC, RTC I/O, I2S) 2017-02-20 10:39:29 +11:00
Angus Gratton
21964a42fb rtc_gpio: Replace RTC_GPIO_IS_VALID_GPIO macro with inline function 2017-02-20 10:39:29 +11:00
Tian Hao
4bd5b0c91a component/bt : add bt enable/disable for power save
1. add new APIs bt controller enable/disab/deinit
2. make bt controller work need to call two APIs of esp_bt_controller_init and enable
3. modify phy init to make mac reset once
2017-02-17 19:24:58 +08:00
XiaXiaotian
8f3d1d3184 fix compile error that if enable CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION compile fail 2017-02-17 15:29:11 +08:00
Jiang Jiang Jian
4494e15ecf Merge branch 'feature/btdm_pll_track' into 'master'
component/bt : wide range work temperature for bluetooth RF

1. add PLL track for bluetooth RF for wide range temperature
2. move some initialized codes to cache

See merge request !511
2017-02-17 13:48:26 +08:00
Tian Hao
ad890aa5ea component/bt : wide range work temperature for bluetooth RF
1. add PLL track for bluetooth RF for wide range temperature
2. move some initialized codes to cache
2017-02-17 12:26:28 +08:00
XiaXiaotian
cd13c9e95d disable phy and rf
1. add a macro in menuconfig for users to choose whether store phy calibration data into NVS or not.

2. rename some disable phy and rf APIs so that existing code which calls old APIS will fail to compile.
2017-02-17 10:24:55 +08:00
XiaXiaotian
eb14284c92 disable PHY and RF when stop WiFi and disable BT
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
Jiang Jiang Jian
61c7bd3c3a Merge branch 'bugfix/btdm_gatt' into 'master'
component/bt : fix gatt write memory leak

fix bug of GATT write cause memory leak 

See merge request !506
2017-02-16 15:13:05 +08:00
Jiang Jiang Jian
6c139c8ffb Merge branch 'feature/ethernet_phy_power' into 'master'
ethernet: add a gpio to enable/disable phy power

ethernet board v2 use gpio 17 .

See merge request !495
2017-02-16 15:12:09 +08:00
Jiang Jiang Jian
997fbf9e18 Merge branch 'bugfix/btdm_iphone10_0_2' into 'master'
Bugfix/btdm iphone10 0 2

This connection error caused by iPhone, it think that TX data length must large than 27 when slave support EXTEND_DATA_LENGTH. But this should be allow. Besides,  the problem cannot be found on higher version of Iphone7, apple seemed to have fixed it.
Actually maybe other BLE device have the same problem.

See merge request !509
2017-02-16 15:10:50 +08:00
shangke
2fc4413dae ethernet: add pin macro 2017-02-16 14:36:46 +08:00
Tian Hao
6648ff427c component/bt : fix connection bug of Iphone7 10.0.2
This connection error caused by iPhone, it think that TX data length must large than 27 when slave support EXTEND_DATA_LENGTH. But this should be allow. Besides,  the problem cannot be found on higher version of Iphone7, apple seemed to have fixed it.
Actually maybe other BLE device have the same problem.
2017-02-16 14:15:46 +08:00
Tian Hao
5023e30a33 component/bt : fix gatt write memory leak 2017-02-15 20:08:39 +08:00
Angus Gratton
9cea5ea075 fatfs: Add unit test for overwrite/append fix 2017-02-15 18:04:28 +11:00
Ivan Grokhotkov
34d0b0086e Merge branch 'bugfix/openssl_server_example' into 'master'
Example 10_openssl_server should use TLSv1.2 instead of SSLv3; fixed corrupted HTTP Header

* Merges github PR #214 https://github.com/espressif/esp-idf/pull/214
* Closes #333 https://github.com/espressif/esp-idf/issues/333

See merge request !501
2017-02-15 14:34:08 +08:00