Commit graph

305 commits

Author SHA1 Message Date
krzychb
eae3b45170 LEDC Driver: Added back original definitions of 'duty_resolution' and 'clock_divider'. This update is to provide backward compatibility with ESP-IDF 2.1. 2017-12-07 20:52:54 +08:00
Jiang Jiang Jian
c672fc54fd Merge branch 'feature/ledc_more_meaningful_parameter_names' into 'master'
Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resoluti…

See merge request !1440
2017-12-01 19:33:53 +08:00
krzychb
866b84b9f8 Typo fix. Closes https://github.com/espressif/esp-idf/issue/1323 2017-12-01 09:06:08 +01:00
Angus Gratton
5e7478a055 Merge branch 'bugfix/ledc_fade_scale' into 'master'
driver(LEDC): add scale value check in ledc_set_fade API

See merge request !1583
2017-11-27 07:23:19 +08:00
panfeng
b553c925b1 bugfix: while scale equals 0 will cause crash 2017-11-23 17:56:18 +08:00
kooho
ada33fe3dd Add GPIO input and output disable option 2017-11-22 15:00:27 +08:00
Ivan Grokhotkov
4b8f55aadf Merge branch 'bugfix/minor_fixes_github' into 'master'
Minor fixes from github

See merge request !1555
2017-11-20 15:58:34 +08:00
Angus Gratton
f54e99008d spi: Add ESP_ERR_NO_MEM to spi_device_queue_trans() documentation
Ref https://github.com/espressif/esp-idf/pull/1243#issuecomment-343103414
2017-11-20 16:06:59 +11:00
michael
02573a8dc9 fix(spi_master): release temporary memory when queue new trans timeout. 2017-11-17 12:15:19 +08:00
michael
13d38f10ee test(spi): internal connection test master with slave for address and command field. 2017-11-17 12:15:19 +08:00
michael
57e1d47ad7 fix(spi_master): fix the CS pin issue with GPIO 0.
Closes #909
2017-11-17 12:15:19 +08:00
michael
842292523f fix(spi_slave): add interrupt free into bus free process. 2017-11-17 12:14:40 +08:00
Raphael Luba
31711b5ac7 SPI: Document TIMEOUT return values
`spi_device_queue_trans` and `spi_device_get_trans_result` can return `ESP_ERR_TIMEOUT` – but this had not been documented.

Merges https://github.com/espressif/esp-idf/pull/1243
2017-11-17 10:50:54 +11:00
krzychb
d488bb7bac Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider' 2017-11-15 08:08:12 +01:00
Ivan Grokhotkov
da141a2c7e Merge branch 'bugfix/touch_pad_register_mismatch' into 'master'
Bugfix/touch pad register mismatch

See merge request !1469
2017-11-15 14:52:13 +08:00
Wangjialin
7200b2cc11 bugfix(touch): registers of touchpad 8 and 9 are mismatched
1. All the registers of touch sensor 8 and 9 are mismatched except the ‘dac’ field in touch register of RTC IO
2. To swap the index for sensor 8 and 9 in APIs.
2017-11-14 18:47:56 +08:00
Ivan Grokhotkov
09d2791cfd Merge branch 'feature/spi_variable_len' into 'master'
feat(spi_master): add new feature allow use variable command and address field length for the same device.

See merge request !1322
2017-11-14 00:08:50 +08:00
Ivan Grokhotkov
5404252e80 Merge branch 'bugfix/uart_fifo_bug_workaround' into 'master'
bugfix(uart): workaround for uart fifo reset issue

See merge request !1499
2017-11-13 17:46:42 +08:00
Wangjialin
4052803e16 bugfix(uart): workaround for uart fifo reset issue
Reported from github:
https://github.com/espressif/esp-idf/issues/1219
https://github.com/espressif/esp-idf/issues/1202

After providing a simple code to digital team, they confirmed that this is a hardware bug.

Root cause:
The fifo reset signal is incorrectly connected
If we want to reset tx fifo of UART2, we have to set txfifo_rst bit of both UART1 and UART2
If we want to reset rx fifo of UART2, we have to set rxfifo_rst bit of both UART1 and UART2

Workaround:
we don't use fifo rst bit in driver.

Documentation:
Digital team would update TRM and give more explanation about this issue.
2017-11-13 15:23:00 +08:00
Anton Maklakov
27c1fc52ba Added .command_timeout_ms = 0 to SDSPI_HOST_DEFAULT() too 2017-11-08 12:52:50 +08:00
Philip Ashmore
d72bef02e9 Added .command_timeout_ms = 0 to SDMMC_HOST_DEFAULT() in components/driver/include/driver/sdmmc_host.h 2017-11-03 17:15:44 +08:00
XiaXiaotian
42cefc173f refractor WiFi clock setting
Do not set WiFi clock in PHY initializing function, move it to WiFi
   start/stop function.
2017-11-02 15:24:21 +08:00
wangmengyang
bd6394db92 component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
michael
0330ec270a feat(spi_master): add new feature allow use variable command and address field length for the same device.
Closes #654
2017-10-30 19:33:41 +08:00
Angus Gratton
7c9b24b407 Merge branch 'bugfix/fix_uart_vfs_test_error' into 'master'
bugfix(uart): Don't disable console uart peripheral

See merge request !1456
2017-10-27 19:20:13 +08:00
Wangjialin
102eb96c8b bugfix(uart): Don't disable console UART peripheral 2017-10-27 16:46:10 +08:00
Angus Gratton
ffeecde9e2 Merge branch 'feature/docs_update_timer_api' into 'master'
Timer API docs update, refactored example

See merge request !1316
2017-10-27 13:31:18 +08:00
krzychb
9b7d5d76a7 Timer API docs update, refactored example 2017-10-27 07:13:59 +02:00
Angus Gratton
f5b3a370cd Merge branch 'feature/adc2_driver' into 'master'
feature(adc2): add support to use ADC2 when WIFI is disabled

See merge request !1237
2017-10-26 15:48:48 +08:00
michael
87f2b27dc4 refactor(rtc): re-organize code in rtc_module.c 2017-10-26 14:35:30 +08:00
michael
d30f3e7aa8 example(adc2): add example and test case for adc2.
closes #461
2017-10-26 14:35:30 +08:00
esp32de
7c0020bfd0 feat(adc2): append adc2 support and api and the lock with WIFI module
append adc support and api
- esp_err_t adc2_config_width(adc_bits_width_t width_bit);
- esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
- int adc2_get_voltage(adc2_channel_t channel);
2017-10-26 14:35:29 +08:00
Wangjialin
303b9f60db bugfix(uart): set default tx idle num
Reported from:
https://github.com/espressif/esp-idf/issues/703
https://github.com/espressif/esp-idf/issues/917
In uart driver we didn't change the default value of tx idle num, so there would be a delay after tx FIFO is empty.

1. Add API to set tx idle interval before next data transmission. (The UART hardware can add an interval after tx FIFO is empty).
2. Set default tx idle interval to zero.
3. Add hardware disable in uart driver delete function.
2017-10-25 13:29:02 +08:00
michael
a6ac5b33c9 feat(rtc): open adc*(dac)_pad_get_io_num functions to public. 2017-10-24 12:06:14 +08:00
michael
cff8d30c25 refactor(rtc): change register writing from macros to structures in *_struct.h 2017-10-24 12:05:52 +08:00
Angus Gratton
01befe4d6a Merge branch 'bugfix/i2c_hw_fsm_recover' into 'master'
bugfix(i2c): add I2C hardware reset if the hw FSM get stuck

See merge request !1272
2017-10-23 10:16:02 +08:00
Ivan Grokhotkov
f039aac1e5 Merge branch 'bugfix/i2s_bck_polariy' into 'master'
bugfix(i2s): fix bck polarity issue when using pll clock.

See merge request !1428
2017-10-22 12:36:27 +08:00
Ivan Grokhotkov
000a4f5941 Merge branch 'bugfix/rmt_thresh_check' into 'master'
bugfix(rmt): fix event thresh check issue

See merge request !1423
2017-10-22 12:35:44 +08:00
Ivan Grokhotkov
59b7d98fec Merge branch 'feature/dfs' into 'master'
Dynamic frequency scaling

See merge request !1189
2017-10-22 12:34:11 +08:00
Wangjialin
ed1e32f583 bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
Reported from different sources from github or bbs:

https://github.com/espressif/esp-idf/issues/680

https://github.com/espressif/esp-idf/issues/922

We tested reading several sensor or other I2C slave devices, if the power and SDA/SCL wires are in proper condition, everything works find with reading the slave.
If we remove the power supply for the slave during I2C is reading, or directly connect SDA or SCL to ground, this would  cause the I2C FSM get stuck in wrong state, all we can do is the reset the I2C hardware in this case.
After this commit, no matter whether the power supply of I2C slave is removed or SDA / SCL are shorted to ground, the driver can recover from wrong state.

We are not sure whether this the save issue with the reported one yet, but to make the driver more robust.

Further information:

1. For I2C master mode, we have tested different situations, e.g., to short the SDA/SCL directly to GND/VCC, to short the SDA to SCL, to un-plug the slave device, to power off the slave device. Under all of those situations, this version of driver can recover and keep working.
2. Some slave device will die by accident and keep the SDA in low level, in this case, master should send several clock to make the slave release the bus.
3. Slave mode of ESP32 might also get in wrong state that held the SDA low, in this case, master device could send a stop signal to make esp32 slave release the bus.

Modifications:

1. Disable I2C_MASTER_TRAN_COMP interrupt to void extra interrupt.
2. Disable un-used timeout interrupt for slave.
3. Add bus reset if error detected for master mode.
4. Add bus clear if SDA level is low when error detected.
5. Modify the argument type of i2c_set_pin.
6. add API to set timeout value
7. add parameter check for timing APIs
2017-10-21 02:10:59 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Angus Gratton
477ed8ce62 Merge branch 'bugfix/touchpad_dac_mismatch_on_tp8_tp9' into 'master'
bugfix(touch): add workaround for touch pad DAC hardware source mismatch on tp8 and tp9.

See merge request !1288
2017-10-20 14:18:32 +08:00
Wangjialin
a84db78eb1 bugfix(i2s): fix bck polarity issue when using pll clock.
reported from github: https://github.com/espressif/esp-idf/issues/1119

Digital team think it is due to the decimal divider.
We can reset the i2s tx and rx when calling i2s_stop to avoid this.
2017-10-19 23:23:01 +08:00
Wangjialin
ab1abff080 bugfix(rmt): fix event thresh check issue
reported from: https://github.com/espressif/esp-idf/issues/1011

1. Fix event thresh check issue
2. Change IO number in example in case it conflicts with GPIO16(psram cs pin).
2017-10-18 18:49:09 +08:00
Ivan Grokhotkov
5048d38ce7 spi slave: lock APB frequency while driver is in use 2017-10-18 14:37:21 +08:00
Ivan Grokhotkov
e4616588b7 spi master: lock APB frequency while in transaction 2017-10-18 14:19:21 +08:00
Ivan Grokhotkov
330b6bd668 sdmmc: lock APB frequency while in transaction 2017-10-18 14:19:20 +08:00
Ivan Grokhotkov
fba9678c56 uart: add support for REF_TICK 2017-10-18 14:19:20 +08:00
Gabriel Carstoiu
8128bb95ef fix(spi_slave): enable DMA clock when initialization.
merging in the code updates to the SPI master code done in commit b834fcf78a.

TW#15670, Closes #1027
2017-10-17 12:20:40 +08:00
michael
88f602a0e0 fix(periph_ctrl): fix reset function in periph_ctrl.c 2017-10-17 12:20:40 +08:00