f54f776905
Merge branch 'bugfix/ble_mesh_check_stack_init_v3.3' into 'release/v3.3'
...
ble_mesh: stack: Check if mesh stack initialized before init vendor client (v3.3)
See merge request espressif/esp-idf!10484
2020-09-18 09:40:14 +08:00
c7a9851de0
Merge branch 'bugfix/fix_bugs_in_gpio_unit_test_v3.3' into 'release/v3.3'
...
bugfix(ut): fix gpio output and input mode test(backport v3.3)
See merge request espressif/esp-idf!10023
2020-09-18 02:17:42 +08:00
1f32a8d95e
ble_mesh: stack: Check if mesh stack initialized before init vendor client
2020-09-17 11:28:02 +08:00
c3e8fb73c7
Merge branch 'bugfix/missing_regex_error_stub' into 'release/v3.3'
...
Add missing regex_error stub
See merge request espressif/esp-idf!8852
2020-09-16 04:50:54 +08:00
9dda741a99
Merge branch 'bugfix/nvs_no_throw_v3.3' into 'release/v3.3'
...
NVS: Changed all new to new (nothrow) (backport v3.3)
See merge request espressif/esp-idf!7858
2020-09-16 02:49:09 +08:00
a7e1c144e2
Add missing regex_error stub
...
Closes IDFGH-3153
* avoids linker error
2020-09-15 18:20:09 +00:00
8a79415c2e
Merge branch 'bugfix/ulp_as_version_v3.3' into 'release/v3.3'
...
ulp: fix ULP assembler version detection for localized systems (v3.3)
See merge request espressif/esp-idf!10396
2020-09-15 15:09:30 +08:00
bca1beb3f0
spi_master: correctly set cs polarity
...
All devices must be added to the same spi line before use.
2020-09-14 11:58:10 +00:00
64adabfd3a
Merge branch 'bugfix/ble_mesh_prov_iv_index_v3.3' into 'release/v3.3'
...
ble_mesh: stack: Using the latest iv_index for provisioning (v3.3)
See merge request espressif/esp-idf!10419
2020-09-14 14:17:53 +08:00
cbcb218418
Merge branch 'bugfix/fix_i2s_reset_issue_v3.3' into 'release/v3.3'
...
driver(I2S): Fix I2S reset issue for release/v3.3
See merge request espressif/esp-idf!9586
2020-09-14 10:45:50 +08:00
cec88e11ed
Merge branch 'component/seperate_bta_jv_l2c_3.3' into 'release/v3.3'
...
Component/seperate bta jv l2c 3.3
See merge request espressif/esp-idf!9651
2020-09-11 19:38:36 +08:00
34f30a878e
ble_mesh: stack: Using the latest iv_index for provisioning
...
Provisioner should always uses the latest IV Index for provisioning.
For example, if the current IV Index is 0x00000001, but prov->iv_index
is still initialized with 0x00000000, and if Provisioner uses prov->
iv_index for provisioning, this will cause the Provisioner failing to
control the node.
So here bt_mesh.iv_index is used instead of prov->iv_index.
2020-09-11 07:58:20 +00:00
908938bc3c
Merge branch 'bugfix/fix_some_wifi_bugs_0907_v3.3' into 'release/v3.3'
...
bugfix: fix some wifi bugs (backport v3.3)
See merge request espressif/esp-idf!10318
2020-09-10 22:33:18 +08:00
cccdd13937
ulp: fix ULP assembler version detection for localized systems
2020-09-10 09:36:22 +02:00
6c5fc42114
Merge branch 'feat/ble_mesh_use_model_c_v3.3' into 'release/v3.3'
...
ble_mesh: stack: Use model callback for operations [Zephyr] (v3.3)
See merge request espressif/esp-idf!10365
2020-09-10 10:40:19 +08:00
7514850962
Merge branch 'bugfix/ble_mesh_remove_assert_v3.3' into 'release/v3.3'
...
ble_mesh: stack: Avoid using assert in mesh stack (v3.3)
See merge request espressif/esp-idf!10361
2020-09-10 10:39:21 +08:00
9b70ddbb77
ble_mesh: stack: Use model callback for operations [Zephyr]
...
- Previously when a model is initialized or deinitialized, in the
access layer, we need to check the model id with the ids in the
table in order to find the proper model operation function.
- Currently all the operation functions of each model will be set
during the mesh initialization. When the model is found, we can
directly use the corresponding callback for different operations.
- Currently only init/deinit operations are registered, later we
will add more operations.
2020-09-09 14:01:17 +08:00
1090c12acd
ble_mesh: stack: Avoid using assert in mesh stack
2020-09-09 10:58:18 +08:00
d79e95e6e0
ble_mesh: nimble: Fix updating ccc handle with wrong value
2020-09-09 10:50:40 +08:00
a3ef2bbe33
Merge branch 'feature/vfs_uart_set_line_ending_v3.3' into 'release/v3.3'
...
feature: support vfs uart set line endings with specified uart number release/v3.3
See merge request espressif/esp-idf!9595
2020-09-09 10:36:59 +08:00
a571bc0d0a
bugfix: fix some wifi bugs
...
1. add sta connect again ap sent disconnect event
2. add set/get inactive time api
3. fix connect hidden AP doesn't update information
4. add rf test long short support
2020-09-08 14:18:00 +08:00
3b79b6b5da
Merge branch 'bugfix/remove_auto_conn_case_v3.3' into 'release/v3.3'
...
test: remove auto conn case because we do not support this anymore (v3.3)
See merge request espressif/esp-idf!9943
2020-09-07 20:45:52 +08:00
93ad53c09d
spi_flash: don't call vTaskDelay in non-os context
...
Fixes regression in core dump, when a crash happens in interrupt
context.
2020-09-04 21:30:01 +02:00
2ad0565e3a
mbedtls: update to mbedtls release v2.16.7
...
For detailed release notes, please refer to:
https://github.com/ARMmbed/mbedtls/releases/tag/mbedtls-2.16.7
2020-09-03 05:10:30 +00:00
6552aef2e7
driver test: disable the spi master performance test when psram is used
2020-09-01 16:41:59 +00:00
b2b47b4465
Merge branch 'bugfix/fix_some_wifi_bugs_0703_v3.3' into 'release/v3.3'
...
fix some wifi bugs 0703 (v3.3)
See merge request espressif/esp-idf!9537
2020-09-01 11:34:29 +08:00
173c76cb04
Merge branch 'bugfix/ble_mesh_client_msg_optimize_v3.3' into 'release/v3.3'
...
Bugfix/ble mesh client msg optimize (v3.3)
See merge request espressif/esp-idf!10207
2020-09-01 09:33:39 +08:00
c30a264d21
Merge branch 'bugfix/put_periph_module_enable/diable_into_iram_v3.3' into 'release/v3.3'
...
wifi, bt: move esp_phy_common_clock_disable into periph_ctrl and put it into IRAM(v3.3)
See merge request espressif/esp-idf!10109
2020-08-31 19:23:26 +08:00
31060cf42b
ble_mesh: stack: Client model related code clean
2020-08-31 13:18:53 +08:00
8a19d03a1c
ble_mesh: stack: Rename cfg & health client status recv func
2020-08-31 13:18:48 +08:00
d5e9fc092c
ble_mesh: stack: Check client msg result in common func
2020-08-31 13:18:42 +08:00
8ae06fde5f
ble_mesh: stack: Fix no events for some error conditions
2020-08-31 13:18:37 +08:00
90e2bbe330
ble_mesh: stack: Move client role set to the msg function
2020-08-31 13:18:31 +08:00
9aa33c344a
ble_mesh: stack: Remove some not used client parameters
2020-08-31 13:18:25 +08:00
7cb6b85ec9
ble_mesh: stack: Remove some not used variables & functions
2020-08-31 13:18:18 +08:00
f11e347e2e
ble_mesh: stack: Update client model msg send
2020-08-31 13:18:11 +08:00
ba47806b8d
Merge branch 'bugfix/http_client_read_v3.3' into 'release/v3.3'
...
Fix error handling in esp_http_client_read and esp_https_ota_perform (v3.3)
See merge request espressif/esp-idf!9205
2020-08-31 13:04:10 +08:00
cfcc189a89
Merge branch 'bugfix/softap_prov_session_v3.3' into 'release/v3.3'
...
protocomm_httpd: Restart security session if request is received on a new session (v3.3)
See merge request espressif/esp-idf!9118
2020-08-31 13:01:12 +08:00
726c74ff39
ble_mesh: stack: Fix recv health current status incorrectly
2020-08-28 17:40:59 +08:00
ff1132d2e4
ble_mesh: stack: Only keep func pointer for very common log
...
Currently only keep func pointer for the followings:
- Invalid parameter (mesh btc & mesh stack)
- Out of memory (mesh btc & mesh stack)
- Unknown act (mesh btc)
- Invalid model user data (mesh stack)
- BT_DBG("%s", __func__) (mesh btc & mesh stack)
- A few other specific situations (buf ref debug, send status check)
2020-08-28 10:51:17 +08:00
6ea6de8d42
ble_mesh: stack: Make proxy server & client functions clear
2020-08-28 10:51:02 +08:00
7e26c8ddda
Merge branch 'bugfix/ble_mesh_add_misc_check_v3.3' into 'release/v3.3'
...
Bugfix/ble mesh add misc check (v3.3)
See merge request espressif/esp-idf!9633
2020-08-28 10:43:55 +08:00
f043a3da97
Merge branch 'update/release_v3.3.3' into 'release/v3.3'
...
version: Update to v3.3.3
See merge request espressif/esp-idf!10180
2020-08-27 19:38:21 +08:00
f6cc9afaa9
ble_mesh: stack: Add proxy cfg pdu length check
2020-08-27 11:20:50 +00:00
55489bb41a
ble_mesh: stack: Rework using dev flag to check scan status
...
Different bluetooth host has different behaviors, so it's better
to maintain a scan check mechanism of BLE Mesh itself.
Fixes an issue when only PB-GATT is enabled for node, which will
output a scan error log when the device is provisioned.
2020-08-27 11:20:50 +00:00
c1c4990f75
ble_mesh: stack: Add more checks about input prov bearers
2020-08-27 11:20:50 +00:00
72f029abc3
Merge branch 'feat/ble_mesh_use_iram_for_mem_alloc_v3.3' into 'release/v3.3'
...
Feat/ble mesh use diff ram for mem alloc (v3.3)
See merge request espressif/esp-idf!9619
2020-08-27 19:19:23 +08:00
c902b1fa24
Merge branch 'bugfix/ble_mesh_update_send_ttl_v3.3' into 'release/v3.3'
...
Bugfix/ble mesh update send ttl v3.3
See merge request espressif/esp-idf!9564
2020-08-27 19:19:01 +08:00
95c7b26cdd
version: Update to v3.3.3
2020-08-27 18:21:03 +10:00
2a6b0d68ce
ble_mesh: stack: Rename mesh adv queue and relay queue
2020-08-26 08:24:55 +00:00
da068a639f
ble_mesh: stack: Use macros for adv task name & prio
2020-08-26 08:24:55 +00:00
df8b2c5f3a
ble_mesh: stack: Make freertos static allocation visible
2020-08-26 08:24:55 +00:00
a194c415a8
ble_mesh: stack: Update option of using DRAM/SPIRAM for memory allocation
2020-08-26 08:24:55 +00:00
8fb47ab0c2
Seperate BTA_JV_L2CAP for less bin size
2020-08-26 15:33:48 +08:00
09113e163b
esp wifi bugfix:
...
1. Fix TX DMA buffer issue
2. API esp_wifi_get_config add acquisition sta.listen_interval
3. Configure bandwidth and phy mode to store NVS
4. If AP's tsf has been restarted, STA will disconnect from AP.
5. Do not reset softAP's tsf except it restart
6. Fix the wifi regdomain update bug
7. Fix the bug for airkiss find hidden AP fail
8. Fix addba and first ampdu send bar
9. Fix WiFi fragment issue
10. Fix WiFi fragment issue
2020-08-26 14:43:53 +08:00
85ca89ee4a
esp_wifi: Add API to get available internal heap size
2020-08-26 14:43:35 +08:00
9825d0004f
Add IRAM_ATTR wifi_bt_common_module_enable/disable()
...
Deleted duplicated spinlock and counter.
2020-08-24 14:00:22 +08:00
c7f33524b4
driver(I2S): Fix I2S reset issue for release/v3.3
...
`i2s_start` reseting I2S in incorrect order causeing the word-order error.
2020-08-24 01:25:39 +00:00
c2ead692aa
bugfix(ut): fix gpio output and input mode test(backport v3.3)
2020-08-20 06:25:40 +00:00
a293dfea7a
feature: support vfs uart set line endings with specified uart number release/v3.3
2020-08-14 14:35:44 +08:00
9ff108dcd0
Merge branch 'fix/prov_ble_read_offset_v3.3' into 'release/v3.3'
...
BLE provisioning: Add check for valid ble read offset (v3.3)
See merge request espressif/esp-idf!9747
2020-08-13 16:29:02 +08:00
0a75f2d5f8
Merge branch 'bugfix/fix_adc_dac_conflict_backportv3.3' into 'release/v3.3'
...
Driver(adc): Disable the synchronization operation function of ADC1 and DAC (backport v3.3)
See merge request espressif/esp-idf!9364
2020-08-13 09:51:25 +08:00
fbdcfc8e4a
BLE provisioning: Add check for valid ble read offset
2020-08-12 08:46:01 +00:00
7952bed766
lwip: fix udp tx packet loss issue
2020-08-12 10:38:42 +08:00
ab63b48f6f
add soft solution for esp32 eco3 live lock issue
2020-08-12 02:16:53 +00:00
cb78c1083f
bugfix: fix IPv6 memory leak issue
2020-08-11 14:19:06 +08:00
7e1c529b00
Merge branch 'bugfix/param_check_instant_tx_octets_adv_ubderrun_v3.3' into 'release/v3.3'
...
component/bt: add connect parameter, fix instant reverse, fix tx default octets, fix assert(1024,0)
See merge request espressif/esp-idf!9484
2020-08-11 14:11:03 +08:00
68ecc44d34
fix bug for ipv6 fragment
2020-08-11 09:45:02 +08:00
b244afc208
Merge branch 'feature/make_tcp_rto_configurable_v3.3' into 'release/v3.3'
...
make TCP rto time configurable (backport v3.3)
See merge request espressif/esp-idf!9610
2020-08-10 21:17:45 +08:00
bfaa14bfdd
component/bt: Fix buffer count deinit crash.
2020-08-10 11:43:54 +08:00
12d476427f
components/bt: Add api to query the number of available buffers for the current connection
2020-08-10 11:43:54 +08:00
debda4a63f
Fix ble disconnect due to instant of channel map update is too small
...
Set AFH in time
Fix ble connecting fail in coexist
2020-08-10 11:43:54 +08:00
b76f5b2ef2
Coexistence: Add coexist API to enable BLE connection dynamic priority
2020-08-10 11:43:54 +08:00
d674016d64
component/bt: add connect parameter, fix instant reverse, fix tx default octets, fix assert(1024,0), fix assert(512,0)
2020-08-10 11:43:17 +08:00
9ce137139b
bootloader: Adds bootloader_sha256_flash_contents()
2020-08-07 23:10:29 +08:00
52c089fba7
protocomm_httpd: Restart security session if request is received on a new session
...
This commit fixes a bug as well as changes a behaviour.
Bugfix: During softap/httpd based provisioning, if a session was closed
midway and a new one started, it would never proceed if the http server
assigns same socket number to the new session (which happens almost always).
Now, if a session is closed, using the http callbacks, the older session
data is cleared so that a new one can be created.
Behavioural change: If a client (mobile app particularly) does not use
persistent http session i.e. all provisioning communication on the same
socket, the provisioning may fail. Earlier, since the session context was
not getting cleared, even if the client closed a session and continued
on a new one, it would go through if the socket number assigned was same
(which happens almost always).
Ideally, from a security perspective, all communication related
to secure provisioning must happen on the same socket, and so, this
change is required.
2020-08-06 18:25:53 +00:00
035783039b
bootloader_support: Fix bootloader_common_get_sha256_of_partition, can handle a long image
...
Closes: IDFGH-3594
2020-08-05 23:21:52 +08:00
2e89f963d7
remove auto conn case because we do not support this anymore
2020-08-05 18:04:34 +08:00
593ca2255c
Merge branch 'mesh/bugfix_set_type_v3.3' into 'release/v3.3'
...
Mesh/bugfix (backport v3.3)
See merge request espressif/esp-idf!9179
2020-07-30 21:17:11 +08:00
44791067ec
Merge branch 'nimble/nrpa_support_v3.3' into 'release/v3.3'
...
NimBLE: Add Non-Resolvable private address support and misc fixes (Backport v3.3)
See merge request espressif/esp-idf!9735
2020-07-29 16:35:25 +08:00
55bb42dc63
sdmmc: fix the probe issue that forbid sdspi working in highspeed mode
...
SD cards don't support CMD7 (select_card) in SPI mode. Highspeed probe
of sdspi will fail in this step and stop working in highspeed mode.
Remove the CMD7 in enable_hs_mode_and_check to fix this issue.
Please note that, on ESP32, you have to use the IOMUX pins to use sdspi
in 40MHz, otherwise the initialization process will report reading issue
and fail.
2020-07-28 19:09:38 +08:00
fc8ba15b33
Fix init MCPWM Fault line via config struct
...
Signed-off-by: wubowen <wubowen@espressif.com>
Merges https://github.com/espressif/esp-idf/pull/5491
Closes https://github.com/espressif/esp-idf/issues/5433
2020-07-28 03:44:36 +00:00
6bbb75f219
Bluedroid: Fixes cases having fallback to link up event.
...
Signed-off-by: Chinmay Chhajed <chinmay.chhajed@espressif.com>
2020-07-27 14:08:03 +05:30
22d636b7b0
pthread: fix pthread_mutex_destroy() breaking priority inheritance
2020-07-24 14:45:48 +02:00
95e43fc2c4
FreeRTOS: add mutex hold count to task status info
2020-07-24 14:43:32 +02:00
7aab15f33d
NimBLE: Add Non-Resolvable private address support and misc bug fixes (Backport v3.3)
...
- Merges https://github.com/espressif/esp-nimble/pull/12
- Fixes repeated pairing failure in RPA feature
Closes https://github.com/espressif/esp-idf/issues/5530
2020-07-23 11:28:42 +05:30
b64f4bced8
ci: temporarily disable RS485 related tests
2020-07-22 08:46:57 +00:00
bf02206096
Merge branch 'ci/workaround_multiple_ci_failures_v3.3' into 'release/v3.3'
...
CI: workaround multiple ci failures (v3.3)
See merge request espressif/esp-idf!9687
2020-07-22 11:54:45 +08:00
e5066c9969
feat(lwip): make LWIP TCP rto time configurable
2020-07-20 07:58:06 +00:00
07942e3991
Merge branch 'bugfix/cmake_bugfixes_v3.3' into 'release/v3.3'
...
CMake-related bugfixes (v3.3)
See merge request espressif/esp-idf!8069
2020-07-20 08:43:52 +08:00
858e12a040
CI: do not run cases likely to fail
2020-07-19 15:30:15 +08:00
bfb7757feb
CI: disable cases with test env SSC_T5_1
2020-07-19 15:26:29 +08:00
9a205c654d
CI: remove incorrect MTU related cases
2020-07-19 15:23:21 +08:00
0137aef471
Merge branch 'release/v3.3' of https://github.com/espressif/esp-idf.git into release/v3.3
...
# Conflicts:
# components/bt/include/esp_bt.h
2020-07-15 12:08:17 +02:00
7ca3bc1e48
Task WDT: add method to retrieve task names for pre-crash storage
2020-07-14 19:44:39 +02:00
83fdac780c
mesh/ci: fix MESH_EST_0216
2020-07-10 17:57:36 +08:00
7c95474f6c
mesh: backport some bugfixes
...
1. If the root is specified (FIXED-ROOT) by set type or set parent, change ie.mesh_type to MESH_ROOT before connect to router.
2. Release esp_mesh_recv_toDS when the root becomes non-root.
3. esp_mesh_set_type now supports MESH_IDLE and MESH_STA.
4. Fix ie.rc_rssi is not updated during scan and vote.
5. Fix ie.mesh_type do not match ie.layer caused by parent switch.
6. Fix during root switch, the original root doesn't disconnect from the router after it receives the switch request from the new voted root. (root switch happens by invoking esp_mesh_waive_root).
7. Fix the routing announce timer is not stopped immediately in a new root if the new root is transformed from non-root.
8. Choose the candidate with less ie.assoc when doing parent switch.
2020-07-10 17:57:34 +08:00
28c0673376
ble_mesh: stack: Add two application macros for TTL
2020-07-10 09:15:56 +08:00
9eb66d49e4
ble_mesh: stack: Update send_ttl in btc when recv a msg
...
Update send_ttl mainly for server models. When a server model
receives a message, and the status is required to be replied
by the application, we need to set send_ttl to the msg context.
If send_ttl is not updated in btc, and the applcation does not
set the TTL either, then the status will be replied with TTL=0,
which may cause the client side (e.g. the phone App) failed to
receive the status.
Closes https://github.com/espressif/esp-idf/issues/5300
2020-07-10 09:15:49 +08:00
e84ad136b9
esp_https_ota.c: Add fix to return failure if (-1) is returned from esp_http_client_read
...
Closes https://github.com/espressif/esp-idf/issues/4960
2020-07-08 10:00:48 +05:30
22926742be
esp_http_client.c: In esp_http_client_read, add fix to return (-1) if esp_transport_read fails
2020-07-08 10:00:48 +05:30
9d6c3632e8
bootloader: Fix regression burning efuses late in boot process
...
APB clock get functions not included in iram_loader_seg, meaning
could be overwritten by app depending on app IRAM size and linker
layout.
Regression in dd5190868ahttps://github.com/espressif/esp-idf/issues/5456
2020-07-06 16:42:46 +10:00
4891fcea78
Merge branch 'bugfix/beacon_security_downgrade_v3.3' into 'release/v3.3'
...
Avoid parsing RSN/WPA IE's after connection (Backport v3.3)
See merge request espressif/esp-idf!9268
2020-07-03 14:32:04 +08:00
8753fb359a
ble_mesh: stack: Update some fast prov functions
2020-07-03 08:54:59 +08:00
bbf4ce8d18
ble_mesh: stack: Move fast prov functions to a single file
2020-07-03 08:54:51 +08:00
2edc576419
esp_wifi: Update wifi lib
...
1. Avoid parsing RSN/WPA IE's after connection
2. Remove AUTH_CHANGED reason code logic
2020-07-02 04:06:35 +00:00
d76a3a8372
ble_mesh: ci: Fix failing to compile when using make
2020-07-02 03:38:18 +00:00
e36105156c
ble_mesh: Mark platform related default RNG as 0
2020-07-02 03:38:18 +00:00
9060de827f
ble_mesh: Remove the previously added redundant aes files
2020-07-02 03:38:18 +00:00
8887bd5f3c
ble_mesh: Update CMake and make files for tinycrypt
2020-07-02 03:38:18 +00:00
0940f5b2c3
ble_mesh: Update tinycrypt header file include guards
...
Add BLE_MESH in the macro to make it specific for BLE Mesh.
2020-07-02 03:38:18 +00:00
d690e52993
ble_mesh: Format source and header files of tinycrypt
2020-07-02 03:38:18 +00:00
12b9f59559
ble_mesh: Port full implementation of tinycrypt [Zephyr]
...
- Original code is here: https://github.com/zephyrproject-rtos/tinycrypt
- Also this fixes the compile error when NimBLE and ESP BLE Mesh
both uses the tinycrypt.
2020-07-02 03:38:18 +00:00
44887f5fde
Driver(adc): Disable the synchronization operation function of ADC1 and DAC
...
Closes IDF-1585
2020-07-01 06:16:35 +00:00
f835011e2f
ble_mesh: stack: Fix compile error when only proxy enabled
...
Also remove some redundant CONFIG_BLE_MESH_PROXY checks, because
when the following options are satisfied, the CONFIG_BLE_MESH_PROXY
option will be selected mandatorily.
2020-07-01 12:32:04 +08:00
021e23ebf7
Merge branch 'bugfix/ble_mesh_check_subnet_before_update_beacon_sent_v3.3' into 'release/v3.3'
...
ble_mesh: Check if subnet exists before updating beacon_sent (v3.3)
See merge request espressif/esp-idf!9398
2020-07-01 11:17:08 +08:00
31b52a5c05
Merge branch 'bugfix/ble_mesh_set_recv_rssi_v3.3' into 'release/v3.3'
...
Bugfix/ble mesh set recv rssi (v3.3)
See merge request espressif/esp-idf!9392
2020-07-01 11:15:48 +08:00
46bc9e5dc4
Merge branch 'feature/bt_secure_conn_downgrade_check_v3.3' into 'release/v3.3'
...
Bluedroid: Authentication fixes in Legacy and Secure Connection.
See merge request espressif/esp-idf!9332
2020-06-30 15:12:21 +08:00
9f6375db50
ble_mesh: Check if subnet exists before updating beacon_sent
...
- Before updating the "beacon_sent" of a subnet, we need to check
if the subnet still exists, especially for a Provisioner.
- Fix a bug which will cause Provisioner failed to send Secure
Network Beacon if no device is provisioned
2020-06-30 09:23:28 +08:00
96865524c7
ble_mesh: stack: Copy recv_rssi for other received messages
...
Follow the commit: 2b80cb6883
2020-06-30 09:06:42 +08:00
86cad8b825
When a generic mesh model message is received "bt_mesh_generic_server_cb_evt_to_btc" copies the
...
ctx values to cb_params for the mesh stack.
recv_rssi was not copied.
This means the rssi could not be read when receiving generic server messages using ble_mesh.
2020-06-30 09:06:31 +08:00
d6a63531ce
Merge branch 'bugfix/http_server_lru_v3.3' into 'release/v3.3'
...
esp_http_server: Update LRU counter on accepting a new connection (v3.3)
See merge request espressif/esp-idf!9353
2020-06-29 12:57:43 +08:00
370bb55f42
Merge branch 'bugfix/ble_mesh_get_node_with_name_v3.3' into 'release/v3.3'
...
ble_mesh: Get node info with pre-configured node name (v3.3)
See merge request espressif/esp-idf!9304
2020-06-28 20:25:13 +08:00
1fb6ffecad
Merge branch 'bugfix/ble_mesh_bt_hex_v3.3' into 'release/v3.3'
...
ble_mesh: Fix wrong log output with bt_hex (v3.3)
See merge request espressif/esp-idf!9311
2020-06-28 20:23:56 +08:00
036828a172
Merge branch 'bugfix/ble_mesh_not_define_bool_v3.3' into 'release/v3.3'
...
Bugfix/ble mesh not define bool (v3.3)
See merge request espressif/esp-idf!9318
2020-06-28 20:22:50 +08:00
673e433281
esp_http_server: Update LRU counter on accepting a new connection
...
Closes https://github.com/espressif/esp-idf/issues/3851
2020-06-26 19:25:42 +05:30
99d572700d
Bluedroid: Authentication fixes in Legacy and Secure Connection.
...
Prevent a remote device from doing a Bluetooth Impersonation Attack
(BIAS) by:
- Preventing remote device to downgrade secure connection
feature mask. Secure connection feature mask should remain same or
increase to enabled in link key generation and authentication.
- Doing a mutual authentication during Legacy Authentication.
2020-06-25 13:59:14 +00:00
ad970addf0
ble_mesh: Get node info with pre-configured node name
...
Also add a function to get the entry of the nodes table.
Closes https://github.com/espressif/esp-idf/issues/5397
2020-06-24 11:53:59 +00:00
adbc337023
ble_mesh: Fix wrong log output with bt_hex
...
- This issue was introduced in the commit: a788e7cd3d
2020-06-24 11:50:58 +00:00
1dbbc55cc0
ble_mesh: Remove boolean type definitions
2020-06-24 11:46:51 +00:00
0526de4536
ble_mesh: Do not #define bool when compiling in C++
2020-06-24 11:46:51 +00:00
366dd9759d
ble_mesh: stack: Check model status with variable length
2020-06-24 11:41:58 +00:00
39e5184159
Merge branch 'bugfix/fix_event_bug_in_GAP_API_release_v3.3' into 'release/v3.3'
...
Bugfix/fix event bug in GAP API [backport v3.3]
See merge request espressif/esp-idf!9195
2020-06-23 12:19:04 +08:00
e3f3e0ae0f
Merge branch 'feature/ws_timeout_v3.3' into 'release/v3.3'
...
websocket: add configurable timeout for PONG not received (v3.3)
See merge request espressif/esp-idf!8911
2020-06-19 02:22:08 +08:00
2ea53169ad
Merge branch 'bugfix/blufi_buffer_overflow_report_v3.3' into 'release/v3.3'
...
blufi: When the format of the received data packet is wrong, reply with an error response(backport 3.3)
See merge request espressif/esp-idf!9198
2020-06-18 13:45:34 +08:00
2aaf254d44
Merge branch 'bugfix/fix_fifo_cnt_bug_v3.3' into 'release/v3.3'
...
bugfix(uart): fix esp32 uart fifo_cnt bug(backport v3.3)
See merge request espressif/esp-idf!9042
2020-06-18 01:43:04 +08:00
e25b710a02
Merge branch 'bugfix/ws_send_abort_v3.3' into 'release/v3.3'
...
websocket client: the client now aborts the connection if send fails (v3.3)
See merge request espressif/esp-idf!8903
2020-06-17 15:05:48 +08:00
563c9901ca
blufi: When the format of the received data packet is wrong, reply with an error response
2020-06-17 12:32:57 +08:00
02f9eaa31a
components/bt: Adjust the description of `esp_bt_gap_start_discovery` and `esp_bt_gap_cancel_discovery`.
...
Add some comments to explain why `ESP_BT_GAP_DISC_STATE_CHANGED_EVT` is not reported.
2020-06-17 11:27:37 +08:00
b478dc4ad6
websocket: add configurable timeout for PONG not received
...
Closes IDF-1744
2020-06-17 11:13:26 +08:00
c9d9545310
bugfix(uart): fix esp32 uart fifo_cnt bug
...
When using DPort to read fifo, fifo_cnt is not credible, we need to calculate the real cnt based on the fifo read and write pointer. When using AHB to read FIFO, we can use fifo_cnt to indicate the data length in fifo.
2020-06-15 12:22:33 +08:00
9024cd38ec
Logging: avoid blocking in timer context
2020-06-13 14:22:21 +02:00
5e84ee108c
Merge branch 'bugfix/bootloader_efuse_build_regression_v3.3' into 'release/v3.3'
...
bootloader: add definition of esp_clk_apb_freq (v3.3)
See merge request espressif/esp-idf!9093
2020-06-10 16:01:35 +08:00
f17f59fb54
Merge branch 'bugfix/parttool_get_info_wo_info_option_v3.3' into 'release/v3.3'
...
partition_table: Fix parttool.py crashes when retrieving partition info (v3.3)
See merge request espressif/esp-idf!9065
2020-06-10 15:58:01 +08:00
282433500e
Backport MR from baid proj
2020-06-10 03:53:21 +00:00
618794e1fb
bootloader: add definition of esp_clk_apb_freq
...
Commit 8cd04c80https://esp32.com/viewtopic.php?f=13&t=12035
Closes: https://github.com/espressif/esp-idf/issues/5396
2020-06-08 16:45:29 +08:00
eaca5a11e4
Merge branch 'bugfix/authmode_degrade_fix_v3.3' into 'release/v3.3'
...
esp_wifi: Remove auth_changed event and fix wpa2_ent authmode threshold (backport 3.3)
See merge request espressif/esp-idf!9058
2020-06-05 13:59:48 +08:00
b4c89c6607
Merge branch 'bugfix/add_so_linger_to_menuconfig_for_3.3' into 'release/v3.3'
...
lw-ip:add LINGER to menuconfig(backport 3.3)
See merge request espressif/esp-idf!9062
2020-06-05 13:54:22 +08:00
a5a6ba895e
Merge branch 'optimization/DNS_get_function_for_3.3' into 'release/v3.3'
...
lw-ip:optimization DNS get function(backport 3.3)
See merge request espressif/esp-idf!9061
2020-06-05 13:54:07 +08:00
b336851479
Merge branch 'workaround/wps_iot_fixes_v3.3' into 'release/v3.3'
...
wpa_supplicant: WPS Inter operatability Fixes ( backport v3.3)
See merge request espressif/esp-idf!9060
2020-06-05 13:49:24 +08:00
Island
Michael (XIAO Xufeng)
lly
Ivan Grokhotkov
Jakob Hasse
Angus Gratton
Wielebny666
Jiang Jiang Jian
Roland Dobai
ronghulin
He Yin Ling
Mahavir Jain
Angus Gratton
weitianhua
zhangyanjiao
dongyou
houwenxiang
Chen Yi Qun
Prasad Alatkar
xiehang
Li Shuai
xueyunfei
Wang Cheng
baohongde
KonstantinKondrashov
Piyush Shah
Hou Chen Yao
Chinmay Chhajed
Michael Balzer
aleks
yuanjm
chenyudong
Shubham Kulkarni
Nachiket Kukade
fuzhibo
mbroek
Nikolaos Strikos
David Čermák
liqigan
Marius Vikhammer
xiongyu