Merge branch 'feature/add_long_range_code' into 'master'

example: add long range code

See merge request idf/esp-idf!3552
This commit is contained in:
Jiang Jiang Jian 2018-11-26 17:03:09 +08:00
commit 90a6c9aada
3 changed files with 14 additions and 1 deletions

View file

@ -44,6 +44,9 @@ make menuconfig
The sending device and the recving device must be on the same channel. The sending device and the recving device must be on the same channel.
* Set Send count and Send delay under Example Configuration Options. * Set Send count and Send delay under Example Configuration Options.
* Set Send len under Example Configuration Options. * Set Send len under Example Configuration Options.
* Set Enable Long Range Options.
When this parameter is enabled, the ESP32 device will send data at the PHY rate of 512Kbps or 256Kbps
then the data can be transmitted over long range between two ESP32 devices.
### Build and Flash ### Build and Flash

View file

@ -48,8 +48,14 @@ config ESPNOW_SEND_DELAY
config ESPNOW_SEND_LEN config ESPNOW_SEND_LEN
int "Send len" int "Send len"
range 10 250 range 10 250
default 200 default 10
help help
Length of ESPNOW data to be sent, unit: byte. Length of ESPNOW data to be sent, unit: byte.
config ENABLE_LONG_RANGE
bool "Enable Long Range"
default "n"
help
When enable long range, the PHY rate of ESP32 will be 512Kbps or 256Kbps
endmenu endmenu

View file

@ -67,6 +67,10 @@ static void example_wifi_init(void)
* been already on the same channel. * been already on the same channel.
*/ */
ESP_ERROR_CHECK( esp_wifi_set_channel(CONFIG_ESPNOW_CHANNEL, 0) ); ESP_ERROR_CHECK( esp_wifi_set_channel(CONFIG_ESPNOW_CHANNEL, 0) );
#if CONFIG_ENABLE_LONG_RANGE
ESP_ERROR_CHECK( esp_wifi_set_protocol(ESPNOW_WIFI_IF, WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_LR) );
#endif
} }
/* ESPNOW sending or receiving callback function is called in WiFi task. /* ESPNOW sending or receiving callback function is called in WiFi task.