Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Update README.md

Browse source
This commit is contained in:
Hou Wen Xiang 2018-07-15 12:56:23 +08:00
parent fe238af249
commit 733f73067c
1 changed files with 22 additions and 19 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

41
examples/peripherals/rmt_tx/README.md
View file

@ -1,4 +1,4 @@
# _RMT Transmit Example_
# _RMT Transmit Example_
(See the README.md file in the upper level 'examples' directory for more information about examples.)
@ -8,7 +8,24 @@ This example will shows how to configure and operate the remote control (RMT) pe
### Hardware Required
To run this example, you need to prepare a development board with esp32 SoC(e.g., ESP32_Core_board, ESP-WORVER_KIT etc), a LED, a speaker or an earphone and a USB cable for power supply and programming.
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WORVER-KIT, etc.)
* A USB cable for Power supply and programming
* A LED, a speaker or an earphone
Connection :
```
330R LED
GPIO18 +----/\/\/\----+------|>|-----+ GND
|
| /|
+-+ | Speaker
| | | or
+-+ | earphone
| \|
|
+--------------+ GND
```
### Configure the Project
@ -34,20 +51,6 @@ See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/l
To be able to see and hear the message output by the RMT, connect a LED and a speaker or an earphone (be careful - it may be loud) to the GPIO18(the pin can be changed by modify the definition of `RMT_TX_GPIO` in `main/rmt_tx_main.c`).
```
330R LED
GPIO18 +----/\/\/\----+------|>|-----+ GND
|
| /|
+-+ | Speaker
| | | or
+-+ | earphone
| \|
|
+--------------+ GND
```
Run this example, you will see the following output log:
```
RMT Tx: Transmission complete
@ -58,7 +61,7 @@ RMT Tx: Sample transmission complete
* Programming fail
* To check whether the hardware connection is correct, you can run `make monitor` and reboot your board to see if there are any output logs.
* Your download baud-rate is too high. please lower your download baud-rate in menuconfig and try again.
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
If any problems that can't be resolved, please open an issue in GitHub(https://github.com/espressif/esp-idf/issues), we will reply to you soon.
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.