Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Update README.md

Browse source
This commit is contained in:
Hou Wen Xiang 2018-07-15 12:52:55 +08:00
parent cb8ab7c6a8
commit fe238af249
1 changed files with 6 additions and 9 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
examples/peripherals/rmt_nec_tx_rx/README.md
View file

@ -1,8 +1,4 @@
# Example: rmt_nec_tx_rx
This example uses the remote control (RMT) peripheral to transmit and receive codes for the NEC infrared remote protocol.
# _RMT NEC_TX_RX Example_
# _RMT NEC_TX_RX Example_
(See the README.md file in the upper level 'examples' directory for more information about examples.)
@ -12,7 +8,8 @@ This example uses the remote control (RMT) peripheral to transmit and receive co
### Hardware Required
To run this example, you need to prepare a development board with esp32 SoC(e.g., ESP32_Core_board, ESP-WORVER_KIT etc) and a USB cable for power supply and programming.
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WORVER-KIT, etc.)
* A USB cable for Power supply and programming
By default, this example runs a self test which assumes the TX pin (GPIO18) and RX pin (GPIO19) are _connected together_.
@ -77,7 +74,7 @@ NEC: RMT RCV --- addr: 0xda25 cmd: 0xeb14
* Programming fail
* To check whether the hardware connection of UART is correct, you can run `make monitor` and reboot your board to see if there are any output logs.
* Your download baud-rate is too high. please lower your download baud-rate in menuconfig and try again.
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
If any problems that can't be resolved, please open an issue in GitHub(https://github.com/espressif/esp-idf/issues), we will reply to you soon.
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.