OVMS3-idf/components/bootloader/Kconfig.projbuild

398 lines
17 KiB
Text
Raw Normal View History

menu "Bootloader config"
choice LOG_BOOTLOADER_LEVEL
bool "Bootloader log verbosity"
default LOG_BOOTLOADER_LEVEL_INFO
help
Specify how much output to see in bootloader logs.
config LOG_BOOTLOADER_LEVEL_NONE
bool "No output"
config LOG_BOOTLOADER_LEVEL_ERROR
bool "Error"
config LOG_BOOTLOADER_LEVEL_WARN
bool "Warning"
config LOG_BOOTLOADER_LEVEL_INFO
bool "Info"
config LOG_BOOTLOADER_LEVEL_DEBUG
bool "Debug"
config LOG_BOOTLOADER_LEVEL_VERBOSE
bool "Verbose"
endchoice
config LOG_BOOTLOADER_LEVEL
int
default 0 if LOG_BOOTLOADER_LEVEL_NONE
default 1 if LOG_BOOTLOADER_LEVEL_ERROR
default 2 if LOG_BOOTLOADER_LEVEL_WARN
default 3 if LOG_BOOTLOADER_LEVEL_INFO
default 4 if LOG_BOOTLOADER_LEVEL_DEBUG
default 5 if LOG_BOOTLOADER_LEVEL_VERBOSE
config BOOTLOADER_SPI_WP_PIN
int "SPI Flash WP Pin when customising pins via efuse (read help)"
range 0 33
default 7
depends on FLASHMODE_QIO || FLASHMODE_QOUT
help
This value is ignored unless flash mode is set to QIO or QOUT *and* the SPI flash pins have been
overriden by setting the efuses SPI_PAD_CONFIG_xxx.
When this is the case, the Efuse config only defines 3 of the 4 Quad I/O data pins. The WP pin (aka ESP32
pin "SD_DATA_3" or SPI flash pin "IO2") is not specified in Efuse. That pin number is compiled into the bootloader
instead.
The default value (GPIO 7) is correct for WP pin on ESP32-D2WD integrated flash.
choice BOOTLOADER_VDDSDIO_BOOST
bool "VDDSDIO LDO voltage"
default BOOTLOADER_VDDSDIO_BOOST_1_9V
help
If this option is enabled, and VDDSDIO LDO is set to 1.8V (using EFUSE
or MTDI bootstrapping pin), bootloader will change LDO settings to
output 1.9V instead. This helps prevent flash chip from browning out
during flash programming operations.
This option has no effect if VDDSDIO is set to 3.3V, or if the internal
VDDSDIO regulator is disabled via efuse.
config BOOTLOADER_VDDSDIO_BOOST_1_8V
bool "1.8V"
depends on !ESPTOOLPY_FLASHFREQ_80M
config BOOTLOADER_VDDSDIO_BOOST_1_9V
bool "1.9V"
endchoice
config BOOTLOADER_FACTORY_RESET
bool "GPIO triggers factory reset"
default N
help
Allows to reset the device to factory settings:
- clear one or more data partitions;
- boot from "factory" partition.
The factory reset will occur if there is a GPIO input pulled low while device starts up.
See settings below.
config BOOTLOADER_NUM_PIN_FACTORY_RESET
int "Number of the GPIO input for factory reset"
depends on BOOTLOADER_FACTORY_RESET
range 0 39
default 4
help
The selected GPIO will be configured as an input with internal pull-up enabled.
To trigger a factory reset, this GPIO must be pulled low on reset.
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
config BOOTLOADER_OTA_DATA_ERASE
bool "Clear OTA data on factory reset (select factory partition)"
depends on BOOTLOADER_FACTORY_RESET
help
The device will boot from "factory" partition (or OTA slot 0 if no factory partition is present) after a factory reset.
config BOOTLOADER_DATA_FACTORY_RESET
string "Comma-separated names of partitions to clear on factory reset"
depends on BOOTLOADER_FACTORY_RESET
default "nvs"
help
Allows customers to select which data partitions will be erased while factory reset.
Specify the names of partitions as a comma-delimited with optional spaces for readability. (Like this: "nvs, phy_init, ...")
Make sure that the name specified in the partition table and here are the same.
Partitions of type "app" cannot be specified here.
config BOOTLOADER_APP_TEST
bool "GPIO triggers boot from test app partition"
default N
help
Allows to run the test app from "TEST" partition.
A boot from "test" partition will occur if there is a GPIO input pulled low while device starts up.
See settings below.
config BOOTLOADER_NUM_PIN_APP_TEST
int "Number of the GPIO input to boot TEST partition"
depends on BOOTLOADER_APP_TEST
range 0 39
default 18
help
The selected GPIO will be configured as an input with internal pull-up enabled.
To trigger a test app, this GPIO must be pulled low on reset.
After the GPIO input is deactivated and the device reboots, the old application will boot.
(factory or OTA[x]).
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
config BOOTLOADER_HOLD_TIME_GPIO
int "Hold time of GPIO for reset/test mode (seconds)"
depends on BOOTLOADER_FACTORY_RESET || BOOTLOADER_APP_TEST
default 5
help
The GPIO must be held low continuously for this period of time after reset
before a factory reset or test partition boot (as applicable) is performed.
endmenu # Bootloader
menu "Security features"
# These three are the actual options to check in code,
# selected by the displayed options
config SECURE_SIGNED_ON_BOOT
bool
default y
depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
config SECURE_SIGNED_ON_UPDATE
bool
default y
depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
config SECURE_SIGNED_APPS
bool
default y
depends on SECURE_SIGNED_ON_BOOT || SECURE_SIGNED_ON_UPDATE
config SECURE_SIGNED_APPS_NO_SECURE_BOOT
bool "Require signed app images"
default n
depends on !SECURE_BOOT_ENABLED
help
Require apps to be signed to verify their integrity.
This option uses the same app signature scheme as hardware secure boot, but unlike hardware secure boot it does not prevent the bootloader from being physically updated. This means that the device can be secured against remote network access, but not physical access. Compared to using hardware Secure Boot this option is much simpler to implement.
config SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
bool "Bootloader verifies app signatures"
default n
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
help
If this option is set, the bootloader will be compiled with code to verify that an app is signed before booting it.
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
If hardware secure boot is not enabled, this option doesn't add significant security by itself so most users will want to leave it disabled.
config SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
bool "Verify app signature on update"
default y
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
help
If this option is set, any OTA updated apps will have the signature verified before being considered valid.
When enabled, the signature is automatically checked whenever the esp_ota_ops.h APIs are used for OTA updates,
or esp_image_format.h APIs are used to verify apps.
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
If hardware secure boot is not enabled, this option still adds significant security against network-based attackers by preventing spoofing of OTA updates.
config SECURE_BOOT_ENABLED
bool "Enable hardware secure boot in bootloader (READ DOCS FIRST)"
default n
help
Build a bootloader which enables secure boot on first boot.
Once enabled, secure boot will not boot a modified bootloader. The bootloader will only load a partition table or boot an app if the data has a verified digital signature. There are implications for reflashing updated apps once secure boot is enabled.
When enabling secure boot, JTAG and ROM BASIC Interpreter are permanently disabled by default.
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
choice SECURE_BOOTLOADER_MODE
bool "Secure bootloader mode"
depends on SECURE_BOOT_ENABLED
default SECURE_BOOTLOADER_ONE_TIME_FLASH
config SECURE_BOOTLOADER_ONE_TIME_FLASH
bool "One-time flash"
help
On first boot, the bootloader will generate a key which is not readable externally or by software. A digest is generated from the bootloader image itself. This digest will be verified on each subsequent boot.
Enabling this option means that the bootloader cannot be changed after the first time it is booted.
config SECURE_BOOTLOADER_REFLASHABLE
bool "Reflashable"
help
Generate a reusable secure bootloader key, derived (via SHA-256) from the secure boot signing key.
This allows the secure bootloader to be re-flashed by anyone with access to the secure boot signing key.
This option is less secure than one-time flash, because a leak of the digest key from one device allows reflashing of any device that uses it.
endchoice
config SECURE_BOOT_BUILD_SIGNED_BINARIES
bool "Sign binaries during build"
depends on SECURE_SIGNED_APPS
default y
help
Once secure boot or signed app requirement is enabled, app images are required to be signed.
If enabled (default), these binary files are signed as part of the build process. The file named in "Secure boot private signing key" will be used to sign the image.
If disabled, unsigned app/partition data will be built. They must be signed manually using espsecure.py (for example, on a remote signing server.)
config SECURE_BOOT_SIGNING_KEY
string "Secure boot private signing key"
depends on SECURE_BOOT_BUILD_SIGNED_BINARIES
default secure_boot_signing_key.pem
help
Path to the key file used to sign app images.
Key file is an ECDSA private key (NIST256p curve) in PEM format.
Path is evaluated relative to the project directory.
You can generate a new signing key by running the following command:
espsecure.py generate_signing_key secure_boot_signing_key.pem
See docs/security/secure-boot.rst for details.
config SECURE_BOOT_VERIFICATION_KEY
string "Secure boot public signature verification key"
depends on SECURE_SIGNED_APPS && !SECURE_BOOT_BUILD_SIGNED_BINARIES
default signature_verification_key.bin
help
Path to a public key file used to verify signed images. This key is compiled into the bootloader and/or app,
to verify app images.
Key file is in raw binary format, and can be extracted from a
PEM formatted private key using the espsecure.py
extract_public_key command.
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
choice SECURE_BOOTLOADER_KEY_ENCODING
bool "Hardware Key Encoding"
depends on SECURE_BOOTLOADER_REFLASHABLE
default SECURE_BOOTLOADER_NO_ENCODING
help
In reflashable secure bootloader mode, a hardware key is derived from the signing key (with SHA-256) and can be written to efuse
with espefuse.py.
Normally this is a 256-bit key, but if 3/4 Coding Scheme is used on the device then the efuse key is truncated to 192 bits.
This configuration item doesn't change any firmware code, it only changes the size of key binary which is generated at build time.
config SECURE_BOOTLOADER_KEY_ENCODING_256BIT
bool "No encoding (256 bit key)"
config SECURE_BOOTLOADER_KEY_ENCODING_192BIT
bool "3/4 encoding (192 bit key)"
endchoice
config SECURE_BOOT_INSECURE
bool "Allow potentially insecure options"
depends on SECURE_BOOT_ENABLED
default N
help
You can disable some of the default protections offered by secure boot, in order to enable testing or a custom combination of security features.
Only enable these options if you are very sure.
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
config FLASH_ENCRYPTION_ENABLED
bool "Enable flash encryption on boot (READ DOCS FIRST)"
default N
help
If this option is set, flash contents will be encrypted by the bootloader on first boot.
Note: After first boot, the system will be permanently encrypted. Re-flashing an encrypted
system is complicated and not always possible.
Read https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html before enabling.
config FLASH_ENCRYPTION_INSECURE
bool "Allow potentially insecure options"
depends on FLASH_ENCRYPTION_ENABLED
default N
help
You can disable some of the default protections offered by flash encryption, in order to enable testing or a custom combination of security features.
Only enable these options if you are very sure.
Refer to docs/security/secure-boot.rst and docs/security/flash-encryption.rst for details.
menu "Potentially insecure options"
visible if FLASH_ENCRYPTION_INSECURE || SECURE_BOOT_INSECURE
# NOTE: Options in this menu NEED to have SECURE_BOOT_INSECURE
# and/or FLASH_ENCRYPTION_INSECURE in "depends on", as the menu
# itself doesn't enable/disable its children (if it's not set,
# it's possible for the insecure menu to be disabled but the insecure option
# to remain on which is very bad.)
config SECURE_BOOT_ALLOW_ROM_BASIC
bool "Leave ROM BASIC Interpreter available on reset"
depends on SECURE_BOOT_INSECURE || FLASH_ENCRYPTION_INSECURE
default N
help
By default, the BASIC ROM Console starts on reset if no valid bootloader is
read from the flash.
When either flash encryption or secure boot are enabled, the default is to
disable this BASIC fallback mode permanently via efuse.
If this option is set, this efuse is not burned and the BASIC ROM Console may
remain accessible. Only set this option in testing environments.
config SECURE_BOOT_ALLOW_JTAG
bool "Allow JTAG Debugging"
depends on SECURE_BOOT_INSECURE || FLASH_ENCRYPTION_INSECURE
default N
help
If not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot when either secure boot or flash encryption is enabled.
Setting this option leaves JTAG on for debugging, which negates all protections of flash encryption and some of the protections of secure boot.
Only set this option in testing environments.
config SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
bool "Allow app partition length not 64KB aligned"
depends on SECURE_BOOT_INSECURE
help
If not set (default), app partition size must be a multiple of 64KB. App images are padded to 64KB length, and the bootloader checks any trailing bytes after the signature (before the next 64KB boundary) have not been written. This is because flash cache maps entire 64KB pages into the address space. This prevents an attacker from appending unverified data after the app image in the flash, causing it to be mapped into the address space.
Setting this option allows the app partition length to be unaligned, and disables padding of the app image to this length. It is generally not recommended to set this option, unless you have a legacy partitioning scheme which doesn't support 64KB aligned partition lengths.
config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_ENCRYPT
bool "Leave UART bootloader encryption enabled"
depends on FLASH_ENCRYPTION_INSECURE
default N
help
If not set (default), the bootloader will permanently disable UART bootloader encryption access on first boot. If set, the UART bootloader will still be able to access hardware encryption.
It is recommended to only set this option in testing environments.
config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_DECRYPT
bool "Leave UART bootloader decryption enabled"
depends on FLASH_ENCRYPTION_INSECURE
default N
help
If not set (default), the bootloader will permanently disable UART bootloader decryption access on first boot. If set, the UART bootloader will still be able to access hardware decryption.
Only set this option in testing environments. Setting this option allows complete bypass of flash encryption.
config FLASH_ENCRYPTION_UART_BOOTLOADER_ALLOW_CACHE
bool "Leave UART bootloader flash cache enabled"
depends on FLASH_ENCRYPTION_INSECURE
default N
help
If not set (default), the bootloader will permanently disable UART bootloader flash cache access on first boot. If set, the UART bootloader will still be able to access the flash cache.
Only set this option in testing environments.
config SECURE_BOOT_TEST_MODE
bool "Secure boot test mode: don't permanently set any efuses"
depends on SECURE_BOOT_INSECURE
default N
help
If this option is set, all permanent secure boot changes (via Efuse) are disabled.
Log output will state changes which would be applied, but they will not be.
This option is for testing purposes only - it completely disables secure boot protection.
endmenu # Potentially Insecure
endmenu # Security features