OVMS3-idf/components/esp32/include/soc/pcnt_reg.h

1497 lines
82 KiB
C
Raw Normal View History

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_PCNT_REG_H_
#define _SOC_PCNT_REG_H_
#include "soc.h"
#define PCNT_U0_CONF0_REG (DR_REG_PCNT_BASE + 0x0000)
/* PCNT_CH1_LCTRL_MODE_U0 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U0 0x00000003
#define PCNT_CH1_LCTRL_MODE_U0_M ((PCNT_CH1_LCTRL_MODE_U0_V)<<(PCNT_CH1_LCTRL_MODE_U0_S))
#define PCNT_CH1_LCTRL_MODE_U0_V 0x3
#define PCNT_CH1_LCTRL_MODE_U0_S 30
/* PCNT_CH1_HCTRL_MODE_U0 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U0 0x00000003
#define PCNT_CH1_HCTRL_MODE_U0_M ((PCNT_CH1_HCTRL_MODE_U0_V)<<(PCNT_CH1_HCTRL_MODE_U0_S))
#define PCNT_CH1_HCTRL_MODE_U0_V 0x3
#define PCNT_CH1_HCTRL_MODE_U0_S 28
/* PCNT_CH1_POS_MODE_U0 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit0. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U0 0x00000003
#define PCNT_CH1_POS_MODE_U0_M ((PCNT_CH1_POS_MODE_U0_V)<<(PCNT_CH1_POS_MODE_U0_S))
#define PCNT_CH1_POS_MODE_U0_V 0x3
#define PCNT_CH1_POS_MODE_U0_S 26
/* PCNT_CH1_NEG_MODE_U0 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit0. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U0 0x00000003
#define PCNT_CH1_NEG_MODE_U0_M ((PCNT_CH1_NEG_MODE_U0_V)<<(PCNT_CH1_NEG_MODE_U0_S))
#define PCNT_CH1_NEG_MODE_U0_V 0x3
#define PCNT_CH1_NEG_MODE_U0_S 24
/* PCNT_CH0_LCTRL_MODE_U0 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U0 0x00000003
#define PCNT_CH0_LCTRL_MODE_U0_M ((PCNT_CH0_LCTRL_MODE_U0_V)<<(PCNT_CH0_LCTRL_MODE_U0_S))
#define PCNT_CH0_LCTRL_MODE_U0_V 0x3
#define PCNT_CH0_LCTRL_MODE_U0_S 22
/* PCNT_CH0_HCTRL_MODE_U0 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U0 0x00000003
#define PCNT_CH0_HCTRL_MODE_U0_M ((PCNT_CH0_HCTRL_MODE_U0_V)<<(PCNT_CH0_HCTRL_MODE_U0_S))
#define PCNT_CH0_HCTRL_MODE_U0_V 0x3
#define PCNT_CH0_HCTRL_MODE_U0_S 20
/* PCNT_CH0_POS_MODE_U0 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit0. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U0 0x00000003
#define PCNT_CH0_POS_MODE_U0_M ((PCNT_CH0_POS_MODE_U0_V)<<(PCNT_CH0_POS_MODE_U0_S))
#define PCNT_CH0_POS_MODE_U0_V 0x3
#define PCNT_CH0_POS_MODE_U0_S 18
/* PCNT_CH0_NEG_MODE_U0 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit0. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U0 0x00000003
#define PCNT_CH0_NEG_MODE_U0_M ((PCNT_CH0_NEG_MODE_U0_V)<<(PCNT_CH0_NEG_MODE_U0_S))
#define PCNT_CH0_NEG_MODE_U0_V 0x3
#define PCNT_CH0_NEG_MODE_U0_S 16
/* PCNT_THR_THRES1_EN_U0 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit0's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U0 (BIT(15))
#define PCNT_THR_THRES1_EN_U0_M (BIT(15))
#define PCNT_THR_THRES1_EN_U0_V 0x1
#define PCNT_THR_THRES1_EN_U0_S 15
/* PCNT_THR_THRES0_EN_U0 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit0's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U0 (BIT(14))
#define PCNT_THR_THRES0_EN_U0_M (BIT(14))
#define PCNT_THR_THRES0_EN_U0_V 0x1
#define PCNT_THR_THRES0_EN_U0_S 14
/* PCNT_THR_L_LIM_EN_U0 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit0's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U0 (BIT(13))
#define PCNT_THR_L_LIM_EN_U0_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U0_V 0x1
#define PCNT_THR_L_LIM_EN_U0_S 13
/* PCNT_THR_H_LIM_EN_U0 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit0's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U0 (BIT(12))
#define PCNT_THR_H_LIM_EN_U0_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U0_V 0x1
#define PCNT_THR_H_LIM_EN_U0_S 12
/* PCNT_THR_ZERO_EN_U0 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit0's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U0 (BIT(11))
#define PCNT_THR_ZERO_EN_U0_M (BIT(11))
#define PCNT_THR_ZERO_EN_U0_V 0x1
#define PCNT_THR_ZERO_EN_U0_S 11
/* PCNT_FILTER_EN_U0 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit0.*/
#define PCNT_FILTER_EN_U0 (BIT(10))
#define PCNT_FILTER_EN_U0_M (BIT(10))
#define PCNT_FILTER_EN_U0_V 0x1
#define PCNT_FILTER_EN_U0_S 10
/* PCNT_FILTER_THRES_U0 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit0.*/
#define PCNT_FILTER_THRES_U0 0x000003FF
#define PCNT_FILTER_THRES_U0_M ((PCNT_FILTER_THRES_U0_V)<<(PCNT_FILTER_THRES_U0_S))
#define PCNT_FILTER_THRES_U0_V 0x3FF
#define PCNT_FILTER_THRES_U0_S 0
#define PCNT_U0_CONF1_REG (DR_REG_PCNT_BASE + 0x0004)
/* PCNT_CNT_THRES1_U0 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit0.*/
#define PCNT_CNT_THRES1_U0 0x0000FFFF
#define PCNT_CNT_THRES1_U0_M ((PCNT_CNT_THRES1_U0_V)<<(PCNT_CNT_THRES1_U0_S))
#define PCNT_CNT_THRES1_U0_V 0xFFFF
#define PCNT_CNT_THRES1_U0_S 16
/* PCNT_CNT_THRES0_U0 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit0.*/
#define PCNT_CNT_THRES0_U0 0x0000FFFF
#define PCNT_CNT_THRES0_U0_M ((PCNT_CNT_THRES0_U0_V)<<(PCNT_CNT_THRES0_U0_S))
#define PCNT_CNT_THRES0_U0_V 0xFFFF
#define PCNT_CNT_THRES0_U0_S 0
#define PCNT_U0_CONF2_REG (DR_REG_PCNT_BASE + 0x0008)
/* PCNT_CNT_L_LIM_U0 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit0.*/
#define PCNT_CNT_L_LIM_U0 0x0000FFFF
#define PCNT_CNT_L_LIM_U0_M ((PCNT_CNT_L_LIM_U0_V)<<(PCNT_CNT_L_LIM_U0_S))
#define PCNT_CNT_L_LIM_U0_V 0xFFFF
#define PCNT_CNT_L_LIM_U0_S 16
/* PCNT_CNT_H_LIM_U0 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit0.*/
#define PCNT_CNT_H_LIM_U0 0x0000FFFF
#define PCNT_CNT_H_LIM_U0_M ((PCNT_CNT_H_LIM_U0_V)<<(PCNT_CNT_H_LIM_U0_S))
#define PCNT_CNT_H_LIM_U0_V 0xFFFF
#define PCNT_CNT_H_LIM_U0_S 0
#define PCNT_U1_CONF0_REG (DR_REG_PCNT_BASE + 0x000c)
/* PCNT_CH1_LCTRL_MODE_U1 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U1 0x00000003
#define PCNT_CH1_LCTRL_MODE_U1_M ((PCNT_CH1_LCTRL_MODE_U1_V)<<(PCNT_CH1_LCTRL_MODE_U1_S))
#define PCNT_CH1_LCTRL_MODE_U1_V 0x3
#define PCNT_CH1_LCTRL_MODE_U1_S 30
/* PCNT_CH1_HCTRL_MODE_U1 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U1 0x00000003
#define PCNT_CH1_HCTRL_MODE_U1_M ((PCNT_CH1_HCTRL_MODE_U1_V)<<(PCNT_CH1_HCTRL_MODE_U1_S))
#define PCNT_CH1_HCTRL_MODE_U1_V 0x3
#define PCNT_CH1_HCTRL_MODE_U1_S 28
/* PCNT_CH1_POS_MODE_U1 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit1. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U1 0x00000003
#define PCNT_CH1_POS_MODE_U1_M ((PCNT_CH1_POS_MODE_U1_V)<<(PCNT_CH1_POS_MODE_U1_S))
#define PCNT_CH1_POS_MODE_U1_V 0x3
#define PCNT_CH1_POS_MODE_U1_S 26
/* PCNT_CH1_NEG_MODE_U1 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit1. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U1 0x00000003
#define PCNT_CH1_NEG_MODE_U1_M ((PCNT_CH1_NEG_MODE_U1_V)<<(PCNT_CH1_NEG_MODE_U1_S))
#define PCNT_CH1_NEG_MODE_U1_V 0x3
#define PCNT_CH1_NEG_MODE_U1_S 24
/* PCNT_CH0_LCTRL_MODE_U1 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U1 0x00000003
#define PCNT_CH0_LCTRL_MODE_U1_M ((PCNT_CH0_LCTRL_MODE_U1_V)<<(PCNT_CH0_LCTRL_MODE_U1_S))
#define PCNT_CH0_LCTRL_MODE_U1_V 0x3
#define PCNT_CH0_LCTRL_MODE_U1_S 22
/* PCNT_CH0_HCTRL_MODE_U1 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U1 0x00000003
#define PCNT_CH0_HCTRL_MODE_U1_M ((PCNT_CH0_HCTRL_MODE_U1_V)<<(PCNT_CH0_HCTRL_MODE_U1_S))
#define PCNT_CH0_HCTRL_MODE_U1_V 0x3
#define PCNT_CH0_HCTRL_MODE_U1_S 20
/* PCNT_CH0_POS_MODE_U1 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit1. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U1 0x00000003
#define PCNT_CH0_POS_MODE_U1_M ((PCNT_CH0_POS_MODE_U1_V)<<(PCNT_CH0_POS_MODE_U1_S))
#define PCNT_CH0_POS_MODE_U1_V 0x3
#define PCNT_CH0_POS_MODE_U1_S 18
/* PCNT_CH0_NEG_MODE_U1 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit1. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U1 0x00000003
#define PCNT_CH0_NEG_MODE_U1_M ((PCNT_CH0_NEG_MODE_U1_V)<<(PCNT_CH0_NEG_MODE_U1_S))
#define PCNT_CH0_NEG_MODE_U1_V 0x3
#define PCNT_CH0_NEG_MODE_U1_S 16
/* PCNT_THR_THRES1_EN_U1 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit1's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U1 (BIT(15))
#define PCNT_THR_THRES1_EN_U1_M (BIT(15))
#define PCNT_THR_THRES1_EN_U1_V 0x1
#define PCNT_THR_THRES1_EN_U1_S 15
/* PCNT_THR_THRES0_EN_U1 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit1's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U1 (BIT(14))
#define PCNT_THR_THRES0_EN_U1_M (BIT(14))
#define PCNT_THR_THRES0_EN_U1_V 0x1
#define PCNT_THR_THRES0_EN_U1_S 14
/* PCNT_THR_L_LIM_EN_U1 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit1's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U1 (BIT(13))
#define PCNT_THR_L_LIM_EN_U1_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U1_V 0x1
#define PCNT_THR_L_LIM_EN_U1_S 13
/* PCNT_THR_H_LIM_EN_U1 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit1's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U1 (BIT(12))
#define PCNT_THR_H_LIM_EN_U1_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U1_V 0x1
#define PCNT_THR_H_LIM_EN_U1_S 12
/* PCNT_THR_ZERO_EN_U1 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit1's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U1 (BIT(11))
#define PCNT_THR_ZERO_EN_U1_M (BIT(11))
#define PCNT_THR_ZERO_EN_U1_V 0x1
#define PCNT_THR_ZERO_EN_U1_S 11
/* PCNT_FILTER_EN_U1 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit1.*/
#define PCNT_FILTER_EN_U1 (BIT(10))
#define PCNT_FILTER_EN_U1_M (BIT(10))
#define PCNT_FILTER_EN_U1_V 0x1
#define PCNT_FILTER_EN_U1_S 10
/* PCNT_FILTER_THRES_U1 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit1.*/
#define PCNT_FILTER_THRES_U1 0x000003FF
#define PCNT_FILTER_THRES_U1_M ((PCNT_FILTER_THRES_U1_V)<<(PCNT_FILTER_THRES_U1_S))
#define PCNT_FILTER_THRES_U1_V 0x3FF
#define PCNT_FILTER_THRES_U1_S 0
#define PCNT_U1_CONF1_REG (DR_REG_PCNT_BASE + 0x0010)
/* PCNT_CNT_THRES1_U1 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit1.*/
#define PCNT_CNT_THRES1_U1 0x0000FFFF
#define PCNT_CNT_THRES1_U1_M ((PCNT_CNT_THRES1_U1_V)<<(PCNT_CNT_THRES1_U1_S))
#define PCNT_CNT_THRES1_U1_V 0xFFFF
#define PCNT_CNT_THRES1_U1_S 16
/* PCNT_CNT_THRES0_U1 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit1.*/
#define PCNT_CNT_THRES0_U1 0x0000FFFF
#define PCNT_CNT_THRES0_U1_M ((PCNT_CNT_THRES0_U1_V)<<(PCNT_CNT_THRES0_U1_S))
#define PCNT_CNT_THRES0_U1_V 0xFFFF
#define PCNT_CNT_THRES0_U1_S 0
#define PCNT_U1_CONF2_REG (DR_REG_PCNT_BASE + 0x0014)
/* PCNT_CNT_L_LIM_U1 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit1.*/
#define PCNT_CNT_L_LIM_U1 0x0000FFFF
#define PCNT_CNT_L_LIM_U1_M ((PCNT_CNT_L_LIM_U1_V)<<(PCNT_CNT_L_LIM_U1_S))
#define PCNT_CNT_L_LIM_U1_V 0xFFFF
#define PCNT_CNT_L_LIM_U1_S 16
/* PCNT_CNT_H_LIM_U1 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit1.*/
#define PCNT_CNT_H_LIM_U1 0x0000FFFF
#define PCNT_CNT_H_LIM_U1_M ((PCNT_CNT_H_LIM_U1_V)<<(PCNT_CNT_H_LIM_U1_S))
#define PCNT_CNT_H_LIM_U1_V 0xFFFF
#define PCNT_CNT_H_LIM_U1_S 0
#define PCNT_U2_CONF0_REG (DR_REG_PCNT_BASE + 0x0018)
/* PCNT_CH1_LCTRL_MODE_U2 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U2 0x00000003
#define PCNT_CH1_LCTRL_MODE_U2_M ((PCNT_CH1_LCTRL_MODE_U2_V)<<(PCNT_CH1_LCTRL_MODE_U2_S))
#define PCNT_CH1_LCTRL_MODE_U2_V 0x3
#define PCNT_CH1_LCTRL_MODE_U2_S 30
/* PCNT_CH1_HCTRL_MODE_U2 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U2 0x00000003
#define PCNT_CH1_HCTRL_MODE_U2_M ((PCNT_CH1_HCTRL_MODE_U2_V)<<(PCNT_CH1_HCTRL_MODE_U2_S))
#define PCNT_CH1_HCTRL_MODE_U2_V 0x3
#define PCNT_CH1_HCTRL_MODE_U2_S 28
/* PCNT_CH1_POS_MODE_U2 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit2. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U2 0x00000003
#define PCNT_CH1_POS_MODE_U2_M ((PCNT_CH1_POS_MODE_U2_V)<<(PCNT_CH1_POS_MODE_U2_S))
#define PCNT_CH1_POS_MODE_U2_V 0x3
#define PCNT_CH1_POS_MODE_U2_S 26
/* PCNT_CH1_NEG_MODE_U2 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit2. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U2 0x00000003
#define PCNT_CH1_NEG_MODE_U2_M ((PCNT_CH1_NEG_MODE_U2_V)<<(PCNT_CH1_NEG_MODE_U2_S))
#define PCNT_CH1_NEG_MODE_U2_V 0x3
#define PCNT_CH1_NEG_MODE_U2_S 24
/* PCNT_CH0_LCTRL_MODE_U2 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U2 0x00000003
#define PCNT_CH0_LCTRL_MODE_U2_M ((PCNT_CH0_LCTRL_MODE_U2_V)<<(PCNT_CH0_LCTRL_MODE_U2_S))
#define PCNT_CH0_LCTRL_MODE_U2_V 0x3
#define PCNT_CH0_LCTRL_MODE_U2_S 22
/* PCNT_CH0_HCTRL_MODE_U2 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U2 0x00000003
#define PCNT_CH0_HCTRL_MODE_U2_M ((PCNT_CH0_HCTRL_MODE_U2_V)<<(PCNT_CH0_HCTRL_MODE_U2_S))
#define PCNT_CH0_HCTRL_MODE_U2_V 0x3
#define PCNT_CH0_HCTRL_MODE_U2_S 20
/* PCNT_CH0_POS_MODE_U2 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit2. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U2 0x00000003
#define PCNT_CH0_POS_MODE_U2_M ((PCNT_CH0_POS_MODE_U2_V)<<(PCNT_CH0_POS_MODE_U2_S))
#define PCNT_CH0_POS_MODE_U2_V 0x3
#define PCNT_CH0_POS_MODE_U2_S 18
/* PCNT_CH0_NEG_MODE_U2 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit2. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U2 0x00000003
#define PCNT_CH0_NEG_MODE_U2_M ((PCNT_CH0_NEG_MODE_U2_V)<<(PCNT_CH0_NEG_MODE_U2_S))
#define PCNT_CH0_NEG_MODE_U2_V 0x3
#define PCNT_CH0_NEG_MODE_U2_S 16
/* PCNT_THR_THRES1_EN_U2 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit2's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U2 (BIT(15))
#define PCNT_THR_THRES1_EN_U2_M (BIT(15))
#define PCNT_THR_THRES1_EN_U2_V 0x1
#define PCNT_THR_THRES1_EN_U2_S 15
/* PCNT_THR_THRES0_EN_U2 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit2's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U2 (BIT(14))
#define PCNT_THR_THRES0_EN_U2_M (BIT(14))
#define PCNT_THR_THRES0_EN_U2_V 0x1
#define PCNT_THR_THRES0_EN_U2_S 14
/* PCNT_THR_L_LIM_EN_U2 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit2's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U2 (BIT(13))
#define PCNT_THR_L_LIM_EN_U2_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U2_V 0x1
#define PCNT_THR_L_LIM_EN_U2_S 13
/* PCNT_THR_H_LIM_EN_U2 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit2's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U2 (BIT(12))
#define PCNT_THR_H_LIM_EN_U2_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U2_V 0x1
#define PCNT_THR_H_LIM_EN_U2_S 12
/* PCNT_THR_ZERO_EN_U2 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit2's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U2 (BIT(11))
#define PCNT_THR_ZERO_EN_U2_M (BIT(11))
#define PCNT_THR_ZERO_EN_U2_V 0x1
#define PCNT_THR_ZERO_EN_U2_S 11
/* PCNT_FILTER_EN_U2 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit2.*/
#define PCNT_FILTER_EN_U2 (BIT(10))
#define PCNT_FILTER_EN_U2_M (BIT(10))
#define PCNT_FILTER_EN_U2_V 0x1
#define PCNT_FILTER_EN_U2_S 10
/* PCNT_FILTER_THRES_U2 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit2.*/
#define PCNT_FILTER_THRES_U2 0x000003FF
#define PCNT_FILTER_THRES_U2_M ((PCNT_FILTER_THRES_U2_V)<<(PCNT_FILTER_THRES_U2_S))
#define PCNT_FILTER_THRES_U2_V 0x3FF
#define PCNT_FILTER_THRES_U2_S 0
#define PCNT_U2_CONF1_REG (DR_REG_PCNT_BASE + 0x001c)
/* PCNT_CNT_THRES1_U2 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit2.*/
#define PCNT_CNT_THRES1_U2 0x0000FFFF
#define PCNT_CNT_THRES1_U2_M ((PCNT_CNT_THRES1_U2_V)<<(PCNT_CNT_THRES1_U2_S))
#define PCNT_CNT_THRES1_U2_V 0xFFFF
#define PCNT_CNT_THRES1_U2_S 16
/* PCNT_CNT_THRES0_U2 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit2.*/
#define PCNT_CNT_THRES0_U2 0x0000FFFF
#define PCNT_CNT_THRES0_U2_M ((PCNT_CNT_THRES0_U2_V)<<(PCNT_CNT_THRES0_U2_S))
#define PCNT_CNT_THRES0_U2_V 0xFFFF
#define PCNT_CNT_THRES0_U2_S 0
#define PCNT_U2_CONF2_REG (DR_REG_PCNT_BASE + 0x0020)
/* PCNT_CNT_L_LIM_U2 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit2.*/
#define PCNT_CNT_L_LIM_U2 0x0000FFFF
#define PCNT_CNT_L_LIM_U2_M ((PCNT_CNT_L_LIM_U2_V)<<(PCNT_CNT_L_LIM_U2_S))
#define PCNT_CNT_L_LIM_U2_V 0xFFFF
#define PCNT_CNT_L_LIM_U2_S 16
/* PCNT_CNT_H_LIM_U2 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit2.*/
#define PCNT_CNT_H_LIM_U2 0x0000FFFF
#define PCNT_CNT_H_LIM_U2_M ((PCNT_CNT_H_LIM_U2_V)<<(PCNT_CNT_H_LIM_U2_S))
#define PCNT_CNT_H_LIM_U2_V 0xFFFF
#define PCNT_CNT_H_LIM_U2_S 0
#define PCNT_U3_CONF0_REG (DR_REG_PCNT_BASE + 0x0024)
/* PCNT_CH1_LCTRL_MODE_U3 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U3 0x00000003
#define PCNT_CH1_LCTRL_MODE_U3_M ((PCNT_CH1_LCTRL_MODE_U3_V)<<(PCNT_CH1_LCTRL_MODE_U3_S))
#define PCNT_CH1_LCTRL_MODE_U3_V 0x3
#define PCNT_CH1_LCTRL_MODE_U3_S 30
/* PCNT_CH1_HCTRL_MODE_U3 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U3 0x00000003
#define PCNT_CH1_HCTRL_MODE_U3_M ((PCNT_CH1_HCTRL_MODE_U3_V)<<(PCNT_CH1_HCTRL_MODE_U3_S))
#define PCNT_CH1_HCTRL_MODE_U3_V 0x3
#define PCNT_CH1_HCTRL_MODE_U3_S 28
/* PCNT_CH1_POS_MODE_U3 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit3. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U3 0x00000003
#define PCNT_CH1_POS_MODE_U3_M ((PCNT_CH1_POS_MODE_U3_V)<<(PCNT_CH1_POS_MODE_U3_S))
#define PCNT_CH1_POS_MODE_U3_V 0x3
#define PCNT_CH1_POS_MODE_U3_S 26
/* PCNT_CH1_NEG_MODE_U3 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit3. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U3 0x00000003
#define PCNT_CH1_NEG_MODE_U3_M ((PCNT_CH1_NEG_MODE_U3_V)<<(PCNT_CH1_NEG_MODE_U3_S))
#define PCNT_CH1_NEG_MODE_U3_V 0x3
#define PCNT_CH1_NEG_MODE_U3_S 24
/* PCNT_CH0_LCTRL_MODE_U3 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U3 0x00000003
#define PCNT_CH0_LCTRL_MODE_U3_M ((PCNT_CH0_LCTRL_MODE_U3_V)<<(PCNT_CH0_LCTRL_MODE_U3_S))
#define PCNT_CH0_LCTRL_MODE_U3_V 0x3
#define PCNT_CH0_LCTRL_MODE_U3_S 22
/* PCNT_CH0_HCTRL_MODE_U3 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U3 0x00000003
#define PCNT_CH0_HCTRL_MODE_U3_M ((PCNT_CH0_HCTRL_MODE_U3_V)<<(PCNT_CH0_HCTRL_MODE_U3_S))
#define PCNT_CH0_HCTRL_MODE_U3_V 0x3
#define PCNT_CH0_HCTRL_MODE_U3_S 20
/* PCNT_CH0_POS_MODE_U3 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit3. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U3 0x00000003
#define PCNT_CH0_POS_MODE_U3_M ((PCNT_CH0_POS_MODE_U3_V)<<(PCNT_CH0_POS_MODE_U3_S))
#define PCNT_CH0_POS_MODE_U3_V 0x3
#define PCNT_CH0_POS_MODE_U3_S 18
/* PCNT_CH0_NEG_MODE_U3 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit3. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U3 0x00000003
#define PCNT_CH0_NEG_MODE_U3_M ((PCNT_CH0_NEG_MODE_U3_V)<<(PCNT_CH0_NEG_MODE_U3_S))
#define PCNT_CH0_NEG_MODE_U3_V 0x3
#define PCNT_CH0_NEG_MODE_U3_S 16
/* PCNT_THR_THRES1_EN_U3 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit3's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U3 (BIT(15))
#define PCNT_THR_THRES1_EN_U3_M (BIT(15))
#define PCNT_THR_THRES1_EN_U3_V 0x1
#define PCNT_THR_THRES1_EN_U3_S 15
/* PCNT_THR_THRES0_EN_U3 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit3's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U3 (BIT(14))
#define PCNT_THR_THRES0_EN_U3_M (BIT(14))
#define PCNT_THR_THRES0_EN_U3_V 0x1
#define PCNT_THR_THRES0_EN_U3_S 14
/* PCNT_THR_L_LIM_EN_U3 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit3's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U3 (BIT(13))
#define PCNT_THR_L_LIM_EN_U3_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U3_V 0x1
#define PCNT_THR_L_LIM_EN_U3_S 13
/* PCNT_THR_H_LIM_EN_U3 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit3's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U3 (BIT(12))
#define PCNT_THR_H_LIM_EN_U3_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U3_V 0x1
#define PCNT_THR_H_LIM_EN_U3_S 12
/* PCNT_THR_ZERO_EN_U3 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit3's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U3 (BIT(11))
#define PCNT_THR_ZERO_EN_U3_M (BIT(11))
#define PCNT_THR_ZERO_EN_U3_V 0x1
#define PCNT_THR_ZERO_EN_U3_S 11
/* PCNT_FILTER_EN_U3 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit3.*/
#define PCNT_FILTER_EN_U3 (BIT(10))
#define PCNT_FILTER_EN_U3_M (BIT(10))
#define PCNT_FILTER_EN_U3_V 0x1
#define PCNT_FILTER_EN_U3_S 10
/* PCNT_FILTER_THRES_U3 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit3.*/
#define PCNT_FILTER_THRES_U3 0x000003FF
#define PCNT_FILTER_THRES_U3_M ((PCNT_FILTER_THRES_U3_V)<<(PCNT_FILTER_THRES_U3_S))
#define PCNT_FILTER_THRES_U3_V 0x3FF
#define PCNT_FILTER_THRES_U3_S 0
#define PCNT_U3_CONF1_REG (DR_REG_PCNT_BASE + 0x0028)
/* PCNT_CNT_THRES1_U3 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit3.*/
#define PCNT_CNT_THRES1_U3 0x0000FFFF
#define PCNT_CNT_THRES1_U3_M ((PCNT_CNT_THRES1_U3_V)<<(PCNT_CNT_THRES1_U3_S))
#define PCNT_CNT_THRES1_U3_V 0xFFFF
#define PCNT_CNT_THRES1_U3_S 16
/* PCNT_CNT_THRES0_U3 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit3.*/
#define PCNT_CNT_THRES0_U3 0x0000FFFF
#define PCNT_CNT_THRES0_U3_M ((PCNT_CNT_THRES0_U3_V)<<(PCNT_CNT_THRES0_U3_S))
#define PCNT_CNT_THRES0_U3_V 0xFFFF
#define PCNT_CNT_THRES0_U3_S 0
#define PCNT_U3_CONF2_REG (DR_REG_PCNT_BASE + 0x002c)
/* PCNT_CNT_L_LIM_U3 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit3.*/
#define PCNT_CNT_L_LIM_U3 0x0000FFFF
#define PCNT_CNT_L_LIM_U3_M ((PCNT_CNT_L_LIM_U3_V)<<(PCNT_CNT_L_LIM_U3_S))
#define PCNT_CNT_L_LIM_U3_V 0xFFFF
#define PCNT_CNT_L_LIM_U3_S 16
/* PCNT_CNT_H_LIM_U3 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit3.*/
#define PCNT_CNT_H_LIM_U3 0x0000FFFF
#define PCNT_CNT_H_LIM_U3_M ((PCNT_CNT_H_LIM_U3_V)<<(PCNT_CNT_H_LIM_U3_S))
#define PCNT_CNT_H_LIM_U3_V 0xFFFF
#define PCNT_CNT_H_LIM_U3_S 0
#define PCNT_U4_CONF0_REG (DR_REG_PCNT_BASE + 0x0030)
/* PCNT_CH1_LCTRL_MODE_U4 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U4 0x00000003
#define PCNT_CH1_LCTRL_MODE_U4_M ((PCNT_CH1_LCTRL_MODE_U4_V)<<(PCNT_CH1_LCTRL_MODE_U4_S))
#define PCNT_CH1_LCTRL_MODE_U4_V 0x3
#define PCNT_CH1_LCTRL_MODE_U4_S 30
/* PCNT_CH1_HCTRL_MODE_U4 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U4 0x00000003
#define PCNT_CH1_HCTRL_MODE_U4_M ((PCNT_CH1_HCTRL_MODE_U4_V)<<(PCNT_CH1_HCTRL_MODE_U4_S))
#define PCNT_CH1_HCTRL_MODE_U4_V 0x3
#define PCNT_CH1_HCTRL_MODE_U4_S 28
/* PCNT_CH1_POS_MODE_U4 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit4. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U4 0x00000003
#define PCNT_CH1_POS_MODE_U4_M ((PCNT_CH1_POS_MODE_U4_V)<<(PCNT_CH1_POS_MODE_U4_S))
#define PCNT_CH1_POS_MODE_U4_V 0x3
#define PCNT_CH1_POS_MODE_U4_S 26
/* PCNT_CH1_NEG_MODE_U4 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit4. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U4 0x00000003
#define PCNT_CH1_NEG_MODE_U4_M ((PCNT_CH1_NEG_MODE_U4_V)<<(PCNT_CH1_NEG_MODE_U4_S))
#define PCNT_CH1_NEG_MODE_U4_V 0x3
#define PCNT_CH1_NEG_MODE_U4_S 24
/* PCNT_CH0_LCTRL_MODE_U4 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U4 0x00000003
#define PCNT_CH0_LCTRL_MODE_U4_M ((PCNT_CH0_LCTRL_MODE_U4_V)<<(PCNT_CH0_LCTRL_MODE_U4_S))
#define PCNT_CH0_LCTRL_MODE_U4_V 0x3
#define PCNT_CH0_LCTRL_MODE_U4_S 22
/* PCNT_CH0_HCTRL_MODE_U4 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U4 0x00000003
#define PCNT_CH0_HCTRL_MODE_U4_M ((PCNT_CH0_HCTRL_MODE_U4_V)<<(PCNT_CH0_HCTRL_MODE_U4_S))
#define PCNT_CH0_HCTRL_MODE_U4_V 0x3
#define PCNT_CH0_HCTRL_MODE_U4_S 20
/* PCNT_CH0_POS_MODE_U4 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit4. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U4 0x00000003
#define PCNT_CH0_POS_MODE_U4_M ((PCNT_CH0_POS_MODE_U4_V)<<(PCNT_CH0_POS_MODE_U4_S))
#define PCNT_CH0_POS_MODE_U4_V 0x3
#define PCNT_CH0_POS_MODE_U4_S 18
/* PCNT_CH0_NEG_MODE_U4 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit4. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U4 0x00000003
#define PCNT_CH0_NEG_MODE_U4_M ((PCNT_CH0_NEG_MODE_U4_V)<<(PCNT_CH0_NEG_MODE_U4_S))
#define PCNT_CH0_NEG_MODE_U4_V 0x3
#define PCNT_CH0_NEG_MODE_U4_S 16
/* PCNT_THR_THRES1_EN_U4 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit4's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U4 (BIT(15))
#define PCNT_THR_THRES1_EN_U4_M (BIT(15))
#define PCNT_THR_THRES1_EN_U4_V 0x1
#define PCNT_THR_THRES1_EN_U4_S 15
/* PCNT_THR_THRES0_EN_U4 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit4's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U4 (BIT(14))
#define PCNT_THR_THRES0_EN_U4_M (BIT(14))
#define PCNT_THR_THRES0_EN_U4_V 0x1
#define PCNT_THR_THRES0_EN_U4_S 14
/* PCNT_THR_L_LIM_EN_U4 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit4's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U4 (BIT(13))
#define PCNT_THR_L_LIM_EN_U4_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U4_V 0x1
#define PCNT_THR_L_LIM_EN_U4_S 13
/* PCNT_THR_H_LIM_EN_U4 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit4's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U4 (BIT(12))
#define PCNT_THR_H_LIM_EN_U4_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U4_V 0x1
#define PCNT_THR_H_LIM_EN_U4_S 12
/* PCNT_THR_ZERO_EN_U4 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit4's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U4 (BIT(11))
#define PCNT_THR_ZERO_EN_U4_M (BIT(11))
#define PCNT_THR_ZERO_EN_U4_V 0x1
#define PCNT_THR_ZERO_EN_U4_S 11
/* PCNT_FILTER_EN_U4 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit4.*/
#define PCNT_FILTER_EN_U4 (BIT(10))
#define PCNT_FILTER_EN_U4_M (BIT(10))
#define PCNT_FILTER_EN_U4_V 0x1
#define PCNT_FILTER_EN_U4_S 10
/* PCNT_FILTER_THRES_U4 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit4.*/
#define PCNT_FILTER_THRES_U4 0x000003FF
#define PCNT_FILTER_THRES_U4_M ((PCNT_FILTER_THRES_U4_V)<<(PCNT_FILTER_THRES_U4_S))
#define PCNT_FILTER_THRES_U4_V 0x3FF
#define PCNT_FILTER_THRES_U4_S 0
#define PCNT_U4_CONF1_REG (DR_REG_PCNT_BASE + 0x0034)
/* PCNT_CNT_THRES1_U4 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit4.*/
#define PCNT_CNT_THRES1_U4 0x0000FFFF
#define PCNT_CNT_THRES1_U4_M ((PCNT_CNT_THRES1_U4_V)<<(PCNT_CNT_THRES1_U4_S))
#define PCNT_CNT_THRES1_U4_V 0xFFFF
#define PCNT_CNT_THRES1_U4_S 16
/* PCNT_CNT_THRES0_U4 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit4.*/
#define PCNT_CNT_THRES0_U4 0x0000FFFF
#define PCNT_CNT_THRES0_U4_M ((PCNT_CNT_THRES0_U4_V)<<(PCNT_CNT_THRES0_U4_S))
#define PCNT_CNT_THRES0_U4_V 0xFFFF
#define PCNT_CNT_THRES0_U4_S 0
#define PCNT_U4_CONF2_REG (DR_REG_PCNT_BASE + 0x0038)
/* PCNT_CNT_L_LIM_U4 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit4.*/
#define PCNT_CNT_L_LIM_U4 0x0000FFFF
#define PCNT_CNT_L_LIM_U4_M ((PCNT_CNT_L_LIM_U4_V)<<(PCNT_CNT_L_LIM_U4_S))
#define PCNT_CNT_L_LIM_U4_V 0xFFFF
#define PCNT_CNT_L_LIM_U4_S 16
/* PCNT_CNT_H_LIM_U4 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit4.*/
#define PCNT_CNT_H_LIM_U4 0x0000FFFF
#define PCNT_CNT_H_LIM_U4_M ((PCNT_CNT_H_LIM_U4_V)<<(PCNT_CNT_H_LIM_U4_S))
#define PCNT_CNT_H_LIM_U4_V 0xFFFF
#define PCNT_CNT_H_LIM_U4_S 0
#define PCNT_U5_CONF0_REG (DR_REG_PCNT_BASE + 0x003c)
/* PCNT_CH1_LCTRL_MODE_U5 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U5 0x00000003
#define PCNT_CH1_LCTRL_MODE_U5_M ((PCNT_CH1_LCTRL_MODE_U5_V)<<(PCNT_CH1_LCTRL_MODE_U5_S))
#define PCNT_CH1_LCTRL_MODE_U5_V 0x3
#define PCNT_CH1_LCTRL_MODE_U5_S 30
/* PCNT_CH1_HCTRL_MODE_U5 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U5 0x00000003
#define PCNT_CH1_HCTRL_MODE_U5_M ((PCNT_CH1_HCTRL_MODE_U5_V)<<(PCNT_CH1_HCTRL_MODE_U5_S))
#define PCNT_CH1_HCTRL_MODE_U5_V 0x3
#define PCNT_CH1_HCTRL_MODE_U5_S 28
/* PCNT_CH1_POS_MODE_U5 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit5. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U5 0x00000003
#define PCNT_CH1_POS_MODE_U5_M ((PCNT_CH1_POS_MODE_U5_V)<<(PCNT_CH1_POS_MODE_U5_S))
#define PCNT_CH1_POS_MODE_U5_V 0x3
#define PCNT_CH1_POS_MODE_U5_S 26
/* PCNT_CH1_NEG_MODE_U5 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit5. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U5 0x00000003
#define PCNT_CH1_NEG_MODE_U5_M ((PCNT_CH1_NEG_MODE_U5_V)<<(PCNT_CH1_NEG_MODE_U5_S))
#define PCNT_CH1_NEG_MODE_U5_V 0x3
#define PCNT_CH1_NEG_MODE_U5_S 24
/* PCNT_CH0_LCTRL_MODE_U5 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U5 0x00000003
#define PCNT_CH0_LCTRL_MODE_U5_M ((PCNT_CH0_LCTRL_MODE_U5_V)<<(PCNT_CH0_LCTRL_MODE_U5_S))
#define PCNT_CH0_LCTRL_MODE_U5_V 0x3
#define PCNT_CH0_LCTRL_MODE_U5_S 22
/* PCNT_CH0_HCTRL_MODE_U5 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U5 0x00000003
#define PCNT_CH0_HCTRL_MODE_U5_M ((PCNT_CH0_HCTRL_MODE_U5_V)<<(PCNT_CH0_HCTRL_MODE_U5_S))
#define PCNT_CH0_HCTRL_MODE_U5_V 0x3
#define PCNT_CH0_HCTRL_MODE_U5_S 20
/* PCNT_CH0_POS_MODE_U5 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit5. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U5 0x00000003
#define PCNT_CH0_POS_MODE_U5_M ((PCNT_CH0_POS_MODE_U5_V)<<(PCNT_CH0_POS_MODE_U5_S))
#define PCNT_CH0_POS_MODE_U5_V 0x3
#define PCNT_CH0_POS_MODE_U5_S 18
/* PCNT_CH0_NEG_MODE_U5 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit5. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U5 0x00000003
#define PCNT_CH0_NEG_MODE_U5_M ((PCNT_CH0_NEG_MODE_U5_V)<<(PCNT_CH0_NEG_MODE_U5_S))
#define PCNT_CH0_NEG_MODE_U5_V 0x3
#define PCNT_CH0_NEG_MODE_U5_S 16
/* PCNT_THR_THRES1_EN_U5 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit5's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U5 (BIT(15))
#define PCNT_THR_THRES1_EN_U5_M (BIT(15))
#define PCNT_THR_THRES1_EN_U5_V 0x1
#define PCNT_THR_THRES1_EN_U5_S 15
/* PCNT_THR_THRES0_EN_U5 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit5's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U5 (BIT(14))
#define PCNT_THR_THRES0_EN_U5_M (BIT(14))
#define PCNT_THR_THRES0_EN_U5_V 0x1
#define PCNT_THR_THRES0_EN_U5_S 14
/* PCNT_THR_L_LIM_EN_U5 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit5's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U5 (BIT(13))
#define PCNT_THR_L_LIM_EN_U5_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U5_V 0x1
#define PCNT_THR_L_LIM_EN_U5_S 13
/* PCNT_THR_H_LIM_EN_U5 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit5's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U5 (BIT(12))
#define PCNT_THR_H_LIM_EN_U5_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U5_V 0x1
#define PCNT_THR_H_LIM_EN_U5_S 12
/* PCNT_THR_ZERO_EN_U5 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit5's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U5 (BIT(11))
#define PCNT_THR_ZERO_EN_U5_M (BIT(11))
#define PCNT_THR_ZERO_EN_U5_V 0x1
#define PCNT_THR_ZERO_EN_U5_S 11
/* PCNT_FILTER_EN_U5 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit5.*/
#define PCNT_FILTER_EN_U5 (BIT(10))
#define PCNT_FILTER_EN_U5_M (BIT(10))
#define PCNT_FILTER_EN_U5_V 0x1
#define PCNT_FILTER_EN_U5_S 10
/* PCNT_FILTER_THRES_U5 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit5.*/
#define PCNT_FILTER_THRES_U5 0x000003FF
#define PCNT_FILTER_THRES_U5_M ((PCNT_FILTER_THRES_U5_V)<<(PCNT_FILTER_THRES_U5_S))
#define PCNT_FILTER_THRES_U5_V 0x3FF
#define PCNT_FILTER_THRES_U5_S 0
#define PCNT_U5_CONF1_REG (DR_REG_PCNT_BASE + 0x0040)
/* PCNT_CNT_THRES1_U5 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit5.*/
#define PCNT_CNT_THRES1_U5 0x0000FFFF
#define PCNT_CNT_THRES1_U5_M ((PCNT_CNT_THRES1_U5_V)<<(PCNT_CNT_THRES1_U5_S))
#define PCNT_CNT_THRES1_U5_V 0xFFFF
#define PCNT_CNT_THRES1_U5_S 16
/* PCNT_CNT_THRES0_U5 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit5.*/
#define PCNT_CNT_THRES0_U5 0x0000FFFF
#define PCNT_CNT_THRES0_U5_M ((PCNT_CNT_THRES0_U5_V)<<(PCNT_CNT_THRES0_U5_S))
#define PCNT_CNT_THRES0_U5_V 0xFFFF
#define PCNT_CNT_THRES0_U5_S 0
#define PCNT_U5_CONF2_REG (DR_REG_PCNT_BASE + 0x0044)
/* PCNT_CNT_L_LIM_U5 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit5.*/
#define PCNT_CNT_L_LIM_U5 0x0000FFFF
#define PCNT_CNT_L_LIM_U5_M ((PCNT_CNT_L_LIM_U5_V)<<(PCNT_CNT_L_LIM_U5_S))
#define PCNT_CNT_L_LIM_U5_V 0xFFFF
#define PCNT_CNT_L_LIM_U5_S 16
/* PCNT_CNT_H_LIM_U5 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit5.*/
#define PCNT_CNT_H_LIM_U5 0x0000FFFF
#define PCNT_CNT_H_LIM_U5_M ((PCNT_CNT_H_LIM_U5_V)<<(PCNT_CNT_H_LIM_U5_S))
#define PCNT_CNT_H_LIM_U5_V 0xFFFF
#define PCNT_CNT_H_LIM_U5_S 0
#define PCNT_U6_CONF0_REG (DR_REG_PCNT_BASE + 0x0048)
/* PCNT_CH1_LCTRL_MODE_U6 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U6 0x00000003
#define PCNT_CH1_LCTRL_MODE_U6_M ((PCNT_CH1_LCTRL_MODE_U6_V)<<(PCNT_CH1_LCTRL_MODE_U6_S))
#define PCNT_CH1_LCTRL_MODE_U6_V 0x3
#define PCNT_CH1_LCTRL_MODE_U6_S 30
/* PCNT_CH1_HCTRL_MODE_U6 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U6 0x00000003
#define PCNT_CH1_HCTRL_MODE_U6_M ((PCNT_CH1_HCTRL_MODE_U6_V)<<(PCNT_CH1_HCTRL_MODE_U6_S))
#define PCNT_CH1_HCTRL_MODE_U6_V 0x3
#define PCNT_CH1_HCTRL_MODE_U6_S 28
/* PCNT_CH1_POS_MODE_U6 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit6. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U6 0x00000003
#define PCNT_CH1_POS_MODE_U6_M ((PCNT_CH1_POS_MODE_U6_V)<<(PCNT_CH1_POS_MODE_U6_S))
#define PCNT_CH1_POS_MODE_U6_V 0x3
#define PCNT_CH1_POS_MODE_U6_S 26
/* PCNT_CH1_NEG_MODE_U6 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit6. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U6 0x00000003
#define PCNT_CH1_NEG_MODE_U6_M ((PCNT_CH1_NEG_MODE_U6_V)<<(PCNT_CH1_NEG_MODE_U6_S))
#define PCNT_CH1_NEG_MODE_U6_V 0x3
#define PCNT_CH1_NEG_MODE_U6_S 24
/* PCNT_CH0_LCTRL_MODE_U6 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U6 0x00000003
#define PCNT_CH0_LCTRL_MODE_U6_M ((PCNT_CH0_LCTRL_MODE_U6_V)<<(PCNT_CH0_LCTRL_MODE_U6_S))
#define PCNT_CH0_LCTRL_MODE_U6_V 0x3
#define PCNT_CH0_LCTRL_MODE_U6_S 22
/* PCNT_CH0_HCTRL_MODE_U6 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U6 0x00000003
#define PCNT_CH0_HCTRL_MODE_U6_M ((PCNT_CH0_HCTRL_MODE_U6_V)<<(PCNT_CH0_HCTRL_MODE_U6_S))
#define PCNT_CH0_HCTRL_MODE_U6_V 0x3
#define PCNT_CH0_HCTRL_MODE_U6_S 20
/* PCNT_CH0_POS_MODE_U6 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit6. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U6 0x00000003
#define PCNT_CH0_POS_MODE_U6_M ((PCNT_CH0_POS_MODE_U6_V)<<(PCNT_CH0_POS_MODE_U6_S))
#define PCNT_CH0_POS_MODE_U6_V 0x3
#define PCNT_CH0_POS_MODE_U6_S 18
/* PCNT_CH0_NEG_MODE_U6 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit6. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U6 0x00000003
#define PCNT_CH0_NEG_MODE_U6_M ((PCNT_CH0_NEG_MODE_U6_V)<<(PCNT_CH0_NEG_MODE_U6_S))
#define PCNT_CH0_NEG_MODE_U6_V 0x3
#define PCNT_CH0_NEG_MODE_U6_S 16
/* PCNT_THR_THRES1_EN_U6 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit6's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U6 (BIT(15))
#define PCNT_THR_THRES1_EN_U6_M (BIT(15))
#define PCNT_THR_THRES1_EN_U6_V 0x1
#define PCNT_THR_THRES1_EN_U6_S 15
/* PCNT_THR_THRES0_EN_U6 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit6's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U6 (BIT(14))
#define PCNT_THR_THRES0_EN_U6_M (BIT(14))
#define PCNT_THR_THRES0_EN_U6_V 0x1
#define PCNT_THR_THRES0_EN_U6_S 14
/* PCNT_THR_L_LIM_EN_U6 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit6's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U6 (BIT(13))
#define PCNT_THR_L_LIM_EN_U6_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U6_V 0x1
#define PCNT_THR_L_LIM_EN_U6_S 13
/* PCNT_THR_H_LIM_EN_U6 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit6's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U6 (BIT(12))
#define PCNT_THR_H_LIM_EN_U6_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U6_V 0x1
#define PCNT_THR_H_LIM_EN_U6_S 12
/* PCNT_THR_ZERO_EN_U6 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit6's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U6 (BIT(11))
#define PCNT_THR_ZERO_EN_U6_M (BIT(11))
#define PCNT_THR_ZERO_EN_U6_V 0x1
#define PCNT_THR_ZERO_EN_U6_S 11
/* PCNT_FILTER_EN_U6 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit6.*/
#define PCNT_FILTER_EN_U6 (BIT(10))
#define PCNT_FILTER_EN_U6_M (BIT(10))
#define PCNT_FILTER_EN_U6_V 0x1
#define PCNT_FILTER_EN_U6_S 10
/* PCNT_FILTER_THRES_U6 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit6.*/
#define PCNT_FILTER_THRES_U6 0x000003FF
#define PCNT_FILTER_THRES_U6_M ((PCNT_FILTER_THRES_U6_V)<<(PCNT_FILTER_THRES_U6_S))
#define PCNT_FILTER_THRES_U6_V 0x3FF
#define PCNT_FILTER_THRES_U6_S 0
#define PCNT_U6_CONF1_REG (DR_REG_PCNT_BASE + 0x004c)
/* PCNT_CNT_THRES1_U6 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit6.*/
#define PCNT_CNT_THRES1_U6 0x0000FFFF
#define PCNT_CNT_THRES1_U6_M ((PCNT_CNT_THRES1_U6_V)<<(PCNT_CNT_THRES1_U6_S))
#define PCNT_CNT_THRES1_U6_V 0xFFFF
#define PCNT_CNT_THRES1_U6_S 16
/* PCNT_CNT_THRES0_U6 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit6.*/
#define PCNT_CNT_THRES0_U6 0x0000FFFF
#define PCNT_CNT_THRES0_U6_M ((PCNT_CNT_THRES0_U6_V)<<(PCNT_CNT_THRES0_U6_S))
#define PCNT_CNT_THRES0_U6_V 0xFFFF
#define PCNT_CNT_THRES0_U6_S 0
#define PCNT_U6_CONF2_REG (DR_REG_PCNT_BASE + 0x0050)
/* PCNT_CNT_L_LIM_U6 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit6.*/
#define PCNT_CNT_L_LIM_U6 0x0000FFFF
#define PCNT_CNT_L_LIM_U6_M ((PCNT_CNT_L_LIM_U6_V)<<(PCNT_CNT_L_LIM_U6_S))
#define PCNT_CNT_L_LIM_U6_V 0xFFFF
#define PCNT_CNT_L_LIM_U6_S 16
/* PCNT_CNT_H_LIM_U6 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit6.*/
#define PCNT_CNT_H_LIM_U6 0x0000FFFF
#define PCNT_CNT_H_LIM_U6_M ((PCNT_CNT_H_LIM_U6_V)<<(PCNT_CNT_H_LIM_U6_S))
#define PCNT_CNT_H_LIM_U6_V 0xFFFF
#define PCNT_CNT_H_LIM_U6_S 0
#define PCNT_U7_CONF0_REG (DR_REG_PCNT_BASE + 0x0054)
/* PCNT_CH1_LCTRL_MODE_U7 : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's low control
signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_LCTRL_MODE_U7 0x00000003
#define PCNT_CH1_LCTRL_MODE_U7_M ((PCNT_CH1_LCTRL_MODE_U7_V)<<(PCNT_CH1_LCTRL_MODE_U7_S))
#define PCNT_CH1_LCTRL_MODE_U7_V 0x3
#define PCNT_CH1_LCTRL_MODE_U7_S 30
/* PCNT_CH1_HCTRL_MODE_U7 : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's high
control signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH1_HCTRL_MODE_U7 0x00000003
#define PCNT_CH1_HCTRL_MODE_U7_M ((PCNT_CH1_HCTRL_MODE_U7_V)<<(PCNT_CH1_HCTRL_MODE_U7_S))
#define PCNT_CH1_HCTRL_MODE_U7_V 0x3
#define PCNT_CH1_HCTRL_MODE_U7_S 28
/* PCNT_CH1_POS_MODE_U7 : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
posedge signal for unit7. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH1_POS_MODE_U7 0x00000003
#define PCNT_CH1_POS_MODE_U7_M ((PCNT_CH1_POS_MODE_U7_V)<<(PCNT_CH1_POS_MODE_U7_S))
#define PCNT_CH1_POS_MODE_U7_V 0x3
#define PCNT_CH1_POS_MODE_U7_S 26
/* PCNT_CH1_NEG_MODE_U7 : R/W ;bitpos:[25:24] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel1's input
negedge signal for unit7. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH1_NEG_MODE_U7 0x00000003
#define PCNT_CH1_NEG_MODE_U7_M ((PCNT_CH1_NEG_MODE_U7_V)<<(PCNT_CH1_NEG_MODE_U7_S))
#define PCNT_CH1_NEG_MODE_U7_V 0x3
#define PCNT_CH1_NEG_MODE_U7_S 24
/* PCNT_CH0_LCTRL_MODE_U7 : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's low control
signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_LCTRL_MODE_U7 0x00000003
#define PCNT_CH0_LCTRL_MODE_U7_M ((PCNT_CH0_LCTRL_MODE_U7_V)<<(PCNT_CH0_LCTRL_MODE_U7_S))
#define PCNT_CH0_LCTRL_MODE_U7_V 0x3
#define PCNT_CH0_LCTRL_MODE_U7_S 22
/* PCNT_CH0_HCTRL_MODE_U7 : R/W ;bitpos:[21:20] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's high
control signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden*/
#define PCNT_CH0_HCTRL_MODE_U7 0x00000003
#define PCNT_CH0_HCTRL_MODE_U7_M ((PCNT_CH0_HCTRL_MODE_U7_V)<<(PCNT_CH0_HCTRL_MODE_U7_S))
#define PCNT_CH0_HCTRL_MODE_U7_V 0x3
#define PCNT_CH0_HCTRL_MODE_U7_S 20
/* PCNT_CH0_POS_MODE_U7 : R/W ;bitpos:[19:18] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
posedge signal for unit7. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
#define PCNT_CH0_POS_MODE_U7 0x00000003
#define PCNT_CH0_POS_MODE_U7_M ((PCNT_CH0_POS_MODE_U7_V)<<(PCNT_CH0_POS_MODE_U7_S))
#define PCNT_CH0_POS_MODE_U7_V 0x3
#define PCNT_CH0_POS_MODE_U7_S 18
/* PCNT_CH0_NEG_MODE_U7 : R/W ;bitpos:[17:16] ;default: 2'd0 ; */
/*description: This register is used to control the mode of channel0's input
negedge signal for unit7. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
#define PCNT_CH0_NEG_MODE_U7 0x00000003
#define PCNT_CH0_NEG_MODE_U7_M ((PCNT_CH0_NEG_MODE_U7_V)<<(PCNT_CH0_NEG_MODE_U7_S))
#define PCNT_CH0_NEG_MODE_U7_V 0x3
#define PCNT_CH0_NEG_MODE_U7_S 16
/* PCNT_THR_THRES1_EN_U7 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit7's count with thres1 value .*/
#define PCNT_THR_THRES1_EN_U7 (BIT(15))
#define PCNT_THR_THRES1_EN_U7_M (BIT(15))
#define PCNT_THR_THRES1_EN_U7_V 0x1
#define PCNT_THR_THRES1_EN_U7_S 15
/* PCNT_THR_THRES0_EN_U7 : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: This is the enable bit for comparing unit7's count with thres0 value.*/
#define PCNT_THR_THRES0_EN_U7 (BIT(14))
#define PCNT_THR_THRES0_EN_U7_M (BIT(14))
#define PCNT_THR_THRES0_EN_U7_V 0x1
#define PCNT_THR_THRES0_EN_U7_S 14
/* PCNT_THR_L_LIM_EN_U7 : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit7's count with thr_l_lim value.*/
#define PCNT_THR_L_LIM_EN_U7 (BIT(13))
#define PCNT_THR_L_LIM_EN_U7_M (BIT(13))
#define PCNT_THR_L_LIM_EN_U7_V 0x1
#define PCNT_THR_L_LIM_EN_U7_S 13
/* PCNT_THR_H_LIM_EN_U7 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit7's count with thr_h_lim value.*/
#define PCNT_THR_H_LIM_EN_U7 (BIT(12))
#define PCNT_THR_H_LIM_EN_U7_M (BIT(12))
#define PCNT_THR_H_LIM_EN_U7_V 0x1
#define PCNT_THR_H_LIM_EN_U7_S 12
/* PCNT_THR_ZERO_EN_U7 : R/W ;bitpos:[11] ;default: 1'b1 ; */
/*description: This is the enable bit for comparing unit7's count with 0 value.*/
#define PCNT_THR_ZERO_EN_U7 (BIT(11))
#define PCNT_THR_ZERO_EN_U7_M (BIT(11))
#define PCNT_THR_ZERO_EN_U7_V 0x1
#define PCNT_THR_ZERO_EN_U7_S 11
/* PCNT_FILTER_EN_U7 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: This is the enable bit for filtering input signals for unit7.*/
#define PCNT_FILTER_EN_U7 (BIT(10))
#define PCNT_FILTER_EN_U7_M (BIT(10))
#define PCNT_FILTER_EN_U7_V 0x1
#define PCNT_FILTER_EN_U7_S 10
/* PCNT_FILTER_THRES_U7 : R/W ;bitpos:[9:0] ;default: 10'h10 ; */
/*description: This register is used to filter pluse whose width is smaller
than this value for unit7.*/
#define PCNT_FILTER_THRES_U7 0x000003FF
#define PCNT_FILTER_THRES_U7_M ((PCNT_FILTER_THRES_U7_V)<<(PCNT_FILTER_THRES_U7_S))
#define PCNT_FILTER_THRES_U7_V 0x3FF
#define PCNT_FILTER_THRES_U7_S 0
#define PCNT_U7_CONF1_REG (DR_REG_PCNT_BASE + 0x0058)
/* PCNT_CNT_THRES1_U7 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to configure thres1 value for unit7.*/
#define PCNT_CNT_THRES1_U7 0x0000FFFF
#define PCNT_CNT_THRES1_U7_M ((PCNT_CNT_THRES1_U7_V)<<(PCNT_CNT_THRES1_U7_S))
#define PCNT_CNT_THRES1_U7_V 0xFFFF
#define PCNT_CNT_THRES1_U7_S 16
/* PCNT_CNT_THRES0_U7 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thres0 value for unit7.*/
#define PCNT_CNT_THRES0_U7 0x0000FFFF
#define PCNT_CNT_THRES0_U7_M ((PCNT_CNT_THRES0_U7_V)<<(PCNT_CNT_THRES0_U7_S))
#define PCNT_CNT_THRES0_U7_V 0xFFFF
#define PCNT_CNT_THRES0_U7_S 0
#define PCNT_U7_CONF2_REG (DR_REG_PCNT_BASE + 0x005c)
/* PCNT_CNT_L_LIM_U7 : R/W ;bitpos:[31:16] ;default: 10'h0 ; */
/*description: This register is used to confiugre thr_l_lim value for unit7.*/
#define PCNT_CNT_L_LIM_U7 0x0000FFFF
#define PCNT_CNT_L_LIM_U7_M ((PCNT_CNT_L_LIM_U7_V)<<(PCNT_CNT_L_LIM_U7_S))
#define PCNT_CNT_L_LIM_U7_V 0xFFFF
#define PCNT_CNT_L_LIM_U7_S 16
/* PCNT_CNT_H_LIM_U7 : R/W ;bitpos:[15:0] ;default: 10'h0 ; */
/*description: This register is used to configure thr_h_lim value for unit7.*/
#define PCNT_CNT_H_LIM_U7 0x0000FFFF
#define PCNT_CNT_H_LIM_U7_M ((PCNT_CNT_H_LIM_U7_V)<<(PCNT_CNT_H_LIM_U7_S))
#define PCNT_CNT_H_LIM_U7_V 0xFFFF
#define PCNT_CNT_H_LIM_U7_S 0
#define PCNT_U0_CNT_REG (DR_REG_PCNT_BASE + 0x0060)
/* PCNT_PLUS_CNT_U0 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit0.*/
#define PCNT_PLUS_CNT_U0 0x0000FFFF
#define PCNT_PLUS_CNT_U0_M ((PCNT_PLUS_CNT_U0_V)<<(PCNT_PLUS_CNT_U0_S))
#define PCNT_PLUS_CNT_U0_V 0xFFFF
#define PCNT_PLUS_CNT_U0_S 0
#define PCNT_U1_CNT_REG (DR_REG_PCNT_BASE + 0x0064)
/* PCNT_PLUS_CNT_U1 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit1.*/
#define PCNT_PLUS_CNT_U1 0x0000FFFF
#define PCNT_PLUS_CNT_U1_M ((PCNT_PLUS_CNT_U1_V)<<(PCNT_PLUS_CNT_U1_S))
#define PCNT_PLUS_CNT_U1_V 0xFFFF
#define PCNT_PLUS_CNT_U1_S 0
#define PCNT_U2_CNT_REG (DR_REG_PCNT_BASE + 0x0068)
/* PCNT_PLUS_CNT_U2 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit2.*/
#define PCNT_PLUS_CNT_U2 0x0000FFFF
#define PCNT_PLUS_CNT_U2_M ((PCNT_PLUS_CNT_U2_V)<<(PCNT_PLUS_CNT_U2_S))
#define PCNT_PLUS_CNT_U2_V 0xFFFF
#define PCNT_PLUS_CNT_U2_S 0
#define PCNT_U3_CNT_REG (DR_REG_PCNT_BASE + 0x006c)
/* PCNT_PLUS_CNT_U3 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit3.*/
#define PCNT_PLUS_CNT_U3 0x0000FFFF
#define PCNT_PLUS_CNT_U3_M ((PCNT_PLUS_CNT_U3_V)<<(PCNT_PLUS_CNT_U3_S))
#define PCNT_PLUS_CNT_U3_V 0xFFFF
#define PCNT_PLUS_CNT_U3_S 0
#define PCNT_U4_CNT_REG (DR_REG_PCNT_BASE + 0x0070)
/* PCNT_PLUS_CNT_U4 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit4.*/
#define PCNT_PLUS_CNT_U4 0x0000FFFF
#define PCNT_PLUS_CNT_U4_M ((PCNT_PLUS_CNT_U4_V)<<(PCNT_PLUS_CNT_U4_S))
#define PCNT_PLUS_CNT_U4_V 0xFFFF
#define PCNT_PLUS_CNT_U4_S 0
#define PCNT_U5_CNT_REG (DR_REG_PCNT_BASE + 0x0074)
/* PCNT_PLUS_CNT_U5 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit5.*/
#define PCNT_PLUS_CNT_U5 0x0000FFFF
#define PCNT_PLUS_CNT_U5_M ((PCNT_PLUS_CNT_U5_V)<<(PCNT_PLUS_CNT_U5_S))
#define PCNT_PLUS_CNT_U5_V 0xFFFF
#define PCNT_PLUS_CNT_U5_S 0
#define PCNT_U6_CNT_REG (DR_REG_PCNT_BASE + 0x0078)
/* PCNT_PLUS_CNT_U6 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit6.*/
#define PCNT_PLUS_CNT_U6 0x0000FFFF
#define PCNT_PLUS_CNT_U6_M ((PCNT_PLUS_CNT_U6_V)<<(PCNT_PLUS_CNT_U6_S))
#define PCNT_PLUS_CNT_U6_V 0xFFFF
#define PCNT_PLUS_CNT_U6_S 0
#define PCNT_U7_CNT_REG (DR_REG_PCNT_BASE + 0x007c)
/* PCNT_PLUS_CNT_U7 : RO ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: This register stores the current pulse count value for unit7.*/
#define PCNT_PLUS_CNT_U7 0x0000FFFF
#define PCNT_PLUS_CNT_U7_M ((PCNT_PLUS_CNT_U7_V)<<(PCNT_PLUS_CNT_U7_S))
#define PCNT_PLUS_CNT_U7_V 0xFFFF
#define PCNT_PLUS_CNT_U7_S 0
#define PCNT_INT_RAW_REG (DR_REG_PCNT_BASE + 0x0080)
/* PCNT_CNT_THR_EVENT_U7_INT_RAW : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel7 event.*/
#define PCNT_CNT_THR_EVENT_U7_INT_RAW (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_RAW_M (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U7_INT_RAW_S 7
/* PCNT_CNT_THR_EVENT_U6_INT_RAW : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel6 event.*/
#define PCNT_CNT_THR_EVENT_U6_INT_RAW (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_RAW_M (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U6_INT_RAW_S 6
/* PCNT_CNT_THR_EVENT_U5_INT_RAW : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel5 event.*/
#define PCNT_CNT_THR_EVENT_U5_INT_RAW (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_RAW_M (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U5_INT_RAW_S 5
/* PCNT_CNT_THR_EVENT_U4_INT_RAW : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel4 event.*/
#define PCNT_CNT_THR_EVENT_U4_INT_RAW (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_RAW_M (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U4_INT_RAW_S 4
/* PCNT_CNT_THR_EVENT_U3_INT_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel3 event.*/
#define PCNT_CNT_THR_EVENT_U3_INT_RAW (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_RAW_M (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U3_INT_RAW_S 3
/* PCNT_CNT_THR_EVENT_U2_INT_RAW : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel2 event.*/
#define PCNT_CNT_THR_EVENT_U2_INT_RAW (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_RAW_M (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U2_INT_RAW_S 2
/* PCNT_CNT_THR_EVENT_U1_INT_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel1 event.*/
#define PCNT_CNT_THR_EVENT_U1_INT_RAW (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_RAW_M (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U1_INT_RAW_S 1
/* PCNT_CNT_THR_EVENT_U0_INT_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: This is the interrupt raw bit for channel0 event.*/
#define PCNT_CNT_THR_EVENT_U0_INT_RAW (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_RAW_M (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_RAW_V 0x1
#define PCNT_CNT_THR_EVENT_U0_INT_RAW_S 0
#define PCNT_INT_ST_REG (DR_REG_PCNT_BASE + 0x0084)
/* PCNT_CNT_THR_EVENT_U7_INT_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel7 event.*/
#define PCNT_CNT_THR_EVENT_U7_INT_ST (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_ST_M (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U7_INT_ST_S 7
/* PCNT_CNT_THR_EVENT_U6_INT_ST : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel6 event.*/
#define PCNT_CNT_THR_EVENT_U6_INT_ST (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_ST_M (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U6_INT_ST_S 6
/* PCNT_CNT_THR_EVENT_U5_INT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel5 event.*/
#define PCNT_CNT_THR_EVENT_U5_INT_ST (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_ST_M (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U5_INT_ST_S 5
/* PCNT_CNT_THR_EVENT_U4_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel4 event.*/
#define PCNT_CNT_THR_EVENT_U4_INT_ST (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_ST_M (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U4_INT_ST_S 4
/* PCNT_CNT_THR_EVENT_U3_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel3 event.*/
#define PCNT_CNT_THR_EVENT_U3_INT_ST (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_ST_M (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U3_INT_ST_S 3
/* PCNT_CNT_THR_EVENT_U2_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel2 event.*/
#define PCNT_CNT_THR_EVENT_U2_INT_ST (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_ST_M (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U2_INT_ST_S 2
/* PCNT_CNT_THR_EVENT_U1_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel1 event.*/
#define PCNT_CNT_THR_EVENT_U1_INT_ST (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_ST_M (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U1_INT_ST_S 1
/* PCNT_CNT_THR_EVENT_U0_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: This is the interrupt status bit for channel0 event.*/
#define PCNT_CNT_THR_EVENT_U0_INT_ST (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_ST_M (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_ST_V 0x1
#define PCNT_CNT_THR_EVENT_U0_INT_ST_S 0
#define PCNT_INT_ENA_REG (DR_REG_PCNT_BASE + 0x0088)
/* PCNT_CNT_THR_EVENT_U7_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel7 event.*/
#define PCNT_CNT_THR_EVENT_U7_INT_ENA (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_ENA_M (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U7_INT_ENA_S 7
/* PCNT_CNT_THR_EVENT_U6_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel6 event.*/
#define PCNT_CNT_THR_EVENT_U6_INT_ENA (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_ENA_M (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U6_INT_ENA_S 6
/* PCNT_CNT_THR_EVENT_U5_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel5 event.*/
#define PCNT_CNT_THR_EVENT_U5_INT_ENA (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_ENA_M (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U5_INT_ENA_S 5
/* PCNT_CNT_THR_EVENT_U4_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel4 event.*/
#define PCNT_CNT_THR_EVENT_U4_INT_ENA (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_ENA_M (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U4_INT_ENA_S 4
/* PCNT_CNT_THR_EVENT_U3_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel3 event.*/
#define PCNT_CNT_THR_EVENT_U3_INT_ENA (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_ENA_M (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U3_INT_ENA_S 3
/* PCNT_CNT_THR_EVENT_U2_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel2 event.*/
#define PCNT_CNT_THR_EVENT_U2_INT_ENA (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_ENA_M (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U2_INT_ENA_S 2
/* PCNT_CNT_THR_EVENT_U1_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel1 event.*/
#define PCNT_CNT_THR_EVENT_U1_INT_ENA (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_ENA_M (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U1_INT_ENA_S 1
/* PCNT_CNT_THR_EVENT_U0_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: This is the interrupt enable bit for channel0 event.*/
#define PCNT_CNT_THR_EVENT_U0_INT_ENA (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_ENA_M (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_ENA_V 0x1
#define PCNT_CNT_THR_EVENT_U0_INT_ENA_S 0
#define PCNT_INT_CLR_REG (DR_REG_PCNT_BASE + 0x008c)
/* PCNT_CNT_THR_EVENT_U7_INT_CLR : WO ;bitpos:[7] ;default: 1'b0 ; */
/*description: Set this bit to clear channel7 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U7_INT_CLR (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_CLR_M (BIT(7))
#define PCNT_CNT_THR_EVENT_U7_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U7_INT_CLR_S 7
/* PCNT_CNT_THR_EVENT_U6_INT_CLR : WO ;bitpos:[6] ;default: 1'b0 ; */
/*description: Set this bit to clear channel6 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U6_INT_CLR (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_CLR_M (BIT(6))
#define PCNT_CNT_THR_EVENT_U6_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U6_INT_CLR_S 6
/* PCNT_CNT_THR_EVENT_U5_INT_CLR : WO ;bitpos:[5] ;default: 1'b0 ; */
/*description: Set this bit to clear channel5 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U5_INT_CLR (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_CLR_M (BIT(5))
#define PCNT_CNT_THR_EVENT_U5_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U5_INT_CLR_S 5
/* PCNT_CNT_THR_EVENT_U4_INT_CLR : WO ;bitpos:[4] ;default: 1'b0 ; */
/*description: Set this bit to clear channel4 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U4_INT_CLR (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_CLR_M (BIT(4))
#define PCNT_CNT_THR_EVENT_U4_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U4_INT_CLR_S 4
/* PCNT_CNT_THR_EVENT_U3_INT_CLR : WO ;bitpos:[3] ;default: 1'b0 ; */
/*description: Set this bit to clear channel3 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U3_INT_CLR (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_CLR_M (BIT(3))
#define PCNT_CNT_THR_EVENT_U3_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U3_INT_CLR_S 3
/* PCNT_CNT_THR_EVENT_U2_INT_CLR : WO ;bitpos:[2] ;default: 1'b0 ; */
/*description: Set this bit to clear channel2 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U2_INT_CLR (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_CLR_M (BIT(2))
#define PCNT_CNT_THR_EVENT_U2_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U2_INT_CLR_S 2
/* PCNT_CNT_THR_EVENT_U1_INT_CLR : WO ;bitpos:[1] ;default: 1'b0 ; */
/*description: Set this bit to clear channel1 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U1_INT_CLR (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_CLR_M (BIT(1))
#define PCNT_CNT_THR_EVENT_U1_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U1_INT_CLR_S 1
/* PCNT_CNT_THR_EVENT_U0_INT_CLR : WO ;bitpos:[0] ;default: 1'b0 ; */
/*description: Set this bit to clear channel0 event interrupt.*/
#define PCNT_CNT_THR_EVENT_U0_INT_CLR (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_CLR_M (BIT(0))
#define PCNT_CNT_THR_EVENT_U0_INT_CLR_V 0x1
#define PCNT_CNT_THR_EVENT_U0_INT_CLR_S 0
#define PCNT_U0_STATUS_REG (DR_REG_PCNT_BASE + 0x0090)
/* PCNT_CORE_STATUS_U0 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U0 0xFFFFFFFF
#define PCNT_CORE_STATUS_U0_M ((PCNT_CORE_STATUS_U0_V)<<(PCNT_CORE_STATUS_U0_S))
#define PCNT_CORE_STATUS_U0_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U0_S 0
#define PCNT_U1_STATUS_REG (DR_REG_PCNT_BASE + 0x0094)
/* PCNT_CORE_STATUS_U1 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U1 0xFFFFFFFF
#define PCNT_CORE_STATUS_U1_M ((PCNT_CORE_STATUS_U1_V)<<(PCNT_CORE_STATUS_U1_S))
#define PCNT_CORE_STATUS_U1_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U1_S 0
#define PCNT_U2_STATUS_REG (DR_REG_PCNT_BASE + 0x0098)
/* PCNT_CORE_STATUS_U2 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U2 0xFFFFFFFF
#define PCNT_CORE_STATUS_U2_M ((PCNT_CORE_STATUS_U2_V)<<(PCNT_CORE_STATUS_U2_S))
#define PCNT_CORE_STATUS_U2_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U2_S 0
#define PCNT_U3_STATUS_REG (DR_REG_PCNT_BASE + 0x009c)
/* PCNT_CORE_STATUS_U3 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U3 0xFFFFFFFF
#define PCNT_CORE_STATUS_U3_M ((PCNT_CORE_STATUS_U3_V)<<(PCNT_CORE_STATUS_U3_S))
#define PCNT_CORE_STATUS_U3_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U3_S 0
#define PCNT_U4_STATUS_REG (DR_REG_PCNT_BASE + 0x00a0)
/* PCNT_CORE_STATUS_U4 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U4 0xFFFFFFFF
#define PCNT_CORE_STATUS_U4_M ((PCNT_CORE_STATUS_U4_V)<<(PCNT_CORE_STATUS_U4_S))
#define PCNT_CORE_STATUS_U4_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U4_S 0
#define PCNT_U5_STATUS_REG (DR_REG_PCNT_BASE + 0x00a4)
/* PCNT_CORE_STATUS_U5 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U5 0xFFFFFFFF
#define PCNT_CORE_STATUS_U5_M ((PCNT_CORE_STATUS_U5_V)<<(PCNT_CORE_STATUS_U5_S))
#define PCNT_CORE_STATUS_U5_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U5_S 0
#define PCNT_U6_STATUS_REG (DR_REG_PCNT_BASE + 0x00a8)
/* PCNT_CORE_STATUS_U6 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U6 0xFFFFFFFF
#define PCNT_CORE_STATUS_U6_M ((PCNT_CORE_STATUS_U6_V)<<(PCNT_CORE_STATUS_U6_S))
#define PCNT_CORE_STATUS_U6_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U6_S 0
#define PCNT_U7_STATUS_REG (DR_REG_PCNT_BASE + 0x00ac)
/* PCNT_CORE_STATUS_U7 : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define PCNT_CORE_STATUS_U7 0xFFFFFFFF
#define PCNT_CORE_STATUS_U7_M ((PCNT_CORE_STATUS_U7_V)<<(PCNT_CORE_STATUS_U7_S))
#define PCNT_CORE_STATUS_U7_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U7_S 0
#define PCNT_CTRL_REG (DR_REG_PCNT_BASE + 0x00b0)
/* PCNT_CLK_EN : R/W ;bitpos:[16] ;default: 1'b0 ; */
/*description: */
#define PCNT_CLK_EN (BIT(16))
#define PCNT_CLK_EN_M (BIT(16))
#define PCNT_CLK_EN_V 0x1
#define PCNT_CLK_EN_S 16
/* PCNT_CNT_PAUSE_U7 : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: Set this bit to pause unit7's counter.*/
#define PCNT_CNT_PAUSE_U7 (BIT(15))
#define PCNT_CNT_PAUSE_U7_M (BIT(15))
#define PCNT_CNT_PAUSE_U7_V 0x1
#define PCNT_CNT_PAUSE_U7_S 15
/* PCNT_PLUS_CNT_RST_U7 : R/W ;bitpos:[14] ;default: 1'b1 ; */
/*description: Set this bit to clear unit7's counter.*/
#define PCNT_PLUS_CNT_RST_U7 (BIT(14))
#define PCNT_PLUS_CNT_RST_U7_M (BIT(14))
#define PCNT_PLUS_CNT_RST_U7_V 0x1
#define PCNT_PLUS_CNT_RST_U7_S 14
/* PCNT_CNT_PAUSE_U6 : R/W ;bitpos:[13] ;default: 1'b0 ; */
/*description: Set this bit to pause unit6's counter.*/
#define PCNT_CNT_PAUSE_U6 (BIT(13))
#define PCNT_CNT_PAUSE_U6_M (BIT(13))
#define PCNT_CNT_PAUSE_U6_V 0x1
#define PCNT_CNT_PAUSE_U6_S 13
/* PCNT_PLUS_CNT_RST_U6 : R/W ;bitpos:[12] ;default: 1'b1 ; */
/*description: Set this bit to clear unit6's counter.*/
#define PCNT_PLUS_CNT_RST_U6 (BIT(12))
#define PCNT_PLUS_CNT_RST_U6_M (BIT(12))
#define PCNT_PLUS_CNT_RST_U6_V 0x1
#define PCNT_PLUS_CNT_RST_U6_S 12
/* PCNT_CNT_PAUSE_U5 : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: Set this bit to pause unit5's counter.*/
#define PCNT_CNT_PAUSE_U5 (BIT(11))
#define PCNT_CNT_PAUSE_U5_M (BIT(11))
#define PCNT_CNT_PAUSE_U5_V 0x1
#define PCNT_CNT_PAUSE_U5_S 11
/* PCNT_PLUS_CNT_RST_U5 : R/W ;bitpos:[10] ;default: 1'b1 ; */
/*description: Set this bit to clear unit5's counter.*/
#define PCNT_PLUS_CNT_RST_U5 (BIT(10))
#define PCNT_PLUS_CNT_RST_U5_M (BIT(10))
#define PCNT_PLUS_CNT_RST_U5_V 0x1
#define PCNT_PLUS_CNT_RST_U5_S 10
/* PCNT_CNT_PAUSE_U4 : R/W ;bitpos:[9] ;default: 1'b0 ; */
/*description: Set this bit to pause unit4's counter.*/
#define PCNT_CNT_PAUSE_U4 (BIT(9))
#define PCNT_CNT_PAUSE_U4_M (BIT(9))
#define PCNT_CNT_PAUSE_U4_V 0x1
#define PCNT_CNT_PAUSE_U4_S 9
/* PCNT_PLUS_CNT_RST_U4 : R/W ;bitpos:[8] ;default: 1'b1 ; */
/*description: Set this bit to clear unit4's counter.*/
#define PCNT_PLUS_CNT_RST_U4 (BIT(8))
#define PCNT_PLUS_CNT_RST_U4_M (BIT(8))
#define PCNT_PLUS_CNT_RST_U4_V 0x1
#define PCNT_PLUS_CNT_RST_U4_S 8
/* PCNT_CNT_PAUSE_U3 : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: Set this bit to pause unit3's counter.*/
#define PCNT_CNT_PAUSE_U3 (BIT(7))
#define PCNT_CNT_PAUSE_U3_M (BIT(7))
#define PCNT_CNT_PAUSE_U3_V 0x1
#define PCNT_CNT_PAUSE_U3_S 7
/* PCNT_PLUS_CNT_RST_U3 : R/W ;bitpos:[6] ;default: 1'b1 ; */
/*description: Set this bit to clear unit3's counter.*/
#define PCNT_PLUS_CNT_RST_U3 (BIT(6))
#define PCNT_PLUS_CNT_RST_U3_M (BIT(6))
#define PCNT_PLUS_CNT_RST_U3_V 0x1
#define PCNT_PLUS_CNT_RST_U3_S 6
/* PCNT_CNT_PAUSE_U2 : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: Set this bit to pause unit2's counter.*/
#define PCNT_CNT_PAUSE_U2 (BIT(5))
#define PCNT_CNT_PAUSE_U2_M (BIT(5))
#define PCNT_CNT_PAUSE_U2_V 0x1
#define PCNT_CNT_PAUSE_U2_S 5
/* PCNT_PLUS_CNT_RST_U2 : R/W ;bitpos:[4] ;default: 1'b1 ; */
/*description: Set this bit to clear unit2's counter.*/
#define PCNT_PLUS_CNT_RST_U2 (BIT(4))
#define PCNT_PLUS_CNT_RST_U2_M (BIT(4))
#define PCNT_PLUS_CNT_RST_U2_V 0x1
#define PCNT_PLUS_CNT_RST_U2_S 4
/* PCNT_CNT_PAUSE_U1 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: Set this bit to pause unit1's counter.*/
#define PCNT_CNT_PAUSE_U1 (BIT(3))
#define PCNT_CNT_PAUSE_U1_M (BIT(3))
#define PCNT_CNT_PAUSE_U1_V 0x1
#define PCNT_CNT_PAUSE_U1_S 3
/* PCNT_PLUS_CNT_RST_U1 : R/W ;bitpos:[2] ;default: 1'b1 ; */
/*description: Set this bit to clear unit1's counter.*/
#define PCNT_PLUS_CNT_RST_U1 (BIT(2))
#define PCNT_PLUS_CNT_RST_U1_M (BIT(2))
#define PCNT_PLUS_CNT_RST_U1_V 0x1
#define PCNT_PLUS_CNT_RST_U1_S 2
/* PCNT_CNT_PAUSE_U0 : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: Set this bit to pause unit0's counter.*/
#define PCNT_CNT_PAUSE_U0 (BIT(1))
#define PCNT_CNT_PAUSE_U0_M (BIT(1))
#define PCNT_CNT_PAUSE_U0_V 0x1
#define PCNT_CNT_PAUSE_U0_S 1
/* PCNT_PLUS_CNT_RST_U0 : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: Set this bit to clear unit0's counter.*/
#define PCNT_PLUS_CNT_RST_U0 (BIT(0))
#define PCNT_PLUS_CNT_RST_U0_M (BIT(0))
#define PCNT_PLUS_CNT_RST_U0_V 0x1
#define PCNT_PLUS_CNT_RST_U0_S 0
#define PCNT_DATE_REG (DR_REG_PCNT_BASE + 0x00fc)
/* PCNT_DATE : R/W ;bitpos:[31:0] ;default: 32'h14122600 ; */
/*description: */
#define PCNT_DATE 0xFFFFFFFF
#define PCNT_DATE_M ((PCNT_DATE_V)<<(PCNT_DATE_S))
#define PCNT_DATE_V 0xFFFFFFFF
#define PCNT_DATE_S 0
#endif /*_SOC_PCNT_REG_H_ */